XML Message is status scheduled on R/3 side

Hi All
While trying to send message via outbound ABAP proxy i am getting my XML message in status "scheduled (commit work follows)" on R/3 side ... My queues are also registered .. I tested the HTTP connection to XI server also and it seems fine .. wonder why still no messages are appearing on XI system ?
Please provide help ?
Thanks

To register queues;
TCODE SXMB_ADM -> Manage Queues -> Register the Queues.
you can also run the report RSXMB_REGISTER_QUEUES

Similar Messages

Program to cancel xml message with status error or schedule ?

Hi,
Any program that can cancel xml message base on period. because i have about 100 thousand unuse xml message that accidentaly generated. because it is too long if i need to cancel 1 by one.
Regards
Fernand

Hi All,
I already try this program below :
RSXMB_CANCEL_Message - cancel the meesage with errors.
RSXMB_CANCEL_NO_COMMIT_MSG -cancel the message processing for messages without commit.
RSXMB_CANCEL_NOT_REST_MESSAGES - Cancel Xi messages with errors that cannot be restarted
but then no result selected. i need to select manual those message and cancel using cancel button.
please advise.
Thank you and best regards
Fernand

Reprocessing of XML Messages with status 003 i.e. Successfully Processed in

Hello Expets ,
I have to reprocess the XML messages which are already in successfully processed state ( 003 ) in ECC without posting the data due to some abap bug how am i going to do it.
Is there any way i can changes the status of the xml message to Manual restart possible or some other way to do it...!
Thanks in Advance

HI,
It's possible with some config change. (Hope your system is not production)
First solution:
The specified item was not found.
Second:
Insert the payload in RWB using test tab and send the data again

How to execute the messages in status 'scheduled' automatically?

Hi.
I find some messages every day which have status 'scheduled' for a long time - more then several hours. These messages use http adapter. When http server is not working, the messages scheduled, but not executed after http server become working. How to execute the messages automatically?

http://help.sap.com/saphelp_nw70/helpdata/en/96/8412417301ee6fe10000000a1550b0/content.htm
Is yours a EOIO scenario?

Message in status "scheduled for outbound processing"

Hi,
I was tring to perfom volume test. The scenario is XMLFILE --> XI --> IDOC(R/3). I reduced the polloing interval to 2secs and it went well for 15 min. Later I left it like that for an hour and found that all the messages are queued up scheduled for processing. I checked SMQ2 there were lot of messages. I deleted them all and then activated the queuse through SXMB_ADM ->Manage Queues transaction. In the QRFC Monitor I see the scheduler status as Inactive. I tried to make it active, it starts and becomes inactive again. Still I can see all the messages in SXMB_MONI. Are there any specific steps that we need to perform to clear the queues.
Thanks.
Srinivas Vaidyam

Hi,
it's normal for transaction SMQR to show the scheduler in status "Inactive" (it just happens not to be running at the
time you enter SMQR, a moment later you might have found it to be running).
Rather than just deleting all the queues you should have clicked on the queue name for a waiting message from SXMB_MONI (in the default SXMB_MONI display mode you need to scroll a bit to the right to the see which queue a message is in). Drill down on the next screen (double click the queue name etc.) to see a list of all queued messages including a brief description of why the first message got stuck. You can now either "retry" or "delete" the message. Then go back one screen and unlock the queue (open lock icon) if you find it not to be in the status running. Refresh the display to make sure that messages get processed.
Of course these steps do not need to be performed manually. There's an automatic retry mechanism and if that repeatedly fails the report RSXMB_RESTART_MESSAGES (which you will need to schedule) will try to resend the messages.
You should now cancel all messages belonging to this testrun in SXMB_MONI. Make sure that none of the queues are blocked and restart your test.
Regards,
Hans Christian

Messages with Status "Scheduled" or "Sceduled for Outbound Processing"

Hi All,
When i run my interface, sxmb_moni shows the status of messages as "Scheduled" or "Sceduled for Outbound Processing".
I know the reason and the problem gets resolved when I unlock the queues.
But, is there a solution that I can resolve this completely? Reason being, everytime the interface is triggered, I have to unlock the queues. And if it is ccBPM scenario, I have to unlock multiple times, to acheive the flow completion
Thanks,
Swapna

Hi,
Check if u have set the value for monitor parameter QRFC_RESTART_ALLOWED to 1. default is 0.Also if your queues are registered in SMQR.Also checvk these reports
· RSARFCSE: Restart an LUW (background job)
· RSARFCEX: Restart tRFC LUWs (background job)
· RSQOWKEX: Restart QOUT qRFC LUWs
· RSQIWKEX: Restart QIN qRFC LUWs
Thanks!
Edited by: sudhir tiwari on Oct 10, 2008 12:19 PM

How to HTTP-Post different XML messages to one receiving URL on XI side?

Hi
I have a problem with a HTTP => XI => IDoc scenario.
A client want to send 4 different XML documents to only 1 receiving URL on the XI side. How can I handle this in XI???
To send XML data via HTTP to XI you have to specify the namespace, interface and service in the URL. But I only can specify 1 namespace, interface and namespace in the URL...
But how can I define a generic message interface for all 4 messages.
The solution with 4 receiving URL's is easy, but not workable for the client
Thx
manuku

You can do following:
Create an interface with an artificial root node like this:
root
- structure message 1
- structure message 2
- structure message 3
A simple XSLT/Java mapping adds that root node to every message.
Create different mappings based on the structure if the different mappings and do routing based on the same.
Another option: Upgrade to PI 7.1. Here you can simply create a service interface with different operations and routing/mapping based on the operations.
Regards
Stefan

XML message ok in SXMB_MONI, but not delivered

Hi there,
I am new to PI and have a question regarding monitoring of an interface.
We have a problem that a SOAP request doesn't reach its receiver.
When I have a look at SXMB_MONI the XML message has status "successfully processed" (race flag as indicator).
But if I check on [http://<HOST>:<PORT>/MessagingSystem/monitor/monitor.jsp|http://<HOST>:<PORT>/MessagingSystem/monitor/monitor.jsp], there I see that the message for the same interface has status "not delivered".
It shows me the following error message:
MP: exception caught with cause com.sap.engine.interfaces.messaging.api.exception.MessagingException
How can I investigate more on this to find out why the interface doesn't work?
I have the impression that the monitoring of PI interfaces is quite unstructured.
Is there a good tutorial/blog which shows where to look for this information?
Thanks in advance!

In the message monitoring I've messages with status 'Not delivered'.
If I display them, I just see error messages like
MP: exception caught with cause com.sap.engine.interfaces.messaging.api.exception.MessagingException
Adapter Framework caught exception: null
Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException.
How can I see more detailed error messages???

XML Messages in "Scheduled" status

Hi all,
The case is at ERP side running transaction SXMB_MONI, some XML messages from XI to ERP are found in "Scheduled" status. Around the same time, siimilar messages using same receiver interface are processed successfully. When we manual restart the "Scheduled" message, there will be an entry in READY status at inbound queue and we have to unlock the queue. After that, the message will be processed successfully.
Here are my questions:
(1) Why some messages in "Scheduled" status but similar messages are processed successfully?
(2) Is there any alert or notification mechanism that we can setup instead of running transaction SXMB_MONI manually?
(3) Is manual restart XML message a proper way to handle those scheduled message? Any way to automatically handle this message in ERP side?
Thanks in advance.

Donald,
Here are the answers to ur questions.
(1) Why some messages in "Scheduled" status but similar messages are processed successfully?
Some times the queues get stuck for various reasons. one msg will cause bottleneck for all other msgs behind it. there is no proper reason why this happens, however if it happens regularly then u will have to give it a thought.
(2) Is there any alert or notification mechanism that we can setup instead of running transaction SXMB_MONI manually?
Well, if the msgs r in the scheduled state then NO.
(3) Is manual restart XML message a proper way to handle those scheduled message? Any way to automatically handle this message in ERP side?
Manual restart is not the best way to handle msgs bcause you might loose track/ some msgs might error out together causing issues. (that has happend to us). its tough to keep track if that is the case and if its critical from business point of view.
If it is going out of R/3 then may be you can configure jobs to push the data periodically.
Regards,
Pavan

Manage Queues - Messages are in Schedule status after upgrade to ERP2004

Hi,
We upgraded SAP to version ERP2004. ABAP proxy XI messages are in schedule status even though we deregister and register & activated all queues.
When I click on the queues it is in running status.
Does anyone has any idea where should I look?
Thanks in advance!
Mrudula

Hi,
my scenario is file to idoc....
I have set paraemter in SXMB_ADM as below.
Category Parameters CurrentValue DefaultValue
RUNTIME HTTP_TIMEOUT 100000 0
I have gone through as you suggested still when i double click on message in SXMB_MONI...i am getting Runtime Error (TIME_OUT).
Please do help me..
Thanks in advance.
Krish

Messages goes into scheduled status in adapter engine

Hi all
we are doing idoc to file scenario with direct mapping. the messages are getting processed in integration engine sucessfully. the messages are getting into scheduled status in the adapter engine even when there is less load in the server.
Thiis specially happening for IDOC to file scenario only. Any help is highly appreciated
Thanks

>
> the system is quite good at the moment but the some of the messages again into scheduled status like ( 10 out of 1000 messages ) . the system is not performing at 100 % rate since some messages moves to scheduled status. Is still the performance can be improved in any other ways ?
>
This is really strange behaviour , If Communictaion channel functioning correctly then all succesfull messages should deliver to Receiver system.
Better to check payload of scheduled messages(if wrong payload obiously it goes schedule status),try to to reprocess them.
I never used XCOPY command,so no comment on that.
Regards,
Raj

Messages remain in Scheduled status in message monitoring in RWB

Hi PI experts,
I have got a situation where there are several messages showing in the Scheduled status. I followed the path RWB > Message Monitoring > Adapter Engine > Database (Overview) > Display.
QoS for these messages is EOIO, however there are no messages stuck in the queue. All other channels are running smoothly. Only with this particular channel the messages remain in Scheduled status for a long time.
I am neither able to make out the roor cause nor reprocess/resend these messages. Pleaes help.
Regards,
Dhawal

Hi Suraj,
What you said is absolutely correct. However, as I mentioned, the error message was not visible in RWB.
My problem just got resolved. What I did is this,
I followed the link http://<server>:<port>/MessagingSystem/monitor/monitor.jsp which is SAP Message Display Tool.
Here in EOIO Sequence Monitor I found the error message and it's predecessor. When I resent the erroneous message from here, all subsequent Holding messages got processed.
Thank you everyone for your help. Have a gr8 day...
Best Regards,
Dhawal

Outbound status to delete XML messages in PI

Hi,
we are using a deletion process in PI wiith the pg RSXMB_DELETE_MESSAGES but the XML messages with a outbound status = 1 cannot be deleted. It seems that the pg SXMS_REFRESH_ADAPTER_STATUS permits to change the status to 6 but does not work for me.
So, I need guidance. For information, we condigured the deletion period (10 days).
Thank you

Hi Pascal,
You should try to manually confirm the messages (in SXMB_MONI - Cancel Processing of messages with Error CTRL F8) and then run all the deletion jobs again.
Please see Note 872388 and 820149 for details. Following is the relevant portion from 872388:
"Check if there are asynchronous messages in error status.
Asynchronous messages in error status are neither deleted nor archived.
This behaviour is different to erroneous synchronous messages which get
deleted after their retention period (see step 5) has expired).
Asynchronous erronous messages, however, must be cancelled and then be
archived. You can either use transaction SXMB_MONI, search for erronous
messages and manually cancel them. Or you can use the report provided by
SAP: RSXMB_CANCEL_MESSAGES. Should you decide (for non-productive
systems only) that you would like to delete these manually cancelled
messages, please use note 820149."
Regards
joel

CCMS alert on XI interface monitoring : Error status of XML Messages

Hello Everyone,
Please can anyone let me know on how we can setup ccms alert monitoring on tcode: SXMB_MONI for XML messages which are in error status. Do we have any MTE class available in XI system ?
Please share your expertise on this ..
thank you !
Regards,
Tushar Rathi
Edited by: Tushar Rathi on Mar 23, 2011 9:24 AM

Hello Everyone,
Please can anyone let me know on how we can setup ccms alert monitoring on tcode: SXMB_MONI for XML messages which are in error status. Do we have any MTE class available in XI system ?
Please share your expertise on this ..
thank you !
Regards,
Tushar Rathi
Edited by: Tushar Rathi on Mar 23, 2011 9:24 AM

IDOC XML Message status:029

Hi all,
in RSXMB_SHOW_STATUS i have 21.000 messages in status 29.
How can i delete them ?
Regards

Using SXMB_ADM you can either archive or schedule jobs.
But before doing set retention period in same transaction " Define Interfaces

XML Message is status scheduled on R/3 side

Similar Messages

Maybe you are looking for