Cannot save Purchase order when there is Warning Message

Hi,
I have this problem where system do not allow to Save the Purchase order (ME21N) when there is a warning message, for example "W:  Can the delivery date be met?".  By right I can just click enter and save the PO but now the system do not allow to save the PO until all warning message is resolved?? Why.
Pelase help.

Hi,
I believe that for warning message, you just need to press enter and it will go through.
Thanks.

Similar Messages

  • MM:save purchase order uFF0Csystem display ERR

    save purchase order ，system display Err:
    1、No short text maintained in language ZF (please re-maintain material T6-60101)
    2、Purchase order still contains faulty items
    how i can do?
    taks you!

    Hi
    This is because for the material which you are using in the purchase order,you havent maintained the text in the material master record.So go transaction Tcode MM02 and enter your material.Then in basic data 1 view,at the bottom there is a tab for Basic data text.Click on that tab,it will take you to a additional data screen where you have to maintain a short text for thematerial in the language ZF.Then save it.
    Hope this will help you
    Reward if useful
    Thanks and Regards
    SHYAM.R

  • MRP not considering open purchase orders when planning for open sales order

    Dear Experts,
        1.I have open sales orders as well as planned Independent requirements for finished goods for the current month. Also I have open puchase orders for raw materials which is part of the Bill of material of the finished goods for the current month.
    Please what do i need to do to make MRP consider my open purchase orders when the system is planning for the open sales orders.
    2 what tcode can I use to delete all purchase reuisitions in the sytem

    There was no response to these questions so i had to close it to make space for another

  • How to block a sales order when there is a free good item .

    Hello Gurus ,
    How to block a sales order when there is a  free good item  , only the authorised person should have authorisation to release those blocked Sales orders.
    Reason - They want to have a track of free goods given to customer & to avoid the misusing things
    Looking  for your inputs
    Thanks in advance
    Regards
    Venkat

    Hi
    I think you can try with Status Profile in BS02 define and assign for item category TANN.
    In status profile you can block the delivery and also billing unless some changes the object status as released.
    Just try and explore
    regards
    Prashanth

  • Notification on skpe in iphone 6 does not display when there is incoming messages

    The user has a iphone6 and installed the latest Skype. However, when there is incoming messages, the badge(red counter) does not display in the icon.I have tried everything i could, background refresh, uninstall and reinstall,, check the settings and reboot the iphone a few times etc...but the notification badge simply will not show.Can anyone advise a remedy to this?Very much appreciated.

    I used Iphone 5 till yesterday with IOS 7.2 and older version of Skype and no issues at all . I could see group chats and every single chat possible on my phone as on my laptop Now i have an Iphone 6 and the newest software and the skype application I CAN ONLY SEE PEOPLE but not group chats on my phone . I dont get notification about the group but i can easy see on my laptop that there are chats missedOnly if the person msg me away from that group I can get the msg on my phone  WHy is this happening . How can i go back to old version of Skype and should i go back to it??Do I need to downgrade the softwareIm using Skype for business on a daily basis and group chats are crucial for my work  PLEASE HELP !! 

  • Any event which is raised when we save Purchase order after creating a new?

    Hi
    I need to know any event which is raised whenever we save a purchase order after creating a new one. I know event 'change' of object type BUS2012 is raised whenever we change a PO. Please help in this regard.
    Regards
    Swetabh

    Create event doesnt exist in BUS2012.check if custom business object exists for this by using 'where used list',probably it may have created event.

  • Not able to save purchase order

    hi
    i am a super user i have related the PO with the SO when i am saving the purchase order i am getting the error message " you cannot open rows in document [purchase order-rows-row status][line:0][message 131-194]
    Regards
    Manish

    hi the proble is resolved actually i had to disable the coding done in transitional notification and was able to save the purchase order
    Regards,
    Manish

  • Default values in purchase order when using ME21

    Need to add field default settings for SAP transaction code ME21 (create PO). The fields we want to add defaults to are: valuation type (EKPO-BWTAR) to default a text "ATT" and storage location (EKPO-LGORT) to default a value "03" when the user is creating a purchase order with transaction code ME21.  I cannot find any exits or BAPI that will allow this and users do not want to use Enjoy screens.  All help appreciated michaeljames8 at hotmail.com

    Hi,
         You can create the field exits using the program RSMODPRF.
    Execute the program RSMODPRF and then give the data element of the field (BWTAR or LGORT).
    and Execute again.
    Then it takes you to function module screen with the name of the function FIELD_EXIT_BWTAR for BWTAR field and FIELD_EXIT_LGORT for LGORT.
    Then inside the function module just give this code.
    output = '123'.
    Then by default you can see that value while you run the transaction.
    Hope it helps.
    Reward if it is useful.
    Thanks,
    Srinivas

  • How to delete message information while save purchase order

    Hi All,
    I' am trying to create a purchase order thru me21n. when i enter outline aggrement, contract and PO quantity fields with some values the message information which gets populated in MESSAGES should get deleted when I save the PO.
    can anyone suggest me any user exit or badi to delete message information before saving PO.
    Thanks,
    BJR.

    Hi Bjr,
    Check with this ME_PROCESS_PO_CUST and modify .
    Regards,
    Madhu.

  • Cannot close purchase order

    Hello,
    We have an purcharse order with several lines.
    Only 2 lines remain opened because open quantity is greater than 0.
    We would like to close one of the lines through Data/Close Row. That line had a initial quantity of 1000 units, and 800 were delivered. The 200 units wont be delivered, so we need to close the line. However, when trying to update the purchase order this message is appearing:
    "Another user-modified table" (POR1)
    We have make sure noone else was connected to that purchase order.
    Thank you in advance for your ideas!
    PD: We run SAP2005ASP1PL43

    Hi Vanessa
    We occcasionally got this problem and I would go home and try again in the morning and the problem had gone away. I am not sure why but it did. It may have something to do with all users having to log off.
    We also had a lot of problems with a patch level and I think it was 43. We could not close lines on sales orders or update business partner records, I cannot recall trying to close PO lines at the time. The problem went away when we went to 44.
    We have not had any of these problems with 2007.
    Regards
    Stewart Clark

  • How to update purchase order when creating a new condition records

    Hi,
      We have the system configured so that whenever we update a condition record, a change pointer is generated. Then we the use of standard reports RMEBEIN4 and RMEBEIN, all open purchase order having that condition type is updated. However this only works when we update existing condition record. When we create a new condition record, this does not work even though the change pointer is created. Do the reports mentionned above works for the this case or another standard report that should be trigger.
    Thank you for your help

    hi,
    May be this is working for the conditions already existing in the info record for the PO's.  so when you have new condition record it updates only after you amend the PO with that condition and save it.
    Kiran

  • How not to allow creating purchase orders if there is not info record

    Hi,
    I would like to know how to configure the system in order not to allow saving a purchase order for one material if record info hasn't been created. Right now, if record info for this material and the chosen vendor doesn't exist, the system creates it automatically, but I don't want this to happen.
    I also would like know how  to configure the system in order to show by default last price introduced for this material and vendor by when I create a new purchase order. 
    Thanks in advance,
    Luis.

    One more option, you can use badi ME_DEFINE_CALCTYPE. when there is no inforecord you can reset value of net price area. Here is a sample code we did for a customer;
          SELECT SINGLE INFNR FROM EINE
           INTO LV_INFNR
           WHERE INFNR =  IM_X_NEKPO-INFNR
           AND WERKS = IM_X_NEKPO-WERKS
           AND EKORG = IM_X_NEKKO-EKORG.
          IF SY-SUBRC <> 0.
            CH_X_LF_CALCTYPE = 'C'.
          ENDIF.

  • Cannot receive Purchase Order in SCM/SNC system

    Dear all,
    I'm implementing Purchase Order Collaboration scenario of SNC Collaboration within the following system landscape:
    ECC 6.0 <-> PI 7.1 <-> SCM 7.0
    What I need to do is to create Purchase Order in ECC and then receive it in SCM. The flow looks like:
    1. Create PO in ECC using me22n,
    2. Send it as IDoc (PORDCR1.PORDCR102) to PI
    3. Transform this IDoc into "ReplenishmentOrderNotification" XML Message in PI
    4. Send the "ReplenishmentOrderNotification" XML to SCM
    5. Finally receive/access PO in SCM
    Can you please specify the configuration to be made in PI to send this XML message to SCM (step 4)? I tried
    Communication Channels of type RFC and XI cinfigured as Receiver for SCM system but it didn't work out. So
    I cannot send the "ReplenishmentOrderNotification" XML Message from PI and then receive it in SCM.
    Thank you in advance for your kind suggestions.
    Best regards,
    Igor Keshishian

    Dear Nihil,
    That's exactly the document that I used to build the scenario. And I found it in your another reply on this forum.
    So the page 36 is the beginning of the configuration section for PI system that is done by me, no problems to
    configure PI's Repository objects. The real problem happens, as I've already explained, on runtime.
    Receiver Communication Channels to send XML files to SCM system are configured as XI adapter type with
    RFC destination of connection type H. This RFC destination is created in PI system and is pointing to SCM system.
    It has "/sap/xi/engine?type=entry" path prefix, so when I do its Connection test I got response code 500 "Empty
    HTTP request received". Still messages sent from ECC to SCM via PI are blocked in PI.
    What do you think I can check in configurations of PI and SCM systems?
    Thank you in advance.
    Regards,
    Igor

  • Creating a Purchase Order, is there any help out there?

    I am creating a purchase order for our sales team that can be utilized on iOS. I have two issues:
    1) Some of our sales will be exempt and will need to be toggled off. How do you go about doing this while not destroying the end total?
    2) Our sales tax varies due to county's jurisdiction. Is there a way to change that once the form is ready to be filled out?
    Thanks Guys
    Below is how my form is being set up, mind you this is an import from excel.

    I don't see a way for you to currently specify that an item is exempt...
    Maybe add another column with check-boxes for the exempt status. However,
    implementing this in the calculation will require a custom-made script.
    As for the sales tax, you can place that in a text field as well and use it
    in your calculation directly. It's even possible to set it up so that a
    selection in a county drop-down will automatically populate the Sales Tax
    field with the correct value.

  • Freight cost in a purchase order when generating automatic freight cost

    Hi Experts,
    when i generate automaticly a Purchase Order whith a freight cost, in the PO it keeps the first freight in the Item Overview.
    When it generate more freight cost in the same PO, the first Freight Cost stay in the Item Overview, and the freight cost is increasing in the Item : PO History. right.
    Is it possible to remove the first entry from the Item Overview or put the total of the freight cost who are incresing in the PO??
    Thanks in advance.
    Dom.

    Hi dev,
    We did something similar last week. To charge the freight cost to the receiving party we did a manual service entry sheet for that. 
    We created a separate Po with Transport vendor and the receiving plant and account type is Z shipment costing and service item description as intercompany freight.
    You will specify the limit of the amount here, and   specify the G/L account here. Now create the service entry sheet withthe freight amount and settle.
    I think you can follow the similar thing with additional lines for your requirement for other charges.
    Since we want let the receiving plant pay the freight we didn't create the shipment cost document of LE-TRA.
    Let see if any other suggestions comes.
    Regards,
    ratna

Maybe you are looking for