Forwarding Rule drops attachments
I have a Mail Rule that forwards an incoming weekly report to a group of colleagues. The incoming Mail includes an attachment which always has the same basic name. With Snow Leopard and Mail 4 the rule works perfectly; with Lion and Mail 5.1 the Rule forwards the message but without the attachment. Has anyone else seen this problem? Can anyone suggest a solution?
Have not noticed but next time I do, I will check it out.
Similar Messages
-
IPhone 4s: forwarded emails drop attachments or will not send
For about four weeks I've had spotty occurrences where a forwarded message from an outlook account on my iPhone 4s will either drop the attachment or report that it is unable to send the message. This is now a constant behavior. I havent noticed any pattern with regard to the type of attachment (eg Word, PDF). This morning an 82k Word file caused the behavior. The most remarkable behavior occurred this weekend when 2 messages with attachments got in a loop and attempted to send (eg stayed in my Outbox) for three days. I was finally able to interrupt the loop, hit the edit button, and delete the outbound messages.
I'm on verizon running 5.0.1. Verizon told me to go to the apple store. The apple store told me to go to Verizon. Sweet.
I have not verified the behavior with other email accounts (hotmail, gmail).See this Discussion
https://discussions.apple.com/message/19521062 -
ASA 5510 running without issues for a while but we needed extra port so added a 4GE SSM.
Having installed the 4GE SSM we had some issues with the card not liking a connection to our switches and only working by plugging directly from the server into the firewall, not great as we wanted extra servers on the line in the future. So we upgraded the firmware and no are at an impasse.
We have upgraded to 8.0(4)3 and now we cannot get any traffic through the port, we can't even connect to an external DNS server. Running a packet trace I get an immediate error on the first step '(l2_acl) FP L2 rule drop', and it appears as though the outside connection is down.
I have some experience on setting up basic port forwarding and NAT for internet access, webservers, mail but this has thrown me. To be honest its a case of if it aint broke don't fix it so I need some expert help in resolving the problem.OK here goes, I have powered down the ASA and reseated the card but still no success. Here is the result of 'show interface'.
Result of the command: "show interface"
Interface Ethernet0/0 "external", is up, line protocol is up
Hardware is i82546GB rev03, BW 100 Mbps, DLY 100 usec
Auto-Duplex(Full-duplex), Auto-Speed(100 Mbps)
Input flow control is unsupported, output flow control is off
MAC address 0018.199e.7f58, MTU 1500
IP address 2XX.1XX.1XX.XXX, subnet mask 255.255.255.240
50599 packets input, 43869014 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 pause input, 0 resume input
0 L2 decode drops
40389 packets output, 11509330 bytes, 0 underruns
0 pause output, 0 resume output
0 output errors, 0 collisions, 1 interface resets
0 late collisions, 0 deferred
0 input reset drops, 0 output reset drops, 0 tx hangs
input queue (blocks free curr/low): hardware (255/244)
output queue (blocks free curr/low): hardware (255/235)
Traffic Statistics for "external":
50599 packets input, 42920030 bytes
40389 packets output, 10636033 bytes
656 packets dropped
1 minute input rate 78 pkts/sec, 78310 bytes/sec
1 minute output rate 59 pkts/sec, 8896 bytes/sec
1 minute drop rate, 0 pkts/sec
5 minute input rate 68 pkts/sec, 64069 bytes/sec
5 minute output rate 55 pkts/sec, 14343 bytes/sec
5 minute drop rate, 1 pkts/sec
Interface Ethernet0/1 "dmz1", is up, line protocol is up
Hardware is i82546GB rev03, BW 100 Mbps, DLY 100 usec
Auto-Duplex(Full-duplex), Auto-Speed(100 Mbps)
Input flow control is unsupported, output flow control is off
MAC address 0018.199e.7f59, MTU 1500
IP address 192.168.2.1, subnet mask 255.255.255.0
10626 packets input, 5136754 bytes, 0 no buffer
Received 85 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 pause input, 0 resume input
0 L2 decode drops
14826 packets output, 15929354 bytes, 0 underruns
0 pause output, 0 resume output
0 output errors, 0 collisions, 1 interface resets
0 late collisions, 0 deferred
14 input reset drops, 0 output reset drops, 0 tx hangs
input queue (blocks free curr/low): hardware (255/246)
output queue (blocks free curr/low): hardware (255/246)
Traffic Statistics for "dmz1":
10612 packets input, 4910710 bytes
14826 packets output, 15652088 bytes
63 packets dropped
1 minute input rate 1 pkts/sec, 516 bytes/sec
1 minute output rate 1 pkts/sec, 494 bytes/sec
1 minute drop rate, 0 pkts/sec
5 minute input rate 7 pkts/sec, 6167 bytes/sec
5 minute output rate 6 pkts/sec, 2384 bytes/sec
5 minute drop rate, 0 pkts/sec
Interface Ethernet0/2 "internal", is up, line protocol is up
Hardware is i82546GB rev03, BW 100 Mbps, DLY 100 usec
Auto-Duplex(Full-duplex), Auto-Speed(100 Mbps)
Input flow control is unsupported, output flow control is off
MAC address 0018.199e.7f5a, MTU 1500
IP address , subnet mask
59265 packets input, 23635653 bytes, 0 no buffer
Received 9823 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 pause input, 0 resume input
0 L2 decode drops
55517 packets output, 44176321 bytes, 0 underruns
0 pause output, 0 resume output
0 output errors, 0 collisions, 1 interface resets
0 late collisions, 0 deferred
167 input reset drops, 0 output reset drops, 0 tx hangs
input queue (blocks free curr/low): hardware (255/230)
output queue (blocks free curr/low): hardware (255/230)
Traffic Statistics for "internal":
59098 packets input, 22407185 bytes
55517 packets output, 43110583 bytes
3447 packets dropped
1 minute input rate 80 pkts/sec, 10312 bytes/sec
1 minute output rate 88 pkts/sec, 80758 bytes/sec
1 minute drop rate, 6 pkts/sec
5 minute input rate 65 pkts/sec, 11128 bytes/sec
5 minute output rate 64 pkts/sec, 62661 bytes/sec
5 minute drop rate, 4 pkts/sec
Interface Ethernet0/3 "cdmdmz", is up, line protocol is up
Hardware is i82546GB rev03, BW 100 Mbps, DLY 100 usec
Auto-Duplex(Full-duplex), Auto-Speed(100 Mbps)
Input flow control is unsupported, output flow control is off
MAC address 0018.199e.7f5b, MTU 1500
IP address 192.168.3.1, subnet mask 255.255.255.0
106 packets input, 18378 bytes, 0 no buffer
Received 57 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 pause input, 0 resume input
0 L2 decode drops
49 packets output, 17150 bytes, 0 underruns
0 pause output, 0 resume output
0 output errors, 0 collisions, 1 interface resets
0 late collisions, 0 deferred
11 input reset drops, 0 output reset drops, 0 tx hangs
input queue (blocks free curr/low): hardware (255/249)
output queue (blocks free curr/low): hardware (255/251)
Traffic Statistics for "cdmdmz":
95 packets input, 15728 bytes
49 packets output, 16178 bytes
42 packets dropped
1 minute input rate 0 pkts/sec, 23 bytes/sec
1 minute output rate 0 pkts/sec, 0 bytes/sec
1 minute drop rate, 0 pkts/sec
5 minute input rate 0 pkts/sec, 18 bytes/sec
5 minute output rate 0 pkts/sec, 0 bytes/sec
5 minute drop rate, 0 pkts/sec
Interface Management0/0 "management", is down, line protocol is down
Hardware is i82557, BW 100 Mbps, DLY 100 usec
Auto-Duplex, Auto-Speed
Input flow control is unsupported, output flow control is unsupported
MAC address 0018.199e.7f57, MTU 1500
IP address 192.168.1.1, subnet mask 255.255.255.0
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 pause input, 0 resume input
0 L2 decode drops
0 packets output, 0 bytes, 0 underruns
0 pause output, 0 resume output
0 output errors, 0 collisions, 0 interface resets
0 babbles, 0 late collisions, 0 deferred
0 lost carrier, 0 no carrier
0 input reset drops, 0 output reset drops
input queue (curr/max packets): hardware (0/0) software (0/0)
output queue (curr/max packets): hardware (0/0) software (0/0)
Traffic Statistics for "management":
0 packets input, 0 bytes
0 packets output, 0 bytes
0 packets dropped
1 minute input rate 0 pkts/sec, 0 bytes/sec
1 minute output rate 0 pkts/sec, 0 bytes/sec
1 minute drop rate, 0 pkts/sec
5 minute input rate 0 pkts/sec, 0 bytes/sec
5 minute output rate 0 pkts/sec, 0 bytes/sec
5 minute drop rate, 0 pkts/sec
Management-only interface. Blocked 0 through-the-device packets
Interface GigabitEthernet1/0 "dmz2", is up, line protocol is up
Hardware is VCS7380 rev01, BW 1000 Mbps, DLY 10 usec
Auto-Duplex(Full-duplex), Auto-Speed(100 Mbps)
Input flow control is unsupported, output flow control is off
Media-type configured as RJ45 connector
MAC address 0172.10a1.21db, MTU 1500
IP address 192.168.4.1, subnet mask 255.255.255.0
234 packets input, 21658 bytes, 0 no buffer
Received 59 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 pause input, 0 resume input
0 L2 decode drops
3 packets output, 192 bytes, 0 underruns
0 pause output, 0 resume output
0 output errors, 0 collisions, 0 interface resets
0 late collisions, 0 deferred
0 rate limit drops
0 input reset drops, 0 output reset drops
input queue (blocks free curr/low): hardware (0/0)
output queue (blocks free curr/low): hardware (0/0)
Traffic Statistics for "dmz2":
231 packets input, 17276 bytes
3 packets output, 84 bytes
229 packets dropped
1 minute input rate 0 pkts/sec, 5 bytes/sec
1 minute output rate 0 pkts/sec, 0 bytes/sec
1 minute drop rate, 0 pkts/sec
5 minute input rate 0 pkts/sec, 19 bytes/sec
5 minute output rate 0 pkts/sec, 0 bytes/sec
5 minute drop rate, 0 pkts/sec
Interface GigabitEthernet1/1 "dmz3", is down, line protocol is down
Hardware is VCS7380 rev01, BW 1000 Mbps, DLY 10 usec
Auto-Duplex, Auto-Speed
Input flow control is unsupported, output flow control is off
Media-type configured as RJ45 connector
MAC address 0172.10a1.21dc, MTU 1500
IP address 192.168.5.1, subnet mask 255.255.255.0
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 pause input, 0 resume input
0 L2 decode drops
0 packets output, 0 bytes, 0 underruns
0 pause output, 0 resume output
0 output errors, 0 collisions, 0 interface resets
0 late collisions, 0 deferred
0 rate limit drops
0 input reset drops, 0 output reset drops
input queue (blocks free curr/low): hardware (0/0)
output queue (blocks free curr/low): hardware (0/0)
Traffic Statistics for "dmz3":
0 packets input, 0 bytes
0 packets output, 0 bytes
0 packets dropped
1 minute input rate 0 pkts/sec, 0 bytes/sec
1 minute output rate 0 pkts/sec, 0 bytes/sec
1 minute drop rate, 0 pkts/sec
5 minute input rate 0 pkts/sec, 0 bytes/sec
5 minute output rate 0 pkts/sec, 0 bytes/sec
5 minute drop rate, 0 pkts/sec
Interface GigabitEthernet1/2 "", is administratively down, line protocol is down
Hardware is VCS7380 rev01, BW 1000 Mbps, DLY 10 usec
Auto-Duplex, Auto-Speed
Input flow control is unsupported, output flow control is off
Media-type configured as RJ45 connector
Available but not configured via nameif
MAC address 0172.10a1.21dd, MTU not set
IP address unassigned
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 pause input, 0 resume input
0 L2 decode drops
0 packets output, 0 bytes, 0 underruns
0 pause output, 0 resume output
0 output errors, 0 collisions, 0 interface resets
0 late collisions, 0 deferred
0 rate limit drops
0 input reset drops, 0 output reset drops
input queue (blocks free curr/low): hardware (0/0)
output queue (blocks free curr/low): hardware (0/0)
Interface GigabitEthernet1/3 "", is administratively down, line protocol is down
Hardware is VCS7380 rev01, BW 1000 Mbps, DLY 10 usec
Auto-Duplex, Auto-Speed
Input flow control is unsupported, output flow control is off
Media-type configured as RJ45 connector
Available but not configured via nameif
MAC address 0172.10a1.21de, MTU not set
IP address unassigned
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 pause input, 0 resume input
0 L2 decode drops
0 packets output, 0 bytes, 0 underruns
0 pause output, 0 resume output
0 output errors, 0 collisions, 0 interface resets
0 late collisions, 0 deferred
0 rate limit drops
0 input reset drops, 0 output reset drops
input queue (blocks free curr/low): hardware (0/0)
output queue (blocks free curr/low): hardware (0/0) -
How do I prevent Mac Mail from dropping attachments?
My OS X 10.7.3 Mail is dropping attachments. Any idea how to fix this? Every time I need to send an email with an attachment, I have to use webmail, and this is getting old fast. Thanks.
If Earthlink is unaffected it is probably a settimg in me.com. Log into me.com account in a browser such as Safari (will get icloud.com) and select the settings (gear) icon bottom left, and then click on the airplane icon. Make sure vacation setting is unchecked.
-
Two web servers cant use same port forwarding rule???
I have two web servers, each configured to respond to http reqests on port 80. I use NoIP service to map a domain name to my router. I create a port forwarding assignment for Server A by selecting the WebServer rule in the port forwarding rule table. All is fine. For Server B, I select the same Webserver rule and the router says there is a conflict.
I don't understand why. I think the router has enough information to route a http request for Server B by knowing its MAC address, which is different than Server A MAC address.
What am I missing here???
I was able to do this on my previous router with DD-WRT.....
So it would appear the way to resolve this is to assign a different port address to Server B???
grrrrrrrrrr I hate this routerYou shouldn't have been able to do that on any router. You have to change the listening port of server 2, to 8080 or something like that, or make one a secure server and run it over 443
That is a known issue with port forwarding
Problem #8:
Same Port in Multiple Rules
There are some routers such as Linksys, D-Link and many others that do not do any checks if a port is already in another port forwarding rule. A port can only be forwarded to one Computer/IP at a time. So when there are multiples of the same port number the port forwarding rule will not work.
Here is an example.
As you can see port 2350 is in 2 rules. The 1st one points to a different IP than that of the 2nd rule. So the router will honor the 1st rule and the 2nd port forwarding rule to port 2350 fails.
By removing the 1st rule the 2nd one will now work. -
Can't drag and drop attachments in mail. Major issue!
I have to restart the computer to drag and drop attachments to an email. If I want to do another drag and drop to another email I have to restart again to make it work. It is a real pain. Do any of you guys know if their is a file I can trash to make this work or I have to wait till apple has a update to fix this? Thanks.
When this happens can you drag and drop regular files and icons etc?
I did a clean install, setup several user accounts last night. Dragging and dropping was working in my main user account last night. This morning (computer on all night) I could not drag and drop anything in that particular user account including mail attachements. Other accounts worked fine. Thought it was a permissions issue but they were fine.
Ended up trashing the user account and resetting it up and everything back to normal. -
Outlook 2013 OOF "Forward" rules not working against Exchange 2007
We have found that on Outlook 2013 clients (connecting to Exchange 2007) we cannot set forwarding rules in OOF (Out of Office / Facilities) if we select a recipient from the GAL. The error we get when trying to set the rule is:
"Changes to the rule cannot be saved"
However, if we manually type the SMTP address (without resolving it to the GAL) and click OK the rule is accepted.
We have tested the rule using other versions of Outlook and it appears that Outlook 2013 is the only client that has this problem.
Any suggestions would be welcome.
MarkThe issue is know under OffBug 57619. A support case for this had been started in April but no customer pursued a fix yet.
Currently its status is low and no fix is intended. If this is a critical issue for you and to get it reconsidered, you'll need to open a support incident of your own, refer to OffBug 57619 and state your case as "high customer impact" (in case your not
a Premier customer) and request a Hotfix.
Robert Sparnaaij
[MVP-Outlook]
Outlook guides and more: HowTo-Outlook.com
Outlook Quick Tips: MSOutlook.info -
I receive e-mails with attachments, but when I forward them the attachments are reduced in size. What do I need to do to have them forwarded the same size as I received them?
If the attachments are photos, when you forward them, look on the bottom right of your compose window, change to "actual size". It's probably set to small as displayed here:
Regards,
Captfred -
Publish the port forwarding rules and req. for customers to use the FiOS TV features they pay for!
Please read this thread and vote.
http://forums.verizon.com/t5/Share-Your-Ideas-with-Verizon/Publish-the-port-forwarding-rules-and-req...Here they are, but - yes it would be great if Verizon published these, or at the very least linked to Actiontec's Website, where they publish the rules as well. or at least sticky some of these instructions here in the forums.
Instructional Video's and step by step detailed instructions for port forwarding
How to enable BASIC Port Forwarding on the MI424WR Verizon FiOS Router (actiontec.com)
How to Configure Advanced Port Forwarding on the MI424WR Verizon FiOS Router (actiontec.com)
PCWintech's guide to portforwarding for the actiontec MI424WR (Verizon Firmware)
PCWintech's guide to portforwarding for the Westell 327w DSL Modem
PortForward.com
I put my vote in.
EDIT: I Didn't realize you were asking for the port forwarding rules to the features, I should have read better. But yes I agree with that too. -
Help on setting up a forwarding rule for 2007 microsoft exchange server
can someone pls link or tell me how to set up a forwarding rule on a 2007 microsoft exchange server. I can only find stuff on a 2003 server and they are not quite the same.
Thxchk this MS KB : http://technet.microsoft.com/en-us/library/bb851509.aspx
Click on KUDOS to appreciate our efforts and mark the thread RESOLVED if your issue is resolved. -
Does anybody know what allows/restricts the feature to drag and drop attachments onto email ?
I used to use this all the time, then suddenly a few month ago, couldn't. i have tried myself to figure out why, without success.
I am using BT Yahoo Mail through IE11.0 on Windows 7. IE is set to 'auto-update' so something may have been reset, but i cant figure out what that might be.
Attachment though the paperclip icon works OK.
More mysteriously, my laptop uses the same setup but drag and drop still works OK on that !
Any ideas please ?
thanks
JohnWhat is your operating system?
What is your email client?
What is your Adobe Reader version? -
I had to do a factory reset on my MI424WR router while trying to get a security DVR accessable from the outside. I noticed that I have far fewer port forwarding rules now than before the reset. Does anyone have a list of rules I "should" have. Or maybe a config file I can load?
The issues now are that I lose connectivity with the net after the router runs for a couple hours. I also lose the ability to log into the router. Resetting the router clears it for a while, but then it dies again.The rules that should be in the router should be applied by Verizon or added by the router automatically as time goes on. For your case, just re-create your rules and see if anything breaks.
For the router deal, consider disabling services like UPnP, the IGMP gateway, and the Firewall so the router runs in simplest form. Alternatively, see if you can narrow down the disconnects down to a specific device or with bad Coax if you have a coax connection back to the ONT. Failing that, consider asking for a new router from Verizon.
========
The first to bring me 1Gbps Fiber for $30/m wins! -
RV180W loses port forwarding rules when switching WAN connections
We have a backup WAN connection in our office, but we switch this connection manually on our RV180W when the primary goes down. Our normal connection is ADSL with PPPoE, and the backup is Cable with DHCP.
However, we also have some port forwarding rules for our VoIP PBX (UDP port 5060) as well as SSH, and these rules seem to stop working completely when we switch our WAN connection to our cable connection. We can still surf the web from our workstations, but our incoming phone calls and SSH connections all cease to work completely. The problem does not persist after we've switched back to our normal ADSL connection.
This behaviour is completely bizarre and suggests that there's some kind of bug in the Cisco RV180W.helm,
I'm sorry, I wasn't clear which IP address renewal I am speaking about.
I believe that the problem is caused when the router renews the WHS's local IP address (192.168...). My WAN IP address remains unchanged througout the tests I performed and the problems I experienced.
The very act of changing the local clients' lease time in the router's configuration causes the forwarding to be lost immediately. (I am gusessing that when the lease time is changed, the router immediately renews the lease and begins a new countdown.)
(In fact, I might go as far as to say it is a bug in the firmware, but I haven't done enough testing to nail it down.) -
To get list of mailboxes who have forwarding rules setup
Hi ALL,
I have exchange 2010. is it possible to get list of users who have mail forwarding rules set to external email addresses(like gmail.com or yahoo.com)
TIAI started with your single user line and ended up with the following to get the rules for everyone including their name:
foreach ($usr in Get-ADUser -Filter ({enabled -eq $true -and mail -like "*"}) -Properties mail) { Get-InboxRule -Mailbox $usr.mail | select $usr.name, name, description | fl }
I put the output into a file which looks like:
<person's name>:
Name : Fowarding all emails
Description : If the message:
the message has an attachment
and the message is Meeting Request.
and my name is in the Cc box
and my name is in the To box
and my name is in the To or Cc box
and my name is not in the To box
and the message was sent only to me.
Take the following actions:
forward the message to '@ymail.com' -
Port Forwarding Rule Added Via UPnP
14:24:13, 27 May.
(2110048.260000) Port forwarding rule added via UPnP. protocol: UDP, external ports: any->57902, internal ports: 57902, internal client: 192.168.1.65
14:23:34, 27 May.
(2110008.940000) Port forwarding rule added via UPnP. protocol: UDP, external ports: any->57902, internal ports: 57902, internal client: 192.168.1.65
14:22:53, 27 May.
(2109967.800000) Port forwarding rule added via UPnP. protocol: UDP, external ports: any->57902, internal ports: 57902, internal client: 192.168.1.65
14:22:10, 27 May.
(2109925.160000) Port forwarding rule added via UPnP. protocol: UDP, external ports: any->57902, internal ports: 57902, internal client: 192.168.1.65
14:21:37, 27 May.
(2109892.130000) Port forwarding rule added via UPnP. protocol: UDP, external ports: any->57902, internal ports: 57902, internal client: 192.168.1.65
14:21:06, 27 May.
(2109861.170000) Port forwarding rule added via UPnP. protocol: UDP, external ports: any->57902, internal ports: 57902, internal client: 192.168.1.65
14:20:26, 27 May.
(2109820.740000) Port forwarding rule added via UPnP. protocol: UDP, external ports: any->57902, internal ports: 57902, internal client: 192.168.1.65
Hi guys, would anyone be able to tell me what the above messages in my HH3's log mean? My connection has been fine but I would like to know why this is happening every few seconds.
At first I thought it was because of a certain program I was using but it happens even when this program isn't running so I just don't know!! Any help is appreciated.
EDIT: So I'm guessing it's something to do with having UPnP turned on. The reason I'm asking is because I've seen other people's logs and they aren't filled with this message.Thanks, TommyBobbins.
I will turn off UPnP and see what happens.
I checked the logs again my computer has a lease of 192.168.1.64 - this IP address is also showing the same error in the logs. I suspect the other IP address, ending in 65 is my Dad's computer. He uses Windows and I use Mac.
I'll keep you posted.
EDIT: Just turned off UPnP and that was OK. I checked a program called uTorrent and it says the incoming TCP port (54488) is working.....I find this strange as I have portforwarding turned off... :s
Any ideas?
EDIT AGAIN:
Just wanted to add this in:
18:54:38, 27 May.
(2126273.250000) Port forwarding rule added via UPnP. protocol: UDP, external ports: any->52503, internal ports: 52503, internal client: 192.168.1.65
18:53:53, 27 May.
(2126228.130000) Port forwarding rule added via UPnP. protocol: UDP, external ports: any->52503, internal ports: 52503, internal client: 192.168.1.65
18:53:20, 27 May.
(2126194.690000) Port forwarding rule added via UPnP. protocol: UDP, external ports: any->52503, internal ports: 52503, internal client: 192.168.1.65
20:34:34, 27 May.
(2132268.320000) Port forwarding rule added via UPnP. protocol: UDP, external ports: any->54488, internal ports: 54488, internal client: 192.168.1.64
20:34:31, 27 May.
(2132266.240000) Port forwarding rule deleted via UPnP. protocol: UDP, external ports: any->54488, internal ports: 54488, internal client: 192.168.1.64
20:34:29, 27 May.
(2132264.190000) Port forwarding rule added via UPnP. protocol: TCP, external ports: any->54488, internal ports: 54488, internal client: 192.168.1.64
20:34:27, 27 May.
(2132262.050000) Port forwarding rule deleted via UPnP. protocol: TCP, external ports: any->54488, internal ports: 54488, internal client: 192.168.1.64
As you can see it happens on different ports and UDP and TCP ports....
Hasn't happened in the 20mins or so I've had UPnP turned off. Still, I am curious as to what causes this.
Maybe you are looking for
-
I own a MacBook Pro for 6 months now, and it always worked properly. Still, I'm concerned about the recent behaviour of its MagSafe connector. Its LED was usually always lit green when plugged on and the battery was charged, but since around 15 days,
-
Hi, I am having problem in generating excel output. I am using reports6i and i am generating output from web. While generating,i am getting the output in excel. But my problem is, in my excel output i am having a field called barcode which is a varch
-
Bridge to PS CC 2014: Error "Windows Cannot Find Photoshop CC" for PSD & TIFF files
Since installing PS CC 2014, I have been unable to open PSD & TIFF files from within Bridge. If I do- I get the error above. Once Photoshop CC 2014 was installed, I removed the older version of PS CC. Sounds like a registry issue created when PS
-
WF Configuration assistant Error (Table or view does not exist)
Hi I'm trying to configure a fresh owf_mgr schema on my new 11gr2 database using configuration assistant 2.6.4.0.0. The assistant connects but is not able to continue. The error is: java.sql.SQLException: ORA-00942: table or view does not exist. I do
-
HI all, How to data tranfer the XML file to internal table. Give a function module input details. Thanks, SReddy.