Frequency distribution on  ceiling(measure/100) not working always sums

I'm trying to create a frequency distribution on a measure total time in secs in usage tracking and I can't seem to get the measure to not sum.
I've tried:
case (ceiling(measure/1000) as char(5))
setting the "Treat as an attribute column" in the column formula
setting aggregation rule to "None" in the column formula
Any suggestions would be appreciated

in 11G I have found that for this to work the column you are using cannot have an aggregate rule in the rpd.

Similar Messages

  • JBoss cluster shared session not working always

    Hi all,
    I am using JBoss AS 4.0 for my Application, recently we need to scale the application, so we added another JBoss AS 4.0 in cluster. It is working fine with sticky session.
    But we need to share the session state so we made the changes in JBoss service .xml and the Appache for shared session, as described in the Jboss administration documentation, but the session shareing is not working always, some time it is working, suddenly the session in the clustered server gone out,
    please advice me what if i am missing, i cannot figure out
    thanks in advance

    Hello. I actually raised a support request to Microsoft about this. It seems from my testing that when using user profile disks in 2012 r2 that shared activation doesn't work. Last update this was with engineering team at MS. Will update when they have
    confirmed this is an actual bug.

  • MEASURE "QTD" not working

    Dear All,
    Our Company has installed BPC ver-7 from last 2 years.It seems that the Measure "QTD" for the balance sheet items are not working.Can anyone help me out on the matter.It seems all the figures viz.- for YTD,QTD & monthly data gives me a same figure only.so i cant  make out
    Is there was a fault @ the time of implementation or what??
    Thanks in anticipation
    Jignesh Bhatia

    Can you be more specific perhaps with an example.
    For example looking only at Cash Balance on Jan, Feb, and Mar and assuming the Accttype property is AST....
    If data has been loaded for 100 Jan and 20 for Feb then on a report you must include both time and the measure.
    The expected results would be as follows:
    Time,Measure
    Jan, periodic   100
    Jan, QTD         100
    Jan, YTD         100
    Feb, periodic   120
    Feb, QTD         120
    Feb, YTD         120
    Mar, periodic   0
    Mar, QTD         0
    Mar, YTD         0
    The Mar results are somewhat annoying especially on a report that has the whole year or is quarterly only.  The reason March is zero is because no data has been loaded so the QTD,YTD formulas for any AST or LEQ type is take the balance of the last period.
    Now if someone has been changing the formula there is a transaction code to go and correct it.

  • One of the frequencies on Verizon FIOS TV does not work, and I can't get certain HD channels

    So I've had two techs out to check the box outside my house where the wire comes in from the pole.  The problem is I cannot get HD TBS, TNT, Fox Sports 1, Comedy Central and many other channels.  These channels come in over the frequency that kicks out a fault (I saw when the 2nd tech came in and hooked my coax from the box outside my house directly into the tester)
    The tech confirmed it was not coax in my house, but connections outside.  he changed those connections and then all of a sudden it worked.
    Two days later, not working again.
    Verizon is incapable of figuring this out or setting me up with an appointment that is not in the middle of the work week at 2pm (i've already taken two days off from work to try and get this fixed...shall I just take a week long vacation and devote it to them?)
    Anybody ever run into this and figured out a way to fix it yourself, since Verizon hasn't a clue?
    thanks

    Your issue has been escalated to a Verizon agent. Before the agent can begin assisting you, they will need to collect further information from you.
    Please go to your profile page for the forum, and look in the middle, right at the top where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
    Under “My Support Cases” you will find a link to the private board where you and the agent may exchange information. This should be checked on a frequent basis as the agent may be waiting for information from you before they can proceed with any actions.
    To ensure you know when they have responded to you, at the top of your support case there is a drop down menu for support case options. Open that and choose "subscribe".
    Please keep all correspondence regarding your issue in the private support portal.

  • Enable Commenting & Measuring in not working

    I am having pdf Dynamic XML Form(Interactive form). and trying to Enable Reader Extended Features.
    I just go through the File --> Save As --> Reader Extended Features --> Enable Commenting & Measuring
    But Option is not working. It is Clickable but nothting it prompts.
    The same option is working in Old version of same form which is also Dynamic Xml Form(Interactive form).
    Please Help.
    Thanks in advance !!

    Santosh,
              Really thanks for your consideration.
              Yes , i found the reason, the difference only is Old version is static pdf form and i also found that a no. of event are not working in this due to static functionality, which are passing very fine in Dynamic form.
    But question is still there.Is Dynamic form(Xfa based) does not show Commenting & Measuring  functionality???

  • Multicast rtmp - rtmfp republish does not work (always new netgroup)

    publish an multicast video stream with fmle 3.2
    start the multicast stream - stop - start
    fml should use the old netgroup
    log file
    http://paste.railsbox.eu/show/669/

    Hi John,
    Thank you for your reply. Better late than never! Am glad I
    got a response :-)
    It does indeed sound like a caching pb on the server and that
    was my initial request the net admins. Unfortunately did not work.
    In the meantime I made my case to the net admins that I needed
    admin rights to the Roboengine in order to succesully reach my job
    objectives and after a some time they accepted :-).
    I looked closer and really could not figure out what the pb
    was: all the new files were physically there but the TOC, index and
    CSH does not update. Accessing the project locally rendered the
    same pb.
    My only solution was to delete and republish. Worked fine.
    Perhaps somebody could test this behaviour in a different
    environment and see what they get?
    Steps to reproduce:
    1°) Create an RH project (e.g. Project1.XPJ), create
    TOC, index and CSH and publish to the server using a name (e.g.
    Project).
    2°) Create another RH project (e.g. Project2.XPJ) create
    TOC, index and CSH (different to the first one) and publish to the
    server using the name as the initial project (i.e Project).
    - Chris.

  • Hold Switch On and Off not working - Always ON

    Hi,
    I am having a serious problem with Hold Switch which is all the times in ON condition though I am moving right and left. None of the buttons are working because its in Locked state. Hold switch is not working. Is it a product related issue where in I need to go to store or is there any way to make it work.

    Well it used to be that the iPods were not all that hard to open, especially with some simple plastic opening tools. However the new Classic line feature a brand new case design that to the best of my knowledge, no one has figured out how to open without breaking the case pieces. This is why if you look at many of the third parts battery sellings and iPod repair places, none are yet selling replacement batteries due to the inability to get into the ipod without ruining the case.
    That said, if you do have a Classic, then it is obviously still under warranty since it just came out. Therefore, I would hit up your local Apple store or send it in if you don't have one near by. The hold switch not working is a warranty issue that they should cover.
    Patrick

  • COPA_Characteristic Derivation Rules is not working always

    Hi,
    I am currently facing an issue with Derivation rule and hope someone can help me on resolving this.
    Please look into the below requirement:
    Every 4 year there are social elections. They sell the materials partially via one-off orders and partially via contracts with a limited valid period. For reporting, all sales for the social elections may not be considered as u2018contractu2019-turnover but as one-off-turnover.
    Therefore the derivation rule must be adapted as follows: if material group 3 = u2018social electionsu2019, the type of sales must be one-off.
    So between rule 67 and 68, 2 new rules must be added:
    If Material Group 3 (MVGR3) = D16 or F12 -> invoice Mode N2 (MVGR3 ) must be filled with 22.
    Accordingly I had added these 2 new rules, with Conditions MVGR3 = D16, Constant =22 and Target field = Invoice mode N2
                                                                                    MVGR3 = F12, Constant =22 and Target field = Invoice mode N2     
    Now the user has come back saying that it is working for one release order and it is not working for another release order.
    If material group3 = D16, then sales mode should be '2'. This is working for one release order and for another release order the sales mode is displayed as '1'.
    Can anyone let me know where is the exact error at the earliest.
    Thanks in Advance,
    Deepthi

    Hi Deepthi ,
    The best way to find out is to check the characteristics in both the release orders seperately ..
    Go to Transaction KE21S   ( Select Record Type F , Point of Valuation 1) and simulate the characteristics derivation for both the orders seperately ..
    . For simulation .. enetr parameters like order no , company code , plant .. etc and click on derivation .. System will derive the sales mode .. for both the orders . You will be able to find out the differences in characteristics .. which is causing the issue ..
    Instead of KE21S .. you can also use transaction KEDR . In KEDR screen , enter (F8) or click on test icon and simulate the characteristics derivation..
    Hope this will solve your issue .. Please revert back for any further clarifications..
    Regards
    Sarada

  • Send-Mailmessage command not working always

    Hi Experts,
    When i execute scripts with send-mailmessage command it works sometimes and sometimes it is not working :(
    i believe this is due to timeout issue or the server is busy at the time of script execution. Please find the error message below
    I need to make sure this command works and we get emails because I'm planning to make this script in schedule job.
    is there anyway to write a script like if this commands show this error, execute same command until it sends the email.
    Regards, Nidhin.CK

    Hi Rhys,
    Sorry above mentioned code was not working so i tried below code and its working fine
    $i = 0
    Do{
    $MailError = $null
    try{
    Send-MailMessage -SmtpServer $smtpservername -To $toaddress -From $fromaddress -Subject $subject -Body $body -BodyAsHtml -ErrorAction Stop
    catch{
    $MailError = $_.Exception.Message
    if ($MailError -ne $null){
    $i++
    Write-Output "[SOX1] - " $i
    Start-Sleep -Seconds 5
    } else {
    $i = 0
    }while ($i -ne 0)
    Regards, Nidhin.CK

  • Using named set in calculated measure is not working

    Hi Techies,
    I need an urgent solution. Here is my problem,
    I have a product dimension which has some "n" no of products. I need to create a measure with few members from the product dimension. (e.g. Sales for laptop & mobile explicitly, out of other electronic gadgets)
    I have created a static named set for some n number of products and a calculated measure in which I have included this named set as below,
    CREATE SET CURRENTCUBE.[Compact]
     AS {[Dim Prod].[Gadget].&[Laptop],[Dim Prod].[Gadget].&[Mobile]} ;        
    CREATE MEMBER CURRENTCUBE.[Measures].[Compact Sales]
     AS ([Compact],[Measures].[Sales]), 
    VISIBLE = 1   ; 
    but when I browse the cube the above measure is returning Null value. When I change the named set to dynamic, the measure is showing value but no filters(laptop & mobile) seems to be applied for that measure unless I add that named set explicitly in
    the filter area.
    I need a solution where I don't want to use any filters but the measure should work as expected.
    Please help me with this, it is very urgent.
    Thanks in advance,
    Latheesh
    latheesh

    hi Latheesh ,
    I'm not sure why do you need to create a new measure .. There is a problem to aggregate a set in a calculated member . I will suggest a new member on your
    Gadget dimension :
    CREATE SET CURRENTCUBE.[Others_Set]
     AS {[Product].[Product Categories].[Category].&[4],[Product].[Product Categories].[Category].&[1]} ;        
    CREATE MEMBER CURRENTCUBE.[Product].[Category].[Others]
     AS Aggregate([Others_Set]), 
    VISIBLE = 1   ; 
    select [Product].[Category].AllMembers on 1
    , [Measures].[Internet Sales Amount] on 0
    From [Adventure Works]
    Regards, David .

  • DDTS-100 not work

    Hi. I recently obtained a DDTS-00. It worked fine, until today. I used it for a short while, then turned it off. I came back an hour later, tried to turn it on, but nothing happened. The red light wasn't on like normal. Power was plugged in, and the power supply felt slightly warm (but not as warm as when the DDTS is working.) The outlet was fine. I tried another outlet anyway, but had no luck. The power supply isn't generating any heat now, either.
    Seems to me like the power supply isn't working. Anyone else have these troubles?

    Your connection since you use the ddts-100 is digital so you use a coaxial or optical cable and the maximum speakers that can play with digital signal are 6.1.
    If you want to use all of you speakers you have to connect the 4:3 cable.You can connect it directly from your soundcard to your speakers or through the cable divider .
    Now if you're using the 4:3 cable check in Creative Audio Console that you check 7.1 option.
    I hope I helped you.
    http://forums.creative.com/creativel...ply_to_id=846#
    Preview Post

  • New Monitor Canopus 100 Not Working in iMovie 06

    My Element Electronics Monitor stopped working. I hooked up my Vizio TV to my computer and it works fine. I can get either TV, Computer, VCR etc. I used to be able to attach my Canopus ADVC100 to the monitor and I could watch TV thru iMovie. The monitor and computer recognized anything I had attached to the Canopus as a camera device ie DVD, VCR camcorder or tv. Now I cant do that thru canopus. Anybody have any ideas. I am thinking I need a monitor and not a TV.

    Not easy to figure out what this has to do with iMovie 6.
    I am thinking I need a monitor and not a TV
    That about covers it.

  • Casio CDP 100 not working

    I bought a Casio CDP 100 and a MIDI to USB cable. I cannot seem to get my computer to recognize the keyboard. Can someone walk me through how to set it up? I need to do this for Garageband but more importantly, Reason 3.0

    trying to figure out how I can get my Casio CDP to send signal into my Logic Pro
    Here's something you could try. (These instructions are basically for 10.6; in 10.5 it's similar.) Find this program:
    Macintosh HD/Applications/Utilities/Audio MIDI Setup
    Launch it. Use the Window menu to show and view the MIDI window (which is probably called "MIDI Studio"). It should look something like this (this screenshot is from 10.5; in 10.6 it's similar):
    You should see that icon marked Mbox 2. Do you?

  • OK Google does not work always/seldom

    Hello,
    just received my new Z3 - brilliant...... Only one issue
    I cant get "OK Google" to work properly.
    Firstly , Voice commands work perfectly if I press the microfone Icon or the google (now) bar and then speak.
    But then I tried to get OK GOOGLE running from any screen , so activationg voice commands without having to press the icon or the google bar....
    I switched language to english, and then I have to say OK Google three times so that it learns my voice.
    Already here the issue starts - it took me 20 trys or more so that it accpted the three times OK Google.
    Then everything seems to be set , but the phone only recognizes when I say OK Google sometimes, mostly not.
    When it recognizes it then it seem to work 2,3 times and then 10 times not .
    I tried in totally quiet surrounding enviroment and no matter how loud I shout OK google or not it only recognizes it after 5-10 tries sometime not at all. And sometimes , very rarely it works again.
    I have resetted all and setup/trained the voice again already 10 times - NO difference....
    The microfone itself of the phone is working fine in all other apps/phone ....
    Thanks for any hints

    Hi!
    I have a same problem with settings the voice searching system. But I can't turn on the button which name "From any screen". When I try to turn ON it, I get only white screen and nothing to do anymore. I was changed a language of the system, but it's nothing changed.
    Version of my system:
    Android 4.4.4
    Model C6603
    Build number 10.5.1.A.0.292
    You can see in attached screenshots what happend...

  • JButton Not Working Always

    I am having a problem with JButtons and JCheckBoxes in java. I am finding myself having to click the JButtons more than once in some situations to get to the next stage of my GUI. With the JCheckBoxes it sometimes takes a couple of clicks to change the state (unticked -> ticked). This seems to be occurring more than often. Can anyone help?

    If there are clicking problems, it's coming from the computer you're on, not java. There isn't much you can do about that

Maybe you are looking for