Friends need help desperate-- Second page not printing from the beginning

Hi Friends,
I have a large layout whose main-section is 8.5x20 (Width&height) which has 2 frames each having 2 repeating frames and about 20 fields in each repeating frame. When I run the report it shows the report right, but when I print, it prints only the first half since the report is long. When I change the property of the second frame of 'Page break before' to 'yes' it prints the second frame on the second page but print it at the same position as it printed on the first, and top of second page is all blank. How do I make to print from the beginning of the second page. Need your help.
Thanks
Joe.

Hello,
Most of the times, these problem are solved by "enclosing" the "Repeating frames" in frames with "Vertical Eleasticity" set to "Variable"
Regards

Similar Messages

  • My new Officejet Pro 8500a on a Windows XP machine will not print from the Internet.

    I just purchased and installed an Officejet Pro 8500a all-in-one and everything seems to work fine except that the maachine will not print from the internet.  I use Windows XP home and and the Firefox browser.  The printer is connected directly to the computer, and is not directly connected to the Internet or any other network.

    The Officejet 8500 printers take individual ink cartridges (IIC); that machine requires that all cartridges be installed to ensure that the printhead does not get damaged. Ink is used in the printer not just for printing, but maintain the printer and the printhead. One can reduce the amount of color ink the printer uses by changing the printer settings to Grayscale or use black ink only. Page 34 of the user manual shows how one can change those settings when printing documents. For further information on how ink is used in the printer; one can look as this page here where it goes into detail on the different ways that ink is used in the printer.
    I would just replace the color cartridge that the printer indicates needs replacing when the machine alerts you to low ink. I would not replace all colors at once when only one is in need of replacing.  
    I hope that this helps.
    I am a former employee of HP...
    How do I give Kudos?| How do I mark a post as Solved?

  • How do I get a numbers spread sheet to open where I left it and not start from the beginning every time I open it?

    How do I get a numbers spread sheet to open where I left it and not start from the beginning every time I open it?

    There is no built-in setting for redirecting a bookmark to a new tab.
    Is it possible that the computer which does that has an add-on such as the Tab Mix Plus extension installed? TMP has a setting for that (Events > Tab Opening).
    https://addons.mozilla.org/firefox/addon/tab-mix-plus/

  • TA44551 ipod battery is not charged from the beginning, what i must do now

    ipod battery is not charged from the beginning, what i must do now

    What do you mean by your iPod is not charged from the beginning?  What have you done so far in terms of troubleshooting the issue?  Tried a different cable or USB port or wall adapter?  How old is the iPod?
    B-rock

  • Photosmart B010a All In One test print O: K: Does not print from the computer

    Egr: Sig. No error message in the control panel is READY, has printed the test. DO NOT print from your computer. HP Computer in 6220 with window 7/64 bit. = tiscali WI Fi network. the printer is connected with the cable to the computer. I also tried with Doctor. Please help me figure out where I went wrong; I installed the latest type of software and drivers available. Thank you, Regards Costanzo 
    photosmart All In One B010a  stampa di prova O:K: non stampa dal computer
    Egr: Sig. Nessun messaggio di errore nel pannello di controllo risulta PRONTA , ha stampato la prova. NON stampa dal computer. Computer HP a 6220 con window 7 /64 bit. rete = tiscali WI Fi . la stampante è collegata con il cavo al computer . Ho provato anche con  Doctor . Per favore aiutatemi a capire dove ho sbagliato  ; ho installato l'ultimo tipo di software e driver disponibile . Grazie, Distinti Saluti Costanzo 
    This question was solved.
    View Solution.

    try to connect the printer with your laptop with USB connection.
    Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
    Click "Accept as Solution" if it solved your problem, so others can find it.
    I work on behalf of HP.

  • HP Office Jet Pro 8600 Plus. Will not print from the internet

    Hello all 
    Today my printer decided to 'throw' up a blank page ontop of the internet page I was trying to print.
    I asked the printer to print from the right hand mouse button drop down menu, then, 'print'.
    Then the white page pops up . You can see the internet around the edges. 
    The printer will print my own docs and photos. 
    Maybe I altered something in the settings this morning but I can't remember what I did?
    Has anyone any ideas? I do hope so . Thank-You Redocean
    This question was solved.
    View Solution.

    Hi @Redocean
    What Browser are you using? Can you try another Browser and let me know if you can print properly please?
    I look forward to hearing from you and working towards a solution.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Playbook requires me to pay for support when it did not work from the beginning and they could not fix.

    lack of email app- makes this may purchase virtually useless. because
    cant bridge with my bb 9700. maybe twice after deleting from both, and rebridging, i got connections. i cant spend an hour bridging every time. since may this is unfixable. the support people cant fix it after dozens of hours. got lots.of emails from them though. asking if i was resolved. when i answered no, they asked me to do it all again. they have no fix for this.
    can type documents, but cant email them to anybody. same with excel. no way to attach documents when the bridge doesnt work.
    i am a ceo,and i am moving my entire organization off bb becuase of this.
    have spent many many hours from the beginning in may, and now they want me to pay a 129 dollar fee to get support when it has not worked right from the beginning.
    i bought an ipad today and i am absolutely blown away by how much better it is in every single way. dozens of bbs are going away now.
    slow, no.email, locks up all the time, stand by button restarts tablet, no bridging without total reload on both devices. why would i go through this anymore? it is costing my business a fortune with myself and my people trying to make the playbook work.
    we will get ipads and make more money.
    i have tried to stay loyal to bb, but after being told i have to pay for support
    when i did once get a connection through bridge, reply locked up everytime on an email. could not type.

    I would like to add my support to this comment.
    Strike 1) Bridging a BB 9700 with a PB is flaky at best. Even if you run the very latest software on both, it does not work properly. This is NOT a user issue but a programme/application issue. RIM software running on RIM hardware and O/S and NOT being able to connect properly = RIM fault.(see my other post: My Bridge connects, it exchanges data like passwords, number of unread emails and my playbook notifies me when someone calls my BB, but it does NOT unlock)
    Strike 2) All this used to work fine during the 90d grace suport period (apart from the flaky bluetooth issue that required a hard reboot of the BB whenever the connection was broken in a bad way)
    Strike 3) Now, after a PB OS upgrade (which I faithfully applied), several phone upgrades (due to another problem) and the latest Bridge application install, it all doesn't work anymore, 100 days after I bought the flipping thing. so I have a fancy ebook reader, not the productivity enhancing tool I can use on the go.
    So now I am stuck with a forum that can't help, a technical database that does not contain this support information and a broken RIM application on RIM Hardware and O/S that I paid a lot of money for. And now they want more to look at this incident????? I am sorry but if this was a problem caused by usage, configuration or any other user error, I could understand it. But this is all completely in RIMs ballpark. I have done everything right. It connects. It just DOES NOT WORK!!!!!
    As I said in my other post, an evaluation of the PB in my company is ongoing as a possible management tool by people I know quite well, as I work in the area, but my advice would definitely be to stay away until basic functionality like emails, attachments, calendars etcetera are all suitably solved and usable by the average manager with sausage fingers and no clue about bluetooth, hard reboots and who won't be able to hold down the power, + & - buttons at the same time as the fingers won't fit!!
    So RIM, get your finger out, open up an email support channel or get some qualified support people go through this forum and help those people who have shown faith in your products and who now have real problems with your software and hardware. DONT HIDE BEHIND A STUPID SUPPORT FEE - MAN UP TO YOUR PROBLEMS!!!

  • Second page not printing on EPSON dot matrix

    Hi Experts,
    I have created a Smart Form which has 2 pages. I am able to see the Print Preview correctly of 2 pages, (Spool also shows correctly),  but when I give the print on EPSON DOT MATRIX PRINTER, only one page is getting printed. Somewhere it seems that second page is getting overlapped on the first page. Its very strange behieveour. Dont know why its happening.
    Any ideas ??

    I have done it. Well issue was:  \f command needs to be used when you create the custom page in the device type--->formats->your custom page----End of page.
    In end of page simply write \f and printer will stop over writing the pages
    Thanks.

  • Time Capsule:  Need help accessing my video surveillance DVR from the Internet.

    I am using the latest 4th Generation Time Capsule attached to a DSL Modem.  My 4 video Survilance DVR is connected to a switch then to the Time Capsule.  How or what is needed to be able to access the DVR via the internet.  I am able to access the DVR from within the home network only.  Would appreciate some guidance.
    Thanks in advance.

    Is the modem bridged?
    If not and working in router mode then the TC should be bridged.. this will never work if you have double NAT.
    Whichever box is the main router will need to forward the required ports for the camera dvr.. does the software use port 80 ie html?? That means you just forward port 80 to the IP address of the dvr. But find out the port.. the dvr instructions should tell you. Port forwarding on the TC.. ain't hard.. just google for the instructions. If the dsl modem is router, read its manual.
    You will need to lock the ip of the dvr so it doesn't shift. Do that in the router if possible but I am not sure you can on the TC. You will need to do it on the device using a static ip.
    The other thing is public IP .. do you have a static public address.. if not you will need to run dyndns. this is not available in the TC.. as most things are not available. So you will also need to check the dvr remote access instructions as it might have a dyndns client.. or you will have to use dsl modem as router even if you currently bridge it.
    Sorry this is making it complicated.
    Give some feedback and we can go from there.
    What is the main router?
    What modem is it exactly?
    What make and model is the DVR? A URL to the pdf manual will help if it gets complicated.
    What port do you use to access the DVR?
    Is there a dyndns client in the dvr?

  • 404 Page Not Found from the Page Definition

    Version 1.6
    I'm trying to run my app by clicking on the stop light on the Page Definition screen and I'm now getting a 404 Page Not Found error. There is NO entry in the Apache Error log, however, there is an entry in the Access log which is:
    htmldb_public_user [03/Oct/2005:15:02:52 -0500] "GET /pls/htmldb/f?p=110:1:4702644663970887147::::: HTTP/1.1" 404 326
    Obviously, the 404 is the Page Not Found code, but what is the 326?
    Can someone help with this?
    Thanks,
    Joe

    Sorry forgot to add back the details.
    Note: 295550.1 Says its still around in 10.1.0.3 but not 10gR2.
    Symptoms
    After ugrading database to 9.2.0.6 : GET /pls/htmldb/wwv_flow.accept HTTP-404 ORA-06502
    WHEN CONNECTING TO HTMLDB
    Cause
    This problem was reported in Bug 4015165 10.1.0.3 PLSQL 10.1.2.0.0 PRODID-11 PORTID-453
    Abstract: REGRN:SCALAR VARCHAR2 IN BINDS WITH DIFFERENT SIZE RANDOMLY FAILS WITH ORA-6502
    Solution
    Install the following patch from metalink Patch 4015165.

  • I have a HP Photosmart Premium 309 and it will not print from the computer says not online,

    disconnected usb and power and re connected, but still not printing, just says offline. can anyone help please

    hi there,
    could you provide the community with a little more information to help narrow troubleshooting? what operating system?
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • HP PSC 1350 Series Printer will NOT print from the internet ~ but will print a word document.

    I have an HP PSC all-in-one PSC 1350 Series printer.
    the operating system is Windows XP to the computer it's USB connected to.  
    Earlier this week I was having troubles with the WIFI and IT helpers changed setting on the modem and the router. 
    Still wouldn't work, so a new router is being sent to me.
    To use the internet, I currently have the ethernet cord directed connected to the computer. 
    These past few days the printer worked both printing word documents AND print jobs from the internet.
    NOW IT WILL PRINT NOTHING FROM THE INTERNET.  (ex: email messages, invoices, statements etc)
    I've tried again after restarting the computer, unplugging and restarting the printer and still it won't work.
    The tiny printer icon appears briefly in the bottom tool bar, acting like it wants to print, but then nothing happens.
    Please advise. 

    Hi there,
    Try downloading and running the print and scan doctor located here:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&lc=en
    It can fix a lot on its own and if not give a better idea of what is going on.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • Iphone 4 ringtones not playing from the beginning

    i've updated both my iphone 4 software to the latest one(4.1) and itunes to 10.0.1,
    few days before the ringtones were fine, in which i mean ALL ringtones were playing from 0.00s(the very beginning) and everything was fine.
    but then since yesterday, the ringtones/alarms simply start from the MIDDLE of the every ringtone, even the one installed by Apple. whenever the alarm repeated as i'm not switching it off immediately it silenced for a few seconds and again playing the ringtone from the MIDDLE.
    i checked everything in my itunes/iphone/ringtones and nothing goes wrong.
    is there anyone encountering the same problem here and what can i do?=(

    hello can anyone help????=(

  • Songs are not playing from the beginning of the track

    When using the shuffle feature on iTunes some of the songs songs that are played do not begin from the start of the track.
    Others start fine, I have no idea why this should be the case.
    Can anyone please advise?
    Thanks

    There is not a fix that I am aware of.
    It is happening to me with synced content of various types-tv shows, movies and podcasts.
    Let Apple know about it here:
    http://www.apple.com/feedback/iphone.html

  • Catalyst - HELP with one page not showing in the design window.

    When using Catalyst, I can only see the html on one of my pages. The design tab is showing a blank page. Does anyone know how to fix this?

    You can setup a page branch that responds to your specific button and within that branch definition you can specify page items and values to be set when that branch fires.
    Is there a specific reason that you want the values passed on the URL? That's not really required to make ApEx function properly.
    Earl

Maybe you are looking for