FrameMaker FDK Developement - hints and tips needed

Hi.
I have looked around after information about how to develope with FrameMaker FDK, but I can't find any good examples for a FDK newbee.
Anyone that knows about some useful links where I can find information about how to get started?
I have tried google, but I couldn't find anything good.
Thanks,
Per

If you need to create quick fixes to speed up production, then definitely investigate Framescript first. It's a complete IDE environment that lets you try things out iteratively. It has virtually all of the capabilities of the FDK and lets you access system resources as well. The documentation is extensive and there is a third-party tutorial book available from Rick Quatro at http://www.frameexpert.com
There is an active group on Yahoo for this as well at http://groups.yahoo.com/group/framescript-users/
Depending upon where you reside there also are some training classes available for this via Front-Runner Training in Toronto,
see: http://www.front-runner.com/TrainingCategoryDetail.php?cid=76&catid=4&compid=1&pageNum_Cat egoryCourses=00

Similar Messages

Hints and tips about OCP certification 10g

Hi,
in a few weeks I will have my certification test for OCP Oracle 10g.
For this I'm interested in hints and tips for the test. Did somebody completed this test (not the upgrade one) and could tell me please the main topic, some tips for best preparation and so on? Are the questions only "multiple choice" or are there also "fill-in" questions?
Thank you in advance
Dana

Hi Dana
It's all multiple choice. If you are going for OCP I assume you will be writing 10g DBA 2. The following link has exam details like passing score, points per chapter, etc.
http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=41&p_org_id=30&lang=US&p_exam_id=1Z0_043

IWeb Hints and Tips

How about hearing your Hints and Tips for iWeb?
Here's one to get the ball rolling.....
Most of my attempts at graphics have been done in Keynote due to the extra features that iWeb will hopefully inherit some day. (Apple please take note!)
The navigation buttons were made in iWeb and are a bit of a pain to do every time. Here's a tip on how to save them in a file for dropping into other web pages. I discovered this by accident when I was poking around the iDisk files to see what happened to my web pages after I hit the publish button.
Make up a page of your graphics and publish it. Then open up your local iDisk and go to Web/Sites/iWeb/Website/PageName_files and there you will find your graphics listed as shapeimage_1( 2 3 4....).png. Drag these out and drop them into your newly created Web Graphics folder. Drag and drop them onto iWeb pages as required.
http://web.mac.com/roddymckay/iWeb/PlanetRoddy/Roddy.html
This site changes with the wind - get to it quick before it disappears!
Due to an overload of graphics, music etc. it downloads at snail's pace - so much for "High Speed" internet.
iMac G5 Mac OS X (10.4.5) 1.5GB Ram

Funky, I liked it
I keep all my graphics in an iweb images folder as the original .key files. This way, if I ever want to make a change to just the stroke or fill or the included text without redoing the image, I can.
Here's an added tip for Keynoters. If you bring over grouped shapes, iWeb will not allow you to add a drop shadow to them. To enable this, copy the group, open Preview, do a command-N, then copy the image from there. It'll get pasted into iWeb as a PDF and you'll then be able to add a shadow.
http://www.makentosh.com

Safari 10.4.11 to Leopard 10.5 advice and tips needed

I'm new at all this so here I go...
After looking through the "discussions" it seems there's alot of problems to expect upgrading from Safari to Leopard and beyond.
What steps can I take to prevent or limit all those problems associated with the upgrade(s)??? what, where, how,
It appears that DU repairs and redownloading an update because of a corrupted file makes the biggest difference. What is the blue screen everyone talks about? can I prevent that first try upgrading?
So what if the installs goods error free...do I make the leap and update straight to 10.5.4?
Early 2006 model 20" Intel Core Duo iMac 2G Ram, 500G harddrive, x1600ATI.
Safari 10.4.11 or whatever the latest update is/was.
Upgrading to Leopard 10.5.1 or mb427a version i believe...

If you do things right you should not have problems. Those who do are simply not doing things right. Millions of users update without any problems or comment. A few hundred have problems and they all post about them here.
1. Repair your hard drive and permissions (use Disk Utility after booting from your OS X installer disc.)
2. Clone your startup volume to an external Firewire drive (use the Restore option of Disk Utility, Carbon Copy Cloner, or SuperDuper!)
3. Boot your computer with the clone from the external drive to be sure it works.
4. Update the clone on the external drive using Software Update or downloading the standalone updater(s) directly from Apple's Download Site.
5. Restart from the updated clone and use it for a while to be sure everything is normal.
6. Update the normal startup volume.
Key operations:
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger, and 4.1 for Leopard) and/or TechTool Pro (4.6.1 for Leopard) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
How to Clone Using Restore Option of Disk Utility
1. Open Disk Utility from the Utilities folder.
2. Select the backup or destination volume from the left side list.
3. Click on the Erase tab in the DU main window. Set the format type to Mac OS Extended (journaled, if available) and click on the Erase button. This step can be skipped if the destination has already been freshly erased.
4. Click on the Restore tab in the DU main window.
5. Select the backup or destination volume from the left side list and drag it to the Destination entry field.
6. Select the startup or source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
This may also be done using Carbon Copy Cloner or SuperDuper!.

Hints and tips for creating a wireless network with windows

G'day All,
I am trying to setup up a wireless network so I can share large files between my Macbook Pro and my housemates Windows XP machine.
I have no problem actually creating the network on my Macbook Pro and his windows machine can "see" it butI'm having trouble with my housemate's machine actually logging into my network (he can see it though).
I happy for him to dump the files (camera raw files) into my Drop box if it's the easiest solution.
Can anyone provide me with a basic step by step guide on what settings i need to fiddle with on both machines for it to work.
Thanks in advance.

Hi DAC73-
Anything useful here: Mac OS X: Setting up Windows File Sharing?
Luck-
-DaddyPaycheck

Hints and Tips ... sorry... Like IBM's

Dear Folks,
I know something (very few) about oracle Database.
I'm also interested on Linux.
A friend presented me the following webpage which seems to be quite good:
http://www-106.ibm.com/developerworks/offers/linux-speed-start/?S_TACT=103AMW01&S_CMP=sslx03tile#sek
In it I found a tutorial like:
http://www-106.ibm.com/developerworks/linux/library/l-ss3-db2/
Does OTN or any other Oracle webpage carry anything like this?
Is there any movement in order to provide such step-by-step tutorials?
Thanks!
Bernardo

Oracle by Example Series
http://otn.oracle.com/obe/paa/index.html
http://otn.oracle.com/tech/linux/content.html
http://otn.oracle.com/
HTH -Kevin

Hi, Just wondering if anyone has used the Jurassic Park game on an i-pod and experienced it freezing or being very slow on a regular basis? If so, does anyone have any hints or tips?

Does anyone have experience of using the Jurassic Park app game on their i-pod touch, and experiencing freezing and/or slow response? If so, could you share any hints or tips that you have found that resolves these issues? Many thanks.

I have not seen that posted here before
Try:
iOS: Troubleshooting applications purchased from the App Store
Contact the developer/go to their support site if only one app.
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod

Need advise on SQL,plsql developer career and future

Hi all,
I need all your advise in making an important decisions of my career path.I work in the IT field and have about total 4-5 years of work experience involving development and testing in a product based organization.
Presently-i have got chance since last 4-5 months to work with writing PLSQL code,SQL etc on a part basis. I am very much interested to continue my career path as a PLSQL developer.
But, unfortunately -in the total of my work experience-in the past 2-3 years-i worked with a internally developed DB query language(similar to SQL) and then from last few months with plsql. But this chance to work with PLSQL has been for less time and limited scope after which i will have to work on something different.
Ii want to fully take on my career in SQL,PLSQL as Database Developer.
Please advise me if my thinking seems logical and good and if I could do it. I have planned on applying for relevant SQL,PLSQL profile jobs.
Now, My serious worry and concern is I feel that since i have worked very less with PLSQL-so am low in confidence that I feel i wont be able to answer ,or tell or not knowledgeable enough to be able to clear the technical interviews for SQL,plsql development profile which would need at least some years of experience.
I have started studying and practsing PLSQL,sql by myself for from internet. So, can you all please advise me on how could i prepare myself for hard core technical interviews of SQL,PLSQL knowledge for about 2-3 years expertise.
I know its not much possible to be competent so much in the subject by just studying and practicing.Its easy as saying to study and get it by myself-but i want to try and will put my best for it.
Please help me with your inputs,all interview questions,hard ones-suggestions,links,any study materials, real time problems which i can try solving of SQL, PLSQL development.
Thanks All

Hi,
A very good starting point is (in my opinion): [Steven Feuerstein PL/SQL Obsession|http://www.toadworld.com/Knowledge/DatabaseKnowledge/StevenFeuersteinsPLSQLObsession/tabid/153/Default.aspx]. Also the official site [PL/SQL Technology Center|http://www.oracle.com/technology/tech/pl_sql/index.html]
Regards,

I bought macbook pro used one because i wanna start to develop ios apps and i need Mavericks if it is a possible my mac is 10.6 please help me apple

i bought macbook pro used one because i wanna start to develop ios apps and i need Mavericks if it is a possible my mac is 10.6 please help me apple
Model Name: MacBook Pro
Model Identifier: MacBookPro5,5
Processor Name: Intel Core 2 Duo
Processor Speed: 2.26 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 3 MB
Memory: 4 GB
Bus Speed: 1.07 GHz
Boot ROM Version: MBP55.00AC.B03
SMC Version (system): 1.47f2
Serial Number (system): W8******66D
Hardware UUID: *****
Sudden Motion Sensor:
State: Enabled
<Edited By Host>

Back up your data, check your applications for compatibility, and download Yosemite from the Mac App Store.
(121877)

HT4623 i have installed the beta version of 6.1 a month ago and now i cannot open my iphone 5 it needs regestration and when i try to register it says that it couldnt complete and i need to register in the developer what can i do now to reopen my device?

I have installed the beta version of 6.1 a month ago and now i cannot open my iphone 5 it needs regestration and when i try to register it says that it couldnt complete and i need to register in the developer what can i do now to reopen my device?

Probably wasn't a good idea to install beta software on a device when you're not a developer.
Apple clearly states that beta software is not to be installed on production devices.
Not really much you can do except wait for iOS 6.1 to be officially released and then install it.

Hi, I'm developing a application thats need read and log a large tag database at

Hi, I'm developing a application thats need read and log a large tag database at period of 1 second. My system have actually 1200 tags and when I try to increase the number of tags my system slowdown and not update at requested period anymore. I'm using NI OPC Servers to read data of 4 different PLC's. In the SVE I've created an IO Server to bind variables and all variables are located in a single process. All variables are logging alarms and data. The Log Deadband and Update Deadband are set to 0. My machine is a DELL Precision T5400 with Dual Intel Xeon Quad Core with 4GB of RAM and Windows XP Sp3 installed. Bruno Costa Automation Enginner

Duplicate Post
Why did you create an identical post under a different username?
You'll have to be patient. It is the 4th of July holiday, so the forums are going to be less active than a usual Monday.

Troubleshooting hints - differences between development environment and release environment

Hello,
I am using LabVIEW 8.6 for an application involving stepper motors. We are using 2 Velmex stepper motor systems to run PIR targets for a manufacturing test. The problem I am having is that the program runs fine in the states where it was developed but hangs approximately every 10th run when running in the manufacturing environment in China. Since I am on the EAst coast there is the 12 hour time delay, and I am planning on doing a live support call to find out what is going on. The person who installed the code made some modifications, but I am not aware of the differences. He also may send his code here and see how it runs.
The assumption I am making (based on past experiences from here in the States) is that the stepper motor interface is hanging. since I can't recreate the problem here I can't troubleshoot it.
With a past prooject I was working I did some code on one machine, and when I ran it on a different machine the order of execution for items in a sequence was different between the machines. Has anyone run into this before? Unfortunately for the task at hand the stepper motor has to run at the same time that analog data on multiple channels are being acquired.
Any suggestions?
Mike
Mike

Thanks for the reply. I did think about putting in a producer-consumer. It turns out that there was a problem with the computer it was being run on. The computer was changed and the problem got better, although it did not go away. The stepper motor was done through a com port talking to another hardware / software solution. The tasks are truly independent and pass no data between them. However, the other task being run involves collecting analog data and updating on a chart (and in one instance stimulating an analog output), and when the stepper motor starts the analog data collection is not updated on the chart. I figure this could be because the charts are a memory hog. No data is lost, and it is running, so I figure if it's not broke don't fix it. It now occasionally locks up. I can run it here for 100 times with zero lock ups, and the last report I got was it ran 30 times in china before locking up. I may have to start examining differences between their machine and my machine.
Now as to the configuration management. It needs to be clarified a wee bit. I'm doing the initial code development / updating, and then we hand off to china, which can make code tweaks as needed. They also have 3 lines running this program, and one of the items I did was to load the differences between lines from configiration files (INI files), and that I got working well. We have fixture variables, items that vary between lines, and configuration items, which are I/O lines and what not. The digital I/O and analog I/O referenced MAX tasks, and that worked well. There are also a com port call for the stepper motor, and in another program an RF power meter, which had to be referenced from an INI file. I will reccomend that they do their code development on one machine and create executables to store on the production lines. We have been bouncing code back and forth from the team members from the states that are currently in china doing the install.
Mike
Mike

I am new to this and a bit rusty with Java, Oracle, Web Development, et al; and, I need a free trial run at this time, Can we do this?

I am new to this and a bit rusty with Java, Oracle, Web Development, et al; and, I need a free trial run at this time, Can we do this?

your itunes accoutn have nothing to d with your computer
you can go to any computer with internet access in the world and
login into your itunes account if you have the appleID and password
the itunes account is placed on apples itunes servers

I want to use Xcode to create an app and i need developer tools. so i need to join the devoper program only problem is I'm not 18

i want to use Xcode to create an app and i need developer tools. so i need to join the devoper program only problem is I'm not 18

You can get Xcode without joining the developer program. Just go to the App Store and download it (it's free).
You'd only need to join the Developer program if you want to put your app into the App Store, this is for OS X.
You will need to join the Developer program if you want to develop for IOS. In that case you will need a parent or guardian.

I have applied to the iTunes affiliate program and received my affiliate token successfully. However, I want to use the web iMix, however I need a web developer identifier and secret phrase. I can't reach the web i mix affiliate program! Can anyone help??

I have applied to the iTunes affiliate program and received my affiliate token successfully. However, I want to use the web iMix, however I need a web developer identifier and secret phrase. I can't reach the web i mix affiliate program! Can anyone help??
You can find the full description here: http://www.apple.com/itunes/affiliates/resources/documentation/itunes-store-web- imix.html
I have sent an email for weeks now to the e-mail shown here http://www.apple.com/itunes/affiliates/resources/ and haven't had a single response from them. PLEASE HELP!!
Thank you!

Hey joshuafromisr,
If you resintall iTunes, it should fix the issue. The following document will go over how to remove iTunes fully and then reinstall. Depending on what version of Windows you're running you'll either follow the directions here:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
http://support.apple.com/kb/HT1925
or here:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
Best,
David

FrameMaker FDK Developement - hints and tips needed

Similar Messages

Maybe you are looking for