Freight cost in a purchase order when generating automatic freight cost

Hi Experts,
when i generate automaticly a Purchase Order whith a freight cost, in the PO it keeps the first freight in the Item Overview.
When it generate more freight cost in the same PO, the first Freight Cost stay in the Item Overview, and the freight cost is increasing in the Item : PO History. right.
Is it possible to remove the first entry from the Item Overview or put the total of the freight cost who are incresing in the PO??
Thanks in advance.
Dom.

Hi dev,
We did something similar last week. To charge the freight cost to the receiving party we did a manual service entry sheet for that.
We created a separate Po with Transport vendor and the receiving plant and account type is Z shipment costing and service item description as intercompany freight.
You will specify the limit of the amount here, and specify the G/L account here. Now create the service entry sheet withthe freight amount and settle.
I think you can follow the similar thing with additional lines for your requirement for other charges.
Since we want let the receiving plant pay the freight we didn't create the shipment cost document of LE-TRA.
Let see if any other suggestions comes.
Regards,
ratna

Similar Messages

Copy Pricing COnditions from Shipment Cost do to Purchase Order

Hi:
How can I copy all freight conditions on shipment cost document to the Purchase order created.
e.g. In shipment cost document a\I have following pricing conditions.
ZFRT - Freight - $250.00
ZFCL-Fuel Chrg - $25
ZCLN-Cleaning Chrg - $30
Total = $305 on shipment cost
When Purchase order is generated automatically.
I want same conditions on Purchase order instead of gross amt PB00 of $305.
How can we copy conditions from Shipment cost doc to the Purchase order??

Hi,
First of all I don't think that it is possible in the standard system. SAP only transfers the total cost of shipment to MM as you already found out.
Actually, if I remember well, the cost condition is transfered to a service entry sheet assigned to the purchase order item for the service agent.
From SAP help
http://help.sap.com/saphelp_erp60_sp/helpdata/en/93/74413b546011d1a7020000e829fd11/frameset.htm
Purchase Order Determination
Transfer and creation of the relevant documents in FI
Transferring Shipment Costs to Accounting
Transferring of shipment costs in order to create accruals comprises two functions:
Procedure
   1. In the shipment cost document, go to the detail screen of a shipment cost item, for which costing and account assignment has already been carried out and which you want to transfer to FI.
   2. Select the Transfer indicator. ...
   3. Save the shipment cost document.
When you save, the system creates a service entry sheet with reference to the purchase order determined, an accounting document for creation of accruals and further documents in FI.
IMHO it is good enough to transfer the total cost of shipment. It is the amount needed for accrual, and used afterwards for logistics invoice verification based on the automatically generated service entry sheet.
Why do you want more details in MM if you already have the detailed data in the Shipment cost document?
It is not the answer you want, but I hope it helps anyway.
Best Regards,
Franck Lumpe
Freelance SAP Consultant

No delivery costs exist for purchase order

Dear Friends,
While doing MIRO, i am getting an error message as mentioned below----
"No delivery costs exist for purchase order xxxxxxxxx"
Message no. M8014.
Kindly guide me in resolving the error.
Thanks & Regards,

hi
>"No delivery costs exist for purchase order xxxxxxxxx"
itself says that there is no delivery cost,
firstly check ur PO ,Did u entere the delivery cost conditions like for freight or octoi in the PO
or if u have entered the condition then check if it is not already invoiced
if u dont have delivery cost in po and wanna do IV for material then in miro
change the option of delivery cost to goods/service
(at right side of the po no field)
regards
kunal

Profit center substitution with internal order when generating GL doc from

Profit center substitution with internal order when generating GL doc from MM
Dear expert,
Please advise how to substitute successfully the profit center by which user-exit via FI substitution function.
Substitutions have been set for profit centers in FI via t-code OBBH, but the profit center will always be determined from the internal order when posting from MM subcon goods receipt
Thanks
James
Edited by: Yun-Chung Yung on Jun 3, 2010 10:46 PM

Hi,
SAP give note 539421 - Dummy profit center with cost center
account assignment. Looks applicable for your case.
Solution:
With the attached modification, you can restore the function from Release
3.1: The directly assigned profit center remains and is not overwritten
with the dummy profit center of the cost center.
The problem is not caused by a program error in this case. The profit
center is always derived from the existing CO account assignment even if
this is the dummy profit center (see also Note 62417).
This note applicable from release 40 until 605
I hope this can help you. FYI, in my case, i do not create dummy profit centre, then profit centre working as sap priority.
Regards,
Dewi

MRP not considering open purchase orders when planning for open sales order

Dear Experts,
1.I have open sales orders as well as planned Independent requirements for finished goods for the current month. Also I have open puchase orders for raw materials which is part of the Bill of material of the finished goods for the current month.
Please what do i need to do to make MRP consider my open purchase orders when the system is planning for the open sales orders.
2 what tcode can I use to delete all purchase reuisitions in the sytem

There was no response to these questions so i had to close it to make space for another

How Assign Costing sheet to Purchase Order?

Dear MM,
Please Guide me How Assign Costing sheet to Purchase Order?

Hello,
For costing sheet please refer the link below:
http://help.sap.com/saphelp_45b/helpdata/en/7e/cb815e43a311d189ee0000e81ddfac/content.htm
These Costing sheets are assigned to cost elements and then to the cost center.
By using Account determination field in PO you can assign the category for cost center and assign your costing to PO.
Please refer the below link for Account determination for a PO:
http://help.sap.com/saphelp_470/helpdata/en/75/ee0de955c811d189900000e8322d00/content.htm
Hope the solution is useful
Regards,
Swetha

Purchase orders created have automatically good receipt

hello,
I wish that Purchase orders created have automatically good receipt. What is the manipulation to be made? Thanks for your help.

Hi
U have to do setting movement wise in SPRO
Path SPRO-Material Management -Inventory Management and Physical Inventory - Good Receipts- Automatic Purchase Order Creation
But if you want to do automatic GR receipt u have to write customised program for creation of GR ( May be check BADI - Craeation for MIGO is useful) nand run batch job for the same
Edited by: Sanjay Shah on Feb 8, 2010 3:28 PM

How Preventive Maintenance Order Gets Generated Automatically

Dear Sir,
We have defined an equipment requiring Preventive Maintenance every month . We want that Preventive Maintenance Orders for this Equipment should get generated automatically for next comming 3 months .
Kindly guide us as what steps need to be followed so that Orders are generated automatically .
With Thanks & Rgds
Sonia

Hi for this please refer below link as u want call object in monthly basis kindly use single cycle plan for this.
[Please see|http://help.sap.com/saphelp_erp60_sp/helpdata/en/3c/abbcf6413911d1893d0000e8323c4f/frameset.htm]
Revert for any queries.
Rip

Bapi to post planned delivery cost of a purchase order

Hi every body,
         Can anybody please give me the full details of the planned delivery cost data
to post with BAPI_INCOMINGINVOICE_CREATE
what are the manditory fields,
I am using the following code , but a few are posting , remaining r not posting
but when I post the same through MIRO it is posted what is difference
this error was came
ERROR: enter good reciept data only when working with GR-based IV
REPORT ZBAPI_MIRO                              .
tables: ekko,ekbe,ekpo,lfa1,EKBZ,t000.
data: itemdata like BAPI_INCINV_CREATE_ITEM occurs 0 with header line,
headerdata like BAPI_INCINV_CREATE_HEADER occurs 0 with header line,
     return like BAPIRET2 occurs 0 with header line,
     DOC_NO LIKE BAPI_INCINV_FLD-INV_DOC_NO,
     FISC_YEAR LIKE BAPI_INCINV_FLD-FISC_YEAR.
DATA:error_flag.
data: item_data like EK08BN occurs 0 with header line.
data: begin of itab occurs 0,
             p_order like ekpo-ebeln,
             p_item like ekpo-ebelp,
             p_ctype like konv-kschl,
             p_lifnr like lfa1-lifnr,
      end of itab.
data: order(10) type N,
      vendor(10) type N.
data: begin of it_doc occurs 0,
            DOC_NO LIKE BAPI_INCINV_FLD-INV_DOC_NO,
            p_order like ekko-ebeln,
      end of it_doc.
PARAMETERS: fn LIKE rlgrap-filename OBLIGATORY.
DATA: FN1 TYPE STRING,
     l .
AT SELECTION-SCREEN ON VALUE-REQUEST FOR fn. "p_file.
CALL FUNCTION 'F4_FILENAME'
       EXPORTING
            field_name = 'FN'
       IMPORTING
            file_name = fn.
START-OF-SELECTION.
   FN1 = FN.
PERFORM upload.
loop at itab.
CLEAR: EKBZ,EKPO,LFA1,ITEM_DATA,HEADERDATA,itemdata.
REFRESH:itemdata,HEADERDATA,ITEM_DATA.
order = itab-p_order.
itab-p_order = order.
vendor = itab-P_lifnr.
itab-p_lifnr = vendor.
select single * from ekbz where ebeln = order
                           and ebelp = itab-p_item
                          and kschl = itab-p_ctype
                          and bewtp = 'F'.
select single * from ekpo where ebeln = order
                       and ebelp = itab-p_item.
SELECT SINGLE * FROM LFA1 WHERE LIFNR = vendor.
clear: item_data.
refresh:item_data.
call function 'ME_READ_COND_INVOICE'
   exporting
   I_BUDAT            =
    I_EBELN            = itab-p_order
    I_EBELP            = itab-p_item
   I_FRBNR            = ' '
     i_lifnr            = ' '
   I_XBLNR            = ' '
   RE_KURSF           =
   RE_WAERS           =
   I_RESWK            = ' '
   I_EKKI             = 'X'
   I_BUBIS            =
   RE_WWERT           =
   XEK08B_FLAG        =
   I_BELNR            =
   I_BUZEI            =
   I_READ_KRUEK       = ' '
   I_DISPLAY          = ' '
TABLES
    XEK08BN            = item_data
   XEK08BN_CURR       =
read table item_data with key kschl = itab-P_ctype.
headerdata-INVOICE_IND = 'X'.
headerdata-DOC_TYPE = 'KR'.
headerdata-DOC_DATE = ekbz-budat.
headerdata-PSTNG_DATE = SY-DATUM.
headerdata-REF_DOC_NO = itab-P_ORDER.
headerdata-COMP_CODE = 'HPL'.
headerdata-DIFF_INV = itab-p_lifnr.
headerdata-CURRENCY_ISO = ekbz-waers.
headerdata-GROSS_AMOUNT = item_data-WEWWR - item_data-AREWR .
headerdata-BLINE_DATE = SY-DATUM.
headerdata-DEL_COSTS_TAXC = 'V0'.
headerdata-PO_REF_NO = itab-P_ORDER.
headerdata-bus_area = 'OTHR'.
headerdata-ITEM_TEXT = LFA1-NAME1.
*headerdata-HEADER_TXT = .
headerdata-ALLOC_NMBR = itab-P_ORDER.
APPEND HEADERDATA.
CLEAR HEADERDATA.
itemdata-INVOICE_DOC_ITEM = '00001' .
itemdata-PO_NUMBER = itab-P_ORDER.
itemdata-PO_ITEM = itab-P_ITEM.
*itemdata-REF_DOC = ekbz-belnr.
itemdata-REF_DOC_YEAR = ekbz-gjahr.
itemdata-REF_DOC_IT = itab-P_ITEM.
itemdata-TAX_CODE = 'V0'.
itemdata-ITEM_AMOUNT = item_data-WEWWR - item_data-AREWR .
itemdata-QUANTITY = item_data-BPWEM - item_data-BPREM .
itemdata-PO_UNIT = ekpo-meins.
itemdata-PO_PR_UOM = ekpo-meins.
itemdata-COND_TYPE = itab-P_CTYPE.
*itemdata-ITEM_TEXT = .
append itemdata.
clear itemdata.
CALL FUNCTION 'BAPI_INCOMINGINVOICE_CREATE'
EXPORTING
    HEADERDATA       = HEADERDATA
IMPORTING
    INVOICEDOCNUMBER = DOC_NO
    FISCALYEAR       = FISC_YEAR
TABLES
    ITEMDATA         = ITEMDATA
   ACCOUNTINGDATA   = I_ACCOUNTINGDATA
   TAXDATA          = I_TAX
    RETURN           = RETURN.
if sy-subrc <> 0.
message e999(re) with 'Problem occured'.
else.
loop at return.
    if not return is initial.
     clear bapi_retn_info.
     move-corresponding return to bapi_retn_info.
      if return-type = 'A' or return-type = 'E'.
        error_flag = 'X'.
      endif.
     append bapi_retn_info.
    endif.
endloop.
if error_flag = 'X'.
   message e999(re) with 'Problem occured'.
    rollback work.
else.
      Return Table from BAPI call is empty
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
      EXPORTING
        WAIT   = 'X'
      IMPORTING
        RETURN = RETURN.
endif.
endif.
       write:/ 'Document no :', doc_no.
       it_doc-doc_no = doc_no.
       it_doc-p_order = itab-p_order.
       append it_doc.
       CLEAR IT_DOC.
endloop.
loop at it_doc.
   if it_doc-doc_no = ' '.
      write:/ 'purchase order not posted ' , it_doc-p_order.
   else.
   write:/ 'document no:' , it_doc-doc_no, 'p.order:' , it_doc-p_order.
endif.
endloop.
*&      Form upload
      text
--> p1        text
<-- p2        text
form upload .
CALL function 'GUI_UPLOAD'
exporting
    filename                      = FN1
   FILETYPE                      = 'ASC'
HAS_FIELD_SEPARATOR           = ' '
HEADER_LENGTH                 = 0
READ_BY_LINE                  = 'X'
DAT_MODE                      = ' '
CODEPAGE                      = ' '
IGNORE_CERR                   = ABAP_TRUE
REPLACEMENT                   = '#'
CHECK_BOM                     = ' '
NO_AUTH_CHECK                 = ' '
IMPORTING
FILELENGTH                    =
HEADER                        =
tables
    data_tab                      = ITAB
EXCEPTIONS
FILE_OPEN_ERROR               = 1
FILE_READ_ERROR               = 2
NO_BATCH                      = 3
GUI_REFUSE_FILETRANSFER       = 4
INVALID_TYPE                  = 5
NO_AUTHORITY                  = 6
UNKNOWN_ERROR                 = 7
BAD_DATA_FORMAT               = 8
HEADER_NOT_ALLOWED            = 9
SEPARATOR_NOT_ALLOWED         = 10
HEADER_TOO_LONG               = 11
UNKNOWN_DP_ERROR              = 12
ACCESS_DENIED                 = 13
DP_OUT_OF_MEMORY              = 14
DISK_FULL                     = 15
DP_TIMEOUT                    = 16
OTHERS                        = 17
endform.                    " upload

I think you need to implement user-exit EXIT_SAPMM06E_012 of enhancement MM06E005.
Look in OSS with seach term MM06E005 to get some examples.
Note310154 "ME21N/ME51N: Customer-specific check, generating error log" has some examples.
You should use the macros to set errors/warnings
Example:
mmpur_business_obj_id pt_ekpo-id.
mmpur_metafield mmmfd_partners.
mmpur_message_forced 'W' '00' '208' text-001 '' '' ''.
regards,
JG

Cost analysis through Purchase Order created from Sales Order

Hi Experts,
This is the scenario: There is an Item No. which is not stocked in warehouse and is purchased only when customers ask for it. The cost of the sales order line having this item is calculated by the Purchase Order line on which the item is there. (The PO have items for other Sales Orders as well. And, Sales Orders have multiple item types) The Sales Order have the PO no. against it and Purchase Order has SO no. against the line. This is all done using MS Access and Sage Accounts. Lots of free typing and manual cost analysis involved.
I have gathered from this forum that we can create Purchase Order from the Sales Order. The Document No. information can be pulled from one another using Formatted Search. Can we do the accounting and cost analysis as well?
Please let me know if I have not made myself clear.
Thank you in advance and kind regards.
IC
Edited by: iancameron03 on Sep 20, 2011 4:35 PM

Hi Ian,
I concur with Faraz, it is better if you use procurement document facility in doing back to back transaction from SO to PO.
However, in your case, I'm afraid you can't analyze the gross profit and recording the accounting related activity as your request using standard SAP B1 function.
As for gross profit case:
Since you're actually using workaround in order to evade all hassles in maintaining all item master data related to this case, you create just one item code called S1 right?
SO DocEntry - SO Line # - Item Code - Item Name - Quantity - Price
1001 - 0 - S1 - Table - 2 - 100
1001 - 1 - S1 - Chair - 8 - 25
1001 - 2 - S1 - Cloth - 3 - 10
PO # - PO Line # - PO BaseEntry (SO DocEntry) - PO BaseLine (SO Line #) - Item Code - Item Name - Quantity - Price
2001 - 0 - 1001 - 0 - S1 - 2 - 100
2001 - 1 - 1001 - 1 - S1 - 8 - 25
2001 - 2 - 1001 - 2 - S1 - 3 - 10
Note that standard B1 gross profit calculation is that system will compare selling price for each item with item cost / certain price list of each respective item. However, in your case, you put all item as a single item master. Thus, system couldn't compare Table to Table, Chair to Chair, Cloth to Cloth since the item cost for these 3 items will be the same, the price list for these 3 items will also be the same since it is actually only one master data. Of course you could update the gross profit calculation manually for each SO, but to be honest it seems rather weird to do this manually.
So, in order to simulate the gross profit calculation, you need to create a custom query and comparing PO line no with SO line no.
As far as accounting related recording concern, I'm afraid you can't do it
1. SO 1 : Item Table - Selling price 130 ; Item Chair - Selling price 30
2. PO 1 (linked to SO 1) : Item Table - Purchase price 100 ; Item Chair - Purchase price 25
3. SO 2 : Item Table - Selling price 150 ; Item Chair - Selling price 40
4. PO 2 (linked to SO 2) : Item Table - Purchase price 110 ; Item Chair - Purchase price 30
Correct me if I'm wrong, you want to record accounting wise that CoGS of Delivery based on SO 1 is 100 for Table and 25 for Chair, isn't it? No matter what costing method you use, you can't achieve this.
If you use moving average, system will average both Table and Chair cost price, since it is actually one item master data. Even if you distinguish each item as a master data, system will average the cost price for Table and Cloth by the time GR for PO 1 and PO 2 occurred.
Example (order by sequence of event):
1. GR based on PO 1 - Table - Purchase price = 100, therefore Item cost = 100
2. GR based on PO 2 - Table - Purchase price = 110, therefore Item cost = 105 (considering quantity only one for both PO)
3. Delivery based on SO 1 - Table - CoGS incurred will be 105, not 100
To certain extent, same thing could be said with FIFO costing method
1. GR based on PO 1 - Table - Purchase price = 100 (qty 1)
2. GR based on PO 2 - Table - Purchase price = 110 (qty 1)
3. Delivery based on SO 1 - Table - CoGS incurred will be 100 (qty 1)
4. Delivery based on SO 2 - Table - CoGS incurred will be 110 (qty 1)
At first glance, it seems right since the CoGS for SO 1 is 100, tied up with purchase price for PO 1. And CoGS for SO 2 is 110, tied up with purchase price for PO 2. But we're using assumption here, we're assuming the sequence of Goods Receipt of PO and Delivery of SO occurred in the very same sequence as the issuance of SO and PO.
1. GR based on PO 1 - Table - Purchase price = 100 (qty 1)
2. GR based on PO 2 - Table - Purchase price = 110 (qty 1)
3. Delivery based on SO 2 - Table - CoGS incurred will be 100 (qty 1)
4. Delivery based on SO 1 - Table - CoGS incurred will be 110 (qty 1)
If above scenario / sequence that happened, you will get the wrong figure of gross profit since the Delivery of SO 2 will take the item cost based on GR of PO 1. Since we're actually talking about real life business process, who can guarantee that above scenario wouldn't happen? It is possible that you send goods to customer who ordered late in real life, too much possibility that it is better for you to mitigate such result.
My suggestion would be that you record the accounting transaction based on standard business process, no need to really capture the actual cost and actual gross profit for certain SO and PO. Too complicated, and the software itself doesn't cater this kind of requirement. Best thing you could do only create custom query for gross profit simulation calculation, but for very accurate accounting recording, IMO you should forget it. Hope this help.
Best Regards,
Hendry Wijaya

Domestic Freight Condition type in Purchase Order

Hi Gurus,
We calculate the Domestic Freight based on zip codes from source to destination. Recently we implemented Goods supplier functionality which will determine the Goods supplier in the purchase Order only at the time of saving when there are multiple Goods suppliers assigned to the main vendor. In Goods supplier case the system should consider goods supplier zip code and plant zip code for calculaing freight. At the time of creation of P.O the system is determing the Goods supplier at the time of saving the Purchase Order so sytem is not able to identify the source zip code at the time of P.O creation...So system is picking main vendor zip code instead of goods supplier zip code.
Did anyone encountered this situation before..Is there any setting we need to do on condition type of the pricing procedure. Any inputs are appreciated.

Hi,
You might have have developed some custom funcationality...
If you are expecting always goods supplier zipcode...code has to check LFM1-goods supplier vendor code it is available in Parterns tab ...and needs to put this vendor into the table ADRC...
And try to explore function modules BAPI_VENDOR_GETDETAIL, ADDR1_EXTRACT_TABLES...
Hope it helps you...
Kuber

How to update purchase order when creating a new condition records

Hi,
We have the system configured so that whenever we update a condition record, a change pointer is generated. Then we the use of standard reports RMEBEIN4 and RMEBEIN, all open purchase order having that condition type is updated. However this only works when we update existing condition record. When we create a new condition record, this does not work even though the change pointer is created. Do the reports mentionned above works for the this case or another standard report that should be trigger.
Thank you for your help

hi,
May be this is working for the conditions already existing in the info record for the PO's. so when you have new condition record it updates only after you amend the PO with that condition and save it.
Kiran

LIV-Planned Del.Cost for Multiple Purchase order.

Hi Gurus,
I have following issue while doing LIV -T-code MIRO . Passing Planned del. cost (Imports -Custom Duty) for Multiple POs (Same Vendor)
Checked following basics.
1.In Po Planned Del cost are maintained .(Custom Duty)
2.in MIRO -Selected Layout All information and Planned Del. cost
3.In Details tab Entered Doc. type RI (inv. receipt-IM) for imports.
4.Entered all mand. details like Amount ,currencey etc
1.Selected Layout All information and Planned Del. cost
2.Selected in Po reference Tab- Purchase order/Scheduling agreement and in more allocation area ,I am entering mulitple purchase order.(say 2 Pos)
When I adopt required 2 Po and line items to be settled r desplayed. and Again when I enter.Only One PO is displayed and other vansihes.
I need Both the PO (multiple PO).
Please help in resolving the issue.
Thanks in Advance.
Regards
Amar

Hi,
Yes, it is possible.
In MIRO, click on "More Allocation Criteria" button besides Purchase Order field
here go to search help of PO in the Pop-up screen and enter the vendor code and company code and execute
Now select the POs and click on "Copy" button and now click on "Adopt" button in the pop-up screen
It will copy all the POs and then follow the normal procedure of LIV.
Regards
Amar

Default values in purchase order when using ME21

Need to add field default settings for SAP transaction code ME21 (create PO). The fields we want to add defaults to are: valuation type (EKPO-BWTAR) to default a text "ATT" and storage location (EKPO-LGORT) to default a value "03" when the user is creating a purchase order with transaction code ME21. I cannot find any exits or BAPI that will allow this and users do not want to use Enjoy screens. All help appreciated michaeljames8 at hotmail.com

Hi,
You can create the field exits using the program RSMODPRF.
Execute the program RSMODPRF and then give the data element of the field (BWTAR or LGORT).
and Execute again.
Then it takes you to function module screen with the name of the function FIELD_EXIT_BWTAR for BWTAR field and FIELD_EXIT_LGORT for LGORT.
Then inside the function module just give this code.
output = '123'.
Then by default you can see that value while you run the transaction.
Hope it helps.
Reward if it is useful.
Thanks,
Srinivas

Cannot save Purchase order when there is Warning Message

Hi,
I have this problem where system do not allow to Save the Purchase order (ME21N) when there is a warning message, for example "W: Can the delivery date be met?". By right I can just click enter and save the PO but now the system do not allow to save the PO until all warning message is resolved?? Why.
Pelase help.

Hi,
I believe that for warning message, you just need to press enter and it will go through.
Thanks.

Freight cost in a purchase order when generating automatic freight cost

Similar Messages

Maybe you are looking for