TA44551 ipod battery is not charged from the beginning, what i must do now

ipod battery is not charged from the beginning, what i must do now

What do you mean by your iPod is not charged from the beginning?  What have you done so far in terms of troubleshooting the issue?  Tried a different cable or USB port or wall adapter?  How old is the iPod?
B-rock

Similar Messages

  • Battery does not charge from the iPhone charger

    i have same problem with my iphone 4 and the etisalat provide me with new iphone 4 within same day i find also the new iphone have same problem it take me more than a month for replacement and now i start again to make complain and i do not know how long with take to replace the i pphone i ask the apple to request from etisalat to speed the process to replace i like apple products i phone , ipad,ipod... i hope you can help me to keep your product number one in uae market

    Try rebooting the iPhone, hold both the power and home buttons until the apple logo appears and it restarts, ignoring the red slider if it appears.
    The iPhone 5 should charge from the iPad charger, doing the reverse doesn't work, however.
    Leave it on the charger for a couple hours and if it still does not indicate increased battery charge, take it to an Apple store genius bar and have it checked.

  • My iphone 4 will not charge from the outlet have to charge it from my computer

    my iphone 4 will not charge from the outlet have to charge it from my computer

    Try another outlet to make sure that isn't the issue. If it still doesn't work you will need to replace your charger.

  • My iPad will not charge from the wall outlet or the USB.  I also used three different chargers, as well as rebooting my iPad several times.

    My iPad will not charge from the wall outlet or the USB.  I also used three different chargers, as well as rebooting my iPad several times.

    Then it's time to make an appointment at your Apple Genius Bar at your Apple Store.  Apple will check it out and if it's defective and still in waranty (you don't say which model you have), it will be replaced.

  • My ipod video is not recognized by the computer what should i do/

    my ipod video is not recognized by the computer what should i do?

    What have you tried so far in terms of troubleshooting this issue?  Are you plugging the iPod into a high powered USB 2.0 port on the back of your PC? Have you tried a different USB cable?
    What happens if you try to reset the device with it still connected to the PC?
    How to reset iPod
    Has this iPod ever worked on this PC or is this the first time you have time you have tried connecting it?
    Have you carefully worked through each and every single suggestion in this Apple support document?
    iPod not recognized in 'My Computer' and in iTunes for Windows
    B-rock

  • How do I get a numbers spread sheet to open where I left it and not start from the beginning every time I open it?

    How do I get a numbers spread sheet to open where I left it and not start from the beginning every time I open it?

    There is no built-in setting for redirecting a bookmark to a new tab.
    Is it possible that the computer which does that has an add-on such as the Tab Mix Plus extension installed? TMP has a setting for that (Events > Tab Opening).
    https://addons.mozilla.org/firefox/addon/tab-mix-plus/

  • Battery does not charge all the way .  How do I fix this?

    My battery will not charge overnight.  I've had it to the Apple Store and they worked on it for a couple of hours, backing up data and then resetting the iPad.  This seemed to help for a couple of days, but then it started doing the same thing.  It's still under the extended warranty, but when I call in, tech support tells me that they can see that the battery is fine.  How do I fix this?

    Hello karen1944,
    I think in this situation based off the previous troubleshooting that we need to start isolating the issue to either hardware or software. What I recommend doing is restoring the iPad as a new device, and NOT restoring your backed up data to it for a while. This article named iOS: How to back up your data and set up as a new device found here http://support.apple.com/kb/HT4137 shows how to do that. Start at step 2, and make a current backup of your device to iTunes.
    2. Back up
    Back up your device before you erase it. Review the steps below, depending on your backup method, to ensure that you have a recent backup in case you decide to restore your device from a backup
    iTunes
    iTunes backs up your device automatically when you sync. If you have previous backups of your device in iTunes when you select Set Up As New, a sync occurs. This sync creates a new backup indicating the time the device was backed up.
    To back up your device:
    In iTunes, check Preferences > Devices to check the date and time of your latest backup.
    If you do not have a recent backup, create one by right-clicking the device in the source list and choosing Back Up.
    For more information on backing up your device, see iOS: How to back up. If you wish to copy your backup to another folder, disk, or location for safekeeping, see this article in the section titled "Where iTunes backups are stored on your computer." For more information about what iTunes backs up, see this article.
    That way you can monitor the device and see if the issue re appears or not. If it does not re appear within a few days, then you should restore your data from the iTunes backup using that same article, at the bottom there is a section about restoring from an iTunes backup:
    To restore your device using a previous backup
    iTunes
    To restore your device using a previous backup, connect your device to iTunes. When your device appears in the source list, right-click your device and click "Restore from backup…".  iTunes will ask you to choose the desired backup from the list provided.
    All the best,
    Sterling

  • Macbook Pro battery is not charging but the battery meter is full

    Hi guys!
    I have a 19 months macbook pro. I've tried using 2 different AC adapter but my mac's battery is still at 0% and the status says "Battery is not charging". I think my battery is dead but the LED battery indicator on my battery shows 5 lights, means its at full power.
    I've tried to disconnect the AC cable and remove the battery, then press the power button for 10 sec but nothing change when i start my mac again...i also tried to reset my PRAM ( i think ) by holding a cmdopt+PR while rebooting but it didn't help to solve the problem too. I also have the battery update 1.2 installed on my mac and the results is still the same.
    This is my battery info from system profiler. I hope someone can tell me what to do before I visit the Apple store.
    Battery Information:
    Model Information:
    Serial Number: SMP-ASMB014-3658-b12
    Manufacturer: SMP
    Device name: ASMB014
    Pack Lot Code: 0001
    PCB Lot Code: 0000
    Firmware Version: 0102
    Hardware Revision: 0202
    Cell Revision: 0100
    Charge Information:
    Charge remaining (mAh): 0
    Fully charged: Yes
    Charging: No
    Full charge capacity (mAh): 0
    Health Information:
    Cycle count: 298
    Condition: Check battery
    Battery Installed: Yes
    Amperage (mA): 0
    Voltage (mV): 12528
    System Power Settings:
    AC Power:
    System Sleep Timer (Minutes): 10
    Disk Sleep Timer (Minutes): 10
    Display Sleep Timer (Minutes): 10
    Automatic Restart On Power Loss: No
    Wake On AC Change: No
    Wake On Clamshell Open: Yes
    Wake On LAN: Yes
    Display Sleep Uses Dim: Yes
    Battery Power:
    System Sleep Timer (Minutes): 15
    Disk Sleep Timer (Minutes): 10
    Display Sleep Timer (Minutes): 5
    Wake On AC Change: No
    Wake On Clamshell Open: Yes
    Display Sleep Uses Dim: Yes
    Reduce Brightness: Yes
    Hardware Configuration:
    UPS Installed: No
    AC Charger Information:
    Connected: Yes
    Charging: No

    Hello,
    I am having some strange battery behavior. I bought a FastMac TruePower Battery that is supposed to have extended capacity. Now when the battery dies, i plug in my MagSafe to charge it and it immediately says 'not charging', but then begins to charge. It either continues to charge and gets stuck at 80% or so and reads "calculating" in the menu bar, or just jumps between 'charging' and 'not charging'. The symptoms are very strange, and FastMac already sent this battery back saying it passes all of their tests. I do not want to send it back again because they charged me to send it back to myself even though it still does not work as advertised. I have my original Macbook Pro Apple battery which still charges fine, so i assume it is a problem with the battery based on a simple process of elimination.
    Battery Information:
    Model Information:
    Serial Number: BIT-ASMB012-***-* <Edited by Moderator>
    Manufacturer: BIT
    Device name: ASMB012
    Pack Lot Code: 012d
    PCB Lot Code: 050d
    Firmware Version: 647e
    Hardware Revision: 2700
    Cell Revision: 0000
    Charge Information:
    Charge remaining (mAh): 2116
    Fully charged: No
    Charging: No
    Full charge capacity (mAh): 5029
    Health Information:
    Cycle count: 24
    Condition: Good
    Battery Installed: Yes
    Amperage (mA): 2628
    Voltage (mV): 11962

  • HT1384 iPod Classic will not charge from wall outlet

    My iPod Classic 80G will charge from my computers and my iHome dock, but not from the wall outlet. The cord, outlet, and adapter all work. We know the regular adapter works, it's an Apple universal USB to wall adapter that charges our iPad. We tried other cords (have two), other outlets, and even my kindle 2-prong adapter. Nothing worked. Suggestions?

    Hello there, Anhaja.
    First off, great job in your isolating steps performed already. One step that wasn't mentioned is found in the following Knowledge Base article:
    How to reset iPod
    http://support.apple.com/kb/HT1320
    For your particular model:
    How to reset an iPod with a Click Wheel
    1. Toggle the Hold switch on and off. (Slide it to Hold, then turn it off again.)
    2. Press and hold the Menu and Center (Select) buttons simultaneously until the Apple logo appears, about 6 to 8 seconds. You may need to repeat this step.
    Tip: If you are having difficulty resetting your iPod, set it on a flat surface. Make sure the finger pressing the Select button is not touching any part of the click wheel. Also make sure that you are pressing the Menu button toward the outside of the click wheel, and not near the center.
    If the above steps did not work, try connecting iPod to a power adapter and plug the power adapter into an electrical outlet, or connect iPod to your computer. Make sure the computer is turned on and isn't set to go to sleep. Try resetting the iPod while it is connected to power.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Why is my iPhone 5 not charging From the wall outlet ?

    WHy is my iPhone  5 won't charge from the wall outlet , what do I need to do ?

    Is the Wall Outlet Turned On...

  • Some songs starts on my iPod, then stop and start from the begining and play all the way through

    Hey,
    While listening to songs on my iPod Classic 120gb, some songs will start to play, after 2-3 seconds, stop and start again from the beginning and play through the entire song no problems. On iTunes the songs still plays fine no stopping or starting. All songs are random artists and songs.
    Help! its really frustrating!

    Hey andy8299,
    Do you have any other music software (i.e Limewire) installed? If so perhaps these files are not compatible.
    See this for compatible song formats:
    http://docs.info.apple.com/article.html?artnum=61476
    Hope this helps,
    Generik

  • Why does my iPod app keep starting over from the beginning??

    I have noticed lately that my iPod app seems to start over and play ALL songs on my phone from the beginning nearly every time I plug my phone into my car stereo.
    I plug my phone into my car stereo and listen every day on my work commute. As such, it's very important that the music stay on the same position between the times when I'm in my car. For the most part it's been fine, even on 4.0.1, unless I rebooted the phone or did a spring board respring, or otherwise killed the iPod app from the multitask app list.
    However this past week, it's been starting over from the beginning (I was playing songs from a playlist and it starts over from the beginning of ALL songs) nearly every single time I connect it to my car stereo. I have not been listening to the music between times in the car, nor have I even opened the iPod app or killed the process from the multitask bar.
    This is absolutely maddening. No changes have been made to the phone in the past couple of months, other than a few App Store app updates here and there. This just started really being a problem in the past week. What could be causing this?
    Message was edited by: PatrickGSR94

    Dont have that problem but i have two tips:
    1 Other ipod/iphone apps: they are often the problem, i had an alarm clock and that blocked the whole ipod app, so check if other apps dont use songs to wake up or anything else..
    2 try to leave the ipod app trough the multitasking instead of pressing the home button?
    Greets mathieu

  • Playbook requires me to pay for support when it did not work from the beginning and they could not fix.

    lack of email app- makes this may purchase virtually useless. because
    cant bridge with my bb 9700. maybe twice after deleting from both, and rebridging, i got connections. i cant spend an hour bridging every time. since may this is unfixable. the support people cant fix it after dozens of hours. got lots.of emails from them though. asking if i was resolved. when i answered no, they asked me to do it all again. they have no fix for this.
    can type documents, but cant email them to anybody. same with excel. no way to attach documents when the bridge doesnt work.
    i am a ceo,and i am moving my entire organization off bb becuase of this.
    have spent many many hours from the beginning in may, and now they want me to pay a 129 dollar fee to get support when it has not worked right from the beginning.
    i bought an ipad today and i am absolutely blown away by how much better it is in every single way. dozens of bbs are going away now.
    slow, no.email, locks up all the time, stand by button restarts tablet, no bridging without total reload on both devices. why would i go through this anymore? it is costing my business a fortune with myself and my people trying to make the playbook work.
    we will get ipads and make more money.
    i have tried to stay loyal to bb, but after being told i have to pay for support
    when i did once get a connection through bridge, reply locked up everytime on an email. could not type.

    I would like to add my support to this comment.
    Strike 1) Bridging a BB 9700 with a PB is flaky at best. Even if you run the very latest software on both, it does not work properly. This is NOT a user issue but a programme/application issue. RIM software running on RIM hardware and O/S and NOT being able to connect properly = RIM fault.(see my other post: My Bridge connects, it exchanges data like passwords, number of unread emails and my playbook notifies me when someone calls my BB, but it does NOT unlock)
    Strike 2) All this used to work fine during the 90d grace suport period (apart from the flaky bluetooth issue that required a hard reboot of the BB whenever the connection was broken in a bad way)
    Strike 3) Now, after a PB OS upgrade (which I faithfully applied), several phone upgrades (due to another problem) and the latest Bridge application install, it all doesn't work anymore, 100 days after I bought the flipping thing. so I have a fancy ebook reader, not the productivity enhancing tool I can use on the go.
    So now I am stuck with a forum that can't help, a technical database that does not contain this support information and a broken RIM application on RIM Hardware and O/S that I paid a lot of money for. And now they want more to look at this incident????? I am sorry but if this was a problem caused by usage, configuration or any other user error, I could understand it. But this is all completely in RIMs ballpark. I have done everything right. It connects. It just DOES NOT WORK!!!!!
    As I said in my other post, an evaluation of the PB in my company is ongoing as a possible management tool by people I know quite well, as I work in the area, but my advice would definitely be to stay away until basic functionality like emails, attachments, calendars etcetera are all suitably solved and usable by the average manager with sausage fingers and no clue about bluetooth, hard reboots and who won't be able to hold down the power, + & - buttons at the same time as the fingers won't fit!!
    So RIM, get your finger out, open up an email support channel or get some qualified support people go through this forum and help those people who have shown faith in your products and who now have real problems with your software and hardware. DONT HIDE BEHIND A STUPID SUPPORT FEE - MAN UP TO YOUR PROBLEMS!!!

  • Friends need help desperate-- Second page not printing from the beginning

    Hi Friends,
    I have a large layout whose main-section is 8.5x20 (Width&height) which has 2 frames each having 2 repeating frames and about 20 fields in each repeating frame. When I run the report it shows the report right, but when I print, it prints only the first half since the report is long. When I change the property of the second frame of 'Page break before' to 'yes' it prints the second frame on the second page but print it at the same position as it printed on the first, and top of second page is all blank. How do I make to print from the beginning of the second page. Need your help.
    Thanks
    Joe.

    Hello,
    Most of the times, these problem are solved by "enclosing" the "Repeating frames" in frames with "Vertical Eleasticity" set to "Variable"
    Regards

  • My macbook pro was defective from the beginning. what to do?

    I bought my macbook pro about 4 yrs ago in my college year, and right after I found out there was some weird noise being made while the laptop was running.
    And compared to my school mates' macbook, mine got easily heated up and had a loud noise while running.
    So I took it to my school tech department and they said since its warranty is effective, why don't I go to apples, and so I did.
    At first, at the genius bar, a technician said it will cost me 400 and i was struck with shock ..
    fortunately, the technician found out that the laptop was defectively manufactured from the factory from the beginning and I was free of the fixing charge.
    However, my macbook pro's got a new problem. The screen goes black while running. I can hear the computer running but the screen is total pitch black.
    I went to apple store again to the genius bar to ask for the fixing fee.- It was 300 bucks for fixing it and they said there was a problem with
    the computer's logic board whatever. I bought the laptop for 1200$ and they are asking me for 1/4 of the price the laptop.
    The genius bar asked me if I ever dropped the laptop or left it somewhere near water whatever. I HAVE NEVER DONE THAT and the laptop was
    sitting on my loveseat in my room and when I came back from work and turned it on to get on internet...it didn't turn on.
    What am I supposed to do?
    I am so upset bc I have a paper to turn in for the beginning fo the next month, but since I can't afford to fix the computer, I am totally at a loss.
    I bought the laptop at Bestbuy when there was the event going on, which if you buy a mac, it comes with an ipod 2nd gen.
    When I bought it, there was a lil scratch like thin on top of the cover of the laptop, but I just thought like
    it will get a scratch while using it anyway and i just let it go and I bought a cute plastic cover for that laptop.
    If I knew that that was something like a defective product, I wouldn't have bought it or exchanged it with a new one.
    Where do I complain about this? whom do I talk to? why does apple distribute defective products to customers and make us to pay so much money to fix it after the warranty is done?
    Apple should be responsible for this.
    For someone like me, who's a poor student who can't get anymoney from anywhere (I am being supported by my church), what am I supposed to do?
    I want a responsible answer from Apple.
    or if anyone knows how I should deal with this, please answer me.
    I am really at a loss and desperate due to my financial situation. Thank you.

    I had a very similar issue.  I am not sure which machine you have.  I purchased 2 MacBook Pro's mid 2010 2.66ghz.  One is dead the other failing.  I am with you, you shouldn't have to purchase an extended warranty on a premium product.  I have seen a lot of posts on this subject.  Seattle Rex took Apple to court last year over the same issue and won in small claims court.
    http://www.seattlerex.com/seattle-rex-vs-apple-the-verdict-is-in/
    I am sure a class action lawsuit is not far off.  It is fraudulent to sell a product that is known to be defective.  I purchased my laptops from Apple.com in 2011 after the testing program had already started.  From what I can deduce the logicboard and Lion do not get along.  CNET has several articles on this issue.  Here is the notice from Apple that is very hard to find.
    http://support.apple.com/kb/TS4088
    Here is an article from CNET
    http://reviews.cnet.com/8301-13727_7-57586703-263/graphics-related-crashes-resur face-for-mid-2010-macbook-pro-systems/
    Maverick is supposed to help but for me that is a day late and $4000 dollars short. 
    If you do bring your laptop in, print out the notice.  The guys and gals at the Genius Bar will not know about this issue.  They tried to sell me a new MLB too as well as trying to wipe my hard drive.  Good luck, I hope this helps.

Maybe you are looking for

  • Which files can I safely delete in my Pictures Folder/ iPhoto Library

    Hello Thanks in advance for any advice on the following. I am trying to free up some space on my Macbook Pro hard drive. In the Pictures/ iPhoto Library folder, I seem to have a lot of duplicates. At this folder level, I have series of sub folders wi

  • How to find the user ID who has deleted the Cycle count document?

    I am interested in knowing how we can know the User ID who has deleted the Inventory Cycle count document deleted using LI02N. I have checked the table LINV and also in the storage bin Inventory data. But in storage bin inventory data only counter na

  • Custom field in General data of Travel request

    Hi All, I need to add a custom field in the General data section of the travel request screen.The requirement is such that if user creates an expense report corresponding to that travel request then the same field with the value should appear.Can any

  • Software simulation

    What elearning software would work best to simulate a software product. I would like to allow someone to perform an activity just as though they were actually using the product. This would only be to a limited extent, to accomplish a certain task, no

  • How to get a video file details?

    Hi guys, I need to create a simple applet. User loads a video file (.avi, .rmvb, .mpg, .mkv) form hdd with FileChooser and applet should read its: - fps - length - size - resolution - codec Something like application called TellMeAboutDivx but applet