Freight after ED and before VAT, Discount after ED and before VAT
Hi,
We have below two scenario and we want to map this.
1) Discount after ED and Before VAT
2) Freight After ED and Before VAT.
first requirement will be fullfilled by assigning subtotal '6' to discount condition in M/08 and 362 routine to BASB and 363 routine to VAT condition in OBQ3
Second requirement will be fullfilled by assigning subtotal '6' to Frieght condition in M/08 and assigning 363 routine to VAT condition in OBQ3 and removing 362 routine against of BASB.
We want to map it both pl. guide us how to map BASB value in TAXINN.
Regards,
Rajesh
Hi Ajit,
Appreciate your answer.
Taking you answer into consideration i have below excersice.
Subtotal '6' to Freight and Discount conditions
362 routine to BASB conditon type in OBQ3
363 routine to VAT condition in OBQ3
it will work perfect in case of Discount after ED before VAT. but in case of Freight after ED bfroe VAT its not working.
Since 362 routine, will do minus '6' subtotal value and plus '4' vlaue.
If we add freight component to condition then system will reduce amount from BASB. that is practicly we dont wan't.
expected your comment.
Regards,
Rajesh
Similar Messages
-
Calculation and posting of discount on Payment and on net amount
Hello,
My client would like to configure posting of discount on payment. The discount should be calculated on the net amount and should also adjust the VAT input tax amount. Example:
PO: 100 EUR, VAT 10 EUR, Gross amt = 110 EUR, Invoice recieved: 110 (-110 on vendor,100 is posted on GR/IR and 10 on input tax). When payment is done, discount amounts to 2.2 EUR ( 110 is posted on vendor account, -107.8 on bank account, -2 on discount account, -0.2 in input tax).
Have anyone of you ever did this on SAP. Can you pleas explain me the steps if yes? Thank you for your help.Hi,
I have already did a test with base discount on net amount and base vat on net amount check. When those are check, during good receipt the purchase account is debit with the net amount (gross -discount) and during invoice the difference is then transferred to the purchase account. The tax is calculated on the net amount. This is not what we are looking for. For us we want to know if it is possible that during good receipt and invoice received everything is calculated without taking into consideration the discount received. It is only when we are doing the payment of the invoice that discount is calculated and the VAT amount is adjusted for with the discount received. Thank you for your help. -
I was charged for Premium and also student discount. And also $1.09 was charged on my card 3 times
I was charged for Premium and also student discount twice. And also $1.09 was charged on my card 3 times. I do not understand any of this! Please help me? Basically I was charged $25.15 ?
Hey there and welcome to the community!
I suggest you use this online contact form. When you get an automatic email sending you to the community, make sure that you reply back to that so you get in touch with one of the staff. You should hear from them in 24-48 hours.
I hope this helped and if you need anything else, just let me know! -
Discount after Excise And Before VAT
Dear All,
We have the below requirement, Vendor is giving the discount After Taxes & before calculating the VAT. How to meet this requirement ?
Right now i have created a condn type & added in tax procedure, But not able to meet the requirement.
We are using TAXINN tax procedure.
Ex : Base Price is Rs 100
BED Rs 8
ECess Rs 1.60
SECess Rs 0.80
Total Inc Taxes is 110.40
Then we need discount Say Rs 2/Ltr
Value After Disc is Rs 108.40
VAT(12.5%) Rs 13.55
Actual PO Value Rs 121.95
B/regds,
CBHi,
I think you can make a condition type and add this condition type in your pricing procedure below the step of Excise duties. After this condition step, then put the Sales tax conditions to calculate on this step.
Ex: 10 Base Price
20 Excise Duty
30 Cess
40 ECess
50 Total Amount Incl of Duties
60 Discount on this Total Amt Incl Duties
70 Total Amount Incl of Duties and Disc (Step 50 to 60)
70 Sales Tax ( from Step 70 )
Hope this clears u r doubt.
Regards
Anand. -
Hi , Friends,
My client has a scenario where in some purchase orders , he receives the discount after tax.
when I add the discount (absolute) after tax in the m/08 , the net price changes and the tax is calculated on this new net price which is wrong & not required .
Friends tell me what chnages I need to do so that discount is calculated after Tax & VAt and the ideally what should be the accounting entries in MIGO and MIRO.
if the gross price is Rs 100
tax is Rs 10
and discount is Rs 5.
Thanks in advanceHi Dgn,
What type of industry sector your client belongs to. But as a standard practise, cash discounts are captured before adopting the Tax or VAT through Invoice.
We will calculate the accounts payable:
Usually below is the scenario for taking the discounts from the vendor in the process of purchaing:
will take your given figures/values:
Eg. (1)
Total gross price: 100.00 INR (as per your client)
Discount: 5.00 INR (-ve)
95.00 INR
then adopt, Tax (10%): 9.50 INR (10% on gross ( = 9.50 INR) : goes to govt. for tax depart.
that means, the total amount: 85.50 INR payable to the vendor (A/P)
But, where as in your case /as per client,
(2)
Taking your eg. Total gross price: 100.00 INR (as per your client)
Tax amount: (10%) 10.00 INR (10% on gross = 10 INR) : goes to govt. for tax depart.
110.00 INR
then taking, Discount: 5.00 INR (-ve)
that means, the total amount: 105.00 INR payable to the vendor (A/P)
(1): 85.5 INR < (2) : 105.00 INR
So, in 2nd scenario, your client has to pay more to their vendors & also more tax in the process of purchasing compare to the usually procedure (1). Other wise your client has to pay extra 20.00 INR. Hence option 1 is the rightone.
Pls check with your client again and suggest them further.
Hope you understood.
Regards,
Sapsrin. -
Can i use my Corp discount to buy a phone and pay the balance after discount thru Edge?
Can i use my Corp discount to buy a phone and pay the balance after discount thru Edge?
Are Corporate discounts usable against the full purchase price of the phone?
How does Corporate discount work on More Everything Edge.Ok so another question are you going to pay full price up front for the phone, use Edge or do it on a subsidy? Also which model since they vary in price from $650-$950.
Line fees on a More Everything plan are typically $40 per line.As I said being on Edge or being off contract would reduce that by $25 if you have a 10 GB data plan as you state you would. The 10 GB data portion is $100 but since your discount is 26% it will only cost $74.
So to keep this simple until I get more info from you if you still had all 3 lines under contract, 3 smartphone lines and 10 GB with a 26% discount would be $194 a month before taxes and fees.
Since you have 2 lines currently of contract, if you kept using your current phones or paid full price upfront for new phones you'd have 2 month2month discounts of $25 so that would drop your bill to $144 before taxes/fees
If you bought the cheapest iPhone 6 on Edge your Edge payment would be $32.50 a month for 20 months. So for two iPhones 6es( assuming you got the cheapest one ) that would be $65. That would on top of the $144. So a total of $209 -
How to incorporate discount after excise but before CST
Hi
How to incorporate discount after excise but before CST in pricing structure both in OBQ3 and normal pric structure?
Thanks in advance
Regards
venkatHi
friends
I am sorry I thought that this has been solved after I made some changes, but this issue is remained as unsolved.Please help me by giving solution.Most urgent.
Tegards
venkat -
my ipod touch is stuck on the apple logo and after a while a white screen comes up and it restarts and the same thing all over agan. this happened to me before and after a while it turns on but why does it keep on doing this?
Try connecting the iPod Touch to your computer and restore it. http://support.apple.com/kb/HT1414
-
I had a MobileMe account before... after upgrading to iOS 5, should I keep my account info under iCloud (settings) AND under mail, contacts and calendars (in Settings as well) or only keep the info under the new iCloud setting section?
That's not the correct port. It should be 993 for incoming.
If you signed into iCloud from the System Preferences, it should automatically create the iCloud account for you in Mail. Sounds like it is an account you already had set up for MMe in Mail.
Open Mail preferences, open the Accounts tab, disable that account in the advanced pane.
Open Sys Prefs, open the iCloud tab, and sign out of iCloud. Then sign back in and see if a new iCloud account is automatically created. -
Every time I try to purchase a song from itunes, it says I have to put in security questions and answer them, which it's never done before. Then after I do the questions, it says that an error occurred and my changes couldn't be saved. It has been doing this for weeks, and I can't purchase anything! HELP!
Hi mterry1723, one solution that might be worth trying is this:
- Close iTunes, if it's open
- Open Safari and got to 'Preferences'
- Select 'Security' on the top
- Untick all the security options in the menu
- Click the 'Show Cookies' button and look for all the 'apple' entries in the left-hand column.
- Highlight them (select them collectively) and press 'Remove'
- Now open iTunes and buy the song as usual.
- You may be asked to do the same security process as before, so do as asked.
- Hopefully, the security check will now have accepted your answers and start downloading the song as normal.
Remember to re-tick all the required security options you had just un-ticked in Safari preferences. You don't need to bother about opening the cookies again.
I hope this has worked for you and my profoundest apologies if it has not. Worth a go, though!
I did see this thread: https://discussions.apple.com/message/18259935#18259935 which may be of more help, mainly the last entry by 'c2boyd'
Message was edited by: Bongomal -
When I leave my iphone in my room and went out. After I came back, I find several apps which was not opened before had been opened. It here are also 8-10 photos of my ceiling being taken, includes video. Also my home page picture has been changed.
also my sister said she heard music being played fr my phone suddently. Is my iphone being hacked?
-
when i do title animation the last letters or words of the script always pop up before the rest fades in and stays after the rest fades out...help!
I tried changing the font and then the placement of the title but it always comes back!Thank you. I figured it out right before I heard from you. Running the OCR before the redaction made it work correctly.
Thank you so much for taking the time to answer my question.
Make it a great day.
BG10 -
iMovie was removed from my macbook pro after I downloaded OS X Yosemite, I had it before and have used it, but now I can only get it through the app store. I can't pay for it so I would really appreciate the help.
Look in your applications folder for the installer - Install OS X Yosemite. Delete it. Then go back to the App Store purchases tab and see if you can download it. You might have to re-index Spotlight.
Spotlight – Re-index -
About the first inspection before mass production ,and the end inspection after mass production
Hi ,experts :
There is a scenario about my customer : before mass production they need to do first inspection avoid a lot of defect for the finish goods ; and he also need doing the end inspection to check whether the mold can be used for next batch or need to do some repair .
I want to add two operations in the routing ,but it seems unreasonable .
Can anyone give me some advice for it ? thanks advance .Hi Avril Liu,
OPTION - A
I think, you can try the below option which may not be the best solution but looks logical to me -
a) Create to inspection types 8901 (Initial Mold Manual Inspection) and 8902 (Final Mold Manual Inspection) and assign them to inspection lot origin 89. Please note these inspection types are manually created and these are not linked to stock movement.
b) Use the inspection type 8901 to test the initial condition of the process. In case if the UD = R, then use enhancement to create a new 8901 inspection lot by linking the old number in "TEXT" field.
c) If the next inspection UD = R, then repeat the manual inspection lot 8901 inspection lot creation step. If the inspection lot 8901 UD = A, then this process is Good to start he process. So create a follow-up action and send emails to stakeholders.
d) If you are not interested in testing the in-process quality of the produced materials, then you need not need 04 inspection type to be added for GR inspection. If you do test (I think yes, based on your answer...) you can add this inspection type to your material. Then you will be able to Release/Block your produced materials too using UD= A/R respectively.
e) Once the production process is complete, you can create manual inspection 8902 to test the mold characteristic. If the UD = R, then again execute the enhancement to create a new inspection lot 8902, by adding the previous inspection lot number in TEXT field, and keep repeating this process. If the UD = A, then there is no further need for testing, and follow-up mail can be send to the stakeholders for the completion of the process.
OPTION - B
Else, you may need to use inspection type 14 linked to your equipment doing the production, to test the mold characteristics. This process will be linked to PM-QM module, and you need to map this process too.
1st inspection can be linked to 89 manual inspection to double check the process and the final inspection after entire production can be done through inspection type 14. Checking the produced material quality will again need inspection type 04 activation like normal process.
Thanks,
Arijit -
I updated my ipad mini to ios7 and after that the restrictions have been turned on automatically. It was off before the update and I din do after either. I tried 1234 but it doesn't work. Please help me.
1. It is never a good idea to include personal info like your email address or Apple ID in a post on an open forum.
2. The email you received DOES NOT say your Apple ID cannot be used to unlock this iPad. The email informs you that your Apple ID was used to unlock an iPad. Fortunately the iPad is yours. The message confirms that. If your Apple ID was used to unlock an iPad that was not yours your would then know to change your password. Since the iPad is yours you do not need to change your password.
Is your iPad working?
Maybe you are looking for
-
8.1.2. crashes every time I try to open a pdf
Since upgrading to 8.1.2 automatically, I try to open a fax sent by my internet fax service, and it crashes every time. Error: instruction at 0x2d830cbc ...memory cannot be read. I thought it might be something to do with that particular fax, so I tr
-
Posting Cost of Goods sold to PA
We have a requirement to post COGS to COPA. We have costing based pa active. Cost element categry 01 requires a cost object and I have made it 12. What is the based practice to get a contribution margin from COPA. ? Can COGS be posted as a G/L accoun
-
Hi, Ridiculous question I know but here goes. I have a 2 1/2 hour show that I videoed on MiniDV and have edited in Final Cut. The image quality is as good as I want it, not perfect but fine, but when I export to use in DVD Studio I loose quality. I'v
-
Urgent:Unable to view the root organisational unit created in the PPOCE
Hi Experts, I have created a root organisational unit using the Tcode PPOCE.But I am unable to view the same in the selection area using the Structure search.It is appearing in the search term area but not in structure search. Please help it is very
-
Auto sales order creation upon ME21N
Hi, I am wondering if there is a way in configuration to automatically create a sales order document upon a PO creation? If standard not possible, can I do it via user-exit? Thanks YY