Free goods should not determine in sales order

Hi,
I have maintained the free goods determination in SAP CRM with validity period in T Code: /sapcnd/gcm and have created a quotation for the material which has a free goods validity.The free goods are determined at quotation level, when i was converting the quotation to the sales order the free goods validity period got expaired.In this case the free goods are should not get determined in the sales order.But when i test it in IDES system the free goods are getting determined in the sales order eventhough free goods validity period expaired.
Can any one tell me how to restict the free goods in the sales order level when the validity period expaired at the time of sales order create.
Regards
Nagaraju

Hi ,
You can use the BADI CRM_COPY_BADI. Here you can implement the check for products which are free and have expired to be excluded from copying from quotation to sales order.
Regards
Kavindra

Similar Messages

Partner determination functions are not determine in sales order

Dear Sap Gurus,
I have made a new partner function (P2) and have been configure it in partner determination procedure, although i hv made new customer master for the same account group. All th partner function are showing in the customer master data but these are not determine in sales order, one error is coming...this partner procedure is not defined.......kindly give me advide how to resolve this problem.
Regards
Parul Deshwal

Hi
Have you assigned the Partner determination procedure to your sales document type?
Also have you assigned the Partner function to your Partner determination procedure.
Also do the same to the sales order item partner determination
regards
Prashanth

Free goods Not determine in Sales order(VA01)

Hello Gurus,
As Iam Creating Sales Order(VA01). In the back end I have done each and every configuration regarding free good determination then also the system is not determine the free goods
Apart from that Iam going through Exclusive free goods.
So please give me the Solution where Iam missing.
Regards,
Sukdev.

Hello Gurus,
As Iam Creating Sales Order(VA01). In the back end I have done each and every configuration regarding free good determination then also the system is not determine the free goods
Apart from that Iam going through Exclusive free goods.
So please give me the Solution where Iam missing.
Regards,
Sukdev.

Free Goods Should not down MAP -

Hi, MM / FI Gurus!
We have a scenario where Vendor offers a Discount in Kind. For e.g. For Order Qty over 1000 Pcs vendor offers 10 Pcs free over each 100 Pcs. Assuming PO price as 10 units then for 1200 Ordered Qty vendor delivers 1200 + 120 = 1320
In PO the Free Goods are determined correctly (in either cases whether Inclusive / Exclusive). Order quantity in first line has a gross price determined. The second line tiem in PO has Free Goods Quantity determined as per procedure for Discount in Kind, with zero price.
When we do GR the Inventory is up by Order Quantity + Free Goods Quantity.
Automatic posting in MM determines the GL correctly.
Dr Inventory - Drugs and Meds: 128010 Amt 12000 Curr
Cr GR/IR Clearing:                               200060 Amt 12000- Curr
As expected MAP goes down due to Free Goods (Zero Price)
Client wants to up the inventory for by Order Qty + Free-Goods Qty but this should not down the MAP as well.
I have activated Direct Posting to G/L Accounts and Material Accounts for Incoming Invoice
Idea was to Credit Gross Price on the Free goods Quantity to Inventory - Drugs and Meds: 128010 to make up the MAP in material master and Debit the same amount to Other Income as follow:
Dr GR/IR Clearing: 200060 Amt 12000 Curr
Cr Vendor Account:                          200001 Amt 12000- Curr
Dr Inventory - Drugs and Meds: 128010 Amt 1200 Curr (Free Goods)
Cr COS-Drugs & Med:                         500100 Amt 1200- Curr (Free Goods)
However we cannot post Gross-price for Free goods Directly on the same GL(which has Automatic posting Checked) to Up the MAP (which falls down because of free goods having zero price).
Is there any way in FI to have both Automatic and Manual posting for the same GL?
Also I am not sure that after we do this if MAP will be Up.
Is there any other way may be by using Movement Type for such Movements?
Thanks
Atul Sonalkar

Hi Atul
Create PO only for the material for which you are going to pay your vendor.
ie., for 1000 units @ Rs. 12 = 12000. Post GR.
Now you are getting 100 units free. Don't enter this in your existing PO. Create a new PO for the free goods and post GR.
Your MAP related problem will be solved.
Regards
Rajesh
Do reward if this is useful.

Free goods are not determining access sequence like......

HI,
What could be the reason free goods determination is not happening with access sequence like sales orgPlantmateril. At the same time freee goods are determiing at customerMaterial level. I have generated new access sequnece like sales orgPlant+material and assinged and configured properly. Also maintained condtion record accordingly. Is there any programme error or need to apply any SAP note in this regard.
Do reply on this reasonbly.

Hi gridsleep from somewhere,
I presume you visit the US music Store. As far as I know that Music Store is the only one to offer free songs. The CC information is needed to verify you're in the US of A.
I for example can't buy from other Stores than the Dutch one.
The deal with the record companies/right holders don't allow cross-border sales. The same is true for free songs (I can't get them).
That's why they need the CC information.
Hope this helps.
M

Free goods condition records - Usage in Sales Order

HI,
I have so many condition records in various KOTN9xx tables, which are for issuing free goods. If I see a sales order item, that is a free good, how do I know, on what basis (based on which condition record, in which condition table) that free good was issued?
Technically speaking: Similar to KONV table for storing transaction data on pricing, is there a table for storing transaction data on free goods?
Thanks,
Juwin

Find the table number of the key combination of customer / material . & you can extract free goods condition records from this table.
Search in SE11 with the table number.

Condion Type "VPRS" should not appear in Sales Order, Inquiry, Contract

Hi Gurus,
Normally when you create Sales Order/Inquiry/Contract, in the Condition Tab VPRS Condition Type will appear and show the cost price of Materail from the Material Master.
My Client requirement is, VPRS Condition type has to be calculated as "Statistical" Contion but IT SHOULD NOT APPEAR IN THE CONDITIONS TAB IN THE SALES ORDER/INQUIRY/CONTRACT.
Thanks,
Bala

hello, friend.
try sapnote 105621. this is about restricting view of condition types (i.e. vprs) in sales orders by creating anauthorization object for cond types..
i wish to discuss our experience with this, as we had the same business requirement.
first, we simply deleted vprs from the PP. this did not affect financial accounting, until the client decided to implement std cost estimates. we had to bring back vprs.
now, we did the sapnote, which required joint efforts among SD, ABAP and BASIS. although we were able to restrict view of vprs in the cond tabs at itm level, this was still visible at header level. also, a resourceful data encoder can always find ways to view the same in, for example, the document flow or materials movement data.
however, try this and maybe you will get it right.
regards.

Item should not duplicate in sales order form in line tab ..

Hi All,
Not very sure this is the right forum for this if not please tell me the correct forum to post this.
We have a requirement(11.5.9) which we have to achieve it using custom.pll, as I am very much new to use it need help on this.
In Sales Order form once we enter in Lines Information TAB,
For example we will enter Item 'ABCD' at Line 1.1 then again at Line 2.1 if I try to enter the same item 'ABCD' it should pop up a message saying "Item Already Entered" once we press Tab on Ordered Item Field.
If we enter a different Item it should take as usual.
I will appreciate if some body posts the code for the same which we can do it using CUSTOM.pll
Thanks in Advance
Devender

If you are in the WHEN-VALIDATE-ITEM trigger, you cannot navigate back through the list of already entered records (especially if record you are in is not complete). It does delay the validation, but duplicate checks are typically done by querying the database on both WHEN-VALIDATE-ITEM and PRE-INSERT/PRE-UPDATE triggers. This means when entering a new Sales Order, you won't be warned that Line 2 has the same item as Line 1 until you save, but there are no navigation required to avoid issues such as trying to leave the current record before it is valid.

Condition type not determine in sales order

I have condition record maintained for the condition type as per the order reason. When I create the sales order system is not reading the condition record so no condition type is getting determined. Pricing date from the sales order is within the validity period of condition record.Parmeters are also matching but still in the sales order condition type is not getting determine.
Thanx
PNU

In that case, do update of pricing.
To do that, Sales Order - Item data - Condition Tab - Click Update button and choose option B - Carry out new pricing.
To know who manually remove this.
Choose Enviroment from menu bar in sales order - choose Change for display of change in the doc.
Regards
JP

Urgent:pricing condition not determined in sales order

HI,
i have defined a pricing condition for a material . when i am creating a sales order the pricing condition is not determined;

hi
You must have done all the pricing related settings like access sequence, determination, condition type. Please cross check them once again. Also see if the condition record is picked up properly , is it bypassing ?
If every thing is fine, check the item category of that material and see if in business data of that item category Pricing is activated !!
regards
swapnil

Free Good Should not be Modified

Dear All,
We are facing below issue.
While punching the order in VA01, depot (Plant) can change the qty of the free stock which has been mapped as TO stock, say e.g in Livon 50 ml there is TO of 8+1, while punching the order for 8 pcs & 1 pcs comes automatically, however depot has an option to change the 1 PC of free qty to 2 pcs or 100 pcs (just an exaggeration).
Ideally depot should not have an option to change or delete the free quantity. We need option/solution for this, as it is a potential area for fraud, as the depot can bill free quantity whenever he wants and for whatever value he wants.
Regards
Avinash.

i want to know is this user exit stop the deleting free line item from SO?
I am sorry to say, to some extent, you also need to put efforts to analyse this and if you are not able to find out, check with your technical team. SCN is only to show the direction in which you can travel
G. Lakshmipathi

Output type not determined in Sales Order

Hello Friends,
I am facing a problem.
I have maintained the O/P condition record for O/P type for order confirmation.
While creating sales order, in the determination analysis for O/P , it shows as O/P found, but the same is not added in the sales Order outputs.
Can somebody advise me what is missing ?
Regards

Harsh Mathur ,
1. You need to maintain Condition records in VV11 for BA00 (Key combination - order type)
2. If already created Check whether the records are existing through VV12
3. If yes, then enter into your sales order in VA02 Mode
4. Check Extras --> Output --> Header --> Edit
If status is yellow or green then it is ok. Output = BA00, Medium = Print output, Function = SP
Then Choose the line and click "Communication Method" Enter Logical destination - LP01 and activate the indicator against "Print Immediately"
Click Back button --> Click "Further Data"
Under "Requested Processing" header
Dispatch time = Choose the option accordingly
save it.
Then counter check the config by running sales transaction without saving check
Check Extras --> Output --> Header --> Print Preview
if the output is shown then you have succeded
Regards
Sathya

Customer not determine in sales order

Hi all,
While i'm creating sales order,i'm getting error like "no customer exit for sold to party 7000000" . Please sort out my problem as soon as possible. I have checked entire partner determination procedure. There all setting is fine.
Thanks & regards
keshav

Hi,
    while u r creating partner determination procedure there don't copy partner functions use standard functions like sp,bp.py sh.
    then in partner functions in procedure step use standard functions with ur partner procedure....
   then account group -functions assignment step also use standard functions....then ur problem is going to solve..
thanks
Mohan

Getting error in return order as free goods are not copying

Hi
We are facing error as free goods are not copying in return orders,We have done upto the billing and creating return order with the reference of billing
Many Thanks
Rakesh Naveen

Hi,
Kindly check the copying control at IMG->Sales and Distribution->Basic Functions->Free Goods->Maintain Copying Control.
Thank You,
RB

Stock Should not block in sasles Order,Sales Order stock should not Reserve

Stock should not reserve againest sales order, system should show the status confirm quantity or not,
How to Configure this for this scenario?

HI,
To map this scenario u hav to maintain the config settings for TOR and avaliability check for that document type and material and if u want to see the status confirm quantity or not use tcode MD04 or table VBBE is useful for u.
Regards,
kishore.
Edited by: kishore gopala on Feb 26, 2008 6:16 AM

Free goods should not determine in sales order

Similar Messages

Maybe you are looking for