Fotos von Pages werden beim Umwandeln in PDF nicht richtig angezeigt.

Wenn ich ein Pages Dokument erstellt habe, mit Textfeldern und die Fotos aus iPhoto zuerst auf den Schreibtisch gezogen und hernach im Dokument eingefügt habe, werden sie beim Umwandeln in ein PDF nicht mehr richtig angezeigt.
Es kann sein das die Fotos auf der ersten Seite noch stimmen, aber auf der zweiten zum Beispiel das erste Foto für alle drei weiteren Fotos verwendet wird, entsprechend der Grösse natürlich auch verzerrt.
Wer kennt diese Problem auch und hat eine Lösung?

Die Fotos können nicht die selbe name haben. Die namen sollen verschieden von ein andern sein.

Similar Messages

  • Hintergrundfarben von INDESIGN werden beim exportieren in Acrobat X nicht angezeigt und nicht gedruckt, wohl aber im Acrobat reader

    Hintergrundfarben von INDESIGN werden beim exportieren in Acrobat X nicht angezeigt und nicht gedruckt, wohl aber im Acrobat Reader. Kann mir jemand sagen wo der Fehler liegt?

    Danke, das du dich meldest! Im Anhang 2 Screenshots.
    Exporteinstellungen waren aus AI oder ID einfach PDF-X3 oder -X4 oder einfach ”standard”, habe alles mögliche
    ausprobiert. Ich habe auch eine .ps -Datei geschrieben und auf den Distiller gezogen = gleiches Problem.
    Zu Ebenenpalette: hm, wüsste nicht, was da falsch eingestellt sein könnte...

  • Wie lösche ich Unsichtbare Benutzer ("Nur Freigaben" werden bei Benutzer und Gruppen nicht mehr angezeigt)

    Wie lösche ich Unsichtbare Benutzer ("Nur Freigaben" werden bei Benutzer und Gruppen nicht mehr angezeigt)

    hallo mylenium,
    zuerst mal danke für die tipps!
    "notes" habe ich keine angelegt. aber bin zur sicherheit trotzdem unter "site verwalten" auf "notes entfernen" gegangen.
    hat leider nicht gebracht.
    dass es an einem offenen tag etc. liegen könnte kann man (glaube ich) auch ausschliessen.
    1. ein "anderer" dreamweaver stellt die seite(n) korrekt dar.
    2. wenn ich die seiten auf den server setze, zeigt der browser die seiten korrekt dar
    3. "tidy" meldet auch keine fehler
    was mich irritiert....
    wenn ich bei voreinstellungen/unsichtbare elemente/server-side  includes/...deaktiviere und dann wieder aktiviere stimmt alles.
    wenn ich aber die dateien schliesse und wieder öffne, muss ich die  prozedur wiederholen.
    dachte, die einstellungen wären global?
    nochmal...alle anderen projekte werden in der entwurfsansicht korrekt dargestellt.
    gruss
    thomas

  • Fehler beim Starten - Anwendung konnte nicht richtig initialisiert werden

    Hallo - Wie ihr schon an den Topic erkennen könnt ist bei meinen bereits Registrierten Photoshop CS5 ein Fehler beim start.
    Es erscheind der Code: Die Anwendung konnte nicht richtig initalisiert werden (0xc000001d). Klicken Sie auf "OK", um die Anwendung zu beenden.
    Diese erscheind nachdem ich "OK" gedrückt habe nocheinmal.
    Ich mache jetzt noch ein paar Bilder von Cpu-Z
    <~~ Der Fehler
    <~~ Systeminformationen
    Hoffe ihr könnt mir bei meinem Problem behilflich sein,
    Mit freundlichen Gruß
    zer11

    Die Fehlermeldung deutet auf ein Windows-Problem hin.
    Hier ein Thread mit ähnlichem Hintergrund.
    http://forums.adobe.com/thread/630771?tstart=0
    Ein kurze Abstecher bei Google lieferte mir Hinweise darauf, dass das Problem bei bestimmten AMD-CPU's auftritt, wenn diese noch kein SSE2 unterstützen.
    Es kann aber auch etliche andere Ursachen haben.
    Ich empfehle mal das Event Log von Windows nach mehr Einzelheiten zu durchsuchen.
    Ansonsten hier mal die Links zu den Knowledge Bases von Adobe und Microsoft.
    http://www.adobe.com/cfusion/search/index.cfm?loc=en_us&term=0xc000001d&cat=support
    http://support.microsoft.com/search/default.aspx?mode=r&query=0xc000001d&spid=global&catal og=LCID%3D1031&1031comm=1&1031mt=1&ast=25&ast=28&ast=30&res=10

  • Fehlermeldung: Symbole werden nicht richtig angezeigt!

    Guten Tag, ich habe ein digitales Skript von einem Kommilitonen bekommen, welches ich mit der aktuellsten Version von Abobe Reader öffnete. Doch leider kam eine Fehlermeldung und einige Symbole werden nur als Punkte angezeigt... was kann ich/man dagegen tun????
    Hier 2 Screenshots:
    ggfs. könnte ich die .pdf-Datei jmd senden und er speichert es mir dann so ab, dass die symbole wieder angzeigt werden können.... sonst bringt mir das gute Skript nichts

    Use the following forum:
    http://forums.adobe.com/community/international_forums/deutsche

  • Bücher werden nach Neustart des Programms nicht mehr angezeigt

    Hallo.
    habe das Problem, dass das Programm nach Neustart keine Bücher mehr anzeigt, die Bücher beim Importierten auch nicht eingefügt werden können, da sie angeblich schon in der Bibliothek vorhanden sind. Habe schon alles probierte. Auch deinstallieren und neu aufspielen hat nichts gebracht. Wer weiß Rat?
    Danke für die Hilfe regiamtt

    Hello together,
    after intalling the update to OS X version 10.6.8 the dock is no longer displayed and the system is extremely slow. This only happened on my iMac but on my MacBook no problems occured. The differences between the two systems is that I use ParallelDesktop 6.0 on the iMac and it seems this cause the problem.
    Has anyone else the same problem and perhaps a solution?
    Timo

  • Lesezeichen beim Öffnen von PDF nicht anzeigen

    Ich suche dringend eine Möglichkeit, dass der Tab Lesezeichen beim Öffnen einer PDF nicht angezeigt wird. Wird erzeugen in unserem PDM Tresor PDF Zeichnungen für den Einkauf, mitunter mehrere Hundert am Tag, welche dann bestellt werden müssen. Wenn ein Mitarbeiter die Zeichnung öffnet wird immer die hälfte des Bildschirm vom Lesezeichen Tab eingenommen und muss dann wieder weggeklickt werden. Ich suche nach einer Möglichkeit, dass der Lesezeichen Tab erst garnicht als Standard angezeigt wird, wenn man eine PDF öffnet.

    Danke für die Antorten.
    @Mylenium: Wir haben eine Lizenz, aber ich rufe doch nicht nach der Erstellung aller Zeichnung diese dann einzeln noch einmal auf und speichere diese dann nochmal ab. Das würde nicht zu einer Arbeitszeit Ersparnis, sondern zum Gegenteil führen.
    @Bernd: Als Software ist unser CAD System Solidworks wohl zu nennen. Als Einstellungen für den Export kann ich aber nur folgendes auswählen:
    Gibt es als workaround vielleicht eine ältere Reader Version komplett ohne Lesezeichen. Diese werden zu 99,99% bei uns eh nicht gebraucht.

  • Ich besitze neu eine Leica D-Lux. LR zeigt nach der Überspielung der Fotos vom Chip folgendes an: "Die Dateien werden von der RAW-Unterstützung in LR nicht erkannt." !!  Warum? Was ist zu ändern? Früher hatte ich mit meiner Leica M9 diese Probleme nicht!

    Ich besitze neu eine Leica D-Lux.
    LR zeigt nach der Überspielung der Fotos vom Chip folgendes an:
    "Die Dateien werden von der RAW-Unterstützung in LR nicht erkannt." !!
    Warum? Was ist zu ändern?
    Früher hatte ich mit meiner Leica M9 diese Probleme nicht!
    Das RRAW Format wurde erkannt und ich konnte die Fotos bearbeiten!
    Gruß
    HGPohl
    [email protected]
    06196-42683

    What version of Lightroom are you using? Here is a list of cameras that are supported by Lightroom, and the version that is required for each camera. I apologize that everything is in English.
    Camera Raw plug-in | Supported cameras

  • Beim Erstellen eines PDF in WORD MAC 2008 über Drucken/als PDF speichern sehe ich Schriftart DIN Light/Medium (in Textfeld gesetzt) im Acrobat keine Buchstaben

    Beim Erstellen eines PDF in WORD MAC 2008 über Drucken/als PDF speichern sehe ich mit der Schriftart DIN Light/Medium (in Textfeld gesetzt) im Acrobat keine Buchstaben sondern erhalte ein weißes Blatt und eine Fehlermeldung: "Die eingebettete Schrift "ADMRRZ+DIN-Light" konnte nicht entnommen werden. Einige Zeichen werden u. U. nicht korrekt angezeigt bzw. gedruckt." Bei jedem Speichern stehen vor "DIN-Light" neue Hyroglyphen. Auch werden einige Symbole (eingefügte Pictogramme) nicht korrekt angezeigt. Wenn ich das PDF in Vorschau vom Mac öffne, ist (bis auf die Symbole) alles ok. Wenn ich ein PDF aus IND CS6 schreibe, funktioniert es mit der gleichen Schrift ohne Probleme. Das Problem besteht seit den beiden letzten Updates von Acrobat X.

  • Kann man mehrere Grafiken in einem Indesigndokument mit einem Klick von RGB nach CMYK umwandeln?

    Hallo zusammen,
    ich habe mehrere RGB Grafiken in einem Indesign Dokument (Indesign CS6) und möchte die gern alle von RGB nach CMYK umwandeln. Muß ich die alle einzeln in Photoshop öffnen und einzeln umwandeln oder gibt es einen Befehl, der diese alle direkt in PS öffnet und sie direkt alle in CMYK umwandelt? Oder geht es vielleicht sogar in Indesign selbst? Ich möchte dieses Dokument im Anschluss als PDF exportieren. Geht es vielleicht auch bei diesem Schritt?
    Herzlichen Dank für eine Hilfe.

    Some of the PDF presets, especially, PDF/X-1a, automatically convert RGB images to CMYK. Look at the Output panel when you choose PDF/X-1a.

  • Bei in InDesign erstellten Elementen mit "Scherwinkel" und dem Effekt "Abgeflachte Kante und Relief" wird beim Export als "Pdf mit Transparenzen" (Acrobat 1.6) der Effekt nicht dargestellt. Bei Pdf ohne Transparenz (Acrobat 1.3) funktioniert der Effekt.

    bei in InDesign erstellten Elementen mit "Scherwinkel" und dem Effekt "Abgeflachte Kante und Relief" wird beim Export als "Pdf mit Transparenzen" (Acrobat 1.6) der Effekt nicht dargestellt. Bei Pdf ohne Transparenz (Acrobat 1.3) funktioniert der Effekt. Gibt es eine Lösung, die das Problem behebt?Deutsche Foren

    Mit welchem Programm betrachtest Du die PDFs? Nur mit Acrobat können sie zuverlässig dargestellt werden.
    Die PDF-Versionen heißen PDF1.3 oder 1.6 und nicht Acrobat 1.3 oder 1.6, Acrobat ist das Programm, PDF das Dateiformat.
    NEIN, das ganze in Photoshop zu rastern ist keine taugliche Lösung, Du musst nur das richtige Betrachtungsprogramm wählen. Etwa Apple Vorschau ist untauglich, PDFs korrekt darzustellen.

  • How can I convert a pages color document to a PDF Black and White doc.

    How can I convert a pages color document to a PDF Black and White doc.  Or, covert the color to B&W in a new doc?

    > How can I convert a pages color document to a PDF Black and White doc.  Or, covert the color to B&W in a new doc?
    The general idea is that you colour correct photographs once, archive, and convert with or without colour changes. The archived photograph is unchanged - or we would be colour correcting the same photographs again and again and again.
    If you have a photograph with a corrected exposure, you can open the photograph in the Apple ColorSync Utility, apply a colour space conversion to a grayscale appearance using the preinstalled ICC profile, save the photograph under another name, and place that in your pagination.
    If you have a paginated document with corrected exposures, and any such non-scalable bitmap or scalable spline graphics as you have chosen to add, you can render the pagination as a whole to PDF through the same ICC profile, carrying out the same colour space conversion on any and all objects.
    Caveat: If you intend the pagination for certain processes, in particular offset lithography, then you are probably  expected not to render the type to grayscale, but rather to render it to single ink solid black. No software can determine what printing process you intend, you have to understand a bit about printing, and how to set up general colour space conversions in software. Ask your prepress provider, and if the answer is not prompt and proficient, pick another provider.
    /hh

  • How can I change the page size of a scanned PDF document?

    How can I change the page size of a scanned PDF document?
    I scanned a 50-page document with an HP 5610xi All-In-One using the software that comes with it: HP Scan Pro. Though the physical document has standard 8.5" x 11" pages, the PDF resulting from scanning has page size set to 35.42 × 48.67 inches (according to Preview's "Tools > Inspector". I want to resize the pages to 8.5" x 11". Shouldn't Preview be able to do that with "Tools > Adjust Size..."? When I try, the menu option is grey so I can't select it.
    I'm using Preview Version 4.2.

    Thanks for the insight; that explains why it's the wrong size. I selected 300dpi scanning (which is the default, actually), but HP Scan Pro evidently created a PDF with 72dpi indicated. I want it fixed because I want to distribute the file to other people and have them able to print or display it without problems.
    I still don't know why Preview won't let me change it, but your question about whether I wanted to print it did lead me to find a workaround: "File > Print" and "Save as PDF..." saved it with the correct page size.

  • How do you move pages around in a combined pdf online.

    how do you move pages around in a combined pdf online

    Hi,
    To move pages in combined PDF file you can use Adobe Acrobat.
    1. Open your combined PDF file in Acrobat XI
    2. Click "Tools" from top right corner
    3. Select "Pages" tab
    4. Select "Page Thumbnails"
    5. Move the page thumbnails at Page Thumbnail pane at left side of  document page.
    6. Save the PDF page.
    You can download Acrobat XI Pro Trial version from www.adobe.com or upgrade your service to Acrobat Plus (Please see more information at https://www.acrobat.com/acrobatplus/en/features.html?promoid=KIUAY
    Hisami

  • Hello there! i am using Adobe acrobat pro DC and using windows 8.1. Recently I was trying to convert a web page (includes greek letters) into pdf. I noticed that the conversion is not accurate, some words are missing, some are misplaced. Especially greek

    hello there! i am using Adobe acrobat pro DC and using windows 8.1. Recently I was trying to convert a web page (includes Greek letters) into PDF. I noticed that the conversion is not accurate, some words are missing, some are misplaced. Especially Greek words are not accurately converted or even not converted. Please give me some suggestions to improve this issue. Regards

    Hey quantum info,
    Thank you for posting at Adobe forums. We would love to help you out.
    Could you please let me know if you have tried converting other web pages to PDF and checked if the same issue persists.
    How have you been trying to convert the web page to PDF?
    Are you trying to convert to PDF directly via browsers or using "File > Create > PDF from Web Page"  option in Acrobat.
    Let me know more so that I can analyze where actually the issue persists.
    Hope to hear from you.
    Regards,
    Anubha

Maybe you are looking for

  • IDoc received with status 8

    Hi Experts, Please find the below Error now i am getting. No data available Diagnosis The data request was a full update. In this case, the corresponding table in the source system does not contain any data. System Response Info IDoc received with st

  • SAP BO CERTIFICATION ELIGIBILITY

    Hi Exports, 1)  What are the eligibilities(also Experience) for the SAP BO certification??? 2)  I Know the tools Universe designer, web intelligence Rich client, Web intelligence, Crystal reports, Xlscious      whitch level of certification, i eligib

  • Dynamic datasources and connnection pools cont...

    sorry.. i got an error when replying to the original message.. Thanks for the quick response. I'm assuming this applies to datasources as well. So, there's not much WL overhead with creating hundreds datasources and connection pools up front? Ken

  • IPad app Promo codes

    Hi, I want to promote a new app and send it to some bloggers/journalistS. But I don't have enough promo codes left... A friend suggested I should to join the "Enterprise Program" to distribute the app. But I believe this is only for internal use (ie.

  • Problem with Spreadsheet

    I am having trouble opening the spreadsheet showing my messaging details. I keep getting the same error over and over that it cannot open a .ACTION file