Stock Should not block in sasles Order,Sales Order stock should not Reserve

Stock should not reserve againest sales order, system should show the status confirm quantity or not,
How to Configure this for this scenario?

HI,
To map this scenario u hav to maintain the config settings for TOR and avaliability check for that document type and material and if u want to see the status confirm quantity or not use tcode MD04 or table VBBE is useful for u.
Regards,
kishore.
Edited by: kishore gopala on Feb 26, 2008 6:16 AM

Similar Messages

  • System is not blocking Customer at creating Sales order - Urgent

    Hello all,
    Our user has created a sales order for 1,040,000.00  PKR for advance payment- cheque payment term. There is not payment against customer in fbl5n but system is not blocking sales order.Customer credit limit is zero. Any idea that why this is happening??

    hi,
    we had a similar req we handled it using delivery level blocks and restricted the authorisation to remove the block to certain users. incase you are not doin this follow this path. imglog executionshippingdeliveries-define reasons. assign this block to the order. also you will ahve to put teh block in cust master too.
    saurabh

  • Sytem should not allow to save the sales order based on risk category

    Hi,
    My user want to control the creation of sales orders based on risk category in credit control area.
    We created a new risk category - 30 Not authorized.
    And we made necessary configs also , like assignment of risk category and company code in OVFL.
    We assigned 30 risk category in FD32 for customers also.
    But while creation of sales order system is allowing to save the order.
    My user requirement system shoud not allow to save the sales orders for those are customers belongs to 30 risk category.
    How can we config. this
    thanks
    Sateesh

    hi,
    dont want to save the sales order if the credit limit exist ?
    then maintain block in OVA8
    choose
    your credit control area         risk categories             credit group
    1000                                        30 Not authorized           01
    checks tab
    choose static and maintain B
    this will give you error message and it will not allow you to save the sales order
    regards
    senya
    Edited by: senya_1111 on Oct 1, 2009 2:26 PM

  • Credit management how to block amount on particular sales order

    hi,
    Client want to block amount on sales order.
    If customer is having credit limit of 100000 n there are 3 sales order , sales order 1 amount is 50000,sales order 2 amount is 30000 and sales order 3 amount is 40000...
    Now customer is coming n saying I want 40000 amount material of sales order 1.here my client want to block 50000 for sales order 1 so customer can not use amount for other sales order , system will check credit limit is 100000 and out of 100000 system should block 50000 for order 1.
    Solution required...
    If this is not possible then suggest me possible solution.
    please suggest...

    please note what you require is not possible in SAP.
    Therefore there is no standard solution.

  • Billing block "Calculation missing" in sales order

    When I save sales order today, i find that billing block - 01 Calculation missing is trigger.  I have not found this block before.  What is the root cause of this?

    Hi,
    Someone has change the configuration to have the billing block automatically in your sales document type. You can check it in the transaction VOV8.
    Go in to your sales document type and see the field "Billing Block" under section "Billing". The value should be now "01". That's the reason why you get this billing block automatically in the sales order. If you don't want it to appear, please remove this entry to Blank and then try with a new sales order.
    Best regards,
    Anupa

  • Credit status and overall blocked status of a sales order

    Is there a sap delivered business object that has a method to get credit status and overall blocked status of a sales order?

    Hi,
    Thanks for the suggestion. I have been looking at BUS2032. It does not give me a method that has the values of credit status  and overall blocked status of a sales order. I now am kind of convinced that I will have to extend this object. Can anyone please tell me the steps that I will have to go through to do this. I would like to know if I should write a new function module that gets the required data from tables like VBAK and VBSTT. Should I then call the function module in a method.
    Or should I use the getStatus method that BUS2032 provides and get my values from there. A little more detail to this is greatly appreciated.
    Regards,
    Gayathri

  • Hi All, We are in to Release 11.5.10.2.There is a specific requirement to Prevent users from creating Manual Sales Orders in oracle and yet users should be able to book the Sales Orders Imported from CRM system into Orcale.Please advise.

    Hi All, We are in to Release 11.5.10.2.There is a specific requirement to Prevent users from creating Manual Sales Orders in Oracle and  yet users should be able to book the Sales Orders Imported from CRM system into Orcale.Please advise.

    Thanks for your advise.
    However, I missed to mention that we have two set of users  One is for Finished Goods and another for Spares.
    Only Spares users need to be prevented from creating Direct/Manual Sales Orders in Oracle.
    As you suggested, if this will be done at Form level, that may Disallow FG users also to create Manula Sales Orders which should not be the case.
    Further, I tried to test one scenario through Processing Constraints but it did not work.
    Application
    OM
    Validation Type
    Entity
    Temp
    Short Name
    TBL
    Validation Semantics
    Created By
    Equal To
    User(Myself)
    Processing Cosntraint
    Application
    OM
    Entity
    Order Header
    Constraint
    Operation
    User Action
    Create
    Not Allowed
    Conditions
    Group
    Scope
    Validation Entity
    Record Set
    Validation Template
    101
    Any
    Order Header
    Order
    Above Created
    Please advise.

  • How to block material issuing after sales order invoiced?

    As the subject mentioned,  could be a possible to block material issuing since sales order invoiced, or
    in the another words, after the sales order completed?
    Or could be a possible to set sales order as closed, and then material issuing related with this sales order are
    forbidden?
    Thanks in advanced,
    Zhou Zhen

    Dear Friend
    A sales order is created say order no 10000 and for material X say 10 units this order is delivered and PGIed and invoiced and the payment too has come
    That means the order 10000 is closed
    Case 1
    Now an user goes to VA02 t code and put this order no 10000 and changes the material X qty from 10 to 12 and opens up the whole order once again
    This can be controlled by using t code OVAH choosing message class the V4 message no 083 and change from warning to error
    Case2
    But to avoid the user to add material Y to the existing order say 10000 then i think we have to go for user exit
    Because the system doesnot even throw a warning message too in case 2 (according to my knowledge) and allows another line item to be added in the same order
    But you can test it if it throws any warning message we can try to convert that error
    But in case 2 it is not happening(even warning is not there)
    Regards
    Raja

  • MRP Type V1 does not consider Ext. req. Sales Order after MRP run

    Hi Buddies
    My client wants to use MRP Type V1 which should consider re-order point as well as external requirement (i.e. Sales Order) for net requirement calculation.However when i tried using V1 in material master and ran MD03 it only considered re-order point  and ignored Sales Order.Sales Order didnt even reflect in MD04.Moreover in OMDQ for V1 under additional ext req there is no Sales Order for selection.
    Please reply how i can have ext req sales order for MRP Type V1.
    Regards,
    Sachin Narvekar

    Hi
    MRP Type V1 creats the requirement when the need exceeds the Reorder Point, where as the MRP type VB creats the requirement when the stock qty goes below the reorder point.
    Regards

  • CO-PA document is not created while doing the sale order cycle

    Dear Experts,
    I have 4 company codes in my controlling area. I did all CO-PA configuration. But CO-PA Document is generated in Only one company code. Remaining company codes CO-PA document is not created while doing the sale order cycle
    I’ve carried a standard sales cycle that contains sales order (VA01),
    and (VF04,VF02). System should generate 4
    documents as follows
    1) FI Document
    2) CO Document
    3) Profit Center Accounting Document
    4) COPA Document
    But in my case for 3 company codes only 3 documents are generated instead of CO-PA. But for one company code 4 documents are generated.
    In my case i did all settings Operation concern level and assign to controlling area. I can,t Understood why system is generating CO-PA document for Only one company
    Please suggest me where i miss the settings..
    Regards,
    Krishna.V

    Dear Ajay,
    Cost element category is 01. Because hear is one another company they have FI only all transactions they maintain through FI only. so hear we maintain Cost elements category 01.
    I think it is not a problem. because hear i got CO-PA document from one company. Remaining 3 company is not generated.
    Hear we maintained all gl's chart of acc level and cost elements also.
    Please suggest me...
    Regards,
    Krishna. v

  • Copy Special Stock Partner Automatically from Ship-To in Sales Order

    Dear SD GUru,
    I have an issue here which needs help.
    In my partner determination, I have configured SB to be a copied Ship-To which is working now.
    So, each Ship-To has its own Special Stock Partner.
    In my consignment issue sales order, I do change the defaulted Ship-To to other Ship-To but the old "SB, Special Stock Partner" will still remain in the consignment issue order and will not change according to the new Ship-To automatically.
    Any way to make the system to refresh without manual intervention?
    Thanks,
    Soo

    Hi,
    If I am not wrong then below is the situation which you are facing:
    1. You have a sold-to-party which has multiple ship-to-parties, right or worng ?
    2. Every ship-to-party has it's own special stock partner , right or wrong ?
    Now, if first two points are right then, you might be getting a pop-up for selecting the special stock and ship-to-party partner function once you put the sold-to-party in your consignment-issue. Now, this is the point where you can select the ship-to-first and then system would automatically determine the special stock partner from the selected ship-to-party record.
    Let me know about this if my understanding and the solution is correct or not.
    Hrishi

  • Why we should assign Profitability Segment Number in sales Order

    Dear Gurus,
    Can any one tell me why we should assign profitability Segment Number in Sales Order?
    While i am createing the sales order system is asking to assign profitability Segment Number and WBS Element. Even though there is no specific assignment of these fields for incompletion log.
    Can anyone tell me what exactly is the functionality behind this Profitability Segment number?
    Good answers are rewarded with points
    Thanks and Regards
    SAP SD
    Yoganand

    Hi,
    If CO-PA is active settlement transfer the costs and revenue of the sales order item to profitability segment in CO-PA, if not active it gets transferred to G/L account in FI.
    Regarding functionality of Profitability segment - Need to specify Characteristics in CO-PA for profitability segments and these characteristics are used for Information system and planning. Charcteristics which are not involved in profitablity segment remains in the line item of CO-PA. In essence charcteristics decides on profitablity segments.
    Regarding removal of Profitablity segment no in Sales order .Kindly refer back to the earlier threads.
    Thanks & Regards
    Madhu

  • Product hierarchy  is not being maintained in the sales order material

    Hi,
    I have an issue where the product hier is not being maintained in the sales order for some of the materials although the material master has the prod hier maintained.. The main program is SAPMV45A and I have checked all the exits in MV45AFZZ. In none of these exits the PRODH field in XVBAP is being populated. I would like top know if anyone has faced a problem like this.
    cheers
    Aveek

    Hi,
    Thanks for your suggestion. The poduct hierarchy is maintained in the material master but not being picked up at the time of creating the sales order. I have found the solution and coding has to be done in the MV45AFZZ.
    cheers
    Aveek

  • Payment Guarantee Procedure not appearing automatically in the sales order

    Hi All,
    I have configured the risk management following all the steps as below but somehow the payment guarantee procedure does not auto appear in my sales order.
    Step 1: Financial Document Type
    Step 2: Field Controls in Fin Doc Type
    Step 3: Financial Document Control
    Step 4: Maintain Forms of Payment Guarantee
    Step 5: Define & Assign Payment Guarantee Procedure
    Step 6: Customer Payment Guarantee Procedure
    Step 7: Assign Doc Procedures to Order Types
    Step 8: Payment Guar.Procedure Determination
    Kindly advise if I have missed out any steps

    Hi,
    please check
    1 . Define Payment Guarantee Schema Determination
    2 . Activation of credit for item category
    With regards,
    Mrinal

  • The IC WebClient profile does not have a component 'ERP Sales Order'

    Hi CRM Experts,
    While creating the ERP Sales Order in web-IC
    we have bumped into following error:
    "The IC WebClient profile does not have a component 'ERP Sales Order'".
    And also we are not able to see sales area data and Plant data in the drop down lists.
    we have done the following settings:
    1) ERP Sales Order Profile:we have defined ERP Sales Order profile,maintained RFC destinatin and assigned document type to ERP Profile.
    2) Business Transaction Launcher: We have defined the Business Transaction Profile and assigned dependent business transaction.
    3) We have assigned the Business Transaction Profile to the Navigation Bar Profile.
    Please suggest me regarding above error also let us know did we miss any configuration?
    Waiting for your valuable inputs.
    Regards,
    Sree.

    Hi Sree,
    There is a setting needed for the IC webclient
    ERP_SALES_ORDER
    you need to define ERP sales order profile and assign it to your ic webclient profile.
    And the ERP sales order scenario can only be used with a ERP 6.0 backend system, at least.
    Hongyan

  • Discount pricing is not copied from Qoutation to Sales order.

    Hi All,
    Issue:
    Discount pricing is not copied from Qoutation to Sales order.
    Please suggest the correct copy control/Routine programs which i can check to proceed furthur.
    Points will be rewarded.
    Regards,
    neslin.

    kindly check in the price determination  whether you have assigned the quotation document pricing type ? simmilar like the sales order type you have assigned ?

Maybe you are looking for