FTP has stopped

Hi,
I share administrator access with a few others on our 10.5.5 server. FTP was enabled and working fine, but it stopped about two weeks ago. The others who have access deny making any changes, and all seems to be set correctly- or at least how it was set-up when it was last working- but there is no longer access for users. There is a '530 login incorrect' error but the users have access. I can't connect using ftp from terminal, fireFTP or Filezilla. I can however connect usign cmd+k and AFP and all other services allow me to correctly access files. What am I missing? Thanks for any help....

Have you tried restarting ftp? Did you check your logs to see why the server daemon went down?

Similar Messages

  • FTP has mysteriously stopped working

    For some reason, FTP has suddenly stopped working on my MacBook Pro. I've tried with Cyberduck, Firefox and Camino. I've tried rebooting, and I've tried restarting the modem and router (a Time Capsule).
    I know there's nothing wrong with the remote server, *because I can use FTP fine on my MacBook on the same wifi network.*
    With Firefox I get the error:
    +426 Transfer aborted. Data connection closed.+
    With Cyberduck I get the error:
    +Read timed out.+
    The full log for Cyberduck is:
    +220 ProFTPD 1.3.0a Server ready.+
    +USER tester+
    +331 Password required for tester.+
    +PASS ******+
    +230 User tester logged in.+
    FEAT
    211-Features:
    MDTM
    +REST STREAM+
    SIZE
    +AUTH TLS+
    PBSZ
    PROT
    +211 End+
    +CWD /+
    +250 CWD command successful+
    +TYPE I+
    +200 Type set to I+
    PASV
    +227 Entering Passive Mode (209,240,132,53,7,89).+
    +RETR FILE.zip+
    +150 Opening BINARY mode data connection for FILE.zip (36911497 bytes)+
    QUIT
    +220 ProFTPD 1.3.0a Server ready.+
    +USER tester+
    +331 Password required for tester.+
    +PASS ******+
    +230 User tester logged in.+
    FEAT
    211-Features:
    MDTM
    +REST STREAM+
    SIZE
    +AUTH TLS+
    PBSZ
    PROT
    +211 End+
    +CWD /+
    +250 CWD command successful+
    +TYPE I+
    +200 Type set to I+
    PASV
    +227 Entering Passive Mode (209,240,132,53,9,234).+
    +RETR FILE.zip+
    +150 Opening BINARY mode data connection for FILE.zip (36911497 bytes)+
    QUIT

    This might be way off base but today I couldn't connect between my MacPro and my MacBook over my wireless home network. I checked under sharing on the MacBook and for some reason the AFP option under file sharing was off. I didn't turn it off. I assume SL helpfully did it for me. I've noticed a few weird things like that happening. There's an FTP option in the same area. Maybe check that out.

  • Error: "Authorware Runtime has stopped working"

    I'm trying to fix a problem our students are having with an
    instructional CD that was made by Ivy Software. I'm getting an
    error "Authorware Runtime has stopped working". I have spent a
    considerable amount of time trying to diagnose and fix this
    problem.
    So far we have been unsuccessful getting it to work on a
    Lenovo factory (OEM) HDD image. It works fine on all other PCs
    running any OS and any version of IE. I’m providing some
    links to documentation I found that may be of help with the
    diagnosis, although none of these documents have solved the
    problem. I have also noticed that the web installation, the first
    link below, for the newest version of the Authorware Player errors
    out on the Lenovo image but works on other PCs. I have put a call
    into Adobe to get the distributable installer for this updated
    version, as described in the 13295 "Technote", but I'm not holding
    my breath. The Adobe support rep. said they would mail me an FTP
    location to dl this installer, "if they can find it". :-P
    It appears that there is no installation, the entire module
    runs directly from the CD and does not install anything to the HDD.
    The files on the CD utilize the Macormedia product called
    Authorware which comes as both a development program and an add-in
    for browsers. The error message we get when we autorun the CD is
    "Authorware Runtime has stopped working". It isn't clear to me
    exactally what it is running from the CD and or from the OS when
    displaying this Macromedia Authorware software CD, since the Task
    manager shows only "start.exe" running from the CD. Start.exe shows
    it is Macromedia Authorware 7.02 in its file properties.
    Macromedia Authorware Player Download Center
    http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveAuthorware
    Authorware Web Players
    http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_15966&sliceId=1
    Troubleshooting Authorware Web Player for Windows
    http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_14720&sliceId=1
    How to install or uninstall the Authorware Web Player ActiveX
    control
    http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_13295&sliceId=1
    Any help that can be provided would be greatly appreciated.
    Sincerely, Garth

    Update:
    We fixed the problem. If we add the AW7.ini file the program
    runs fine. We created a batch file to do this automatically. Here
    are the lines in the batch file for your later use/analysis...
    @echo off
    @echo .
    @echo .
    @echo Attempting to patch your system...
    @echo [MMXTechnology] > c:\windows\A7W.ini
    @echo MMXEnableCheck=1 >> c:\windows\A7W.ini
    @echo .
    @echo .
    IF EXIST c:\windows\A7W.ini (GOTO SUCCESS)
    @echo !!!!!!!!!!!!!
    @echo PATCH FAILED
    @echo !!!!!!!!!!!!!
    @echo
    @echo PLEASE RUN THE PATCH AS ADMINISTRATOR
    @echo Click on the IVY Patch icon with your right mouse
    button.
    @echo From the menu that appears
    @echo select RUN AS ADMINISTRATOR.
    @echo
    @echo .
    @echo If you continue to have trouble, please contact
    JohnDoe:
    @echo [email protected]
    @echo (800)123-4567
    GOTO END
    :SUCCESS
    @echo PATCH APPLIED SUCCESSFULLY
    @echo You may now use the IVY Software.
    :END
    pause
    Normally, when the authorware exe file (start.exe) autoruns
    from the Ivy CD it writes the AW7.ini file to the
    "C:\Users\%UserProfile%\AppData\Roaming\Macromedia\Authorware 7"
    folder. On our systems that file does not get created. I've checked
    the permissions on the parent directories, even created these
    directories manually, and then copied the AW7.ini file to that
    location but the program still fails.
    Hope this helps someone else in the future.
    ~Garth

  • Adobe reader X has stopped working after autoupdate to 10.1.2 in windows 7 sp1 64 bits

    Hi! My PC is Windows 7 sp1 64 bits and installed adobe reader x 10.1.0 traditional chinese. Several days ago,it had been changed to new version -- 10.1.2 after autoupdate. From then on it couldn't work and clicked "adobe reader" icon in desktop then gave me a message saying "Adobe reader has stopped working",how can I do? Can every one solve it? Thanks!
    The Contents of Windows Event Viewer is under:
    System
    Provider
    [ Name]
    Application Error
    EventID
    1000
    [ Qualifiers]
    0
    Level
    2
    Task
    100
    Keywords
    0x80000000000000
    TimeCreated
    [ SystemTime]
    2012-01-16T15:48:26.000000000Z
    EventRecordID
    98171
    Channel
    Application
    Computer
    leekm-PC
    Security
    EventData
    iexplore.exe
    9.0.8112.16421
    4d76255d
    AcroRd32.dll
    10.1.2.45
    4f02f76f
    c0000005
    0011292c
    1fb8
    01ccd46646ec790b
    C:\Program Files (x86)\Internet Explorer\iexplore.exe
    C:\Program Files (x86)\Adobe\Reader 10.0\Reader\AcroRd32.dll
    86ba9536-4059-11e1-ba94-005056c00008

    Hi,
    It could be a case of a corrupt installation which could be causing the crash.
    Could you please follow, ʇɐb ɹəuəllıʍ suggestion, and uninstall the current installation of Adobe Reader 10.1.2 and restart if prompted for.
    Try and install Reader 10.1.0 again (from ftp://ftp.adobe.com/pub/adobe/reader/win/10.x/10.1.0/zh_CN/AdbeRdr1010_zh_CN.msi).
    Now update the same to 10.1.2 using the installer from http://ardownload.adobe.com/pub/adobe/reader/win/10.x/10.1.2/misc/AdbeRdr1012.msp
    Try and launch Adobe Reader post the successful installation.
    Do ensure not to launch the application during the updating process.
    Hopefully this should fix things.
    Thanks
    Ankit

  • SOA FTP Adapter stops working abruptly

    Hi All,
    I have a ftp service which provides XML file streams real-time on a remote machine. I connect to this FTP server using the SOA FTP adapter and process files by polling based on timestamp every 3 seconds.
    The issues I face are
    1) The ftp adapter stop working abruptly. Has anybody faced this issue, if yes how can this be resolved?
    2) The XML files comes to FTP location at the rate 2 files per second. Ideally I want to procss this files real-time using FTP adapter. But the backlog build is causing issues. How do I fix it?
    3) If there is any downtime in production how should the SOA FTP application be activated after restart.
    Also, what are the other FTP adapter configuration required to optimize the SOA FTP application to meet my business purpose.

    I am using SOA 11g Fusion Middleware. The error I am getting in the logs are as follows:
    [2010-10-14T15:51:49.116+11:00] [WLS_SOA] [NOTIFICATION] [] [oracle.soa.adapter] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@152f8c60] [userId: <anonymous>] [ecid: 0000Iid4Vx39xWD_n91FiZ1ChcgY00001u,0] [APP: soa-infra] [composite_name: ProcessData] [component_name: Mediator] [component_instance_id: 89E3E8C0D74E11DF8F0C9FB8AC26F197] [dcid: 46e7c258a0e5cad6:-5a895c67:12ba90f4a18:-8000-000000000000197a] FTP Adapter FetchAvlFiles Could not publish file {20101014T022558ZGA0002.xml} as endpoint has been de-activated.
    [2010-10-14T15:51:49.116+11:00] [WLS_SOA] [NOTIFICATION] [] [oracle.soa.adapter] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@152f8c60] [userId: <anonymous>] [ecid: 0000Iid4Vx39xWD_n91FiZ1ChcgY00001u,0] [APP: soa-infra] [composite_name: ProcessData] [component_name: Mediator] [component_instance_id: 89E3E8C0D74E11DF8F0C9FB8AC26F197] [dcid: 46e7c258a0e5cad6:-5a895c67:12ba90f4a18:-8000-000000000000197a] FTP Adapter FetchAvlFiles [[
    BINDING.JCA-11079
    The endpoint has been released.
    The endpoint has been released.
    The endpoint has been released, the message will not be published.
    This is a non-fatal error. No fix is required.
    at oracle.tip.adapter.file.inbound.Publisher.checkForDeactivation(Publisher.java:627)
    at oracle.tip.adapter.file.inbound.Publisher.publishMessage(Publisher.java:327)
    at oracle.tip.adapter.file.inbound.InboundTranslatorDelegate.xlate(InboundTranslatorDelegate.java:476)
    at oracle.tip.adapter.file.inbound.InboundTranslatorDelegate.doXlate(InboundTranslatorDelegate.java:118)
    at oracle.tip.adapter.file.inbound.ProcessorDelegate.doXlate(ProcessorDelegate.java:377)
    at oracle.tip.adapter.file.inbound.ProcessorDelegate.process(ProcessorDelegate.java:175)
    at oracle.tip.adapter.file.inbound.ProcessWork.run(ProcessWork.java:349)
    at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:105)
    at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:183)
    at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
    Edited by: user5108636 on 13/10/2010 23:28

  • Firefox 4 Crashes while toggling between multiple open profiles (Firefox has stopped working)

    So this problem just started occurring since I upgraded from firefox 3.6.5 to firefox4.
    Sometimes I need to have two separate firefox profiles open at the same time. This is accomplished by making a second shortcut to your firefox.exe with the switches -P NewProfileName -no-remote (e.g. "C:\Program Files (x86)\Mozilla Firefox\firefox.exe" -P new -no-remote).
    With firefox4 the second profile opens fine, but as soon as I select first profile it crashes with the windows error message "Firefox has stopped working." It doesn't send any crash reports to Mozilla, so unfortunately I can't give you any crash IDs (I checked about:crashes and there's no entries for the pertinent dates).
    I'm currently using windows vista.
    Any help would be very much appreciated.
    Thank you in advance!

    It was fixed! You'll need to either wait for Firefox 4.0.1, or if it is really bugging you, get a pre-release (nightly) version today:
    http://ftp.mozilla.org/pub/mozilla.org/firefox/nightly/latest-mozilla-2.0/
    Anything 02 April 2011 or later should work in the above directory.
    Here was the bug report that led to the fix of the problem, if interested:
    https://bugzilla.mozilla.org/show_bug.cgi?id=639885
    Crash occurred on Hulu Pogo and Blip (and other sites), but applying the pre-release April 2nd update fixes it.
    Good luck!

  • Uiadump32.exe has stopped working

    My HP DV3 running Vista Home Premium got hack by trojan. I decided to reinstall the system using recovery disk. Everything went smooth until at the end when install the software, I got the error "uiadump32.exe has stopped working". After 3 time retry, it just stop working.
    Have been googling and search in this HP support forum for a while and could not found a good resolution on this.
    I just found 1 thread said the exe may corrupted. If this case, could somebody let me know where I can download this exe?
    Thanks,

    Sometimes the new hdd requires prepping with Cyberlink Utility cd first. Download and Save the file. Once download is complete, put a blank cd in your drive and click the file to create a boot cd. Boot with this cd and wait until you get a green check mark indicating hdd is ready. Remove the cd , insert first Recovery Disk and restart the laptop.
    http://ftp.hp.com/pub/softlib/software11/COL32372/​pv-80183-1/sp44645.exe
     OR_ Scroll down on the page and get>> Bootable CD  and>> ImgBurn to burn the iso image to cd-a guide on using ImgBurn to write an ISO to a disc is> Here. Once created, boot from it. Delete any hdd partitions, create one and format. Next try booting from Recovery again.
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • The sound on my HP Pavillion DV6-6B57SA has stopped working

    The sound was working fine on my laptop up until a couple of weeks ago. It would work through headphones but any time I unplugged the headphones, the sound would not work.
    Just recently the laptop start-up sound is audible but any other sound such as music or videos cannot be heard.
    Since yesterday, the sound has stopped working completely; through the headphones or otherwise.
    I don't know what to do...

    Hi,
    Try the following.
    Download the IDT Audio installer on the link below and save it to your Downloads folder.
    http://ftp.hp.com/pub/softpaq/sp58001-58500/sp58226.exe
    When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers.  Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
    When complete, shut down the notebook, unplug the AC Adapter and then remove the battery.  Hold  down the Power button for 30 seconds.  Re-insert the battery and plug in the AC Adapter.
    Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu.  Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter.  Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
    Let Windows fully load - it will automatically load an audio driver, but just let this complete.  Then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation.  When this has completed, right click the speaker icon in the Taskbar and select Playback Devices.  Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio.
    If you still have no audio, open windows Control Panel, open Administrative Tools and open Services.  Check that the following services are all showing as Status= Started and Start-up Type= Automatic
    Audio Service
    Multimedia Class Scheduler
    Windows Audio
    Windows Audio Endpoint Builder
    If you need to make a change to any of the above, just right click the service and select Properties, then in the dropdown box next to 'Start-up type',  select Automatic and click Apply to save the change.  Then click the Start button.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • HT4890 How come I keep getting this message when I turn on my computer: 'photo stream has stopped working.' my pictures aren't saving on the cloud!

    How come I keep getting this message when I turn on my computer: 'photo stream has stopped working.' My pictures aren't being saved from my iphone to my computer.  I have wifi enabled on my iphone.  Thanks for your help.

    Firefox 2.0.0.20 is the last ever version of Firefox for Win98 / SE / ME.
    You can get it from here, but you are better off using K-Meleon (derived from Firefox) or Opera instead an old version of Firefox:
    [ftp://ftp.mozilla.org/pub/firefox/releases/2.0.0.20/win32/en-US/]
    You can try KernelEx to get Firefox 3+ to work, but it would be very slow with an old PC of less than 750Mhz. 3.5 and later supposedly doesn't work.
    http://sourceforge.net/projects/kernelex/

  • Dreamweaver sudenly stopped connecting to website, fine one day then cannot connect the next. I can connect using CUTEFTP any suggestions what has stopped dreamweaver from connecting?

    Dreamweaver suddenly stopped connecting to website, fine one day then cannot connect the next. I can connect using CUTE FTP any suggestions what has stopped Dreamweaver from connecting?

    Have you tried clearing DW's program cache yet? That's usually my first step if something "just started happening"...
    Deleting a corrupted cache file
    Server updates can cause DW to need a setting change. Have you already tried toggling Use Passive FTP in your site settings yet?
    Has anything changed on your local network, like an update to a firewall?
    If you are connected via wireless router, a low likelihood but possible thing to test would be a wireless router problem. Try connecting the computer directly to your modem, bypassing the wireless router (if you aren't using an all in one modem/router setup) to see if that makes any difference.

  • Itunes wont open and gives me a message saying "Itunes has stopped working".  What can I do to fix this?

    I use windows vista and I have upgraded my itunes.  Now when I open it, it gives me a message saying "itunes has stopped working"  and then gives me a message saying it will notify me for a solution.  What can I do to fix this so it can open and not give me any more problems???

    First you can try;
    Try restarting PC and run itunes again!
    If error again than perform clean instal of itunes (uninstal first and than instal again)!

  • Mozalloc.dll A firefox plug in container has stopped working. I can't get firefox to work for more than 2 mins. before crashing. How do I make this stop?

    AdapterDeviceID: 0x9712
    AdapterDriverVersion: 8.861.1.2000
    AdapterSubsysID: 164c103c
    AdapterVendorID: 0x1002
    Add-ons: %7B972ce4c6-7e08-4474-a285-3208198ce6fd%7D:33.1.1
    AvailablePageFile: 13967405056
    AvailablePhysicalMemory: 6222434304
    AvailableVirtualMemory: 3783245824
    BIOS_Manufacturer: Hewlett-Packard
    BlockedDllList:
    BreakpadReserveAddress: 46661632
    BreakpadReserveSize: 41943040
    BuildID: 20141113143407
    CrashTime: 1417153956
    EMCheckCompatibility: true
    EventLoopNestingLevel: 1
    FramePoisonBase: 00000000f0de0000
    FramePoisonSize: 65536
    InstallTime: 1416895140
    Notes: AdapterVendorID: 0x1002, AdapterDeviceID: 0x9712, AdapterSubsysID: 164c103c, AdapterDriverVersion: 8.861.1.2000
    D2D? D2D+ DWrite? DWrite+ D3D11 Layers? D3D11 Layers+
    ProductID: {ec8030f7-c20a-464f-9b0e-13a3a9e97384}
    ProductName: Firefox
    ReleaseChannel: release
    SecondsSinceLastCrash: 175
    StartupTime: 1417153798
    SystemMemoryUsePercentage: 25
    Theme: classic/1.0
    Throttleable: 1
    TotalPageFile: 16630353920
    TotalPhysicalMemory: 8316153856
    TotalVirtualMemory: 4294836224
    URL: https://support.mozilla.org/en-US/questions/new/desktop/fix-problems/form?search=mozalloc.dll&step=aaq-question
    Vendor: Mozilla
    Version: 33.1.1
    Winsock_LSP: MSAFD Tcpip [TCP/IP] : 2 : 1 : %SystemRoot%\system32\mswsock.dll
    MSAFD Tcpip [UDP/IP] : 2 : 2 :
    MSAFD Tcpip [RAW/IP] : 2 : 3 : %SystemRoot%\system32\mswsock.dll
    MSAFD Tcpip [TCP/IPv6] : 2 : 1 :
    MSAFD Tcpip [UDP/IPv6] : 2 : 2 : %SystemRoot%\system32\mswsock.dll
    MSAFD Tcpip [RAW/IPv6] : 2 : 3 :
    RSVP TCPv6 Service Provider : 2 : 1 : %SystemRoot%\system32\mswsock.dll
    RSVP TCP Service Provider : 2 : 1 :
    RSVP UDPv6 Service Provider : 2 : 2 : %SystemRoot%\system32\mswsock.dll
    RSVP UDP Service Provider : 2 : 2 :
    useragent_locale: en-US
    This report also contains technical information about the state of the application when it crashed.
    AND:
    A plugin container for firefox has stopped working.
    Problem signature:
    Problem Event Name: APPCRASH
    Application Name: plugin-container.exe
    Application Version: 33.1.1.5430
    Application Timestamp: 54656826
    Fault Module Name: mozalloc.dll
    Fault Module Version: 33.1.1.5430
    Fault Module Timestamp: 54654321
    Exception Code: 80000003
    Exception Offset: 00001425
    OS Version: 6.1.7600.2.0.0.256.1
    Locale ID: 1033
    Additional Information 1: 0a9e
    Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
    Additional Information 3: 0a9e
    Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
    Read our privacy statement online:
    http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409

    Try creating a new Profile by following the steps from [[Managing Profiles]] [[Troubleshooting extensions and themes]] and also [[The Adobe Flash plugin has crashed]]

  • HT1689 I can reach the iTunes Store from my iPod Touch, but it will not open on my PC running Windows 7.  Message shows that iTunes has stopped working.  This happens every time.  I have updated iTunes Software.  Will not solve the problem.  What is wrong

    I have uninstalled iTunes several times and reinstalled it on my PC running Window 7 with all updated loaded.  When I click on the iTunes Store Box, Nothing happens except for a message that reads:
              iTunes has stopped working.
    The following items give me a choice, but no answer comes up.  The computer will shut down the website.
              "Check online for a solution and close the program"
              "Close the program."
    There is an item below the box that is selectable for View problem details.  When clicked a long list of items show up.  I have listed some of the problems as written, but I do not understand them.  I know the iTunes Store has been available on earlier versions of of iTunes but is not on this version.  How can we go back and download an earlier version of iTunes?
         Here are some of the Problem Details:
         "Problem signature:  APPCRASH
         Application Name:     iTunes.exe
         Application Version:  11.0.1.12
         Application Timestamp:  50c8fc7e"

    I had this exact same problem.  I found this fix and it worked for me. 
    Step 1:
    Browse to C:\Program Files (x86)\Common Files\Apple\Apple Application Support and copy the filen named QTMovieWin.dll. 
    Step 2:
    Browse and past that file into C:\Program Files (x86)\iTunes.
    Hope this helps you.  I wish I could remember where I saw this originally so I could thank them.
    Good Luck.
    Anthony

  • Can't get itunes.  I get the following message when I click on either the shortcut or the program.  It says ITunes has stopped working and I can either check on line for a solution and close the program or just close the program.

    When I click on the itunes shortcut or the program  I get the following message:
    ITunes has stopped working.  My two options are:  Windows can check on line for a solution to the problem or close the program. 
    It seems that my entire library is not there.  If I sync my ipod will it add it back into my library on the computer? 
    I've even tried installing again and nothing works.  Tried the "repair" and it says that ITunes is loaded but I stil get the above error when I try to open the program.
    Thanks

    Let's try the following user tip with that one:
    iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows

  • When I click on any of my movie or TV shows in Itunes I immediately get an error message that says Itunes has stopped working and closes the program. I can sync the movies and shows to my phone okay but I can't watch on Itunes. Can anyone help?

    When I click on any of my movie or TV shows in Itunes I immediately get an error message that says Itunes has stopped working and closes the program. I can sync the movies and shows to my phone okay but I can't watch on Itunes. Can anyone help?

    Let's try the following user tip with that one:
    iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows

Maybe you are looking for

  • Why does Itunes stutter when using AE on a wired network?

    Itunes stutters badly when I try to use AE with remote speakers. I am running on an older PC with 512 RAM and a Penitum 4 2.6 GHz Chip. All my Apple Itunes software and firmware is up to date. I have already gone to Quicktime and am now using Safe Mo

  • Why is firefox crashing when I try to compose/reply a new message?

    I have recently been having a problem with my Macbook Pro.  When I open Firefox or Safari and try to compose a new message or reply to a message through my hotmail account, both browers crash.  I cleared my cache and cookies.  No change.  Any suggest

  • Cannot find metadata values in workflow queue

    I need some help customizing workflow action menues in WF_INQUEUE_LIST. What I´m trying is show actions depending on a customized metadata value. I´m able to put certain javascript code in order to modify standard behavior if conditions involve workf

  • How to Install Consolidator for 8ilite

    Hello everybody, it's me again if someone tell me how to install the iconnect consolidator on windows 98 I will appreciate that. Thanks Tahir

  • Find/change dialogue box in indesign CC

    Last week, i pasted a full sentence in the "change to" dialogue, and since then the entire find/change box has increased in size, taking up approximately 2/3 of the width of my screen. there is no obvious way to manipulate the shape or size of this d