Front Row Sloooooooow to play Movie Trailers....

When I go to view trailers in iTunes or even from Apple's website I don't have any problems with them starting quickly and playing through.
However, in Front Row - the movie posters sometimes take upwards to a minute to load and then many trailers will say "loading trailer" for several minutes before finally playing. Once they're going I occasionally get some stuttering as well.
I've upgraded to Quicktime 7.1 which didn't seem to help.
Any ideas or others experiencing similar problems?
iMac - 17" - 1.83GHz Intel Core Duo - 1Gb DDR2 SDRAM Mac OS X (10.4.6)

Downloading the movie posters will be a little slow.
The stuttering should not be happening however.
Make sure that QT is setup with your specific internet type (dialup, dsl, t1, t2, etc.)
1. Open system prefs.
2. Click QuickTime
3. Click streaming
4. Where it says "Streaming Speed:", select your internet type
Try to watch a trailer again, if it still is happening, this might be a problem with the Server which the Apple Trailers is on, since it can get bogged down with requests.
Hope this helps,
Cory

Similar Messages

Front Row won't play movie trailers and previews

When I try to access the apple movie/Tv trailers through front row I get the message:
"the selected video could not be played. The format was not recognized"
Front Row and iTunes are both updated to the latest version-
My Firewall's set to allow all incoming connections-
The trailers work fine in iTunes
Any ideas what could be causing this and what I can do about it?

I am also experiencing this problem. When I select the Trailer I want to watch, it gives my the same error. Both iTunes and Front Row are updated to the latest version. If it helps, I recently did a complete re-install of my system. I would greatly appreciate it if someone could help us here!

Front Row won't play Theatrical Trailers

When I try to play a theatrical trailer in Front Row on my iMac, I get the following error:
+The selected video could not be played. The format was not recognized.+
Only a few days ago it was working - can anyone help fix this?

Same here. Some work, some don't. Sometimes they work, sometimes not. I have a brand new iMac at work with SnowLeopard, while at home I have a slightly older iMac running Leopard. Last night I tried accessing some trailers at home and some worked, while the one next to it would not. Same thing also on Apple TV. It is infuriating and baffling. It is one of the nice things about Apple TV to be able to browse the trailers... but if they don't work it renders the thing useless.

How to tell Front Row to look for movies on a USB drive?

I'm working on getting all my dvd's on two 500gb usb drives - using Handbrake to encode everything. This is much faster with a new 2.4ghz 24" iMac by the way (6-8hrs on my 1.8ghz athlon vs 1-2 with the iMac...woohoo).
What I'm trying to do is get the movies (on the usb drives) to show up in Front Row. One way I know of is by making an alias for each movie and moving the alias to my "Movies" folder on the main HD. This is a little tedious. When I simply drag and drop it in the "Movies" folder it just copies it and that is not what I want. Is there a way to just tell Front Row where to look for the movies? If I use iTunes the same thing happens, it just transfers all movies to the main HD...nevermind. I unchecked the box that said to copy everything.
The plan was on using iTunes for movies I encode specifically for iPods exclusively, searching through 600+ movies to get a few for the iPod doesn't seem user friendly.
So the question remains. Is there another way to get Front Row to just see the movies on another drive without iTunes or using an alias for each one or are those 2 my only choices?

I'm glad you got it figured out. Front Row actually looks for movie files in two places. First, as you've discovered, it looks inside your user's "Movies" folder. An alias there pointing to a different location will lead Front Row to the other location. Also, Front Row looks inside iTunes for movies. This way, it can find TV shows, music videos and movies purchased from the iTunes Music Store. Another option, besides making an alias in your "Movies" folder, would be to add the movies to iTunes.
-Doug

Front Row Won't Play Slideshow Music (iTunes)

I created a slideshow in iPhoto and selected an iTunes playlist as my music source. When I play the slideshow from Front Row the music does not play. However, if I play a photo event from Front Row the default music does play. Why won't my slideshow play the music?
Please advise.

Front Row in Mac OS X 10.5.x has been broken the whole time. It used to work fine in Mac OS X 10.4.x (Tiger). Front Row will not play an iTunes playlist during a slideshow if the playlist contains more than one song. You can use a playlist that only has one song in it, but then you might as well just choose a single song instead of a playlist! I would suggest you send Apple some Mac OS X feedback:
http://www.apple.com/feedback/macosx.html
For what it's worth, iPhoto seems to work fine with slideshows and iTunes playlists with more than one song.
-Doug

Quicktime 7.6 NOT playing movie trailers from Apple site???

I have all the latest software OSX 10.56 running on a 3.06GHz Intel Duo but Quicktime 7.6 will not play movie trailers when on the Apple site. When I try, the site advises I need the latest Quicktime which I have already downloaded and installed fresh. It just doesn't seem to recognize it no matter which movies I try and view.
Please help if you can?
Thanks

It's a piece of component software that's used by QuickTime to allow it to decode or encode different types of video/audio formats. The issue for me was that I had an old codec still in my system that should have been deleted/replaced during the last update, but was not. So when QT tried to access what it thought was an appropriate up-to-date decoder, it couldn't process the video with it and gave me a blank screen. Something similar could be happening to you as well.
Try deleting all of the QuickTime components and folders in your system. Because you're using Leopard, I'm not sure all the files will be where they are for me. Do a thorough search of your system and clean out any QuickTime files you find, they'll be in HDD/Library, HDD/System/Library, and HDD/Users/"yourusername"/Library. Then reinstall QuickTime using the installer from Apple's downloads page(or Software update will probably work as well). You'll have to restart afterwards and make sure to repair permissions after you've rebooted(use Disk Utility). Then test out the trailers again and see if that solves it.

Front Row doesn't play trailers

Hi.
Front Row works as it should except for playing theatrical trailers. It says "Your computer is not connected to the internet." But my internet connection is fine. I also installed the system on a separate volume to make shure it isn't a problem coming from an update, setting or other applications. But it shows me the same error message.
I have another Macintosh with 10.5.8 and on this machine Front Row plays the trailers. So i think my internet connection is fine.
Mac Pro Quad Mid 2010
Mac OS 10.6.5

An Apple Tec referenced me to this support article.
http://support.apple.com/kb/TS1357
This solved the problem. But for my Mac, there was a small difference to this article. I had to set both ethernet ports to dhcp to get Front Row working.

Front Row Locking up with Movies

So far computer is behaving well, although I have found that Front Row will lock up if I try and view movies or podcasts, however movie trailers work fine.
I can force quit but after that Front Row won't launch any more until I restart. This seems repetable with same results. Viewing pictures from iphoto works fine.
Is anyone else having this problem. How else can I launch front row other than the remote. I don't see an app called Front Row. I want to see if issue is with remotes functionality or with Front Row.
Oh, also how about DVD playback? I have not run search on this yet but someone else with new imac had one DVD play fine and another one lock up.

Just to follow up on my own post...
Running the sample command on the unresponsive Front Row.app showed it was trying to resolve a font.
I had disabled the Hoefler Text font using Font Book, in an attempt to get iWeb to render blog pages as HTML instead of as images. After re-enabling Hoefler Text I re-launched Front Row, and it did not lock up.
I'll post a follow-up if the lockup recurs.
iMac 1.83GHz Core Duo, Powerbook G4 1.67GHz Mac OS X (10.4.5)

Front Row & Video Podcast Play Count

I have one of the new Core Duo 20" iMacs. I've found that Front Row does something unexepected. When I watch a video podcast through Front Row, and I mean watch it to the end of the file, the play count in iTunes is not updated. I've checked, and the count is updated for music files and audio podcasts. This only seems to happen with video podcasts. Any else having this problem? Solutions?
I suspect it's happening because audio is probably played through iTunes, whereas the video is Quicktime.
Thanks in advance,
J

I don't haven't used Front Row to play movies or video - but the problem you are describing has been happening in both Quicktime and iTunes on my Mac, ever since I installed Leopard. There are a few things I've tried that work to get the video and audio back in sync - one is to pause the video, and to leave it paused for 5 or 10 minutes. When I come back and restart it, sometimes it will play normally. The other thing that I've tried is to actually shut down iTunes and restart it - for some reason that works a bit more consistently.
Another problem I have is less dire - and that is occasionally a video or movie will lose its audio altogether - when that happens the "fix" is to stop the video for a few seconds, then restart it. It usually works. Again, the operative word is usually. Unfortunately I haven't found a way to stop this from happening at all - which is what I'd prefer, but these fixes (and sometimes a combination of them) will get me through a movie. I'd love some guidance from the home office on this though! Anyone at Apple care to take a bite?

Front Row won't play AC3

hey folks
Really annoying, front row and quicktime, dont play any of my movie files that require a ac3 codec.
i have downloaded the intel codecs pack but still no joy
has anyone else experienced this?
are there any recomended codecs out there
many thanks

I was going to suggest the same codec. I can't remember which I'm actually using, but I know I had to try several betas a year or so back to find something that worked well, and it now works nicely. AC3 (Dolby digital) is not in the standard packs.
So on another note:
What do you mean no pass through? Shortly I'll want to send audio through to my amp in dolby digital (using the mini TOSlink port). That includes DVD audio, digital TV and quicktime with AC3.
Apple seems to say that works.
"supporting encoded digital audio output (AC3 and DTS)"
http://docs.info.apple.com/article.html?artnum=303376-en
EyeTV 2.2 also says it supports the TOSlink port.
Are you saying it doesn't? That is pretty important to me, so I'm very interested.

Front Row won't play .mp4 files

I just recently started using Front Row and, for some reason, it won't play .mp4 files. The said files are in my Movie folder and show up in Front Row's "Movies" menu, but when I try to play them it says "Selected video could not be played, format was not recognized."
Please help!!

iTunes only supports MP4s encoded using the Main Profile, but many MP4s that you can download from the web are encoded using High Profile. These need to be converted.
You can use an app like VideoSpec or MediaInfo to list the encoding characteristics of your MP4s.

Front Row won't play widescren

I am using front rown on my intel mac.
My movies are in m4v format and play in widescreen in quicktime. However, they won't play in widescreen in Front Row.
Is there a way to fix this?
My thanks for any help that folks could provide.

I am having the same issue. I checked the format of the movie and it is a type the should be supported but whenever it plays I get the audio but the screen stays black for the duration of the movie. Hopefully there is a fix.

Front Row - Some Quicktime made movies = Black Screen

I have a problem with the new front row.
The problem is, that in the new front row, some music videos will not show, the title picture shows but only plays audio and the screen is black. It worked on the old front row perfectly. It plays in quicktime, well quicktime created the movie so it should play its own quicktime movies. It also plays in iTunes which I imported it into the iTunes area.
Plays (mp4)
16 Numar pan' la unu.mp4
AAC, Stereo (L R), 44,100 kHz
H.264 Decoder, 320 x 172, 16,7 Mill.
Datarate: 826.30 kBit/s
01 Bright Eyes.mp4
AAC, Stereo (L R), 44,100 kHz
H.264 Decoder, 768 x 438, 16,7 Mill
780.56 kBit/s
Doesn't Play (mp4)
Fruchtalarm.mp4
AAC, Stereo (L R), 44,100 kHz
H.264 Decoder, 640 x 480, 16,7 Mill
Datarate: 1499.25 kBit/s
04 Adolfs Bunker.mp4
AAC, Stereo (L R), 44,100 kHz
H.264 Decoder, 480 x 360, 16,7 Mill
Datarate: 807.06 kBit/s
Whats the difference? Except for the size?
or
Plays (Mov)
On top of spaghetti.mov
MPEG1 Muxed, 288 x 240 Pixel
Datarate: 857.13 kBit/s
Doesn't Play (Mov)
01 Wings of Angels.mov
AAC, Stereo (L R), 44,100 kHz
H.264 Decoder, 480 x 360, 16,7 Mill.
Datarate: 770.97 kBit/s
Der kleine Eskimo.mov
AAC, Stereo (L R), 44,100 kHz
H.264 Decoder, 480 x 360, 16,7 Mill
Datarate: 790.41 kBit/s
I don't feel like reencoding, might lose quality and it takes way too long, takes forever with quicktime, encoding once with quicktime is enough.
I am using MacOsX 10.5.1, Front Row 2.0, 20" Intel Core Duo 2.0 GHz.
Any help will be appreciated.

I add some infos:
I saw that when the track are correctly named with the language (ie: italiano, english, etc etc) fronw row can menage the correct track, while there are troubles when the names of audio are track1, track2...
Is there a software that can be use to rename existing audio tracks in a avi file?
best regards

Front Row doesn't play nicely with MP4's

Friends, I have several MP4 music videos which were downloaded from YouTube. They play fine in Quicktime, and Quicklook opens them fine. I dragged them into iTunes mostly just to see If they would play there. They work fine. The problem is that when I open MUSIC in Front Row, the videos are shown as an available playlist, but when I try to open that playlist, Front Row tells me that there is no music in the files. I wonder if I'm asking FR to do something it just doesn't want to do, or perhaps I need to rename the file, or store them in another manner in iTunes. It's not really a big deal, just one of those things that makes ya go Hmmmm....
For what it's worth, my QT version is 7.6, iTunes is version 8 and FR has been updated to 2.1.7.
I'll appreciate your insight.
Thanks
Jon

Yes, there are only three or four settings stored in there. The last module selected when you closed Front Row (Music, TV Shows, Podcasts, DVD, Photos, or Movies), the country your iTunes is set for (so Front Row can show the "top rated" items from the store) and whether or not you've turned on sound effects and/or the Front Row screen saver. No other preferences are stored there. All of the media-specific preferences are store in the application that controls that media (the DVD Player.app for the DVD settings, iTunes for the Music settings and iPhoto for the Photos settings).
-Doug

Front Row doesn't play music!!!

I don't know what's going on with my Front Row, but my music and podcasts will not play on Front Row! It's weird: my movies play, my photos from iPhoto can do slideshows. It just doesn't play music. It always says: "Front Row cannot find any songs. Use iTunes to import songs or purchase songs from the iTunes Store." I just updated my iTunes, Quicktime, and all the other computer updates. Still no luck....

Yes, there are only three or four settings stored in there. The last module selected when you closed Front Row (Music, TV Shows, Podcasts, DVD, Photos, or Movies), the country your iTunes is set for (so Front Row can show the "top rated" items from the store) and whether or not you've turned on sound effects and/or the Front Row screen saver. No other preferences are stored there. All of the media-specific preferences are store in the application that controls that media (the DVD Player.app for the DVD settings, iTunes for the Music settings and iPhoto for the Photos settings).
-Doug

Front Row Sloooooooow to play Movie Trailers....

Similar Messages

Maybe you are looking for