FRENCH NEED HELP ( Already Post ) iPod Nano 4G Stay on Apple Logo

Je suis francais.
Mon ipod même apres tout essai .
( Formatage , Reset : Menu + bouton central 6secondes Blablabla , Downgrader etc.. )
ne fonctionne pas et reste sur Le logo Apple... -.-'
: Ipod Nano Chromatique , 8GB , 4Generation.
Facebook : www.facebook.com/Kwon.Ji.Yong.FR

Have you tried a hard reset?  See this article for the appropriate instructions on performing a hard reset of your iPod.
http://support.apple.com/kb/ht1320

Similar Messages

  • TS1399 i need help with my ipod it is stuck on apple logo its an ipod touch 5.1.1

    can you help my ipod touch is stuck on the apple logo 

    - Reset the iOS device. Nothing will be lost       
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    Othewise do the following with iTunes and a computer
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • Need help with my ipod nano

    Hi,
    I need help with my ipod nano.
    I haven't turned it on in a while and suddenly it stops working when I try to turn it on again.
    Sometimes it displays:
    "www.apple.com/support/ipod"
    And right now it's displaying "OK to disconnect".
    Could somebody please advice what should I do?
    Thank you

    I need help.
    I have my IPOD nano for a while now and about a week ago. My husband bought one for his newphew and he had me download all the songs into the new IPOD (2nd Generation). Now Im having problems with mine. Everytime I try to charge and usually the screen will pop up to my original music player. This is what it says now when I open or charge my IPOD.
    "The File iTunes Library.it! cannot be read because it was created by a newer version of iTunes".
    Now, that I listen to it...all the music skip. Please help me..what should I do??
    Thank you

  • I need help restoreing my ipod nano 3rd gen so its like new

    I need help restoreing my ipod nano 3rd gen so its like new

    Plug it to your computer using iPod USB Cable (any cable should work excluding iPhone 5 and Shuffle cables)...... when you see your iPod in iTunes go to that iPod and click restore...... the whole process should take (depending on what you have on your iPod and its is up to date) it should take no longer than 30 minutes...... then it will ask if you want to set up as new iPod or restore from back-up (itunes back up), since you said:
    so its like new
    click set as new iPod and follow through what they said.

  • HT1329 hi i need help with my ipod nano i want to get my music from my ipod to i tunes so that i can be able to transfer the music on my i tunes to my ipad mini can you help me with that ?

    hi i need help with my ipod nano i want to transfer my music from the ipod to the itunes so that i can be able to transfer the music to my ipad can you help me with that ?

    You cannot use iTunes to transfer song files from iPod to computer, except for songs purchased from the iTunes Store.  However, there are third-party methods and utilities that can transfer from iPod to computer.  If you do an Internet search on something like"iPod transfer," you should get some links.  (The CNET article seems to be popular.)
    Once the song files are on your computer's drive, you can add them to your iTunes library, and then sync your iPad.

  • IPod nano 3rd gen. Apple logo remains on screen and iTunes doesn't recognise it's plugged in, I can't even turn it off. I've tried to get to disc menu but when I hold the 'menu and select button' it reboots it doesn't recognise the select and play button

    iPod nano 3rd gen. Apple logo remains on screen and iTunes doesn't recognise it's plugged in, I can't even turn it off. I've tried to get to disc menu but when I hold the 'menu and select button' it reboots and then doesn't recognise the select and play button to show the tick. I'm helpless.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                 
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Need help with the ipod nano

    I installed my ipod nano today and my computer recognizes the ipod but itunes wont' work. when i click on it to start it it brings up the license agreement and then it disappears and itunes never starts. can anyone help?

    hi badgirl!
    when i click on it to start it it brings up the license agreement and then it disappears and itunes never starts.
    gaaah. do you also see a similar sort of thing happen when you try to launch your QuickTime? (a brief flash of the screen, but then nothing?) are you getting absolutely no error messages whatsoever, just the flash and then nothing?
    the most likely cause of those symptoms is infestation of your PC by Qoologic adware. the free trial version of Ewido has been cleaning that up for most people:
    ewido anti-malware download
    love, b

  • I need help with my ipod nano!

    Hi,
    My ipod nano says that it is not on shuffle but if i press one song, it will just skip to a couple songs after that. I tried plugging it into my computer and into my IHome but it still does this.
    What Should I do?

    Welcome to Apple Discussions!
    Are the songs that it is skipping purchased (all of them)?
    If not...
    Try resetting your iPod...
    Resetting iPod
    If that doesn't work, make sure your iPod's software is up to date...
    iTunes
    iPod Updater
    Updating iPod's Software
    If you updated and the problem persists, try a restore...
    Restore the iPod
    This may also be helpful...
    Troubleshooting Songs That Skip On iPod
    btabz

  • I NEED HELP WITH MY IPOD NANO NOW!

    when ever i plug in my ipod nano it says do not disconnect on my ipod nano and starts to charge other than that there is no other recognition that its plugged in i go to itunes and do edit preferences but it still says no ipod is connected i tried restoring it, updating, rebooting ,everything all the other answers seem complicating is there an easy answer any one can give me that will help my windows recognize my computer the apple support group has been no help and i would really appreciate someones help

    See if this article helps
    iPod missing in "My Computer or in iTunes on Windows:
    http://docs.info.apple.com/article.html?artnum=61711

  • I need help wit my ipod nano its frozen?

    I bought my ipod nano on Dec.17 and today i was lsitening to it and out of know where it froze and now i cant turn it off or anything

    Since this is actually a probable with your Nano & not iTunes. I would suggest you post in the Nano forum in the iPod discussions.

  • I need help on my iPod Nano 3rd Gen.

    Ok. I was really dumb so I took my iPod Nano 3rd Generation to my cousins house and he has a Win95 computer that HAS NO ITUNES! I plugged it in and it asked me if I wanted to format it to the computer so I could use it. (And it said it will change and erase everything on the iPod) SO everything was erased. All the folders. Everything. Now when I went home I plugged in my iPod to my Macbook the iPod does not connect to iTunes. It just connects to the desktop and shows up on the desktop instead on iTunes. So I right clicked on it and clicked "Get Info" the Kind: Volume and the Format: MS-DOS (FAT32). I'm gonna be in trouble if i don't know how to play songs on the iPod anymore

    http://www.apple.com/support/ipod/five_rs/nano3gen/#

  • Ipod nano just shows blinking apple logo

    I accidently disconnected my ipod when it said don't disconnect. Now the screen just blinks the apple logo and won't let me restart or restore or update and my computer doesn't even recognize it anymore. what can i do to fix it?

    A. Try to connect your iPod with another computer with the iPod updater pre-installed.
    B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
    For Mac computer
    1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
    2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
    3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
    4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
    5. Eject your iPod and do a Reset
    6. Open the iPod Updater and click “Restore”
    For Window computer
    Go to folder “My Computer”
    Hope you can see your iPod there and right click on the iPod
    Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
    Now select “Format”
    Eject your iPod and do a Reset
    Open the iPod Updater and click “Restore”
    In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“Partition Magic”.
    C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
    Tips
    a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iPod updater.
    b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
    c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
    D. Format your iPod with a start disk
    I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.

  • IPod nano 3g stuck at apple logo

    I bought an ipod today and it was really cheap and the seller told me that the only thing it do is show apple logo. As the seller was a elderly person i tought that maybe he did not tryed to restore it or even connect it to computer (ipod was only electrical thing he sold, other things was just antiques).
    So i connected it to my mac and opened itunes, it did not recognize it and i tryed to hold down the menu and select keys, then it restarted and itunes told me to restore it, so i tryed but as soon as itunes completed the " preparing ipod to restore " it restarts again and same apple logo is visible.
    Also sometimes i have to do like 5 restarts before itunes sees it. Also i tryed to enter the diagnostics mode and the disk mode but it did not work for me. I have no idea what software is on the ipod or does it even have working software on, maybe somebody just pulled the plug out when they updated it and now i have it. I hope somebody can help me.
    Thanks!

    Hi there Rasss,
    You may find the troubleshooting steps in the article below helpful.
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/ts3281
    -Griff W. 

  • IPod nano beebs and shows apple-logo every startup (now)

    Just got my black nano a couple a days ago.
    But just now, everytime it turns off and I'll press the center-button to turn it on it beebs and shows the apple-logo for like 15-20 seconds. It didn't do that before and Im just wondering if this is normal?
    Thanks
    /Gustaf
    Message was edited by: Gustaf E

    It seems this problem only appears when I have a movie in my iPod Nano. Therefore the long startup time I guess.

  • Need help for new iPod Nano user(s)

    Please help: My daughter has an iPod, with an iTunes account. My wife just rec'vd a Nano for Mothers Day. How can I install both iPods on the same computer? I don't want to screw this up. Can I add another user to the first iTunes/iPod account?
    Thanks -

    hiya!
    these resources should be helpful with that:
    Natalie Beresford: multiple iPod/iTunes installations
    How to use multiple iPods with one computer
    iTunes: How to share music between different accounts on a single computer
    love, b

Maybe you are looking for

  • What data does SNMP return and what is the best way to explore it?

    Hi All I have some queries about using SNMP on Cisco devices. 1. What is the best way to get an idea of what data MIBs can return? I have entered the commmand "show snmp mib". However, the number of MIBs generated is huge! 2. Can you enter a command

  • Putting Video on my Zen Visio

    How do I put my own, already owned DVD's onto my player? I've tried to format the video and everything, but I can't get the movies on there, there is more than enough room, but they just wont transfer.

  • Altering default user template in 10.6

    Hello, Can anyone post explicit instructions for the simplest way of altering the default new user template in Snow Leopard? I need to alter the template so when a new account is created, it already has the bookmarks, settings, desktop image, etc tha

  • How to access JMS queues in the SAP J2EE Engine?

    Hi Gurus, Can anybody know how to access the jms dead message queues in the XI J2EE Engine (which is WAS 6.40)? I have read in the SAP documentation that we can use some JMS commands from the telnet. I don't know how to use those commands. Can anybod

  • Hyperion Intelligence

    <p>1. Can we export the data in Excel sheet in multiple tabs.<br>that is if I have 12 months data, I want in Excel sheet with datafor each month in a separate tab but with Names for the tab likeJan ,feb etc ....<br><br>2. Can we export the Data with