From: text overlapping Subject: text in Mail
I'm having a display issue in Mail app: text in the From: line is offset to the point that it completely overlaps the Subject: line, leaving the From: line empty, and the Subject: line garbled with two lines of text superimposed. It's like the baseline of the From: line is permanently shifted down for some reason. All other text displays correctly.
This applies to incoming messages and sent messages. The To:, cc:, and From: fields in outgoing messages are not affected while they're being composed. (But they are affected once the message has been sent.)
I searched around the forums and couldn't find a description of this problem. Has anyone else run into this?
Thanks, I just tried that, no luck. I had already tried regular power off and reboot. It just goes off randomly, sometimes after just one word or if I am lucky I am able send out a short message before it goes off. It goes off typing in any of the apps.
Similar Messages
-
Mail Subject area overlapping From text
Hello,
When I go to read my mail where it says who it's from and the subject they are both on top of each other. So I can't click on there name or even see what it says. http://i13.photobucket.com/albums/a267/fireexplorerryan/Picture3.png?t=118166782 1 ... that is a picture of what it looks like. Any help would be appreciated.
Thanks!
1.83 GHz Intel Core Duo iMac, 1GB ram Mac OS X (10.4.9)Hello Ryan.
This is a font issue. You’ve probably either disabled or removed a font that Mail needs to work properly (e.g. Helvetica):
Font Management in Mac OS X Tiger and Panther -
Is there a way to block an e-mail address from texting me?
Is there a way to block an e-mail address from texting me?
http://lmgtfy.com/?q=ios+block+imessages
-
How can I send a series of texts from my phone to my e-mail address?
I want to send a series of texts from my phone to an e-mail address but evry time I send it, it just comes through as a text rather than an e-mail.
Please help
-
Hw to write text in mail body in UTL SMTP in oracle
hi all
i m using oracle demo mail package to send csv file as attachment to different users its successfull and i can also able to attach text file to it
but i m unable to write any text in mail body .
e.g.
mail body can be--
hi
This is test mail.
Regds
Sender.
can anyone suggest some way?u can try this code
this code takes the file from database and attach with mail and also send the body with it
it works fine.
CREATE OR REPLACE
procedure pdf_mail(
p_sender varchar2, -- sender, example: 'Me '
p_recipients varchar2, -- recipients, example: 'Someone '
p_subject varchar2, -- subject
p_text long, -- text
p_case_id number,
p_email_log_id number
-- p_filename varchar2, -- name of pdf file
p_blob blob pdf file
) is
conn utl_smtp.connection;
i number;
len number;
p_message_part varchar2(32767);
cursor c1 is
select file_name,document_pic
from clm_case_attachments ca,email_log_detail em
where
case_id = p_case_id
and ca.CASE_ATTACHMENT_ID = em.ATTACHMENT_ID
and em.ACTIVE = 'Y'
and em.EMAIL_LOG_ID = p_email_log_id;
BEGIN
conn := demo_mail.begin_mail(
sender => p_sender,
recipients => p_recipients,
subject => p_subject,
mime_type => demo_mail.MULTIPART_MIME_TYPE);
demo_mail.attach_text(
conn => conn,
data => p_text,
mime_type => 'text/html');
for lp in c1 loop
demo_mail.begin_attachment(
conn => conn,
mime_type => 'application/pdf',
inline => TRUE,
filename => lp.file_name,
transfer_enc => 'base64');
-- split the Base64 encoded attachment into multiple lines
i := 1;
len := DBMS_LOB.getLength(lp.document_pic);
WHILE (i < len) LOOP
IF(i + demo_mail.MAX_BASE64_LINE_WIDTH < len)THEN
UTL_SMTP.Write_Raw_Data (conn
, UTL_ENCODE.Base64_Encode(
DBMS_LOB.Substr(lp.document_pic, demo_mail.MAX_BASE64_LINE_WIDTH, i)));
ELSE
UTL_SMTP.Write_Raw_Data (conn
, UTL_ENCODE.Base64_Encode(
DBMS_LOB.Substr(lp.document_pic, (len - i)+1, i)));
END IF;
UTL_SMTP.Write_Data(conn, UTL_TCP.CRLF);
i := i + demo_mail.MAX_BASE64_LINE_WIDTH;
END LOOP;
demo_mail.end_attachment(conn => conn);
end loop;
demo_mail.end_mail( conn => conn );
END;
/ -
Hel with modifying cs5/6 script...create anchored frames from text
hello
I have one great time saver script for cs5 for create anchored frames from text tagged with/or charachter style/paragraph style. This work in cs6 but have some "bugs" for me. Script need to be compatible with InDesign CS6.
1. script in original (look bellow) create text frame which is fitted to lenght of the text. I make change and change 466 line:
AnchoredTextFrame.fit(FitOptions.FRAME_TO_CONTENT);
now frame is wide as I write in check box, good. But frame not resize to lenght of the text so I add after above lines 466-470:
var FO = FitOptions.FRAME_TO_CONTENT,
tfs = ([]).concat.apply([], app.activeDocument.stories.everyItem().textContainers),
t, i = tfs.length;
while( i-- ) (t=tfs[i]).overflows && ( t.locked || t.fit(FO) );
now all is ok but is here better way to make this to work? Simply, i want to spec text frame width in dialog box, frame will resize only verticaly in direction to amount text in frame. I dont want any overset text.
2. One "bug". For some reason script alter paragraph style of other text which is not subject to be cutted in anchored frame.
How to resolve this?
#targetengine "session"
Automating anchored object creation
Version: 2
Script by Thomas Silkjær
http://indesigning.net/
Модификация Б. Кащеев, www.adobeindesign.ru
Скрипт предназначен для создания привязанных фреймов из текста, отформатированного
каким-либо абзацным или символьным стилем. Эти стили задаются пользователем в диалоговом
окне скрита. Там же необходимо задать объектный стиль для привязанного фрейма, в котором
пользователь должен заранее задать оформление и параметры привязки. Далее необходимо
указать ширину привязанного фрейма, а его высота будет рассчитана автоматически исходя из
объема текста. При вводе дробных значений ширины привязанного фрейма в качестве
разделителя целой и дробной части следует использовать не запятую, а точку, следуя западным
стандартам разработчиков программы Adobe InDesign. Первоначально идея и скрипт по созданию
привязанных фреймов принадлежит Thomas Silkjær для версии ID CS4. C появлением версий CS5
и CS5.5 скрипт перестал в них выполняться, да и в версии CS4 не всегда корректно работал.
Анализируя недочеты скрипта в данной его версии были исправлены ошибки и внесены
функциональные дополнения исходя из понимания задачи автором модификации. Добавлена
возможность выбора стилей, если они они находятся в группах (папках), возможность выбора
единиц измерения из выпадающего списка, изменены GREP-выражения для поиска текста,
область действия скрипта ограничена материалом (Story), а не документом.
var myMeasureUnits = ["Milimeters","Centimeters","Points","Inches", "Picas", "Ciceros"];
var selectUnits;
var pStyleIndex = null;
var cStyleIndex = null;
var oStyleIndex = null;
var myH, myW;
function main()
app.scriptPreferences.userInteractionLevel = UserInteractionLevels.interactWithAll;
if (app.documents.length == 0)
alert ("Document is not open. Open document first");
return;
var myParaStyleList = myGetParagraphStyleNames();
var myCharStyleList = myGetCharacterStyleNames();
var myObjStyleList = myGetObjStyleNames();
if(app.selection.length && app.selection[0].hasOwnProperty("baseline"))
var myStory = app.selection[0].parentStory;
var myWin = myDialog(myParaStyleList, myCharStyleList, myObjStyleList);
if ( myWin.show() == 1 )
var myDocument = app.activeDocument
with (myDocument.viewPreferences){
// Сохраняем старые единицы измерения в переменных myOldXUnits, myOldYUnits
var myOldXUnits = horizontalMeasurementUnits;
var myOldYUnits = verticalMeasurementUnits;
// Устанавливаем новые единицы измерения
switch(selectUnits)
case 0:
horizontalMeasurementUnits = MeasurementUnits.millimeters;
verticalMeasurementUnits = MeasurementUnits.millimeters;
break;
case 1:
horizontalMeasurementUnits = MeasurementUnits.centimeters;
verticalMeasurementUnits = MeasurementUnits.centimeters;
break;
case 2:
horizontalMeasurementUnits = MeasurementUnits.points;
verticalMeasurementUnits = MeasurementUnits.points;
break;
case 3:
horizontalMeasurementUnits = MeasurementUnits.inches;
verticalMeasurementUnits = MeasurementUnits.inches;
break;
case 4:
horizontalMeasurementUnits = MeasurementUnits.picas;
verticalMeasurementUnits = MeasurementUnits.picas;
break;
case 5:
horizontalMeasurementUnits = MeasurementUnits.ciceros;
verticalMeasurementUnits = MeasurementUnits.ciceros;
break;
default: break;
} // switch
if(cStyleIndex == null)
{/*поиск по стилю абзаца*/
var pStyle = getParagraphStyleByName(myParaStyleList[pStyleIndex]);
resetGREPfindChange();
app.findGrepPreferences.appliedParagraphStyle = pStyle;
app.findGrepPreferences.findWhat = NothingEnum.nothing;
else //
// поиск по стилю символов
var cStyle = getCharacterStyleByName(myCharStyleList[cStyleIndex]);
resetGREPfindChange();
app.findGrepPreferences.appliedCharacterStyle = cStyle;
//app.findGrepPreferences.findWhat = ".+";
app.findGrepPreferences.findWhat = NothingEnum.nothing;
var foundItems = myStory.findGrep();
if(!foundItems.length) {
alert("Found the text to be placed in a linked frames"); exit();
//alert(foundItems.length);
//alert (foundItems[0].contents)
//alert (foundItems[1].contents)
var oStyle = getObjectStyleByName(myObjStyleList[oStyleIndex]);
for(var i = foundItems.length-1; i >=0; i--)
//alert (foundItems[i].contents)
createAnchoredFrame(foundItems[i], oStyle);
with (myDocument.viewPreferences){
try{
horizontalMeasurementUnits = myOldXUnits;
verticalMeasurementUnits = myOldYUnits;
catch(myError){
alert("Unable to return to the original unit");
} //if ( myWin.show()
} //if(app.selection.length && app.selection[0].hasOwnProperty("baseline"))
else
alert("Place the cursor in the text and run the script again")
} // main
function myGetParagraphStyleNames()
// Получаем список стилей абзацев
var curGroup;
var curGroupName;
var curNameInGroup;
var myParagraphStyleNames = app.activeDocument.paragraphStyles.everyItem().name;
myParagraphStyleNames.shift(); // удаление стиля No Paragraph Style
var paraGroups = app.activeDocument.paragraphStyleGroups;
var paraGroupsLen = paraGroups.length;
for(var i = 0; i < paraGroupsLen; i++) {
curGroup = paraGroups[i];
curGroupName = paraGroups[i].name;
curGroupStyleNames = curGroup.paragraphStyles.everyItem().name
for (j=0; j< curGroupStyleNames.length; j++)
curNameInGroup = curGroupName +":"+ curGroupStyleNames[j];
myParagraphStyleNames.push(curNameInGroup);
return myParagraphStyleNames;
function myGetCharacterStyleNames()
// Получаем список символьных стилей
var curGroup;
var curGroupName;
var curNameInGroup;
var myCharacterStyleNames = app.activeDocument.characterStyles.everyItem().name;
myCharacterStyleNames.shift(); // удаление стиля None
var charGroups = app.activeDocument.characterStyleGroups;
var charStyleGroupLen = charGroups.length;
for(var i=0; i < charStyleGroupLen; i++)
curGroup = charGroups[i];
curGroupName = charGroups[i].name;
curGroupStyleNames = curGroup.characterStyles.everyItem().name;
for (j=0; j< curGroupStyleNames.length; j++)
curNameInGroup = curGroupName +":"+ curGroupStyleNames[j];
myCharacterStyleNames.push(curNameInGroup);
} //for
return myCharacterStyleNames;
} // fnc
function myGetObjStyleNames()
var curGroup;
var curGroupName;
var curNameInGroup;
var myObjStyleNames = app.activeDocument.objectStyles.everyItem().name;
myObjStyleNames.shift();
var objGroups = app.activeDocument.objectStyleGroups;
var objStyleGroupLen = objGroups.length;
for(var i=0; i < objStyleGroupLen; i++)
curGroup = objGroups[i];
curGroupName = objGroups[i].name;
curGroupStyleNames = curGroup.objectStyles.everyItem().name;
for (var j=0; j< curGroupStyleNames.length; j++)
curNameInGroup = curGroupName +":"+ curGroupStyleNames[j];
myObjStyleNames.push(curNameInGroup);
} //for
return myObjStyleNames;
} // fnc
function myDialog(myParaStyleList, myCharStyleList, myObjStyleList)
var myDialog = new Window('dialog', 'Create anchored text frames');
this.windowRef = myDialog;
myDialog.orientation = "column";
myDialog.alignChildren = ['fill', 'fill'];
// добавляем панель 1 с элементами управления
myDialog.Pnl1 = myDialog.add("panel", undefined, "Move the text in linked frames");
myDialog.Pnl1.orientation = "column";
myDialog.Pnl1.alignChildren = "left";
myDialog.Pnl1.pstyle = myDialog.Pnl1.add('checkbox', undefined, "Text with the paragraph style");
myDialog.Pnl1.pstyle.value = false;
myDialog.Pnl1.dropdownParaStyle = myDialog.Pnl1.add("dropdownlist", undefined, myParaStyleList);
myDialog.Pnl1.dropdownParaStyle.title = "Select the paragraph style ";
myDialog.Pnl1.dropdownParaStyle.minimumSize = [250,20];
myDialog.Pnl1.dropdownParaStyle.enabled = false;
myDialog.Pnl1.dropdownParaStyle.selection = 0;
if(myCharStyleList.length)
myDialog.Pnl1.сstyle = myDialog.Pnl1.add('checkbox', undefined, "Text with character style");
myDialog.Pnl1.сstyle.value = false;
myDialog.Pnl1.dropdownCharStyle = myDialog.Pnl1.add("dropdownlist", undefined, myCharStyleList );
myDialog.Pnl1.dropdownCharStyle.title = "Select the character style ";
myDialog.Pnl1.dropdownCharStyle.minimumSize = [250,20];
myDialog.Pnl1.dropdownCharStyle.enabled = false;
myDialog.Pnl1.dropdownCharStyle.selection = 0;
myDialog.Pnl1.pstyle.onClick = function()
if(this.value) {
myDialog.Pnl1.dropdownParaStyle.enabled = true;
myDialog.Pnl1.dropdownCharStyle.enabled = false;
myDialog.Pnl1.сstyle.value = false;
else
myDialog.Pnl1.dropdownParaStyle.enabled = false;
myDialog.Pnl1.dropdownCharStyle.enabled = true ;
myDialog.Pnl1.сstyle.value = true;
}// fnc
myDialog.Pnl1.сstyle.onClick = function()
if(this.value)
myDialog.Pnl1.dropdownCharStyle.enabled = true;
myDialog.Pnl1.dropdownParaStyle.enabled = false;
myDialog.Pnl1.pstyle.value = false;
else
myDialog.Pnl1.dropdownCharStyle.enabled = false;
myDialog.Pnl1.dropdownParaStyle.enabled = true ;
myDialog.Pnl1.pstyle.value = true;
}// fnc
}// if(myCharStyleList.length)
else
myDialog.Pnl1.pstyle.onClick = function()
if(this.value)
myDialog.Pnl1.dropdownParaStyle.enabled = true;
else
myDialog.Pnl1.dropdownParaStyle.enabled = false;
// Вторая панель
myDialog.Pnl2 = myDialog.add("panel", undefined, "Parameters of the text frame");
myDialog.Pnl2.orientation = "column";
myDialog.Pnl2.alignChildren = "left";
myDialog.Pnl2.dropdownObjStyle = myDialog.Pnl2.add("dropdownlist", undefined, myObjStyleList );
myDialog.Pnl2.dropdownObjStyle.title = "Select an object style ";
myDialog.Pnl2.dropdownObjStyle.minimumSize = [250,20];
myDialog.Pnl2.dropdownObjStyle.enabled = true;
myDialog.Pnl2.dropdownObjStyle.selection = 0;
myDialog.Pnl2.Group1 = myDialog.Pnl2.add( "group" );
myDialog.Pnl2.Group1.stxt1 = myDialog.Pnl2.Group1.add("statictext", undefined, "The width of the text frame");
myDialog.Pnl2.Group1.etxt = myDialog.Pnl2.Group1.add("edittext", undefined, "40");
myDialog.Pnl2.Group1.etxt.characters = 10;
myDialog.Pnl2.Group1.dropdownMeasurementUnits = myDialog.Pnl2.Group1.add("dropdownlist", undefined, myMeasureUnits );
myDialog.Pnl2.Group1.dropdownMeasurementUnits.maximumSize = [80,20];
myDialog.Pnl2.Group1.dropdownMeasurementUnits.selection = 0;
//myDialog.Pnl2.Group1.stxt2 = myDialog.Pnl2.Group1.add("statictext", undefined, "mm ");
/*myDialog.Pnl2.Group2 = myDialog.Pnl2.add( "group" );
myDialog.Pnl2.Group2.stxt1 = myDialog.Pnl2.Group2.add("statictext", undefined, "Высота привязанного фрейма ");
myDialog.Pnl2.Group2.etxt = myDialog.Pnl2.Group2.add("edittext", undefined, "30");
myDialog.Pnl2.Group2.etxt.characters = 10;
//myDialog.Pnl2.Group2.stxt2 = myDialog.Pnl2.Group2.add("statictext", undefined, "mm ");*/
myDialog.Pnl2.stxt1 = myDialog.Pnl2.add("statictext", undefined, "Attention! When you enter fractional values as");
myDialog.Pnl2.stxt2 = myDialog.Pnl2.add("statictext", undefined, "the decimal part, should be used");
myDialog.Pnl2.stxt3 = myDialog.Pnl2.add("statictext", undefined, "point, not comma.");
myDialog.Pnl2.stxt1.graphics.foregroundColor = myDialog.Pnl2.stxt1.graphics.newPen (myDialog.Pnl2.stxt1.graphics.PenType.SOLID_COLOR, [1, 0, 0, 1], 1);
myDialog.Pnl2.stxt2.graphics.foregroundColor = myDialog.Pnl2.stxt2.graphics.newPen (myDialog.Pnl2.stxt2.graphics.PenType.SOLID_COLOR, [1, 0, 0, 1], 1);
myDialog.Pnl2.stxt3.graphics.foregroundColor = myDialog.Pnl2.stxt3.graphics.newPen (myDialog.Pnl2.stxt3.graphics.PenType.SOLID_COLOR, [1, 0, 0, 1], 1);
// --------- кнопки --------------
var myGroup = myDialog.add( "group" );
myGroup.orientation = 'row';
myGroup.alignChildren = ['fill', 'fill'];
myGroup.okButton = myGroup.add( "button", undefined, "OK" );
myGroup.okButton.onClick = function()
if(myCharStyleList.length) // есть символьные стили в документе
if(!myDialog.Pnl1.pstyle.value && !myDialog.Pnl1.сstyle.value)
alert("You must select a paragraph style or character style");
return ;
if(myDialog.Pnl1.pstyle.value) { pStyleIndex= myDialog.Pnl1.dropdownParaStyle.selection.index; cStyleIndex = null;}
else {cStyleIndex = myDialog.Pnl1.dropdownCharStyle.selection.index; pStyleIndex=null; }
else // нет символьных стилей
if(!myDialog.Pnl1.pstyle.value)
alert("You must select a paragraph style");
return;
pStyleIndex = myDialog.Pnl1.dropdownParaStyle.selection.index;
cStyleIndex = null;
} // else // нет символьных стилей
oStyleIndex = myDialog.Pnl2.dropdownObjStyle.selection.index;
if(myDialog.Pnl2.Group1.etxt.text =="")
alert("Enter the width of the text frame");
return;
else
myW = myDialog.Pnl2.Group1.etxt.text;
myH = myW;
/*if(myDialog.Pnl2.Group2.etxt.text == "")
alert("Введите высоту привязанного фрейма");
return;
else
myH = myDialog.Pnl2.Group2.etxt.text;
selectUnits = myDialog.Pnl2.Group1.dropdownMeasurementUnits.selection.index;
myDialog= this.window.close( 1 );
myGroup.cancelButton = myGroup.add( "button", undefined, "Cancel" );
myGroup.cancelButton.onClick = function() { myDialog = this.window.close( 0 ); }
myDialog.Pnl3 = myDialog.add("panel", undefined, "");
myDialog.Pnl2.alignChildren = "left";
myDialog.Pnl3.stxt = myDialog.Pnl3.add("statictext", undefined, "(с) Thomas Silkjær (с) Борис Кащеев, www.adobeindesign.ru ");
return myDialog;
} // fnc
function getParagraphStyleByName(myStyleName)
var DocParaStyles = app.activeDocument.paragraphStyles;
var DocParaGroups = app.activeDocument.paragraphStyleGroups;
myStyleName = ""+myStyleName;
var pos = myStyleName.indexOf(":")
if(pos == -1)
// стиль не в группе
var myStyle = DocParaStyles.item(myStyleName);
return myStyle;
} //if
else
var myGroupAndStyleNames = myStyleName.split(":")
var myGroupName = myGroupAndStyleNames[0];
var myStyleName = myGroupAndStyleNames[1];
var myGroup =DocParaGroups.item(myGroupName);
return myGroup.paragraphStyles.item(myStyleName);
} // fnc
function getCharacterStyleByName(myStyleName)
var DocChStyles = app.activeDocument.characterStyles;
var DocCharGroups = app.activeDocument.characterStyleGroups;
// Есть ли в имени полученного символьного стиля двоеточие? (двоеточие разделяет название группы стилей и название стиля)
myStyleName = String (myStyleName);
var pos = myStyleName.indexOf(":");
if(pos == -1)
// стиль не в группе
return DocChStyles.item(myStyleName)
} //if...
else
{// Стиль в какой-то группе
var myGroupAndStyleNames = myStyleName.split(":")
var myGroupName = myGroupAndStyleNames[0];
var myStyleName = myGroupAndStyleNames[1];
var myGroup = DocCharGroups.item(myGroupName);
return myGroup.characterStyles.itemByName(myStyleName);
} // else
} // fnc()+
function getObjectStyleByName(myStyleName)
var DocObjStyles = app.activeDocument.objectStyles;
var DocCObjGroups = app.activeDocument.objectStyleGroups;
myStyleName = String (myStyleName);
var pos = myStyleName.indexOf(":");
if(pos == -1)
// стиль не в группе
return DocObjStyles.item(myStyleName);
} //if...
var myGroupAndStyleNames = myStyleName.split(":");
var myGroupName = myGroupAndStyleNames[0];
var myStyleName = myGroupAndStyleNames[1];
var myGroup = DocObjGroups.item(myGroupName);
return myGroup.objectStyles.itemByName(myStyleName);
} //fnc
function resetGREPfindChange()
app.changeGrepPreferences = NothingEnum.nothing;
app.findGrepPreferences = NothingEnum.nothing;
app.findChangeGrepOptions.includeFootnotes = false;
app.findChangeGrepOptions.includeHiddenLayers = false;
app.findChangeGrepOptions.includeLockedLayersForFind = false;
app.findChangeGrepOptions.includeLockedStoriesForFind = false;
app.findChangeGrepOptions.includeMasterPages = false;
function createAnchoredFrame(myText, myObjStyle)
var myGeometricBounds = [];
var myInsertionPoint = myText.insertionPoints[0];
myInsertionPoint.select;
var AnchoredTextFrame = myInsertionPoint.textFrames.add();
myGeometricBounds = AnchoredTextFrame.geometricBounds;
//alert(parseFloat(myH) + " " + parseFloat(myW))
myGeometricBounds[2] = myGeometricBounds[0] + parseFloat(myH);
myGeometricBounds[3] = myGeometricBounds[1] + parseFloat(myW);
AnchoredTextFrame.geometricBounds = myGeometricBounds;
AnchoredTextFrame.anchoredObjectSettings.anchoredPosition = AnchorPosition.anchored;
myText.move(LocationOptions.before, AnchoredTextFrame.texts[0]);
AnchoredTextFrame.appliedObjectStyle = myObjStyle;
AnchoredTextFrame.fit(FitOptions.CONTENT_TO_FRAME);
var FO = FitOptions.FRAME_TO_CONTENT,
tfs = ([]).concat.apply([], app.activeDocument.stories.everyItem().textContainers),
t, i = tfs.length;
while( i-- ) (t=tfs[i]).overflows && ( t.locked || t.fit(FO) );
} //fnc
main();Hi Cari,
I did create a new user account (admin level) and InDesign works like a charm.
When I went back to the other account, plug-ins gone, I deleted the prefs and caches, restarted and still everything is crashing as before.
At least I am working on one account and I will contiue to troubleshoot on the other account. And at some point either the new account will crash or the old account will work and I will go from there.
Thanks for the info about Mac remembering info. Always trying to be helpful these Macs.
And thanks for getting at least into a workable space!!! I am supremely grateful! -
How to magnify text in Mail App ?
How to magnify the mail text in Mail App ?
it is not problem in Gmail or Yahoo so why not magnify in Mail App ?You can set a font size in Mail, Preferences, Fonts & Colors.
You can adjust font size on the fly by adding the "smaller-bigger" buttons to the toolbar. Open a message and then use "customize toolbar". You will have that button from then on.
charlie -
Want to add text to mail body of BACS Remittance Advice
Hi Experts,
Blelow is the requirement.
User is sending the remittance advice to vendors, user wants to include a u2018fixedu2019 text also in that mail.
User is sending remittance advice to vendor in PDF format which is attached in a mail, I need to add some text to mail body.
But not able to find how mail body is filled up.
Main program RFFOGB_T u2013 Payment program
Includes RFFORI06 u2013 Remittance advice
Can you please suggest how I will be able to add the text to the mail ?
Regards,
Subhashree.Hi E_Hinojosa ,
Its helped a lot.
But one doubt,what is process exit and how to search the same from a program or include.
The required code(which is there in note) is there in include 06 but which process exit I will use for the BACS remittance and how to fill the value of finaa-mail_body_text in process exit.
Please give me a clear idea.
Thanks,
Subhashree. -
What is Rich Text in Mail.app?
When I compose a message in Mail.app, I have the option of sending it in "Plain Text" or "Rich Text".
When I receive a Formatted Text message in Mail.app, it is generally --but not always-- handled correctly. The formatting applied by the sender, in whatever email client, seems to appear consistently in Mail.app. Not always perfectly.
Probably I can find a standard for RTF as applies to many Text Processor apps...
• Is that the same "Rich Text" as followed by Mail.app?
• Is there a public RTF standard that Mail.app is known to follow?
• Is there a direct method, or a reasonably simple indirect method for making Mail.app's RTF formatting visible?
• Beside Mail.app's GUI commands, is there a direct method, or a reasonably simple indirect method for editing Mail.app's RTF formatting?
I think most email clients transmit Formatted Text messages using HTML tags.
• Does mail.app handle these in addition to RTF, convert HTML tags to RTF, or is, in this context, RTF ~= HTML?
• Is there a public standard HTML standard --certainly a subset-- that Mail.app is known to follow?
I think all Formatted Text messages are actually transmitted by email servers with two copies, one formatted and one plain-text. I know I can often see HTML markup when I use View-->Message-->Raw Source on an incoming message selected. But there doesn't seem to be any way of viewing or editing the markup in the reply message. Specifically View-->Message-->Raw Source is grey when a reply is selected.
• Is there a direct method, or a reasonably simple indirect method for editing HTML tags when responding to a formatted message?
A big annoyance: Often, when I reply to a formatted message, some groups of text, when selected, are surrounded by a rounded-corner grey rectangle, with a circle-X close/delete button at the upper left. These are also visible when I'm composing a reply. It's difficult -- sometimes impossible-- to open a new line for a reply inside such boxes. I think this box corresponds to HTML table cells --or possibly other containers-- in the incoming message.
• Does Mail.app use the rounded-corner grey rectangle to mark a received table cell? Anything else?
• Is there a direct method, or reasonably simple indirect method for removing the cell container so vertical space can be inserted?
• Does Mail.app use any other special markings to denote HTML formatting?
In other words,
• What is "Rich Text" in Mail.app?
TIAHen3ry wrote:
Probably I can find a standard for RTF as applies to many Text Processor apps...
• Is that the same "Rich Text" as followed by Mail.app?
No, Mail.app is using HTML - as you mentioned that's pretty much true for all email applications that send or receive formatted messages. When you copy and paste from another app, it's converted to HTML (I think that conversion is handled by the system, as part of the copy/paste operation - i.e., it's converted while still on the clipboard).
• Is there a public RTF standard that Mail.app is known to follow?
HTML, not RTF. w3.org is the standards body. Like many OS X apps, Mail.app is using Webkit (the Safari web rendering engine) to display the messages (although I do notice some differences from Safari, so it's probably limited somehow, most likely for security reasons)
• Is there a direct method, or a reasonably simple indirect method for making Mail.app's RTF formatting visible?
Save your outgoing message, then view it in your "Drafts" folder. Click the "View" menu, then "Message --> Raw Source".
• Beside Mail.app's GUI commands, is there a direct method, or a reasonably simple indirect method for editing Mail.app's RTF formatting?
Nope. The "raw source" view cannot be edited.
A big annoyance: Often, when I reply to a formatted message, some groups of text, when selected, are surrounded by a rounded-corner grey rectangle, with a circle-X close/delete button at the upper left. These are also visible when I'm composing a reply. It's difficult -- sometimes impossible-- to open a new line for a reply inside such boxes. I think this box corresponds to HTML table cells --or possibly other containers-- in the incoming message.
That's essentially correct, the box corresponds to the HTML table. I think you get that when you add some HTML code to your message that Mail doesn't have the interface to edit (no table tools to add or delete rows, for instance), but I've only encountered it with tables.
• Is there a direct method, or reasonably simple indirect method for removing the cell container so vertical space can be inserted?
I usually resort to pasting the message into a more capable editor - often TextEdit is good enough, but I've sometimes resorted to using Dreamweaver. Make your changes, then paste the result (from the WYSIWYG, not the HTML code) back into your mail message.
Other times I just avoid using Mail.app. Thunderbird is better for complicated HTML, or was better - it's been a while since I've needed to use for this purpose.
• Does Mail.app use any other special markings to denote HTML formatting?
No, not to my knowledge. -
It seems that the use of the iPhone 4 Bluetooth to a phone headset (In this case a hearing aid 'streamer') prevents all other phone option sounds (Text, Alerts, mail, etc.) from working. Is it normal that there is a conflict between the iPhone 4 Bluetooth use and other phone item sound notifications?
No, iOS does not offer that option. You can offer Apple feedback here: http://www.apple.com/feedback/
-
Photos from texts...
hi, i'm trying to figure out how to get photos from text messages, off my phone and on to my computer. i am able to save photos i've taken, but not that others have sent me. is it possible to do it without e-mailing them to myself? thanks!
I think u can solve your issue by installing blackberry desktop software.
-
How is it possible to adjust the background images and the text in Mail?
How is it possible to adjust the background images and the text in Mail?
Here's the solution I used to solve the same problem. If you're not comfortable editing the source files, this might be more than you want to take on--but I've done it to several files with no ill effects. You can follow the instructions on this page and the referenced original post from (he includes a link on the page). Good luck! He's got some great tips on some of his other pages.
http://photo.rwboyer.com/2010/03/15/aperture-3-book-theme-trick/
A warning about editing the Master pages--it only edits them in that book--it doesn't update the theme. So if you go to create another book with those same layouts, you'll have to duplicate the book and replace all the images. An alternative would be to create a "clean" book with no photos in it and then just use that as a starting point each time. -
Format text in mail 4.5 snow leopard
For some reason I can no longer format text in Mail 4.5. ie can't select a word and 'command b' to make it bold.
My preferences are set to Rich Text format so why does it not take any notice of my command?
I only noticed this when I moved my general mailing stuff from an old G4 before getting rid of it. As there is no going back I need to find a solution - preferably one that does not involve re-installing the system from scratch.
Any help would be much appreciated.
ThanksHi ThrashNeon,
Thanks for your reply but my problem was a bit more fundamental.
Mainly due to the fact that some time ago I stupidly removed some fonts because of clashes whilst producing a job in InDesign.
Having finally remembered that the problem was quickly resolved by turning the fonts back on.
Very sorry for being so stupid.
But thanks
Keith -
Using AppleScript to find specific text in mail message?
I'm new to scripting, and I'm a bit lost on this one...
Is there any way to use AppleScript to find a file name from within the body of a mail message so it can be used later in the script?
Specifically, I want to use AppleScript to "read" the content of a mail message and look for a paragraph that says "Filename: MyFileName" so I can set "MyFileName" as a variable. (There will always be a paragraph that begins with "Filename: " in this particular email message.)
This will part of a larger script that uses Fetch to download "MyFileName" from our FTP server.
Thanks in advance for any ideas - I'm struggling with this one.
Andy GillOk, red_menace above me had a shorter and more elegant solution to the question, I'm adding this just for another example.
To solve your problem I'd make a mail rule that looked for any messages with "Filename:" in them (along with whatever criteria you wanted, like sender, domain, etc). The mail rule would execute the Applescript. My assumption is that the "Filename:foobar" text could be anywhere in the email, not necessarily the first thing in a paragraph, so I had to parse it differently.
The results end up in a datalist, (theFilename {} ) that you can parse later to collect all filenames found in whatever messages were processed.
I realize this could be cleaner, hope it's not hard to follow, but I did it really fast. It works flawlessly for me, picking out the name of the file no matter where in the email it appears.
using terms from application "Mail"
on perform mail action with messages theSelectedMessages for rule theRule
repeat with aCounter from 1 to count theSelectedMessages
set theMessage to item aCounter of theSelectedMessages
set theContent to content of theMessage
set theWords to every word of theContent
set theFilename to {}
set tid to AppleScript's text item delimiters
set AppleScript's text item delimiters to ":"
repeat with thisLoop in theWords
try
if (text item 1 of thisLoop) is "Filename" then
set end of theFilename to (text item 2 of thisLoop)
-- rest of your logic goes here the display is just to show it finds the filename, take it out!
display dialog theFilename ¬
buttons {"OK"}
end if
end try
end repeat
set AppleScript's text item delimiters to tid
end repeat
end perform mail action with messages
end using terms from
Message was edited by: stephen.bradley Typos for the win! -
What is the difference between Create shapes or masks from text characters?
What is the main difference between Create shapes or masks from text characters and why use one over the other, or when is one preferred over the other?
I am still fairly new to AE and am trying to better understand this, or can you point me to where i might look for the answer?
CS5 if that make a difference.One creates masks, the other creates shape layers. There are properties that you can animate with shape layers that are not available to masks. There are also a few things you can do with masks that you can't with shape layers.
I'd suggest you take a look at the help files or do a Google Search on After Effects Shape Tutorials. -
My iPhone 5 won't allow me to open pictures from text messages.
My iPhone 5 won't allow me to open pictures from text messages. I tap the picture, then it just goes to a "thinking" screen and says "Restoring..."
I tried restarting, but it still won't allow me to open pictures.
Please help!!My iPhone 5 is also having this problem. I just received it2 days ago and it would let me open mms messages, but ever since yesterday it will have a loading screen and never let me see it. I've just been having to save my picture into my camera roll and view it that way
Maybe you are looking for
-
How can I use a song as a ringtones
I would like to use a song purchased from iTunes for a ringtones but can't figure out how to do it
-
My hard drive crashed. how can i reload dreamweaver on a new hard drive?
my hard drive crashed. how can i reload dreamweaver on a new hard drive?
-
SMARTFORMS :How to print an inernal table inside a template cell?
Hi all, I have a smartform which contains a template. I want to print inside a cell of the template the content of an internal table. Is this possible ?if yes , how to do that ? Thanks.
-
Can any tell me the limitations and bugs in Taleo learn
Hi All, I know Taleo Recruiting but new in Taleo learn wanted to know the limitations and bugs which are currently available in Taleo Learn. Being you expert who have implemented Taleo learn, It will be greatly appreciated if you can share some of th
-
Needed help : "Error 4 in update"
HI GUYS, i'm loading data into standard cube(0rt_c01) using info source 2lis_03_BF(material movemnts). while loading i got the following error "No SID found for value 'PC ' of characteristic 0BASE_UOM " "error 4 in update". any help would be apprecia