Forwarding Rates are not accurate

Hi,
Yesterday I activated forwarding calls, and I have two questions :
Rates to United Stats is 2.3¢/min
and when I received calls they charged me $0.8 per min !!!!!!!!!!!!
https://dl.dropboxusercontent.com/u/13684246/Skype​2.jpg
The second question is :
couples of my friends reported that after skype starts ringing for few seconds, It doesn't forward their call to my phone properly !!! It stops ringing when It supposedly forwarding their call to me !!!

Hi,
According to your post, my understanding is that search results are not accurate.
I recommend to run a full crawl and then to check whether the search results are correct.
If your incremental crawl is running, it may happen that, when you are viewing the data in the search result web part, the newly added content are not crawled yet.
So, after the content are updated, wait for some time.
Let your incremental crawl finish. Then view the results on the page.
More information:
Understanding how search results are displayed in SharePoint Server 2013
Searching new content with SharePoint Search
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Similar Messages

  • Search results are not accurate

    hi,
    am facing a unique issue in SP 2013. Whenever we search for a search criteria the results returned is not accurate always. Every time we navigate across pages, the search results change which is not
    a desired behavior. However we also noticed that the refiner panel does not change as well and it retains the old count which leads to inconsistent results when user selects a criteria from the refiner.
     any pointers /  helpful links  regarding this issue, if any anyone has surfaced,  is highly appreciated!  
    Das

    Hi,
    According to your post, my understanding is that search results are not accurate.
    I recommend to run a full crawl and then to check whether the search results are correct.
    If your incremental crawl is running, it may happen that, when you are viewing the data in the search result web part, the newly added content are not crawled yet.
    So, after the content are updated, wait for some time.
    Let your incremental crawl finish. Then view the results on the page.
    More information:
    Understanding how search results are displayed in SharePoint Server 2013
    Searching new content with SharePoint Search
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • Excise rates are not updated

    Hi friends
    When i am creating ARE3 document, in item details Duty rates tabe- excise rates are showing 0, whereas Duty values are coming,
    I have checked in table j_1iexcdtl - duty rates are not updated and duty values are updated
    How to update the table j_1iexcdtl
    Thanx and Regards
    srini

    Dear MBS
    Thanks for reply
    I am doing deemed export process
    I am using TAXINN calculation procedure and pricing procedure was ZDEEM.
    as you said i have already done the classify condition types as below
    ZDEEM - JEXP - BED percentage
    ZDEEM - JECS - ECS percentage
    ZDEEM - JA1X - AT1 percentatge
    I have checked the table and it was updated,
    now i am trying to create ARE3 document but the values are not coming into ARE3 document, only ECS percentage is coming and all the values are showing 0
    and how to resolve the issue
    Regard
    srini

  • Report parameter startdate has a defaultvalue or a valid value that depends on the report parameter startdate forward dependencies are not valid

    Hi,
    Am trying to develop a report the parameter has an issue, it gives me an error.
    There are 2 parameter (1st is Date range like start and end date and 2nd is Loan number)
    When ever I select date range the Loan number parameter should go blank. If I input a loan number then date range should go blank. 
    What should I do. Please help
    ERROR --report parameter startdate has a defaultvalue or a valid value that depends on the report parameter startdate forward dependencies are not valid

    Hi Kay_MD,
    If there are only two parameters, we can use first parameter charge the second one, but the second one cannot charge the first one in turn. Because parameter forward dependencies are not valid. To achieve your requirement, we can create another parameter
    to control Date_range and Loan_number parameters. For more details, please see:
    Add a parameter named ReportParameter1 with two available values: Date_range and Loan_number.
    Use the following expression as the default value in Date_range parameter:
    =iif(Parameters!ReportParameter.Value="Date_range",1,"") (1 means a useless value)
    Use the following expression as the default value in Loan_number parameter:
    =iif(Parameters!ReportParameter.Value="Loan_number",1,"") (1 means a useless value)
    Please note that the Date_range and Loan_number parameters should enable Allow blank value (“”), and the blank values should also be contained in available values.
    If there are any other questions, please feel free to let me know.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • When i print out a color photo the colors are not accurate

    I have a new envy110 series CQ811A. I have a windows 7 64-bit laptop. There are no error messages and the Envy works great but when i print a picture off of a web site the colors are not accurate and i mean none of them. i have returned one printer already but this one is doing the same thing. i really like this printer but if it won't print the colors correctly  i don't know what i will do. I also have a HP C4280 All In One Photo Smart and whatever is printed off the colors are great it just is not wireless. I have tried everything and nothing helps. Is there a solution

    Hi easyneez5!
       Sorry to hear it's not printing web pages so well.
     I do have a suggestion, that may or may not align with the way your are used to printing web pages; HP has a new and improved application for printing web page content; HP Smart Print.
       It's supported on IE (most versions) and can do some neat tricks: http://www8.hp.com/us/en/partner/microsoft/bing-bar-for-hp/smart-print.html
      There are also other potential 'tweaks' you can try in the [Printing Preferences] / [Advanced]: Image Color Managment; You might try setting it from 'ICM Handled by Host System' (default) to 'ICM Handled by Printer' or even 'ICM Disabled'.
       Again, this is merely a potential way to check to see if this helps get those colors right; and remember your settings before you change them.
      Hope this helps
    Regards,
    HardCopy (I am employed by HP) [If this was helpful, please mark this 'Solved' or 'Accept as Solution' so others can find this too]
    How to Give Kudos | How to mark as Solved

  • TS1717 when trying to import cd the following message appears "the current encoder settings for bit rate and sample rate are not valid for this file"?

    Trying to import cd when this message appears "the current encoder settings for bit rate and sample rate are not valid for this file".  Any suggestions?

    Thanks so very much.  I chose MP3 and Download and it is working beautifully.  Have a wonderful day and it is so nice of you to get right back to me.  I'm trying to cut a DVD for my grandson's grad party and I got most of the photos and didn't have any music since I lost everything in a clean install.  Could hug you!

  • Excise duty rates are not displayed in J1IEX

    Dear friends,
                       Excise duty rates (BED, ECS, SECESS) are not displayed in item level in excise invoice J1IEX, But excise values are updated correctly. I have maintained duty rates in J1ID. Kindly give your valuable inputs.
    Thanks and Regards
    ETR.

    Hi Maladri,
                   Thanks for your reply.
    I have maintained my condition types BED, ECS, SEcess in respective fieslds of BED Condition, ECS condition, SEcess condition already, eventhough the % not updated in J1IEX Excise invoices.
    But it has updated 10 days before all values came properly in J1IEX.
    Can you explain which condition type we have to maintain in BED %, ECS%, SEcess % in Maintain excise defaults, I didnt maintain any condition types there. If it is the reason then how it updated correctly 10 days before?
    Kindly guide me
    Thanks and Regards
    ETR

  • What happened to my back button? Now when I'm browsing on facebook, or any other site, the back/forward buttons are not highlighted to be able to use them?

    When I am surfing the net, I have always been able to use my back/forward buttons. Now all of a sudden, they are not available to use, you can still see them, but they are grey, not black, like they once were so that I could click them to go back to a previous page, or forward once I've went back? I don't know what's the problem. I did the most recent firefox update that was sent to me recently. But just noticed this problem today. Thanks for your help.

    A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
    *http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode

  • Close, new, back, forward icons are not shown

    Close, new, back, forward icons in firefox are not shown, so it makes difficult to use firefox. I am using latest firefox in ubuntu 11.04.
    Already asked here but no response :( superuser.com/questions/559381/in-firefox-back-tab-close-new-tab-icon-is-not-shown I have posted screenshot there, It will be helpful so posting the link here.

    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
    Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
    To Reset Firefox do the following:
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox" button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!

  • Validity of exchange rates are not considered in APO DP planning books

    Dear SAP Gurus
    There are couple of posts on this topic without any conclusive reply and so I am posting this again.
    We plan and manage data in multiple currencies and wish to maintain the same in APO DP. We have defined an exchange rate type in the planning area  which is used for planning purposes. Please note that we have defined only one planning area  for all global products hence data is stored in one currency only.Exchange rates between different currencies for this exchange rate type are maintained in ECC and then transferred to APO via RSA1 using standard functionality. While exchange rates are maintained with validity (valid from date) in this table, APO DP planning books only consider latest exchange rates. This behaviour changes the data in the planning book every time there is a change in the exchange rates and is a complete nonsense.
    I believe there is a macro function CURR_CONV_FACTOR() which can be used to bring exchange rates as key figures in the planning book based on validity but given that this macro works only between 2 exchange rates and we use 10 different currencies, its not feasible to use this macro function for all combinations.
    Is there any other way to have exchange rates based on validity ? Does SAP has any guidelines / best practice on how to handle multiple currency scenarios in DP.
    We are on APO V5.1.
    Thanks
    Zorba

    Dear Nitish
    Thanks for the message.
    Unfortunately your observation is not correct. If you change an exchange rate with future validity,
    currency data in the entire horizon (past and future) adopts to that exchange rate.
    It doesn't matter whether KF is ready for input or not as data is stored in any one currency only in PA and conversion happen only when you change the currency in the planning book (column 0)
    Do some more testing and you will notice the above behaviour.
    btw, which version of SCM are you on ?
    Cheers
    Zorba, the Budha

  • HT202570 iPhone map navigation are not accurate compared to the actual location

    The navigation arrow is always late compared to the actual location. its late around 3 to 4 seconds and I have tried on the two different iPhones that with the same result I reset location settings I reset the phone but no luck.
    does anybody have the same problem and any ideas how to resolve them?

    The co-ordinates you posted are not very accurate (hopefully you edited them), there probably should be more digits after the decimal point for greater accuracy.
    It seems like Apple Maps can search for Lat/Long but is unable to show it for a dropped pin. I'd suggest you get another app from the store…
    https://itunes.apple.com/gb/app/find-my-latitude-longitude/id668745605
    https://itunes.apple.com/gb/app/location+/id482094847
    There are many so search around
    It's also worth noting the location services doesn't just use GPS it also uses wifi & cellular towers to get a rough location in situations where GPS is not available (like indoors). GPS also takes a while to get a true lock, it can be upto 12.5 minutes because go how the satellites work. You will need to maintain a clear view of the sky for long enough to get accurate values.
    Assisted GPS - Wikipedia, the free encyclopedia
    P.S. Google maps in a desktop browser will show lat & long values, just be aware that there are different co-ordinate systems too - if things don't work make sure you are using the correct one

  • High sampling rate is not accurate

    Dear alls,
    Any one know why the time loop is not accurate at defined period at the RealTime Trace Viewer ? In figure of VI, I set the period for the time loop is 250 us, but when I analyze in Real time Trace Viewer, it shows the real period time about 676 us. That means my data acquisition will be sampled in wrong sampling rate.
    Could you give me some explane, please? And how can I solve this problem? I tested this code with MyRIO board.
    Best Regards,
    Kien 

    crossrulz wrote:
    Why do you have a wait in your timed loop?  The point of the Timed Loop is to state the loop rate.
     ??? Bigger problems than that!  Why do you have any timing other that the TASK timing? And really, The task timing is most likely the loop rate.
    Can you post your actual VI?  I suspect something else is happening here that we cannot see (configurations, channels used, etc).
    And a snip of the Task needs posting

  • Forwarded calls are not "call-parked"

    Dear Lync experts,
    please could You help me that the following scenario is not possible or I need to change some config parameter:
    - there are two extensions ("A" and "B")
    - a call park group was defined and both extension were added to this call-park group (call pickup group)
    - extension "A" was forwarded to extension "B" (using Lync client- Call Forwarding - Forward my call to- Delegate "B")
    - there is an incoming call to "A", it is ringing at "B" (because of the forward option), but dialing the call-park-group number we are not able to pickup this call.... I do not understand why?!
    Thanks in advance:
    Norbert

    Hi,
    Would you please tell us why you want to forward call to another account in the same call park group?
    Base on my understanding, if cancel the call forwarding, other users could pick up the call. Please check if it works after cancelling call forwarding setting. Please check if the issue still happen when cancelling call forwarding.
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • Percentage Overhead Rates are not capture with Transport request

    Hi,
    I have defined Percentage Overheads rate in KZZ2 and assigned the same  into Costing Sheet.But while saving the transport reqest in to QAS client,It is throwing the below error.Kindly help me in solving this issue.
    Individual entries cannot be put into the change request
    Individual entries cannot be put into the change request
    Message no. SV141
    Diagnosis
    For technical reasons, the entries cannot be fully specified in the change request. There are two possible reasons for this:
    1. The key of an entry is longer than 120 characters. All entries whose keys match up to character 119, are then copied into the change request, rather than an individual entry.
    2. The key of an entry contains fields of special data types, for example, packed numbers. The key can only be specified in the change request up to the first such field from the left.
    all entries whose keys match up to character 238 are copied into the change request, rather than a single entry.
    System response
    The selected entry is copied into the change request correctly, but other entries may be copied as well.
    Please advice me.
    Thanks
    Sunitha

    Hi Sunita,
    I am also facing the same problem while transporting the overhead rates in quality and production.
    Can you give the elaborative steps of how you resolved your issue.
    The steps mention as under i tried but it is not working
    1) Go to SA38 or SE38
    2) Run the program RKAZUTR1
    3) You need to specify the number of your request with the costing sheet changes
    Thanks in advance
    Sayed

  • Rule Forwarded Messages are NOT in Sent folder

    I have several rules which filter & automatically forward messages elsewhere. The forward works most of the time BUT it does not appear in my Sent folder. Any insight or help would be appreciated...
    Robyn
    Message was edited by: derryhumma

    Thanks for that hint. Unfortunately I was not so lucky as you were. Also when trashing the .plist only the mac.com account remains in the account list after restart of Apple Mail. All other accounts need to be reinstalled
    Still Mail does not store the mails in the sent folder. Need to say:
    - the "non-storing" is random, not all sent mails are affected. Sometime it is OK, sometimes not
    - Not only the Mac account is affected, it can happen also on my office accounts.
    I am happy for further hints

Maybe you are looking for