From clause while destype=mail

Hello
i am using developer 10g. I am calling a report from a form. I have changed the value of destype=mail. it's working fine, but it's showing from as an empty to recipient. I want to pass the value for from(sender's email address). i am using RUN_REPORT_OBJECT method. is there any way to define the value for sender's email address via SET_REPORT_OBJECT_PROPERTY.
thanks

Hello,
You can use a line like :
set_report_object_property(repid, report_other, 'from=[email protected]');
Regards

Similar Messages

Error while sending mail from SAP

Hello All,
Recently we are facing an error while sending mail from SAP. When we try to compose a message ,it is moving to a dump error RAISE_EXCEPTION.
The details from ST22,
Short text
    Exception condition "FOLDER_NOT_EXIST" raised.
Error analysis
    A RAISE statement in the program "SA
    condition "FOLDER_NOT_EXIST".
    Since the exception was not intercep
    program, processing was terminated.
Kindly suggest..
Thank You,
Regards,
Hasan

Hello Priyanka,
Actually, I performed the following two steps in order to solve the issue:
- In transaction SICF, the node for SAPConnect must be active. In our system, this node was in inactive state. Hence I activated it.
- Then In transaction SCOT-> Settings menu--> default domain should be 'xyz.com' if the email addresses in your company are maintained with a suffix xyz.com.
But for me the problem didnt get solved here..
The problem that i am facing now is that if in my user profile, I have the email address maintained, then i get an error saying 'Sender address rejected'. However, if i goto transaction SU01 and clear the email id, the mail is successfully sent to outer world.
You can try the above mentioned two steps using SICF and SCOT. If the problem does not get solved then try clearing the mail id in ur user profile.
Hope this helps. If you find an answer to the problem of the mail id getting cleared, then please let me know..
Regards,
Himanshu

How to use for all entires clause while fetching data from archived tables

How to use for all entires clause while fetching data from archived tables using the FM
/PBS/SELECT_INTO_TABLE' .
I need to fetch data from an Archived table for all the entries in an internal table.
Kindly provide some inputs for the same.
thanks n Regards
Ramesh

Hi Ramesh,
I have a query regarding accessing archived data through PBS.
I have archived SAP FI data ( Object FI_DOCUMNT) using SAP standard process through TCODE : SARA.
Now please tell me can I acees this archived data through the PBS add on FM : '/PBS/SELECT_INTO_TABLE'.
Do I need to do something else to access data archived through SAP standard process ot not ? If yes, then please tell me as I am not able to get the data using the above FM.
The call to the above FM is as follows :
CALL FUNCTION '/PBS/SELECT_INTO_TABLE'
EXPORTING
    archiv           = 'CFI'
    OPTION           = ''
    tabname          = 'BKPF'
    SCHL1_NAME       = 'BELNR'
    SCHL1_VON        = belnr-low
    SCHL1_BIS        = belnr-low
    SCHL2_NAME       = 'GJAHR'
    SCHL2_VON        = GJAHR-LOW
    SCHL2_BIS        = GJAHR-LOW
    SCHL3_NAME       = 'BUKRS'
    SCHL3_VON        = bukrs-low
    SCHL3_BIS        = bukrs-low
SCHL4_NAME       =
SCHL4_VON        =
SCHL4_BIS        =
    CLR_ITAB         = 'X'
MAX_ZAHL         =
tables
    i_tabelle        = t_bkpf
SCHL1_IN         =
SCHL2_IN         =
SCHL3_IN         =
SCHL4_IN         =
EXCEPTIONS
   EOF              = 1
   OTHERS           = 2
   OTHERS           = 3
It gives me the following error :
Index for table not supported ! BKPF BELNR.
Please help ASAP.
Thnaks and Regards
Gurpreet Singh

I can't send an e-mail from thunderbird, it was working well, suddenly it says the following message:An error occurred while sending mail. The mail server respo

i can't send an e-mail from thunderbird, it was working well though , suddenly it says the following message:An error occurred while sending mail. The mail server responded An error occurred while sending mail. The mail server responded: (Alis-MacBook-Air.local) [46.138.187.135]:51054 is currently not permitted
OR
i have changed the port from 587 to 465 but still cannot send e-mail, it keep sending and sending for 5 minutes and respond is time out?

Can you post your Troubleshooting Information?
Help (Alt-H) - Troubleshooting Information

Error while sending mail from SAP system

Hi all,
I configured SAP connect in ecc6.0 ehp7 while sending mail using tx sost i am error
Message cannot be transferred to node SMTP due to connection error (final) , below is the icm log.
ERROR => IcmPlAllocBuf: MpiGetOutbuf failed (rc = 14(MPI_ESTALE: outdated MPI handle)) [icxxplugin.c 1222]
ERROR => SMTP SmtpClientClose: alloc failed, rc = -3 [smtp_plg.c 3738]
ERROR => IcmBufFree(id=0/32): MpiFreeBuf failed (rc=14), MPI_ESTALE: outdated MPI handle [icxxplugin.c 165
ERROR => IcmConnClose: PlugInStopConn failed (rc=701) [icxxconn.c 3433]
can any one please help on this
Thanks,
Narendar.

Hello Priyanka,
Actually, I performed the following two steps in order to solve the issue:
- In transaction SICF, the node for SAPConnect must be active. In our system, this node was in inactive state. Hence I activated it.
- Then In transaction SCOT-> Settings menu--> default domain should be 'xyz.com' if the email addresses in your company are maintained with a suffix xyz.com.
But for me the problem didnt get solved here..
The problem that i am facing now is that if in my user profile, I have the email address maintained, then i get an error saying 'Sender address rejected'. However, if i goto transaction SU01 and clear the email id, the mail is successfully sent to outer world.
You can try the above mentioned two steps using SICF and SCOT. If the problem does not get solved then try clearing the mail id in ur user profile.
Hope this helps. If you find an answer to the problem of the mail id getting cleared, then please let me know..
Regards,
Himanshu

Using destype=mail in reports server

I am trying to send a report to an email address by using the following request string from IE 6.0:
http://[local machine name]:8888/reports/rwservlet?cmdkey=test_report+desformat=html+destype=mail+desname=[email protected]
The error I get is:
Error while sending mail - Sending failed;
nested exception is:
javax.mail.MessagingException: 553 5.1.8
<[username]@[local machine name]>... Domain of sender address [username]@[local machine name]... does not exist
The 9iAS reports server is running on my [local machine] (PC) and the config file myserver.conf has the following two tags included. The rwbuilder.conf file also includes these.
<notification id="mailNotify" class="oracle.reports.server.MailNotify">
<property name="succnotefile" value="succnote.txt"/>
<property name="failnotefile" value="failnote.txt"/>
</notification>
and
<pluginParam name="mailServer">servername.our-domain.com</pluginParam>
This report runs fine if destype is anything else like localfile or cache.
I would appreciate any help on this.
Regards,
Anupam

Some mail servers validate sender's email id. So please try by specifying
from=valid_email_id
in command line
Thanks
Ratheesh

Using destype=mail the smtp header options

Hi
We have used 6i reports for years and moved to 10g a while back.
I have just found out that the 10g reports can have a few more parameters passed to them to imprvoe the destype=mail options, i.e. to, from, replyto etc.
Does anyone have a list of these options.
Is there yet the ability to add body text to these emails
Thanks

Hello,
Yes, if you use the distribution :
http://download-uk.oracle.com/docs/cd/B14099_17/bi.1012/b14048/pbr_dist.htm#i1005830
<mail id="a1" to="[email protected]" subject="Results">
<body srcType="text">
Attached are quarterly results.
</body>
<attach srcType="report">
<include src="headerSection"/>
<include src="mainSection"/>
</attach>
</mail>
In this example , the Body text will be "Attached are quarterly results." and the Reports output will be attached to the email
Regards

Urgent:-REP-50152: Error while sending mail

hi
i am using reports10g. i have called a report from a form and destype=mail.
i have already mention the smtp server name in conf. file but still receiving this error
REP-50152: Error while sending mail - Sending failed; nested exception is: javax.mail.SendFailedException: Invalid Addresses; nested exception is: javax.mail.SendFailedException: 550 5.7.1 Unable to relay for [email protected]
thanks

Your smtp server forbids relaying, which is very common. Often a smtp server is configured to send only mails within the same domain without authentication. Otherwise, you need a username and password for the smtp server. I'm not sure if you can configure Reports to send mail through an authenticated server.

Re: exit from a while loop in sub vi

I think the mail didn`t get through first time. Repeat posting - Sorry if
this occurs twice
Shane
Hallo,
Can the use of occurrences solve this problem?
The Main program can create an occurrence which can be passed to the
sub-VIs. Upon pressing the button to cancel the loop, the occurrence can be
set, instantly transmitted to all other VIs sharing which were passed the
same occurrence. Of course a small handling routine has to be written (say
a sequence parallel to the executing while loop waiting for the occurrence
and then setting the exit parameter to "true") but this is trivial.
I have checked this with a small program splitting an occurrence to three
seperate VIs and it works.
If you want, I can send a cop
y of it.
It may well be possible with notifiers or something else, but I have far
less experience with them.
Hope this helps
Shane
>pcu schrieb in Nachricht
><[email protected]>...
>>Main vi has several sub-vi's. Each sub vi has a while loop and Boolean
>>button. When program runs, sub-vi front panel appears, and I can
>>stop/continue the while loop. But when I stopped a while loop in a
>>sub-vi, I cannot control other while loops in other sub vi.
>>I need exit function from a while loop, not stop function of entire
>>program.
>>Thanks.
>
>
Using LV 6.1 and 8.2.1 on W2k (SP4) and WXP (SP2)

The notifier is probably better than occurence at this case - than it is not neccessry to write a parallel sequence.
The use of notifier is very simple, just follow an example in Help/Search example -> Advances -> Execution control -- Synchronization -> SubVI notification.
Good luck
Ferda

Is it possible to keep an email account on the iPhone but stop if from checking for new mail?

I have an email account that has been deleted from the provider (Gmail), but I want to keep the old mails on my phone, while stopping it from checking for new mail. Is this possible?
If I disable the account to stop if from checking for new mail (and producing a bunch of annoying pop-ups every time the mail app is opened), the account becomes invisible and the old mails disappear. I want to keep them visible to I can read and refer to them, but want to stop the phone from trying to download new ones or check the account.
Any help appreciated.

Thanks for the thought. In this case, that doesn't really help much, as it requires a bunch of button pushing just to check emails. Plus, if I'm not mistaken, in addition to switching modes every time I check email, it also prevents the other accounts from downloading the most recent mails as well. Since it's possible to keep an account on a Mac computer, but take it offline, it's very disappointing if there isn't a way to do the equivalent on an iPhone so that it passively holds the mails but doesn't send constant pop-ups every time the app is accessed.

Acrobat 9 Pro " An error occurred while sending mail"

Dear Gurus:
Free ice cream to the person with the answer that works.      I use Vista OS, 32 bit;    IE (Primary) and Mozilla;   Outlook E-mail (primary) and Windows Mail. The preceding has been the case for the last two years so "nothing has changed".    I used Adobe Acrobat 9 Pro for two years and designed a number of interactive forms and used the functionality as much as possible.   Overall a good experience with Pro 9
Case in point, I designed an interactive employment application that was regularly used, updated and re-released over a period of about two years without incident. It was set up to be completed online by employment applicants. Once completed, they would click to "e-mail the office" the completed application then close the document.    It was set up with the button to send a form, and more precisely to send the form as .FDF to the mailto: address#1; address #2.   Again it worked fine using either Mozilla or IE until last week.      As usual, I made some minor edits to the existing body fields and left the buttons alone sine there was no need to bother them.
I emailed the revised .PDF document to   "the web guy" who added it to the website- like all the times before.     I went online to "test it" as usual so I filled it out.   When I click the button to send form to office, the option comes up to select the email client.   I use Outlook so I selected "Desktop E-mail Application", click OK and then I immediately get the message "An error has occurred while sending mail".      In the past without fail, the Outlook would open after 1-3 seconds and attach the   .FDF file with the normal .FDF and data jargon. no problem...      Also, I am aware of extending features to Reader and the licensing issue, but I doubt that is an issue.....
So, before I posted here I tried a few things:
A- I tried opening the source .PDF application locally on my PC and filled it out. I clicked the button to "sent the file" to myself.    To be clear this was not posted on the website, but it did open Outlook, create the email, add the .FDF and sent it to me.       HHHMMMM so it works locally....
B- Next, I started fresh with a blank adobe document page and added two items: 1- a text field and a new email submit button I created to send the data via FDF.    I set it up, it worked fine when I tested it locally on the PC and created the .FDF file and the Outlook email and I sent it to myself.     Then I took this same little test file and added it to a different website I have access to, I re-published the site, ccessed the form and no dice......    I got the same message, " an error occurred while sending mail" when I clicked OK to use the Desktop Email Application.
C- I read other posts and Googled for about 6 hours yesterday and now I am missing clumps of hair.
So, it seems something "happened" that will not let the email be created from an existing form; or a NEW form that are available for use on a website; but BOTH work just fine if accessed on a local PC.
Please , and thank you..
Brian P.

Hi Bill,
Thank you for your follow up.       I'm not sure what you mean by, "did I do a comparison to the original".    If you're asking whether I'm sure the .PDF and the .FDF are the "same" documents, they are... however the problem is even if they were entirely different forms, my issue is once the submit form button is clicked, Outlook fails to initialize and attach the   .FDF file .
I mentioned how I tried to recreate the "error" by building a new form from scratch in order to eliminate all the possible variables of having a bug in the form that had been updated so many times before without incident.   Even with the new form having just one text field and one submit form button, it worked as needed when I used the .PDF file locally right from my PC by filling out the field and submitting the form's .FDF data to myself.      It opened the Outlookprogram, created the mail and attached the .FDF file.     I clicked "send" and away it goes from "me" to "me" and I was able to open the email, click the .FDF then browse to the .PDF source form so the files could extract into the   .PDF.    All normal and all Okay , like 100 times before using the WEB, but not now... .
Today, even that simple form with one field and one submit button encounters the same "An error has occurred while sending mail" message upon clicking on the web based submit button.     The option comes up to let me select the email server and when I click "OK" , the error notice comes up...    grrrrrrrrrrrrr
In short, when the form is used in a website environment, it doesn't want to create the outgoing email with the .FDF file attachment.      Normally, it worked like a peach.
?? I dunno
BP

An error occurred while sending mail. The mail server responded: 5.7.1 [P4] Message blocked due to spam content in message

I have been using Thunderbird for a couple of years. On Friday 10 Apr my home email account stopped sending either new messages or replying to incoming emails. In addition I have Thunderbird get my work email and I can send and receive email just fine. I can also send email from my android phone and via the web.
The message that has started coming up is the following:
An error occurred while sending mail. The mail server responded: 5.7.1 [P4] Message blocked due to spam content in the message.. Please check the message and try again.
I have tried reinstalling Thunderbird but nothing changed, I tried changing the port from 25 to 587 to 465 but nothing changed. I do not understand what is going on as on Wednesday Apr 8 everything was working just fine.

I have just tried ringing RCN and they tell me that because I am not using an RCN email as such they can not help but he suggested that it was a filter in Thunderbird but I have not set any filters and can not see if there are any or how to change them. The only way sending my website url right now is to make it not look like a url. Where do I need to look to solve this as I first wrote last week everything was fine.

Error While sending mail

Working with 9.1.0.1
I have created a task which will send Mail to user when password is changed.
so in Notification Tab i Have clicked user check box and attached a appropiate Email Defination,
when task is triggered password is changed in OID but while sending mail i am getting below error.
I checked in metalink its shows when Email Server IT Res Name should be same as that configured in System property ,i checked both are same.
1 Dec 2011 18:06:54,735,[XELLERATE.REQUESTS],Class/Method: tcEmailNotificationUtil/sendEmail encounter some problems: {1}
lang.NullPointerException
at java.util.Hashtable.put(Hashtable.java:394)
at com.thortech.xl.dataobj.util.tcEmailNotificationUtil.sendEmail(Unknown Source)
at com.thortech.xl.dataobj.tcScheduleItem.checkForEmailNotification(Unknown Source)
at com.thortech.xl.dataobj.tcScheduleItem.eventPostUpdate(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.update(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.adapterfactory.events.tcAdpEvent.updateSchItem(Unknown Source)
at com.thortech.xl.adapterfactory.events.tcAdpEvent.finalizeProcessAdapter(Unknown Source)
at com.thortech.xl.adapterfactory.events.tcAdpEvent.finalizeAdapter(Unknown Source)
at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpOIDMODIFYUSER.implementation(adpOIDMODIFYUSER.java:81)
at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
at com.thortech.xl.dataobj.tcScheduleItem.runMilestoneEvent(Unknown Source)
at com.thortech.xl.dataobj.tcScheduleItem.eventPostInsert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.client.events.tcTriggerUserProcesses.insertMileStones(Unknown Source)
at com.thortech.xl.client.events.tcTriggerUserProcesses.trigger(Unknown Source)
at com.thortech.xl.client.events.tcUSRTriggerUserProcesses.implementation(Unknown Source)
at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.eventPostUpdate(Unknown Source)
at com.thortech.xl.dataobj.tcUSR.eventPostUpdate(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.update(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
at com.thortech.xl.ejb.beansimpl.tcUserOperationsBean.updateUserData(Unknown Source)
at com.thortech.xl.ejb.beansimpl.tcUserOperationsBean.updateUser(Unknown Source)
at com.thortech.xl.ejb.beans.tcUserOperationsSession.updateUser(Unknown Source)
at com.thortech.xl.ejb.beans.tcUserOperations_voj9p2_EOImpl.updateUser(tcUserOperations_voj9p2_EOImpl.java:1763)
at Thor.API.Operations.tcUserOperationsClient.updateUser(Unknown Source)
at sun.reflect.GeneratedMethodAccessor485.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)

Create a task "Send Email" which will be called on SUCCESS of Change Password Task
Attach tcComplete in INTEGRATION tab And send Email from "Send Email" using Notification Tab
It seems that issue is with Change Password Task
Or Use APIs
Re: Send Mail via java code but using Mail Definitions

Export from iPhoto while keeping original photo information?? NEED HELP!!!

I'm trying to set up a pc for my grandmother so I can take over her old computer (macbook air). However she has 11000 photos on iPhoto and I need to move then all onto a storage device (about 30GB) but when I export them the computer doesn't copy all the information such as the date the photo was taken etc. Talking to a guy in the apple store he said i couldn't do it, but he was being pretty unhelpful so I was wondering if anyone here could give me an answer. How do you export from iPhoto while keeping all the information?

This User Tip
https://discussions.apple.com/docs/DOC-4921
has details of the options in the Export dialogue.
As to dates specifically:
There are two kinds of metadata involved when you consider jpeg or other image file.
One is the file data. This is what the Finder shows. This tells you nothing about the contents of the file, just the File itself.
The problem with File metadata is that it can easily change as the file is moved from place to place or exported, e-mailed, uploaded etc.
Photographs have also got both Exif and IPTC metadata. The date and time that your camera snapped the Photograph is recorded in the Exif metadata. Regardless if what the file date says, this is the actual time recorded by the camera.
Photo applications like iPhoto, Aperture, Lightroom, Picasa, Photoshop etc get their date and time from the Exif metadata.
When you export from iPhoto to the Finder new file is created containing your Photo (and its Exif). The File date is - quite accurately - reported as the date of Export.
However, the Photo Date doesn't change.
The problem is that the Finder doesn't work with Exif.
So, your photo has the correct date, and so does the file, but they are different things. To sort on the Photo date you'll need to use a photo app.

I have suddenly got the following message An (SMTP) error occurred while sending mail. The server responded: Requested action aborted: This mail account has se

Having been on Thunderbird for some years I have suddenly got the following message when trying to send mail.
An (SMTP) error occurred while sending mail. The server responded: Requested action aborted: This mail account has sent too many messages in a short amount of time. Please try later..
I have checked the SMTP server settings in tools, account settings and they are as they have always been. Is there something I have missed?

Sending through web mail is totally irrelevant to using an SMTP server. The message even says it is from the server. Why do you think this is a Thunderbird problem.
The provider has put in place measures to keep people from spamming other email recipients using thier SMTP server. You have seen the result of those measures.

From clause while destype=mail

Similar Messages

Maybe you are looking for