Freeze Count and Freeze Level

From the description of Freeze level, I can begin to understand it's purpose and use. What I don't have is any data for any user. Has this been implemented in the latest hotfix? How does the data get populated? I believe this data
could be useful in our environment, but only if I have some.
Also, if anyone has begun using this data, how did you set it up and how are you using it?

On Wed, 11 Jan 2012 19:40:06 +0000, Frank Drewes wrote:
From what I've seen the 'Freeze Level' attribute is one of those convenience items and doesn't seem to be tied to a FIM feature.
Anyone know otherwise?
It has something to do with passwords and I know I've had this conversation
in the past, but I can't recall where that was. :-)
http://msdn.microsoft.com/en-us/library/ee380071(v=prot.10).aspx
Paul Adare
MVP - Forefront Identity Manager
http://www.identit.ca
RAM: A male sheep.

Similar Messages

Count at bin level and quant level?

what is the difference between cycle count at bin level and quant level?
Thx

If you use cycle counting inventory at quant level, the system does not set the inventory block for the entire storage bin. It sets the block instead for the quant to be inventoried.
You count only the selected materials, not all materials in the storage bin. If you manage storage bins with mixed storage, these storage bins are accessible for stock movements with other quants.
There can be open transfer orders for all materials that were not flagged for cycle counting in the inventory document. You can also create transfer orders for these materials during the inventory.
The system saves the inventory data at quant level.
In a stock movement, if you move a quant from one storage bin to another, the system deletes the quant in the source storage bin and creates a new quant in the destination storage bin.
Because the system stores the inventory data for the cycle counting inventory at quant level in the quant data, any inventory data that you previously entered is lost in this type of stock transfer.

COUNT() and SUM() function it not working in XDO file.

Hi ,
I am getting one error. Count and sum function not working proper.
For example :
Department 10 have 3 employee and total salary is 8750. But my report returning total employee 1 and total salary 5000
10
Ename Sal
KING 5000
CLARK 2450
MILLER 1300
==================
total employee : 1
total salary : 5000
Kindly help me solve this problem.
<dataTemplate name="TEXT">
<properties>
<property value="upper" name="xml_tag_case" />
</properties>
<lexicals>
</lexicals>
<dataQuery>
<sqlstatement name="Q_TEMP">
<![CDATA[SELECT DEPTNO,DNAME,LOC FROM DEPT]]>
</sqlstatement>
<sqlstatement name="Q_TEMP1">
<![CDATA[SELECT ENAME,HIREDATE,SAL FROM EMP WHERE DEPTNO = :DEPTNO]]>
</sqlstatement>
</dataQuery>
<datastructure>
<GROUP name="G_1" source="Q_TEMP">
<element value="DEPTNO" name="DEPTNO" />
<element value="DNAME" name="DNAME" />
<element value="LOC" name="LOC" />
<GROUP name="G_2" source="Q_TEMP1">
<element value="ENAME" name="ENAME" />
<element value="SAL" name="SAL" />
<element value="G_2.ENAME" name="TOTL_DETAILS" dataType="number" function="COUNT()" />
<element value="G_2.SAL" name="TOTL_SAL" function="SUM()"/>
</GROUP>
</GROUP>
</datastructure>
</dataTemplate>
Thanks
Yudhi

Please have the data structure as below:
<datastructure>
<GROUP name="G_1" source="Q_TEMP">
<element value="DEPTNO" name="DEPTNO" />
<element value="DNAME" name="DNAME" />
<element value="LOC" name="LOC" />
<GROUP name="G_2" source="Q_TEMP1">
<element value="ENAME" name="ENAME" />
<element value="SAL" name="SAL" />
*</GROUP>*
*<element value="G_2.ENAME" name="TOTL_DETAILS" dataType="number" function="COUNT()" />*
*<element value="G_2.SAL" name="TOTL_SAL" function="SUM()"/>*
*</GROUP>*
</datastructure>
Aggregate functions to be placed at the level you require it. Here you need at G_1, so place it there.

Retry count and retry Interval fields in Business service (Http protocol)

Is retry count and retry Interval in OSB business services(Http protocol) defined for retrying the application errors or for communication errors?
Also even if my connection timeout is 0 I get an error response due to communcation issue in abt 2.5 mins.
Please explain.

- There is an explicit configuration on business service called "Retry Application Errors", if enabled application errors will also be retried.
- If timeout is not set on business service then domain level timeout configuration comes into effect which is by default of 180 sec i.e 3 mins.
Hope this helps.

How to dynamically set Min count and Max Count values in Adobe Print Form?

How to set the Min Count and Max Count values dynamically in a Print Form?
The values when set should over ride the values set in Binding Tab.
This is all needed to print multiple Material Number labels on a single page - and the number of labels to be printed needs to be under user control - something like an Avery Address labels
Please advise.
Thanks,

Here is a work around that works for me and may not be an intelligent solution .
I kept the Min Count to 1 on the subform binding properties.
Per the number of labels required, I appended the same item to the internal table so many times and passed it to the label.
it works fine for my requirement.
However - leaving out the post for a while to see if this can be done at the form level via scripting.
Thanks,

Count and timestamp logging messages: disabled

Hi ,
what does this setting "Count and timestamp logging messages: disabled" mean ? in "show logging" output.
I do not see the number of message lines logged ( syslog ) increasing under the "show logging" output,
Same is the case with the numbers in "Trap logging: level notifications, xxxx message line logged"
This is happening on IOS , any idea why ?
Thanks,

Hello Vikram,
If you do not have the time-stamp configured it would be more difficult to troubleshoot, lets explain this with an example:
-One of your interfaces went down at 13:30 your local time, you have logging enabled without the time-stamp so you go to your syslog server and you look for that problem, in that case you will need to go to all the syslog messages database ( witch might be huge and the message you are looking for could be imposible to find) so if you have timestamp enable you will go directly to the 13:30 messages and find it so much easier.
Here is another explanation I found for you:
logging timestamp
This command causes the firewall to add a time stamp to each Syslog message before it is sent. The firewall should have its clock set and time synchronized to a known and accurate source.
Please rate helpful posts,
Kind regards,
Julio

Creating a Count at Header level..

Hi Experts,
What do you mean by creating a "count" at Header Level & Item Level?I have a Key Figure called PO Count(which counts the total number of Purchase orders),but my client says that this KF just counts the PO's at Item level and that they need a count at Header level.
Any help on this would be appreciated.
Thanks
Aravind Pattabiraman

Hi,
if ur still not able to do that
goto EEWB
Enter the Project Name
Right click on the Enhancement---->Select back to previous version.
Please Reward Points & Mark Helpful Answers
To mark Helpful Answers ;click radio Button next to the post.
RadioButtons
o Helpful Answer
o Very helpful Answer
o Problem Solved.
Click any of the above button next to the post; as per the anwers
To close the thread; Click Probelm solved Radio Button next to the post , which u feel is best possible answers

Block on IM-level when counting on WM-level

Hi,
Could you please let me know if there is any Process or transactio to block material on IM-level when counting on WM-level,
or Does it nessasary?
In Material Master, Plant/Storage location stock view, there is a field "physical inventory block". is not possible to maintain..as it is grayed out for us..so we cannot and we will not use MM02.
Regards
gova
Edited by: govardhan reddy on Mar 5, 2010 6:33 AM

When we are counting on WM-level the bin is blocked. In SAP no stock will be issued from that bin.
But on IM-level the stock is not blocked.
When an employee is counting an other employee can do on IM-level a goods issue. On IM-level the stock is
reduced. In WM total stock is reduced, because negative stock is created on a interim storage bin (this has to
be "repaired" manually).
But timing is becoming an issue now.
An example:                                                               stock   IM       WM
in stock:                                                                                5          5
count list is created
parts are counted                                                                 5          5
goods issue of 1 is done by an other employee                4          4 (5 in blocked bin, -1 in interim bin)
cycle count list is filled in (TC LI11N)                                          5
Stock in SAP =                                                                 5          5
Physical stock in bin                                                             4          4
counting result is 1
We want to block 12NC on IM-level for 2 reasons:
1.     negative stock on interim bin has to be "repaired" manually (interim stock has to cleared),
                        when a goods issue was done on IM level
2.     Cycle count differences (results) arise because IM-level was not blocked (not accaptable).
please provide me your valuble inputs.

How to improve the query performance in to report level and designer level

How to improve the query performance in to report level and designer level......?
Plz let me know the detail view......

first its all based on the design of the database, universe and the report.
at the universe Level, you have to check your Contexts very well to get the optimal performance of the universe and also your joins, keep your joins with key fields, will give you the best performance.
at the report level, try to make the reports dynamic as much as you can, (Parameters) and so on.
and when you create a paremeter try to get it match with the key fields in the database.
good luck
Amr

Function modules to get wbs level budgets and activity level cost

hai gurus can any one tell me the function modules or any other bapis to get the wbs level budgets and activity level costs
thanx in advance
afzal

ok

Question about CHKDSK ,S.M.A.R.T and low level format

hi,
I like to know the difference exactly between CHKDSK and S.M.A.R.T and low level format program(I know that low level format writes zero"s) I mean besides the low level format writes zero's what onother
benefits it has , it repairs some bad sectors or mark bad sectors ect?
very short explanation wil be enough.
thanks
johan
h.david

H.david
1-CHKDSK http://en.wikipedia.org/wiki/CHKDSK CHKDSK verifies the
file system integrity on
hard disks or
floppy disk and fixes logical file system errors.
2-S.M.A.R.T http://en.wikipedia.org/wiki/S.M.A.R.T. smart is a monitoring system for
computer
hard disk drives (HDDs) and
solid-state drives (SSDs)[1] to detect and report on various indicators of reliability, in the hope of anticipating failures.
3-Low level formatting http://en.wikipedia.org/wiki/Low_level_format
Wanikiya and Dyami--Team Zigzag

Dunning Old dinning level and dunning level

Hi experts,
I have one issue in dunning. the issue is where the dunning history for particular customer shows as old dunning level as 3 and dunning level as 2.
i have checked the customer master there is change in the dunning procdure. But the document and master data shows the correct dunning level with the new procdure.
so i didnt understand what is the OLD dunning level and dunning level for the same cusomer. the issue is only with one customer.
I have also checked with old procdure with same customer in table MHNK. there are some notices done. but how come the current invoice shows the old dunning level for the same invoice.
can any once explain me how to proceed.
Regards
Ashok

Hi
Thnks for the reply so we need to apply this note for making the old dunning level and dunning level makes equal after you run the program.
Also one more doubt, since i have observed that the dunning after the parameters entered. looks like this
Parameters were maintained
Dunning selection executed, job deleted
Dunning notice printed, job deleted.
the above doesnt means that they will update the old dunning level right.
Regards
Ashok

Through Programaticaly How To change Dunning Procedure and Dunning level

I am having the requirement to change the dunning procedure and dunning level programatically.
Is there any Function module or BAPI or sample code where I can change the dunning procedure and push the dunning level to
30(No matter at what level but it has to push to 30).

Try these function modules available through T.code FQEVENTS
FKK_SAMPLE_0351 or FKK_SAMPLE_0307 or FKK_SAMPLE_0744 or FKK_SAMPLE_0304
Or try creating one procedure to exclusively handle a particular level /dunning activity only and replace the procedure in the master data
Hope it offers some help

Difference between sales order schedule line and item level data

Hi All,
Could you please let me know what is the difference between sales order schedule line and item level data?
Thanks,
Ramya

Hi Ramya,
Sales order schedule line contains del date, order qty, rounded qty, confirmed qty, delivery qty, schedule line category, purchase requisition etc., ie It contains the full details of sales order data with respect to the scheduled line of delivery. The total quantity of a sales order item can be subdivided into schedule lines that contain the various subsets with the corresponding delivering dates.
Sales order Item level data contains details of the item in the sales order like material code, net price, net value, UoM, PO details, reason for rejection if any, material group,billing date, plant etc., ie this
contains the full details of item irrespective of scheduled line.
Regards,
R. Senthil Mareeswaran.

How do I use the counter and digital signals of the 6071E while it is connected to SCXI modules?

I am contemplating using a PCI 6071E with SCXI. We have the boards (6071E), we would need the cable (I suppose SH1006868) and the SCXI system. I would like to know how would you access the counter and digital line capabilities of the board. I will be using a SCXI-1314 with a SCXI-1520 Module for strain measurements but will need to use the counter and digital lines of the board as well. Can this be done? If so, how and/or what else do I need?

I think this KnowledgeBase will answer the question for you.
Accessing DAQ Board Counter Pins with an SCXI System
Otis
Training and Certification
Product Support Engineer
National Instruments

Freeze Count and Freeze Level

Similar Messages

Maybe you are looking for