FTP ReceiverChannel and OS commands help

Hi,
I'm trying to execute an Operating System Command after processing.
I want to move *.dat files from the "ccc" Folder to the temp folder on the FTP server.
The command line looks like this "move \ccc\*.dat \temp"
Can any one help.
Live long and prosper
Frank Hinrichsen

I have an Receiver FTP adapter.
After Message Processing,I would like to move the file on the FTP server.
Under "Run Operating System Command After Message Processing" in the command line I write
<b>"ftp rename /Folder/filename.xml /newFolder/filename.xml"</b>
I think this is the right syntax.
I'm using permanently connection. so there should be no login issues.
But the rename on the FTP server is not done. The User is autorized to execute the rename command.
I have succesfully used the above command in DOS prompt.
Hope this makes my problem clear to you .
Regards Frank

Similar Messages

Need help with a simple process with FTP Adapter and File Adapter

I am trying out a simple BPEL process that gets a file in opaque mode from a FTP server using a FTP adapter and writes it to the local file system using a File Adapter. However, the file written is always empty (zero bytes). I then tried out the FTPDebatching sample using the same FTP server JNDI name and this work fine surprisingly. I also verified by looking at the FTP server logs that my process actually does hit the FTP server and seems to list the files based on the filtering condition - but it does not issue any GET or RETR commands to actually get the files. I am suspecting that the problem could be in the Receive, Assign or Invoke activities, but I am not able identify what it is.
I can provide additional info such as the contents of my bpel and wsdl files if needed.
Would appreciate if someone can help me with this at the earliest.
Thanks
Jay

persiandude wrote:
Topic: Need help with if, else, and which statements and loops.
How would I display 60 < temp. <= 85 in java
System.out.println("60 < temp. <= 85 in java");
another question is how do I ask a question like want to try again (y/n) after a output and asking that everytime I type in yes after a output and terminate when saying No.Sun's [basic Java tutorial|http://java.sun.com/docs/books/tutorial/]
Sun's [New To Java Center|http://java.sun.com/learning/new2java/index.html].Includes an overview of what Java is, instructions for setting up Java, an intro to programming (that includes links to the above tutorial or to parts of it), quizzes, a list of resources, and info on certification and courses.
[http://javaalmanac.com|http://javaalmanac.com]. A couple dozen code examples that supplement [The Java Developers Almanac|http://www.amazon.com/exec/obidos/tg/detail/-/0201752808?v=glance].
jGuru. A general Java resource site. Includes FAQs, forums, courses, more.
JavaRanch. To quote the tagline on their homepage: "a friendly place for Java greenhorns." FAQs, forums (moderated, I believe), sample code, all kinds of goodies for newbies. From what I've heard, they live up to the "friendly" claim.
Bruce Eckel's [Thinking in Java|http://mindview.net/Books/DownloadSites] (Available online.)
Joshua Bloch's [Effective Java|http://www.amazon.com/Effective-Java-2nd-Joshua-Bloch/dp/0321356683/ref=pd_bbs_1?ie=UTF8&s=books&qid=1214349768&sr=8-1]
Bert Bates and Kathy Sierra's [Head First Java|http://www.amazon.com/exec/obidos/tg/detail/-/0596004656?v=glance].
James Gosling's [The Java Programming Language|http://www.bookpool.com/sm/0321349806].

I can't play wmv files on my mac. I've downloaded Flip4Mac and set as the default player by clicking on a wmv file in Finder and clicking Command I. Nothing is working, Help please.

I've downloaded Flip4Mac and set as the default player by clicking on a wmv file in Finder and clicking Command I. Nothing is working, Help please.

Limnos,
Thanks for your reply. I tried that too and it still doesnt work. When I click on the wmv file it opens up in a new browser page. There is sound but no video.
Thank you

The FTP function in Dreamweaver CS5 has suddenly stopped working. My ISP just had to upgrade their FTP servers and they said it was no longer compatible with the FTP in Dreamweaver CS5! Help!!

Is there any update to Dreamweaver CS5 that will allow the FTP function to be compatible with the new FTP server protocol? Please help. Will I need to upgrade to CS6?

Ask in the DW forum and be much more specific about the requirements for your FTP connection like its ports, TLS settings and so on.
Mylenium

I need to burn a cd from itunes. There is no burn option...at all. I've tried right-clicking and file command. Please help

I need to burn a cd from itunes. There is no burn option...at all. I've tried right-clicking and file command. Please help

I have Windows 7 on a Dell. Open and play iTunes in the compatability mode and use Windows XP (service pack 2). Disregard any messsages to disable the compability mode. This has worked for me. I have also reinstalled iTunes and played with burn speeds etc. These ideas did not work. Compatability mode works.

FTPS Sender and FTPS Receiver adapter. Pls help

Hi All,
I need to make file to file scenario with secure connection
I am using FTP Sender and Receiver Adapter with Connectivity
as FTPS.
Please let me know the steps I need to do for this
1. Integration Directory
2. If I need to generate certificates what steps I need to do:
    a. How to generate certificates
    b. Where to install these certificates like File Servers, XI
        Server etc.
3. How to use these certificates in File Server, Integration
   Directory etc.
Please send me a document to do all steps.
In advance thanks and Full Points will be awarded.
Regards

Hi,
Deploy SAP Java Cryptographic Toolkit.&
Add the CA certificate to the key storage as below.
Keystore: service_ssl
X.509 Certificate & Private Key: ssl-credentials
This means that you need to import the CA hierarchy of your FTPs server certificate into the list of trusted CA's in XI ( either on J2EE side in the keystore service or in ABAP side via transaction STRUST , depending on where your client is ).
If connection security parameter in communication channel for Sender FTP Adapter is set to "FTPs( FTP Using SSL/TLS) with Control Connection" only, file gets successfully created with data at the FTP server but as soon as we switch the connection security parameter to "FTPs( FTP Using SSL/TLS) with Control and Data Connection".The initial handshaking happens successfully and file gets created at the FTP Server but its empty, connection fails when attempt is made to write data into file and we end up with said error thereby closing the connection.
SAP Note 821267
Refer below link
SAP Network Blog: SFTP vs. FTPS in SAP PI
/people/krishna.moorthyp/blog/2007/07/31/sftp-vs-ftps-in-sap-pi
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/400580c1-8d16-2a10-3eb3-ec1026dae0d5

FTP : 502 Illegal PORT Command

I'm developing a simple ftp client from the socket level , the program runs just fine in Solaris but not in the window XP. As the program sent a "PORT 10,100,151,180,5,201" to the ftp server (a Solaris) then I get the "502 Illegal PORT Command" reply. This won't happen when it is in Solaris. The ftp provided by win XP works just fine in the same pc. what's wrong with my ftp client program ?
Pls help
Samuel

In terms of the Airport Extreme, is the Mac Mini Server currently set to the default host? If the Mac Mini Server is not currently set to the default host, this needs to be configured as such.
To set up the Mac Mini Server as the default host on the Airport Extreme:
1 Open AirPort Utility, select your wireless device, and then choose Manual Setup from the Base Station menu, or double-click the device icon to open its configuration in a separate window. Enter the password if necessary.
2 Click the Internet button, and then click NAT.
3 Select the “Enable Default Host at” checkbox if not already checked.
4 Enter the same IP address of the Mac Mini Server.
This works

Ftp connection and Dreamweaver

Hi everyone,
I was all day long reading the posts in this forum and Adobe's about ftp connection issues with Dreamweaver. Hope somebody else has a new idea or experience to help me.
I have been working and updating 3 websites (different servers) with Dreamweaver 8 with no problem until yesterday. I'm pretty sure I didn't change any settings of my firewall or dreamweaver. But since yesterday I couldn't connect to just ONE of my websites. I always get the message: "Dreamweaver could not connect to the server. User canceled. Operation time out".
It's odd because when I "test" the connection on "remote settings" it does work. But when I try to only upload any file it doesn't.
So, I report to the server and it was not a problem with them. I tried to connect by ftp in Firefox and worked. So I realize it could be something with my ftp connection.
I tried to turn off my firewall, but still not working.
I tried to test the TCP/IP port 21 (and it is open).
I tried to delete the site definitions from Dreamweaver and re-create again, but no luck.
I just didn't re-install Dreamweaver because I'm afraid to lose the connection with my other 2 sites.
Does anybody have any tip, or link with similar issue that I can get some turn around???
Please any help would be appreciated.
Thanks
Viv
MacBookPro2,2 Mac OS X (10.4.9)

But I don't understand why I get ftp connection with
2 websites and just one is not working??? should this
be happening if it was a "port" problem???
I can help clarify this. With FTP, there are TWO connections. The first is the control connection, and that occurs on port 21. This is where the authentication takes place, and where commands are passed from cliet to server.
The second connection is the data connection. This is where the transfer of data takes place (including a directory listing). There are two basic ways of establishing this connection, active and passive. In an active connection the server attempts to open a socket from port 20 to a random port on the client. This is the connection which is blocked by firewalls.
In passive mode, the server sends back a port number that it (or rather a child) is listening on. The client connects to the server on that port, and receives data. The problem is, that while this is happening, the control connection is idle. This may cause the control connection (and thus the entire protocol) to time out.
So there are quite a few things that can go wrong. If your server only supports active mode and you have a firewall which blocks its incoming connection, eventually the control connection will time out. If your server is load-balancing, or your router tries to recylcle ide connections, the control connection may be shut down. I don't know what's happening in your case, but I can tell you what may be happening with your ports. HTH.

Ftp - ftpd and firewall configuration for passive connections

I set up ftpd on my imac. Connecting and logging on work ok, but when I try to get a directory listing or xfer or send multiple commands it always locks up, i get a message "421 Service not available, remote server timed out. Connection closed" and I see that the ftpd process for that connection has terminated.
Turning the firewall completely off allows ftpd to work correctly, but I was under the impression that if I check the "FTP Access" box under services, the firewall should CORRECTLY self-configure to allow connections to ftpd. Opening ports 1024-65535 guarantees that ftpd will work with a client's passive connection, but is there a better way?
I tried opening 20 for the data connection and 21 for control, but unless I tell everyone to use an active connection, there is still a long wait before most ftp clients notice that passive isn't working and switch to an active connection, so I would like to avoid that also.

Hi, we use FTPd (with Pure FTPd Manager) on our internal server here. While I'm not a complete expert, I do know that we were able to get passive FTP working only after we got this setup properly.
The main reason we got this was for it's ability to set a default port range for passive FTP to work on. In Pure FTPd Manager, you go to Preferences/Settings and you will see the area to input your passive port range (we use 51000-51100).
Then you just need to forward those ports (on a router) to your FTP server, and/or open those ports on your server firewall.
It sounds like you already have ports 20-21 setup.
Hope this helps!
G5 Dual 2Ghz Mac OS X (10.4) 1.5GB RAM

Install a FTP Server and GUI on Solaris 2.5.1.

Hi All.
I have two questions.
1. What i have to do to install a FTP server on the installed Solaris 2.5.1 ?
2. How can i install GUI on the same system ?
I've installed Solaris on the Sparc Station, but, by default, the GUI was not installed
on it.
And now, when i turn on the power, i see only the command promt on the screen.
How can i fix this "bug":-)
Help me if you can.
Thanks.

1) The Sun provided FTP server should already be installed on the system unless the machine has been installed using a minimal install cluster. You might consider using something like ProFTPd. This is a VERY configuration FTP server and is a much better FTP server then the FTPd that comes with Solaris 2.5.1. See http://www.proftpd.org for more info.
2) This is isn't a bug its actually a requirement for most people for servers in production or even development environments. The X "GUI" chews up a not insignificant amount of memory and proposes a security risk. To reactivate the GUI for startup at boot time, run this as root:
/usr/dt/bin/dtconfig -e
This of course assumes all the expected CDE/OpenWindows packages are available on the system. I haven't used CDE in years but I think you need to reboot the system to get CDE to startup correctly and grab the console. Not sure if starting it up while you are logged into the console will work.
P.S. CDE is a PPPIIIGGGG. Run something respectible like Fluxbox or Blackbox. Heck, Gnome and KDE are pigs too but they are still better then CDE - twm is better then CDE LOL :)
3) You said "I've installed ..." - I assume this means recently. You might consider upgrading to a more recent release of Solaris. Solaris 2.5.1 is rather "out of date" - this is not troll bait folks.

Pick the file from FTP Server and place it on the App. Server of R/3

Hi Guys,
I had a requirement where i need to pick the file from the FTP Server and place it on the Application Server in R/3. If anybody has an Idea on acheiving this or if anybody has the piece of Code Snippet to acheive the same, Help me out.
Regards,
Kittu Chowdary.

hi kittu,
chk the demo programs RSFTP00* if they can help u

Problem with "SELECT...FOR UPDATE OF..." and "POST command" combination

Problem with "SELECT...FOR UPDATE OF..." and "POST command" combination
Problem in committing transactions in Multiple Forms (Oracle Forms) with POST built-in command:
Consider that the following statements are written in WHEN-WINDOW-CLOSED trigger of a called form.
Statements in called form (Form name: FORM_CHILD):
go_block('display_block') ;
do_key('execute_query') ;
-- Data from table_b will be populated in this block, based on the value of COLUMN_1 obtained
-- from TABLE_A.
-- Example: If the value of COLUMN_1 is 10, then all the matching records from TABLE_B, which
-- are inserted with value 10 in TABLE_B.COLUMN_1 will be fetched and shown here.
if user_choice = 'YES' then
commit ;
else
rollback ;
end if ;
Statements in calling forms:
There are two calling forms having following statements and it is going to call the above said called form.
CALLING FORM 1
Statements in KEY-COMMIT trigger:
post;
call_form(form_child, no_activate) ;
Statements in ON-INSERT trigger:
select column_1
from table_a
for update of column_1
where column_2 = 'X' ;
update table_a
set column_1 = column_1 + 1
where column_2 = 'X' ;
insert into table_b ...;
insert into table_b ...; Statements in KEY-COMMIT trigger:
post;
call_form(form_child, no_activate) ;
CALLING FORM 2:
Statements in ON-INSERT trigger:
select column_1
from table_a
for update of column_1
where column_2 = 'X' ;
update table_a
set column_1 = column_1 + 1
where column_2 = 'X' ;
insert into table_b ...;
insert into table_b ...;
insert into table_b ...;
Our understanding:
Assume that both the forms are running from two different machines/instances, issuing commit at the same time. In this case, forms will start executing the statements written in ON-INSERT trigger, the moment POST command is executed. Though the commit is issued at the same time, according to oracle, only one of the request will be taken for processing first. Assume that calling form 1 is getting processed first.
So, it fetches the value available in COLUMN_1 of TABLE_A and locks the row from further select, update, etc. as SELECT...FOR UPDATE command is used (note that NOWAIT is not given, hence the lock will be released only when COMMIT or ROLLBACK happens) and proceed executing further INSERT statements. Because of the lock provided by the SELECT...FOR UPDATE command, the statements in calling form 2 will wait for the resource.
After executing the INSERT statements, the FORM_CHILD is called. The rows inserted in to TABLE_A will be queried and shown. The database changes will be committed when user closes the window (as COMMIT is issued in its WHEN-WINDOW-CLOSED trigger). Then the SELECT...FOR UPDATE lock will be released and calling form 2's statements will be executed.
Actual happenings or Mis-behavior:
Calling form 2 starts executing INSERT statements instead of waiting for SELECT...FOR UPDATE lock. Also, the value selected from TABLE_A.COLUMN_1 is same in both the calling forms, which is wrong.
The rows inserted into TABLE_B are having similar COLUMN_1 values in calling form 2 and they are fetched and shown in the called form FORM_CHILD.
Note that in calling form 2 also POST only is issued, but the changes posted there are accessible in calling form 1 also, which is wrong.
Kindly suggest us as to how to fix above problem. It will be much use, if you can send us the information regarding the behavior of Oracle Forms POST built-in also.
Our mail ID: [email protected]
Thanks a lot in advance.

You have several problems:
1. On-Insert will ONLY run if you have created a new record in a base-table block. If you haven't done that, then the POST command will not cause it to run.
2. Select for update without a "no wait" will lock records for the first form, but when the second form tries this, it will hit the ORA-00054 exception, and will NOT wait. The only way you could make it wait is to issue an UPDATE sql command, which is not such a good way to go.
All POST does is issues SQL insert or update commands for any changes the user has made to records in a form's base-table blocks, without following with a Commit command.
Also understand that Commit is the same as Commit_Form, and Rollback is the same as Clear_Form. You should read up on these in the Forms help topics.

How to connect to an FTP server via Midnight Commander _User_Menu_?

Hi everyone.
There's a nifty command that works in MC and makes it connect to an FTP server and display its directories just as if they were local ones: cd ftp://USER_LOGIN@SERVER_NAME. The only thing it asks for is a password, obviously. That's exactly what i'm looking for, theoretically.
I know it's not really a standard Bash command, because if invoked outside MC, it returns an error (directory not found).
I got kind of tired of typing it in (or copypasting it) every time, so i thought why not make it automatic? A Bash alias or a shell script wouldn't work, because as i said, it's not really a bash command.
But what surprised me was that it didn't work as an entry in MC's menu, too.
Tried to go another way, discovered kftp, apparently it's completely not what i am looking for.
And i didn't even understand what F9 > Left > FTP Link in MC did. It isn't automatic as well anyway, i have to type everything in manually.
Can anyone advise how to automate FTP connection in MC, or even in Bash (so that MC just treats it like a regular directory)?
Big thanks in advance.
Last edited by kiruch (2010-07-04 20:53:44)

kiruch wrote:mcsilva, here are the contents of my ~/.netrc file: machine ftp.0fees.net login MYLOGIN password MYPWD
When i invoke cd ftp://ftp.0fees.net, it tells me bash: cd: ftp://ftp.0fees.net: No such file or directory
This is not the correct way. You are using bash command line. For this to work it must be:
# mc cd ftp://ftp.0fees.net
kiruch wrote:When i invoke it as an entry of MC's menu (what i'm aiming for), i get /tmp/mc-cyril/mcusr6BWdYd: line 2: cd: ftp://ftp.0fees.net: No such file or directory - well, basically the same.
I don't know what do you mean by "invoke an entry of MC's menu",
Is this:
Left->FTP link or Right->FTP link ?
kiruch wrote:And finally, if i type cd ftp://ftp.0fees.net manually into MC's command prompt, i get a red alert message that says Cannot chdir to "ftp://ftp.0fees.net". Input/output error (5)
In the first post you said you were able to login with "cd ftp://USER_LOGIN@SERVER_NAME", so MC is working well.
This error you showed is the same which I have when I type "cd ftp.0fees.net" in the MC command prompt (maybe you typed wrong...)
Instead, when I try "cd ftp://ftp.0fees.net" the popup error is: "ftpfs: Login incorrect for user anonymous"
This is what I expected, because I don't have the username and password and I'm trying a anonymous login.
Are you sure your typing is right? Please, check your typing and try again.

Windows 7 on Bootcamp I am locked into a DOS screen and it is not installing. I have been on line with Apple and microsoft and they can't help. I have lated versions of Lion and bootcamp. HELP

I ran bootcamp and tried to install Windows 7. I end up with a DOS screen and an unresponsive keyboard.
I have been on line with Apple and microsoft and they can't help. I have lated versions of Lion and bootcamp. HELP!
My Lion is up to date.
I used the 64-bit windows disc.
Should I try parallels?

Do you have a DOS screen with a command prompt or just a blank screen?
Is your Windows 7 x64 an original MS Full Version Installation DVD?
Did Windows 7 Install Disc start?
If it did you would have had to choose the location of where to install Windows 7.
Did you select the Partition named BOOTCAMP that corresponded to the Partition Size you created in BootCamp?
Were you asked to format the Partition?
Did you format the partition to NTFS and then get an option to click NEXT and actually start the Windows 7 installation?
Do you have a wired USB keyboard and wired USB mouse?
If you actual went through the installation and restarted then here are some things to try:
First try doing a CONTROL-ALT-DELETE and see if a Windows Option Screen appears.
If you get the Screen you will have some options displayed.
You want to highlight and click TASK MANAGER which should be the bottom choice I beleive.
If Task Manager runs you will get a window showing all the processes running.
See if you can find EXPLORER.
If EXPLORER is running highlight it and go to the bottom right and click the END TASK button.
Now go to the Top Left Menu Bar.
Click FILE
In the sub menu that opens select RUN or RUN NEW TASK (Not sure which it is in Windoes 7 as I am running Windows 8)
Once RUN is selected a new window will open to CREATE NEW TASK
Type in EXPLORER and then the OK button.
If Windows 7 installed properly the Desktop should appear after a bit of time.
Your first concern is to get your keyboard running so you may have to remove and reinstall Windows using Boot Camp on the Mac Side.
Let us know how it goes..

FTP put and get

When using FTP put and get to transfer files, the program does not go into passive mode. My website requires the following sequence of commands: TYPE A, PORT, PASV, RETR or STOR filename.
Please update Windows FTP for XP & Windows 7 and later or provide me with the means of using raw FTP commands in my programs.

Hello ray.crwfrd,
Please explain a bit about the requirement in case of misunderstanding.
What do you mean about the sentence ‘update Windows FTP for XP & Windows 7’?
The following article is about the means of raw FTP command.
http://www.nsftools.com/tips/RawFTP.htm
Please note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

FTP ReceiverChannel and OS commands help

Similar Messages

Maybe you are looking for