FTP upload problems in CS3

I'm using CS3 and have multiple sites w/ different servers,
so I know this is not a server issue, as the problem happens with
all of my sites. I know my FTP settings are correct as I've been
using them for ages and haven't changed them. Starting yesterday,
when I synchronize the local sites w/ the remote sites, everything
works fine. But when I try to put just the index files, I get this
type of error message:
index.html - Put operation successful
mm_spacer.gif - same - not transferred
FPlogo.jpg - same - not transferred
transparent.gif - same - not transferred
ppalogo.png - same - not transferred
palogo.png - same - not transferred
Aug08cover.jpg - same - not transferred
davincissm.png - same - not transferred
amtalentsm.jpg - same - not transferred
coverkids.jpg - same - not transferred
vadentalsm.jpg - same - not transferred
kidsnclay.jpg - same - not transferred
Almy150.png - same - not transferred
stc2.png - same - not transferred
youngchefs.png - same - not transferred
fusionhealth.png - same - not transferred
wgrq.png - same - not transferred
Thunder_new.jpg - same - not transferred
I can put each one of those image files individually or
during a site synchronization, but not as part of the index file.
What happened and how can I fix it?

I have just resolved my Dreamweaver FTP problem.
For me, it was because Eset (Nod32) was interfering with
uploading. If you have Nod32 protection, try this (if not, I'll
have another method after):
To fix, open ESET Set-Up (via the full tree) and scroll down
to Personal Firewall > Protocol Filtering >
In Protocol Filtering, un-check the Enable application
protocol content filtering option.
The other way to find out what might be interfering with your
Dreamweaver's ftp function is turn off all but criticle services
within your System Configuration (run> msconfig; or Ctrl R).
FIRST, however, make a note of what items are checked on and that
are not. Now...
Select the Services Tab.
Click "Hide all Microsoft Services"
Click "Disable all" (but leave on FlexNet Licencing Service,
along with your fingerprint reader access--if you have it)
Click OKAY.
Restart your system.
If Dreamweaver FTP works, then you'll need to go back into
MSCONFIG and systematically re-apply services that are not messing
with your Dreamweaver. You should eventually isolate the problem
this way.
Lastly, Adobe has a tech article on Dreamweaver. Go to
http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_15481&sliceId=1
That's all I know for now. Good luck.

Similar Messages

Help with ftp upload problem

Hi I am using a ftp class (known as FTPConnection) that i found on this site: http://www.nsftools.com/tips/JavaFtp.htm , and they only have an example of how to download a File through FTP and not upload one. I am in the proccess of making an FTP upload applet, and need some help on getting upload to work. I also need it to work on both a Pc and mac, so that may be attributing to the problem becuase i am currently on a mac which uses file:// instead of C:\\. Ill post the ftp class, and a snippet of my code that tries to upload a selected file.
FTPConnection
/*  <pre> */
* File: FTPConnection.java
* Author: Bret Taylor <[email protected]>
* URL: http://www.stanford.edu/~bstaylor/cs/ftpconnection/FTPConnection.java.shtml
* see also <a href="http://www.nsftools.com/tips/JavaFtp.htm">http://www.nsftools.com/tips/JavaFtp.htm</a>
* $Id$
* Parts of this code were adopted from a variety of other FTP classes the
* author has encountered that he was not completely satisfied with. If you
* think more thanks are due to any particular author than is given, please
* let him know. With that caveat, this class can be freely distributed and
* modified as long as Bret Taylor is given credit in the source code comments.
* Modified by Julian Robichaux -- http://www.nsftools.com
* Added constructors, logout(), listFiles(), listSubdirectories(), getAndParseDirList(),
* processFileListCommand(), and overloaded getFullServerReply().
* Also added StringBuffer parameter options to transferData() and executeDataCommand()
* and did a few other little things.
import java.io.*;
import java.net.*;
import java.util.*;
* A wrapper for the network and command protocols needed for the most common
* FTP commands. Standard usage looks something like this:
* <pre> FTPConnection connection = new FTPConnection();
* try {
* if (connection.connect(host)) {
* if (connection.login(username, password)) {
* connection.downloadFile(serverFileName);
* connection.uploadFile(localFileName);
* connection.disconnect();
* } catch (UnknownHostException e) {
* // handle unknown host
* } catch (IOException e) {
* // handle I/O exception
* }</pre>
* Most FTP commands are wrapped by easy-to-use methods, but in case clients
* need more flexibility, you can execute commands directly using the methods
* <a href="#executeCommand(java.lang.String)">executeCommand</a> and
* <a href="#executeDataCommand(java.lang.String,
* java.io.OutputStream)">executeDataCommand</a>,
* the latter of which is used for commands that require an open data port.
* @author Bret Taylor
* @author Julian Robichaux
* @version 1.01
public class FTPConnection extends Object {
 * If this flag is on, we print out debugging information to stdout during
 * execution. Useful for debugging the FTP class and seeing the server's
 * responses directly.
 private static boolean PRINT_DEBUG_INFO = false;
 * The socket through which we are connected to the FTP server.
 private Socket connectionSocket = null;
 private String username;
 private String password;
 private String host;
 * The socket output stream.
 private PrintStream outputStream = null;
 * The socket input stream.
 private BufferedReader inputStream = null;
 * The offset at which we resume a file transfer.
 private long restartPoint = 0L;
 * Added by Julian: If this flag is on, we're currently logged in to something.
 private boolean loggedIn = false;
 * Added by Julian: This is the line terminator to use for multi-line responses.
 public String lineTerm = "\n";
 * Added by Julian: This is the size of the data blocks we use for transferring
 * files.
 private static int BLOCK_SIZE = 4096;
 * Added by Julian: After you create an FTPConnection object, you will call the
 * connect() and login() methods to access your server. Please don't forget to
 * logout() and disconnect() when you're done (it's only polite...).
 public FTPConnection ()
 // default constructor (obviously) -- this is just good to have...
 * Added by Julian: Allows you to specify if you want to send debug output to
 * the console (true if you do, false if you don't).
 public FTPConnection (boolean debugOut)
 PRINT_DEBUG_INFO = debugOut;
 public FTPConnection (String user, String pw, String host_)
 username=user;
 password=pw;
 host=host_;
 PRINT_DEBUG_INFO = false;
 * Prints debugging information to stdout if the private flag
 * <code>PRINT_DEBUG_INFO</code> is turned on.
 private void debugPrint(String message) {
 if (PRINT_DEBUG_INFO) System.err.println(message);
 * Connects to the given FTP host on port f, the default FTP port.
 public boolean connect(String host)
 throws UnknownHostException, IOException
 return connect(host, 21);
 * Connects to the given FTP host on the given port.
 public boolean connect(String host, int port)
 throws UnknownHostException, IOException
 connectionSocket = new Socket(host, port);
 connectionSocket.setSoTimeout(10000);
 outputStream = new PrintStream(connectionSocket.getOutputStream());
 inputStream = new BufferedReader(new
 InputStreamReader(connectionSocket.getInputStream()));
 if (!isPositiveCompleteResponse(getServerReply())){
 disconnect();
 return false;
 return true;
 * Disconnects from the host to which we are currently connected.
 static boolean URLexists(String URLName)
 try
 HttpURLConnection.setFollowRedirects(false);
 // note : you may also need
 // HttpURLConnection.setInstanceFollowRedirects(false)
 HttpURLConnection con =
 (HttpURLConnection) new URL(URLName).openConnection();
 con.setRequestMethod("HEAD");
 return (con.getResponseCode() == HttpURLConnection.HTTP_OK);
 catch (Exception e)
 e.printStackTrace();
 return false;
 public String getSimpleFileName(File f)
 String path=f.getPath();
 String fileName=path.replace("\\", "/");
 int slashPos = fileName.lastIndexOf("/");
 fileName=fileName.substring(slashPos+1);
 return fileName;
 public String verifyFileName(String name)
 int count=0;
 //String url="http://chris-malcolm.com/images/"+URLEncoder.encode(name).replace("+", "%20");
 while (URLexists("http://chris-malcolm.com/images/"+URLEncoder.encode(name).replace("+", "%20"))==true)
 count++;
 name=FileExt(name)[0]+"-"+count+"."+FileExt(name)[1];
 return name;
 public String[] FileExt(String fileName)
 int dotPos = fileName.lastIndexOf(".");
 fileName=fileName.replace("\\", "/");
 int slashPos = fileName.lastIndexOf("/");
 String extension, name;
 if (slashPos==fileName.length()-1)
 fileName=fileName.substring(0, fileName.length()-1);
 slashPos=fileName.lastIndexOf("/");
 extension="/";
 name=fileName.substring(slashPos+1);
 else if(dotPos==-1)
 name=fileName.substring(slashPos+1);
 extension="";
 else
 extension = fileName.substring(dotPos+1);
 name=fileName.substring(slashPos+1, dotPos);
 String[] output={name, extension};
 return output;
 String[] output={name, extension};
 return output;
 public void disconnect()
 if (outputStream != null) {
 try {
 if (loggedIn) { logout(); };
 outputStream.close();
 inputStream.close();
 connectionSocket.close();
 } catch (IOException e) {}
 outputStream = null;
 inputStream = null;
 connectionSocket = null;
 * Wrapper for the commands <code>user [username]</code> and <code>pass
 * [password]</code>.
 public boolean login(String username, String password)
 throws IOException
 int response = executeCommand("user " + username);
 if (!isPositiveIntermediateResponse(response)) return false;
 response = executeCommand("pass " + password);
 loggedIn = isPositiveCompleteResponse(response);
 return loggedIn;
 * Added by Julian: Logout before you disconnect (this is good form).
 public boolean logout()
 throws IOException
 int response = executeCommand("quit");
 loggedIn = !isPositiveCompleteResponse(response);
 return !loggedIn;
 * Wrapper for the command <code>cwd [directory]</code>.
 public boolean changeDirectory(String directory)
 throws IOException
 int response = executeCommand("cwd " + directory);
 return isPositiveCompleteResponse(response);
 * Wrapper for the commands <code>rnfr [oldName]</code> and <code>rnto
 * [newName]</code>.
 public boolean renameFile(String oldName, String newName)
 throws IOException
 int response = executeCommand("rnfr " + oldName);
 if (!isPositiveIntermediateResponse(response)) return false;
 response = executeCommand("rnto " + newName);
 return isPositiveCompleteResponse(response);
 * Wrapper for the command <code>mkd [directory]</code>.
 public boolean makeDirectory(String directory)
 throws IOException
 int response = executeCommand("mkd " + directory);
 return isPositiveCompleteResponse(response);
 * Wrapper for the command <code>rmd [directory]</code>.
 public boolean removeDirectory(String directory)
 throws IOException
 int response = executeCommand("rmd " + directory);
 return isPositiveCompleteResponse(response);
 * Wrapper for the command <code>cdup</code>.
 public boolean parentDirectory()
 throws IOException
 int response = executeCommand("cdup");
 return isPositiveCompleteResponse(response);
 * Wrapper for the command <code>dele [fileName]</code>.
 public boolean deleteFile(String fileName)
 throws IOException
 int response = executeCommand("dele " + fileName);
 return isPositiveCompleteResponse(response);
 * Wrapper for the command <code>pwd</code>.
 public String getCurrentDirectory()
 throws IOException
 String response = getExecutionResponse("pwd");
 StringTokenizer strtok = new StringTokenizer(response);
 // Get rid of the first token, which is the return code
 if (strtok.countTokens() < 2) return null;
 strtok.nextToken();
 String directoryName = strtok.nextToken();
 // Most servers surround the directory name with quotation marks
 int strlen = directoryName.length();
 if (strlen == 0) return null;
 if (directoryName.charAt(0) == '\"') {
 directoryName = directoryName.substring(1);
 strlen--;
 if (directoryName.charAt(strlen - 1) == '\"')
 return directoryName.substring(0, strlen - 1);
 return directoryName;
 * Wrapper for the command <code>syst</code>.
 public String getSystemType()
 throws IOException
 return excludeCode(getExecutionResponse("syst"));
 * Wrapper for the command <code>mdtm [fileName]</code>. If the file does
 * not exist, we return -1;
 public long getModificationTime(String fileName)
 throws IOException
 String response = excludeCode(getExecutionResponse("mdtm " + fileName));
 try {
 return Long.parseLong(response);
 } catch (Exception e) {
 return -1L;
 * Wrapper for the command <code>size [fileName]</code>. If the file does
 * not exist, we return -1;
 public long getFileSize(String fileName)
 throws IOException
 String response = excludeCode(getExecutionResponse("size " + fileName));
 try {
 return Long.parseLong(response);
 } catch (Exception e) {
 return -1L;
 * Wrapper for the command <code>retr [fileName]</code>.
 public boolean downloadFile(String fileName)
 throws IOException
 return readDataToFile("retr " + fileName, fileName);
 * Wrapper for the command <code>retr [serverPath]</code>. The local file
 * path to which we will write is given by <code>localPath</code>.
 public boolean downloadFile(String serverPath, String localPath)
 throws IOException
 return readDataToFile("retr " + serverPath, localPath);
 * Wrapper for the command <code>stor [fileName]</code>.
 public boolean uploadFile(String fileName)
 throws IOException
 return writeDataFromFile("stor " + fileName, fileName);
 * Wrapper for the command <code>stor [localPath]</code>. The server file
 * path to which we will write is given by <code>serverPath</code>.
 public boolean uploadFile(String serverPath, String localPath)
 throws IOException
 return writeDataFromFile("stor " + serverPath, localPath);
 * Set the restart point for the next download or upload operation. This
 * lets clients resume interrupted uploads or downloads.
 public void setRestartPoint(int point)
 restartPoint = point;
 debugPrint("Restart noted");
 * Gets server reply code from the control port after an ftp command has
 * been executed. It knows the last line of the response because it begins
 * with a 3 digit number and a space, (a dash instead of a space would be a
 * continuation).
 private int getServerReply()
 throws IOException
 return Integer.parseInt(getFullServerReply().substring(0, 3));
 * Gets server reply string from the control port after an ftp command has
 * been executed. This consists only of the last line of the response,
 * and only the part after the response code.
 private String getFullServerReply()
 throws IOException
 String reply;
 do {
 reply = inputStream.readLine();
 debugPrint(reply);
 } while(!(Character.isDigit(reply.charAt(0)) &&
 Character.isDigit(reply.charAt(1)) &&
 Character.isDigit(reply.charAt(2)) &&
 reply.charAt(3) == ' '));
 return reply;
 * Added by Julian: Returns the last line of the server reply, but also
 * returns the full multi-line reply in a StringBuffer parameter.
 private String getFullServerReply(StringBuffer fullReply)
 throws IOException
 String reply;
 fullReply.setLength(0);
 do {
 reply = inputStream.readLine();
 debugPrint(reply);
 fullReply.append(reply + lineTerm);
 } while(!(Character.isDigit(reply.charAt(0)) &&
 Character.isDigit(reply.charAt(1)) &&
 Character.isDigit(reply.charAt(2)) &&
 reply.charAt(3) == ' '));
 // remove any trailing line terminators from the fullReply
 if (fullReply.length() > 0)
 fullReply.setLength(fullReply.length() - lineTerm.length());
 return reply;
 * Added by Julian: Gets a list of files in the current directory.
 public String listFiles()
 throws IOException
 return listFiles("");
 * Added by Julian: Gets a list of files in either the current
 * directory, or one specified as a parameter. The 'params' parameter
 * can be either a directory name, a file mask, or both (such as
 * '/DirName/*.txt').
 public String listFiles(String params)
 throws IOException
 StringBuffer files = new StringBuffer();
 StringBuffer dirs = new StringBuffer();
 if (!getAndParseDirList(params, files, dirs))
 debugPrint("Error getting file list");
 return files.toString();
 * Added by Julian: Gets a list of subdirectories in the current directory.
 public String listSubdirectories()
 throws IOException
 return listSubdirectories("");
 * Added by Julian: Gets a list of subdirectories in either the current
 * directory, or one specified as a parameter. The 'params' parameter
 * can be either a directory name, a name mask, or both (such as
 * '/DirName/Sub*').
 public String listSubdirectories(String params)
 throws IOException
 StringBuffer files = new StringBuffer();
 StringBuffer dirs = new StringBuffer();
 if (!getAndParseDirList(params, files, dirs))
 debugPrint("Error getting dir list");
 return dirs.toString();
 * Added by Julian: Sends and gets the results of a file list command,
 * like LIST or NLST.
 private String processFileListCommand(String command)
 throws IOException
 StringBuffer reply = new StringBuffer();
 String replyString;
 // file listings require you to issue a PORT command,
 // like a file transfer
 boolean success = executeDataCommand(command, reply);
 if (!success)
 return "";
 replyString = reply.toString();
 // strip the trailing line terminator from the reply
 if (reply.length() > 0)
 return replyString.substring(0, reply.length() - 1);
 } else {
 return replyString;
 * Added by Julian: Gets a directory list from the server and parses
 * the elements into a list of files and a list of subdirectories.
 private boolean getAndParseDirList(String params, StringBuffer files, StringBuffer dirs)
 throws IOException
 // reset the return variables (we're using StringBuffers instead of
 // Strings because you can't change a String value and pass it back
 // to the calling routine -- changing a String creates a new object)
 files.setLength(0);
 dirs.setLength(0);
 // get the NLST and the LIST -- don't worry if the commands
 // don't work, because we'll just end up sending nothing back
 // if that's the case
 String shortList = processFileListCommand("nlst " + params);
 String longList = processFileListCommand("list " + params);
 // tokenize the lists we got, using a newline as a separator
 StringTokenizer sList = new StringTokenizer(shortList, "\n");
 StringTokenizer lList = new StringTokenizer(longList, "\n");
 // other variables we'll need
 String sString;
 String lString;
 // assume that both lists have the same number of elements
 while ((sList.hasMoreTokens()) && (lList.hasMoreTokens())) {
 sString = sList.nextToken();
 lString = lList.nextToken();
 if (lString.length() > 0)
 if (lString.startsWith("d"))
 dirs.append(sString.trim() + lineTerm);
 debugPrint("Dir: " + sString);
 } else if (lString.startsWith("-")) {
 files.append(sString.trim() + lineTerm);
 debugPrint("File: " + sString);
 } else {
 // actually, symbolic links will start with an "l"
 // (lowercase L), but we're not going to mess with
 // those
 debugPrint("Unknown: " + lString);
 // strip off any trailing line terminators and return the values
 if (files.length() > 0) { files.setLength(files.length() - lineTerm.length()); }
 if (dirs.length() > 0) { dirs.setLength(dirs.length() - lineTerm.length()); }
 return true;
 * Executes the given FTP command on our current connection, returning the
 * three digit response code from the server. This method only works for
 * commands that do not require an additional data port.
 public int executeCommand(String command)
 throws IOException
 outputStream.println(command);
 return getServerReply();
 * Executes the given FTP command on our current connection, returning the
 * last line of the server's response. Useful for commands that return
 * one line of information.
 public String getExecutionResponse(String command)
 throws IOException
 outputStream.println(command);
 return getFullServerReply();
 * Executes the given ftpd command on the server and writes the results
 * returned on the data port to the file with the given name, returning true
 * if the server indicates that the operation was successful.
 public boolean readDataToFile(String command, String fileName)
 throws IOException
 // Open the local file
 RandomAccessFile outfile = new RandomAccessFile(fileName, "rw");
 // Do restart if desired
 if (restartPoint != 0) {
 debugPrint("Seeking to " + restartPoint);
 outfile.seek(restartPoint);
 // Convert the RandomAccessFile to an OutputStream
 FileOutputStream fileStream = new FileOutputStream(outfile.getFD());
 boolean success = executeDataCommand(command, fileStream);
 outfile.close();
 return success;
 * Executes the given ftpd command on the server and writes the contents
 * of the given file to the server on an opened data port, returning true
 * if the server indicates that the operation was successful.
 public boolean writeDataFromFile(String command, String fileName)
 throws IOException
 // Open the local file
 RandomAccessFile infile = new RandomAccessFile(fileName, "r");
 // Do restart if desired
 if (restartPoint != 0) {
 debugPrint("Seeking to " + restartPoint);
 infile.seek(restartPoint);
 // Convert the RandomAccessFile to an InputStream
 FileInputStream fileStream = new FileInputStream(infile.getFD());
 boolean success = executeDataCommand(command, fileStream);
 infile.close();
 return success;
 * Executes the given ftpd command on the server and writes the results
 * returned on the data port to the given OutputStream, returning true
 * if the server indicates that the operation was successful.
 public boolean executeDataCommand(String command, OutputStream out)
 throws IOException
 // Open a data socket on this computer
 ServerSocket serverSocket = new ServerSocket(0);
 if (!setupDataPort(command, serverSocket)) return false;
 Socket clientSocket = serverSocket.accept();
 // Transfer the data
 InputStream in = clientSocket.getInputStream();
 transferData(in, out);
 // Clean up the data structures
 in.close();
 clientSocket.close();
 serverSocket.close();
 return isPositiveCompleteResponse(getServerReply());
 * Executes the given ftpd command on the server and writes the contents
 * of the given InputStream to the server on an opened data port, returning
 * true if the server indicates that the operation was successful.
 public boolean executeDataCommand(String command, InputStream in)
 throws IOException
 // Open a data socket on this computer
 ServerSocket serverSocket = new ServerSocket(0);
 if (!setupDataPort(command, serverSocket)) return false;
 Socket clientSocket = serverSocket.accept();
 // Transfer the data
 OutputStream out = clientSocket.getOutputStream();
 transferData(in, out);
 // Clean up the data structures
 out.close();
 clientSocket.close();
 serverSocket.close();
 return isPositiveCompleteResponse(getServerReply());
 * Added by Julian: Executes the given ftpd command on the server
 * and writes the results returned on the data port to the given
 * StringBuffer, returning true if the server indicates that the
 * operation was successful.
 public boolean executeDataCommand(String command, StringBuffer sb)
 throws IOException
 // Open a data socket on this computer
 ServerSocket serverSocket = new ServerSocket(0);
 if (!setupDataPort(command, serverSocket)) return false;
 Socket clientSocket = serverSocket.accept();
 // Transfer the data
 InputStream in = clientSocket.getInputStream();
 transferData(in, sb);
 // Clean up the data structures
 in.close();
 clientSocket.close();
 serverSocket.close();
 return isPositiveCompleteResponse(getServerReply());
 * Transfers the data from the given input stream to the given output
 * stream until we reach the end of the stream.
 private void transferData(InputStream in, OutputStream out)
 throws IOException
 byte b[] = new byte[BLOCK_SIZE];
 int amount;
 // Read the data into the file
 while ((amount = in.read(b)) > 0) {
 out.write(b, 0, amount);
 * Added by Julian: Transfers the data from the given input stream
 * to the given StringBuffer until we reach the end of the stream.
 private void transferData(InputStream in, StringBuffer sb)
 throws IOException
 byte b[] = new byte[BLOCK_SIZE];
 int amount;
 // Read the data into the StringBuffer
 while ((amount = in.read(b)) > 0) {
 sb.append(new String(b, 0, amount));
 * Executes the given ftpd command on the server and writes the results
 * returned on the data port to the given FilterOutputStream, returning true
 * if the server indicates that the operation was successful.
 private boolean setupDataPort(String command, ServerSocket serverSocket)
 throws IOException
 // Send our local data port to the server
 if (!openPort(serverSocket)) return false;
 // Set binary type transfer
 outputStream.println("type i");
 if (!isPositiveCompleteResponse(getServerReply())) {
 debugPrint("Could not set transfer type");
 return false;
 // If we have a restart point, send that information
 if (restartPoint != 0) {
 outputStream.println("rest " + restartPoint);
 restartPoint = 0;
 // TODO: Interpret server response here
 getServerReply();
 // Send the command
 outputStream.println(command);
 return isPositivePreliminaryResponse(getServerReply());
 * Get IP address and port number from serverSocket and send them via the
 * <code>port</code> command to the ftp server, returning true if we get a
 * valid response from the server, returning true if the server indicates
 * that the operation was successful.
 private boolean openPort(ServerSocket serverSocket)
 throws IOException
 int localport = serverSocket.getLocalPort();
 // get local ip address
 InetAddress inetaddress = serverSocket.getInetAddress();
 InetAddress localip;
 try {
 localip = inetaddress.getLocalHost();
 } catch(UnknownHostException e) {
 debugPrint("Can't get local host");
 return false;
 // get ip address in high byte order
 byte[] addrbytes = localip.getAddress();
 // tell server what port we are listening on
 short addrshorts[] = new short[4];
 // problem: bytes greater than 127 are printed as negative numbers
 for(int i = 0; i <= 3; i++) {
 addrshorts[i] = addrbytes;
if (addrshorts[i] < 0)
addrshorts[i] += 256;
outputStream.println("port " + addrshorts[0] + "," + addrshorts[1] +
"," + addrshorts[2] + "," + addrshorts[3] + "," +
((localport & 0xff00) >> 8) + "," +
(localport & 0x00ff));
return isPositiveCompleteResponse(getServerReply());
* True if the given response code is in the 100-199 range.
private boolean isPositivePreliminaryResponse(int response)
return (response >= 100 && response < 200);
* True if the given response code is in the 300-399 range.
private boolean isPositiveIntermediateResponse(int response)
return (response >= 300 && response < 400);
* True if the given response code is in the 200-299 range.
private boolean isPositiveCompleteResponse(int response)
return (response >= 200 && response < 300);
* True if the given response code is in the 400-499 range.
private boolean isTransientNegativeResponse(int response)
return (response >= 400 && response < 500);
* True if the given response code is in the 500-5

ok i tried explaining th eproblem in the previous post, but i apologize if my explanation was poor. anyways, i tried to look into it further by doing a printStackTrace() and believe it may be a read error. here is my new updated snippet, and also a link to a screenshot ([click here for screenshot|http://img143.imageshack.us/my.php?image=picture4qr0.png]) of what the error looks like on my end. it seems like a socket is not being read, or maybe it is initialized properly. Again I apologize if my problem is vague, but I do appreciate your input. thanks.
updated code snippet
public void uploadFiles()
 statusLabel.setVisible(true);
 errorLabel.setVisible(true);
 uploadButton.setVisible(false);
 footer.setVisible(false);
 holdingPanel.setVisible(false);
 pbar.setVisible(true);
 pbar = new JProgressBar();
 pbar.setMinimum(0);
 float Total=0;
 for (int i=0; i<fileLengths.size(); i++)
 if(((java.lang.Boolean)model.getValueAt(i,1)).toString().equals("true"))
 Total+=Float.parseFloat((String)fileLengths.get(i));
 pbar.setMaximum((int)Total);
 String info="";
 try
 ftp=new FTPConnection(false);
 ftp.connect("ftp.chris-malcolm.com");
 if (ftp.login("chrismal", "***"))
 statusLabel.setText("Status: Connected.");
 info+="Successfully logged in!\n";
 info+="System type is: " + ftp.getSystemType()+"\n";
 info+="Current directory is: " + ftp.getCurrentDirectory()+"\n";
 if (ftp.changeDirectory("/www/images/"))
 info+="directory changed to: " + ftp.getCurrentDirectory()+"\n";
 try
 for (int i=0; i<allFiles.size(); i++)
 if(((java.lang.Boolean)model.getValueAt(i,1)).toString().equals("true"))
 String f=client.verifyFileName((String)model.getValueAt(i,0));
 String f2=""+((File)allFiles.get(i)).getPath();
 info+="filename: "+f2+"\n";
 if (ftp.uploadFile(f2))
 statusLabel.setText("Status: Uploading "+f+" - "+i+" of "+calculateTotalFiles()+" files(s)");
 pbar.setValue(Integer.parseInt((String)fileLengths.get(i)));
 else
 errorLabel.setText("Error occured while uploading"+f2+"\n");
 catch(Exception de)
 StringWriter sw = new StringWriter();
 PrintWriter pw = new PrintWriter(sw);
 de.printStackTrace(pw);
 pw.close();
 //errorLabel.setText("<html>ERROR:"+sw.toString().replace("\n", " ")+"</html>");
 info+="Error: "+de.getMessage()+"\n";
 info+="Trace: "+sw+"\n";
 try { ftp.disconnect(); statusLabel.setText("Status: disconnected.");} catch(Exception e2) {};
 else
 info+="could not change directory\n";
 else
 info+="could not login";
 catch (Exception e)
 StringWriter sw = new StringWriter();
 PrintWriter pw = new PrintWriter(sw);
 e.printStackTrace(pw);
 pw.close();
 info+="Error: "+e.getMessage()+"\n";
 info+="Trace: "+sw+"\n";
 try { ftp.disconnect(); statusLabel.setText("Status: disconnected.");} catch(Exception e2) {};
 errorLabel.setText("ERROR:"+info);
 JOptionPane.showMessageDialog(this, info, "test", JOptionPane.PLAIN_MESSAGE);
 try { ftp.disconnect(); statusLabel.setText("Status: disconnected.");} catch(Exception e2) {};
 Edited by: cjm771 on Jul 13, 2008 7:23 PM

Ftp uploading problem

I work on a corporate net with CS4. Uploading of sites with ftp is a problem. Is there another way to upload to html folder. I currently have to do design with CS4 DW and publish with Frontpage

In addition to Lawrences' recommendation I use CuteFTP and have done so for years. I use the commercial version, but there could be a light (free) version still available. Found it much more reliable than the DW FTP I'm afraid :-)
For very basic uploading of static files (haven't tried with dynamic sites), you can use IExplorer (or Firefox for that matter), by typing in ftp://yourdomainurl.com and entering username and password. I've used that if I've been away from my wn opc and had to work remotely.
Nadia
Adobe® Community Expert : Dreamweaver
Unique CSS Templates |Tutorials |SEO Articles
http://www.DreamweaverResources.com
Book: Ultimate CSS Reference
http://www.sitepoint.com/launch/005dfd4/3/133
http://twitter.com/nadiap

FTP Upload problem on Dreamweaver 8

Hi, I'm new to Dreamweaver and I've created my site which
uploads successfully except fot a couple of MS Access database
files which I need for password protection of my site.
To me it looks like a permission problem for the localhost
folder on my PC.
I've followed all the steps for enabling relevant permissions
for the Internet Guest Account (which appears in the Security Tab
of that folder's Properties dialogue box).
I've saved the MS Access database files in the 2003 version
(instead of MS Access 2007).
Operating System: Windows XP pro Service Pack 3
Dreameaver 8
Below is the error message.
Connections\myhealthnetwork.asp - Put operation successful
_private\myhealthnetwork.ldb - error occurred - An FTP error
occurred - cannot put myhealthnetwork.ldb. Access Denied. The file
may not exist, or there could be a permission problem.
_private\myhealthnetwork.mdb - error occurred - An FTP error
occurred - cannot put myhealthnetwork.mdb. Access Denied. The file
may not exist, or there could be a permission problem.
File activity incomplete. 2 file(s) or folder(s) were not
completed.
Files updated: 1
Files with errors: 2
_private\myhealthnetwork.ldb
_private\myhealthnetwork.mdb
Finished: 07/07/2008 10:02

Hi, I'm also using Dreamweaver 8 and have encountered this
problem before. I'm a little limited on my technical expertise
however I have found either of the following solutions helped.
1. Delete the corresponding files on your remote server and
FTP again using the 'Put' function rather than the 'Syncronise'
function.
2. Alternatively, if using 'Cpanel' initially upload your
Database using your Cpanel browser and then make subsequent updates
by DW FTP, this seems to fix the prob by setting or re-setting the
appropriate permissions.
Sorry can't be more help
Altum

(more) FTP upload problems

Hi,
I recently uploaded some elements of my website to my FTP host...I later/just now redesigned the website and tried to upload to the ftp host again, however this new design hasnt seemed to have uploaded and the old design is now all jumbled and half missing.
Anyone know what might be causing the new site to not upload and just mess with the old one? I wanted the old website design to be completely overwritten - basically to just completely replace the old design with the new one. I designed the new site in a new muse file (as opposed to modifying the existing one) if that makes any difference and it exported as HTML perfectly fine. Sounds like it could be an FTP host server issue?
Any help appreciated. Ive attached some screen shots of the new design that isnt uploading and jumbled old design.

Hi,
Thanks for the help. I deleted all the files previously on the web space and asked the host to reset my permissions. I tried uploading the site again and again it now looks jumbled, although a bit more has been uploaded.
Like before, the site exports in html absolutely fine.
I have spoken with the ftp host and they are adamant that there is no issue on their end. They say all permissions are fine and repeatedly asked if I was uploading all the necessary files. When I clicked to upload I selected to upload all files. They then checked the code and said there were things reffered to in code that were missing from the site such as "scripts/form-u1089.php" and "images/blank.gif". However, there is a lot missing from the site.
The domain is www.andonigeorgiou.com if you want to check it out for yourself...thats obviously not the design...
Any help would be great.

Recurring ftp connection problems with CS3

I've been experiencing recurring connection problems to a live server.
The settings have not changed, and the "test" verifies connection is working.
I can connect to the site via ftp successfully using the same information.
All I see in the remote server box is /www/ , I cannot open the folder however.
The only way to resolve is to delete my profile on the computer and recreate.   This fixes it for up to 1 week, but sometimes as little as 24 hours.
Others who log in to the same machine and use Dreamweaver are able to connect successfully.
I work on a network and do use 2 separate work stations.   On one of these workstations is also installed Avid Newscutter, the full Adobe CS suite and a programme called Flip (for working with xml).    I had no problems until I started working at this terminal.
The company technical support is at a loss, so I was hoping folk here might have some suggestions? I've been using Dreamweaver, various versions both at work and home for many years and have never experienced a problem like this before.
thanks.
Karen

Hi Jon
I am getting two error messages, one that says that the log on info/password is wrong, the other is a large message that tells me to check everything from cables to firewalls. My provider has recently been updating their systems and I have had to change passwords etc, but they insist that it is nothing to do with them. I am sure that they have changed some protocols or something that dreamweaver won't recognise.
I am connected to the internet via a cable to a belkin router and have no problems with internet connections.
I have tested the adobe ftp test connection through dreamweaver which worked fine.
I haven't tried filezilla - I'll have a look.
Jane

FTP Upload problem "same - not transferred"

k, so when I upload a php file that I've edited to my website
I get this in the ftp log panel:
Started: 10/4/07 1:11 PM
templates:main:loadVideo.php - same - not transferred
File activity complete.
Files skipped: 1
Finished: 10/4/07 1:11 PM
Even though I have edited a couple letters in php, it's still
not uploading. Is there a way to turn this functionality off so it
doesn't compare files? It makes the ftp functionality of
dreamweaver useless if it doesn't compare files properly.

Could you perhaps ename the old file ON THE SERVER
like OLDvideo.php and try your upload again ?
"jezx777" <[email protected]> wrote in
message
news:fe37do$n7m$[email protected]..
> k, so when I upload a php file that I've edited to my
website I get this
> in the
> ftp log panel:
>
> Started: 10/4/07 1:11 PM
> templates:main:loadVideo.php - same - not transferred
> File activity complete.
> Files skipped: 1
> Finished: 10/4/07 1:11 PM
>
> Even though I have edited a couple letters in php, it's
still not
> uploading.
> Is there a way to turn this functionality off so it
doesn't compare files?
> It
> makes the ftp functionality of dreamweaver useless if it
doesn't compare
> files
> properly.
>

I am running OS 10.7.5 on a Macbook. Problems with ftp upload

I am running OS 10.7.5 on a Macbook. I am trying to upload to an ftp server. The connection is established with no problem but any attempt to upload files times out. This is an intermittent problem. I have been using fetch as an ftp client quuite successfully for a long time. The problem starts when there is trouble with the broadband connection. The ftp upload then falls over. I have managed to re-establish it in the past by setting up the connections from scratch. This has not worked this time. The same thing happens with two other clients that I have, so it is not specifically related to fetch. I can uplad files from PC's and by using my iphone's 3g connection as a personal hotspot. The problem seems to lie with the way the macs (the same thing happens on an older mac also running OSX) communicate with the router. I have tried with and without passive mode.
Please can anyone help. It is driving me to distraction.
Oh and I have just downloaded the latest security update.

For anyone else with the same problem.
My husband discovered the problem is with the MTU, maximum transmission unit . This article describes the problem and solution very clearly
http://www.macgurulounge.com/manually-managing-mtu-size-in-mac-os-x/
Our router was running at 1492 and the mac at 1500. I found that resetting to 1400 cured the problem.
I hope this is helpful to other folk having the same problem

Problems With FTP Upload in Leopard 10.5.3-4

Hi, I experience a strange problem with ftp upload speed in 10.5.3-4. When I start upload a file to my trusted ftp server the upload speed starts to decrease from 300 kb/sec to 35 -40 kb/sec. It remains normal for 1-2 minutes (about 300 kb/sec) and then smoothly decreases to 35 -40 kb/sec. Pressing Stop and then Resume in Cyberduck makes speed normal for 1-2 minutes and then it starts to decrease again. It does not depend on ftp-client, it does not matter if I use either Cyberduck, Transmit or Fetch. It happens if I use either ethernet or airport connection. I have my old Powerbook with 10.4.11, it's connected to the same router with the same settings and the same time upload speed remains stable about 300 kb/sec.
But when I transfer files from my Macbook to my old Powerbook via ftp everything is fine. And when I transfer files to ftp server of my local ISP it's also fine.
Please, help me, I have to upload big 100 Mb files very often and it's significant difference for me 30 or 300 kb/sec
Boris

I'm afraid it's not just the Duck or FTP, Boris....It's many many Apps...and protocols... 10.5 appears to have ;broken',a number of file transfer protocols and Apps... (Wired and KDX are two that come to mind- precisely the same symptoms, AND some others) Apple's own 'built-in' FTP appears OK Mac-Mac, oddly enough.
There's obviously some kind of weird Copy-Paste problem too.
It's obviously 'fixable' or a workaround is available because several s/w mobs have released 'fixes for 10.5 file transfer Bug'
The rest of us will just have to wait while another unannounced,unacknowledged, gaping hole in the Mac OS is quietly fixed and our expensive s/w sits unusable...
Not really good enough, is it ?
Like: Not being able to automatically detect a part file transfer on FTP and Auto-resume from whence you left off: something we thought was pretty cool- back in about 1984.... and absolutely essential in 86 or so.
Boris:You will almost certainly find that it happens whatever the client-server server setup and applications or Medium... I've seen precisely what you describe happen with Airport, Cable, 10/100/1000' local' LAN...
- and watching your throughput drop from 300K to 300 BYTES/Sec is NO FUN.
I've spent a lot of time and money convincing potential 'Switchers' of the superiority of the Mac way over the last 20 years or so...
I'm getting pretty tired at defending the indefensible: 'SkoolBoy Misstakes' in a 24 year old 'superior Computer.- Not Good enough, Apple.

How Upload Premiere Pro CS3 FTP to Amazon S3?

Hello Video Mavens,
Do you know how to configure Adobe Premiere Pro CS to upload a file to Amazon's S3 service using the FTP client built into Adobe Media Encoder?
If so...your detailed, step-by-step instructions are warmly welcomed...and your Rock Star status is secured for eternity.
Many thanks in advance!
Plane Wryter

Hi Curt,
Thanks for the blazingly quick reply; great to hear from a fellow Premiere fan.
Actually--because Amazon S3 is anything but a routine emulation of FTP--is why I posted my question on this forum.
IF IT'S EVEN POSSIBLE to use Media Encoder's FTP client to upload to Amazon S3...then whoever has figured this out will know specific S3 issues which have to be overcome for success.
FTP uploads, by themselves, are no big deal...Complexity Factor 2. FTP upload to Amazon S3 appears to be beyond Complexity Factor 14.
In the spirit of Thomas Edision, I have successfully discovered a dozen ways not to be able use Adobe Media Encoder's embedded FTP client to upload to Amazon S3's services.
Thus, as far as I know (at the moment), it's not possible.
Hoping that someone who's successfully made this work can weigh in with the Special Knowledge which makes the difference between Looks like it can't be done; and Oh yeah, here's what you have to do.
Curt, many thanks to you, and all the great people on this foruml,
Plane Wrtyer

Base filtering engine is preventing FTP uploads

Using win 8.1. Ftp uploads (from any ftp program, filezilla, winscp and with knowhow cloud backup) stalls after 2-3 files have been uploaded. A single large file will upload but not multiple small files. If I boot into windows safe mode the problem
does not occur, ftp works fine, always. In normal mode by eliminating one running component at a time I found that the base filtering engine appeared to be the only problem. If base filtering was running the ftp problem occurred, if not then ftp
was fine.
Can one repair or replace the base filtering engine?. I found this as it relates to win 7
FROM ONE OF YOUR OTHER THREADS:
you may download and apply the BFE service registry fix (#11) in this page: Miscellaneous Registry Fixes for Windows 7/XP/Vista - The Winhelponline Blog: LINK REMOVED (could not submit, Body text cannot contain images or links until we are able to verify
your account.)
Is that applicable for this problem in win 8.1?
I do understand the BFE is an important security issue. I have also scanned my system for viruses, I use defender (computer associates) anti virus and firewall, and spybot for malware. I can't specifically pinpoint the occurrence of the problem with
the installation of any specific new software program. I have disabled the defender firewall and virus software and that does not solve the problem. Disabling base filtering engine results in a functioning ftp, enabling results in
a stalled ftp.
Any help would be appreciated.

Try this suggestion
http://social.technet.microsoft.com/Forums/en-US/d8e59632-fca9-4bbd-b748-881af144706a/access-denied-base-filter-engine?forum=winservergen
1. Browse to the location for the BFE service in the registry (HKLM\System\CurrentControlSet\Services\BFE\Parameters\Policy), right click and select permissions.
2. In the "Permissions for Policy" window, click advanced | Add.
3. Once the "Select Users, Computers or Group" box appears, change the "From this location:" to point to the local machine name.
4. After changing the search location, enter "NT Service\BFE" in the "Enter the object name to select" box and click "Check names" - this will allow you to add the BFE account.
5. Give the following privileges to the BFE account:
Query Value
Set Value
Create Subkey
Enumerate Subkeys
Notify
Read Control
After adding the BFE account to the registry key, please try to start the Base Filtering Engine service.

Need a fix for Muse upload problems to GoDaddy???? I found one!

GoDaddy now has a new cpanel named "Plesk". In that panel you will find File Manager. (I use the Windows version). In the left panel of File Manager, you will see the root directory and all of its subfolders. When you click on any of these folders, you will see their contents in the right panel. You will also see a folder labelled "httpdocs". This is the default folder that is set up in GoDaddy to be your "home" folder. So, to fix your upload problems, do these steps:
1. Click on the httpdocs folder to see it open in the right panel. In the toolbar above the right panel, you will see a green plus sign with the word "New". Click on this drop-down menu.
2. Choose "directory"
3. Type in the name of one of the folders that your site will need, e.g. images, css, assets, scripts, etc. This basically creates a subfolder within the httpdocs folder, right? (There is a way to see how your Muse site sets up these folders prior to publish or upload. You do this by choosing "Export as HTML" in the File menu of Muse, creating a folder on your desktop (or wherever) for the HTML export, then inspecting its contents after your save it.)
4. Continue to create all the subfolders within httpdocs that you will need. Unfortunately, you have to do this one folder at a time.
5. After you have them set up, begin the process of uploading your site, like this:
6. In the File menu in Muse, you'll of course see "Upload to FTP Host ...". Click on it.
7. A dialog box will open. In the top text field, type in your website name ... you must use www. with your entry
8. In the "FTP Host" field, type in your domain name again like this ... "ftp.yourdomain.com" ... NO FORWARD SLASHES!!! (even if you find instructions to the contrary, like in Filezilla) (Also, your domain might be a .org or .net, instead of a .com)
9. In the "Host directory" field, YOU MUST ENTER "httpdocs"!!!! Despite what you learn, DO NOT LEAVE THIS FIELD BLANK!!!
10. Then enter your GoDaddy username and password. (If you set up a different username for your GoDaddy account and your Plesk account, like I did, then use your Plesk username and password.)
11. Click on "Upload: All Files"
The next few steps are tedious, but necessary to keep your site organized on GoDaddy and to keep from confusing things. You can probably get away with it, but, if your site doesn't load properly in a browser after doing the above steps, you'll need to click on each folder in the root directory that you copied as a subfolder in the "httpdocs" folder and delete the files. For example, in the left panel of File Manager, you'll see the root directory. Click on the "images" folder. If there are any images that you need for your site in that folder, delete them. Remember ... you've already copied them over to the images subfolder in httpdocs during your last upload described in the instructions above. If you don't trust that you can delete them, click on the "httpdocs" folder, then click on the "images" folder and check the files. Same files, right? So, go ahead and delete the site files that you find in the appropriate folders in the root directory, making sure that you don't delete the ones that are NOT duplicated within the "httpdocs" folder. Also remember that your .html pages will not require a subfolder to be set up in the "httpsdocs" folder. They can just sit there, looking pretty. But you will have to delete them from the root directory to keep things tidy. Just click on the folder icon next to "root directory", and you'll see those html pages in the right panel. Again, delete them.
REMEMBER: To keep your Muse uploads to your GoDaddy site error free, you must ALWAYS make sure that "httpdocs" appears in the "Host directory" field in the "Upload to FTP Host ..." dialog box in Muse. And all files and folders that your site needs MUST go in the "httpdocs" folder in the root directory of your site in GoDaddy's File Manager (now found in your Plesk Panel).
I hope this wasn't too confusing. If so, call GoDaddy. I called them with this fix and they are using it in their phone support.

Thank you! Thank you! Thank you! I was going out of my mind. And GoDaddy was no help (although they're usually really good.) I put all the folders in "httpdocs" and the website worked perfectly!

Charter FTP Upload

So, after talking with charter (who basically told me to get bent, talk to apple...), i'm of the persuasion that there seems to be a problem with Charter's Personal Web Space FTP Upload system, and Mac OS X. Here's the 411:
I go to ftp://webpages.charter.net, Mac OS X takes over and initializes an FTP connection with Charter. I type my user name and password in, and i get this great window that shows me my webspace (which is clear because i haven't uploaded anything yet). delighted that it works and it will be so much more conveineint to simply drag and drop my files from the computer to the new Charter FTP window i give one file a whirl.
Mac OS X says:
+"The Item "any old friggin thing" could not be moved because "webpages.charter.net" cannot be modified"+
"OK..." i say, "We'll see about THAT business..." and off i go to the Get info window to change the permissions so that i CAN change. no such luck, it doesn't even have a drop down, it says "You can only read".
What the heck?!
I try a third party FTP client and i can transfer files the old Anarchie way, ALL DAY LONG, NO PROBLEM. Why in the world can't i do the same thing from the Mac OS X FTP window? It makes no sense...
Help... Me... PLEASE!!!!

Sorry to report, but Charter was right... FTP from the Finder is read Only... cannot Write, long standing issue... they tell me it's because of the inherent lack of Security via FTP, (it indeed is, but...).
Your choices are using a 3rd party Client, (which I prefer, TransmitX here, but lots like the free CyberDuck), or using Terminal to do it.

No FTP upload progress in CS6

The FTP upload progess window in Dreamweaver CS6 doesn't show the progress (Mac OS X 10.7.3).
The progress bar is empty and there's no uploaded bytes counter either.
It's a major bummer.
Hope it will be fixed soon.
In addition, if you minimize the progess window into the Dock, it doesn't get closed automatically once the transfer is complete - like it was in previous version of Dreamweaver.
It was very handy, Adobe please bring it back!
Thanks,
Leo

Thanks,
I just updated to 10.7.4, and while it fixed the icons issue indeed, the problem with FTP progress is still the same.
I submitted the bug through Adobe bug reporter.
Do you see the progress on your machine?

Using WEB Output HTML Gallery and uploading using ftp upload the HTML page views correctly but images only display the alt tag?

Using WEB Output HTML Gallery and uploading using ftp upload the HTML page views correctly but images only display the alt tag in the browser window?

After a little investigation, I discovered that PNGs also do not render correctly in IE7 in similar circumstances.
I ended up using Levels in Photoshop to bring the output blacks up to "5", saved the images as PNGs, modified the HTML from .jpg to .png, and that seems to have covered up the problem well enough.
By the way, I did confirm that IE8 beta 2 renders the images correctly.
Brian

FTP upload problems in CS3

Similar Messages

Maybe you are looking for