Full data is not being display in report for "LANGUAGEINDEPENDENT_EXTENDED_Text" type field

Hi
I have extended Opportunity BO with a field type LANGUAGEINDEPENDENT_EXTENDED_Text", then I have enhanced my datasource and report.
for this field I have entered value almost 100 characters but in report only 60 character is being shown.
Could anyone help me how to bring whole value in report as it is in database.
Thanks
Sunil Maurya

Hi Sunil,
As per your requirement in reports only display 60 characters.
We have similar requirement to display more than 1000 character in report but this is not possible in report
Please check this discussion :
Add 'notes'-field in report
Regards,
Mithun

Similar Messages

Udf Data is not being displayed in the report

Hi all,
i have designed one report in which i am displaying some udf fields along with other system fields.
i have not used any selection criteria.
when i run report it doesn't display udf data of some random rows in the report even if data is peresent in that udf field.
If i open sales order and press 'Shift-F2' and update the document and now if i run report then i get that udf value in the report.
why this happening. data is there in the udf field only its not displayed in the report with out updating the that udf.
pls suggest some solution.
regsrds,
Chetan.

Hi Ashish,
I ran the "ZPS/!ZPS" in RSRT where ZPS is the infoset name. In Dev, it displayed the values. In QA, it displayed the below messages:
ECharacteristic 0TCAKYFNM does not exist. Check authorizations
WThere are calculated elements. These results are bracketed [ ]
and below that, it displayed the values for Number of records. But, it has not displayed the values for the other figures.
Does this has any impact in QA.
Thanks & Regards,
AVN Rao.

Data is not being displayed into DataGridview until Clicked inside the cells

Hi,
On a windows form, I have a DataGridView, its columns are auto-generated every time. Data is loaded after the user click a data-load button. However this is NOT working well, the data is not displayed until manually clicked inside the grid cells. The following
is the code. Could you please help? Thanks!
private void ButtonTestGrid_Click(object sender, EventArgs e)
            for (int i = 0; i < 10; i++)
                this.MainDataGrid.Columns.Add(TestHelper.CreateTextBoxColumn("Col" + i.ToString(), 120));
            Dictionary<string, object>[] data;
            data = TestHelper.CreateTestData();
            this.MainDataGrid.EndEdit();
            TestHelper.LoadGridData(this.MainDataGrid, data);
            this.MainDataGrid.Refresh();
public class TestHelper
        public static DataGridViewTextBoxColumn CreateTextBoxColumn(string name, int width)
            DataGridViewTextBoxColumn column = new DataGridViewTextBoxColumn();
            column.HeaderText = name;
            column.Name = name;
            column.ReadOnly = false;
            column.Width = width;
            return column;
        public static void LoadGridData(System.Windows.Forms.DataGridView grid, Dictionary<string, object>[] data)
            int index;
            foreach (Dictionary<string, object> row in data)
                index = grid.Rows.Add();
                LoadRowData(grid, index, row);
        public static void LoadRowData(System.Windows.Forms.DataGridView grid, int index, Dictionary<string, object> data)
            string name;
            for (int i = 0; i < grid.Columns.Count; i++)
                name = grid.Columns[i].Name;
                if (data.ContainsKey(name))
                    grid.Rows[index].Cells[name].Value = data[name];
        public static Dictionary<string, object>[] CreateTestData()
            Dictionary<string, object>[] dataList = new Dictionary<string, object>[5];
            Dictionary<string, object> data;
            for (int j = 0; j < 5; j++)
                data = new Dictionary<string, object>();
                for (int i = 0; i < 10; i++)
                    data.Add("Col" + i.ToString(), i);
                dataList[j] = data;
            return dataList;

There are different ways to bind the datagridview control to it's datasource, the question is where and what is your datasource? Is it from a database or XML file, or is it built on runtime...etc?
Based on your explanation I can understand that the Datagridview is binding correctly in the code behind since the rows of the grid are created. Because the row of the Datagridview are created only while it is binded correctly to it's datasource. The issue
of the display seems something different and strange.
Try also this way by using DataTable one the common ways used:
static DataTable GetTable()
// Here we create a DataTable with four columns.
DataTable table = new DataTable();
table.Columns.Add("Dosage", typeof(int));
table.Columns.Add("Drug", typeof(string));
table.Columns.Add("Patient", typeof(string));
table.Columns.Add("Date", typeof(DateTime));
// Here we add five DataRows.
table.Rows.Add(25, "Indocin", "David", DateTime.Now);
table.Rows.Add(50, "Enebrel", "Sam", DateTime.Now);
table.Rows.Add(10, "Hydralazine", "Christoff", DateTime.Now);
table.Rows.Add(21, "Combivent", "Janet", DateTime.Now);
table.Rows.Add(100, "Dilantin", "Melanie", DateTime.Now);
return table;
Then to bind the above Datatable to the grid control:
this.MainGrid.DataSource = null;//To clear before bind
this.MainGrid.DataSource = GetTable();
Fouad Roumieh

WHT amount not appearing in FBL1N report for Document type RE

Dear Friends,
While running FBL1N report for any vendor where TDS is applicable, the WHT amount is appearing for KR document type. But when it is RE document type the WHT amount is not appearing in the report. How can we resolve this? Any enhancement/any note to be applied?
Regards,
Ramkumar

Hi,
FBL1N is having the classic withholding tax field hence please don't refer the those fields.
please don't refer those fields.
Please review attached note 363309 for detailed explanation.
BSEG-QBSHB is designed to fill for the classic withholding tax. And
extended withholding tax information is stored exclusive in table
WITH_ITEM.
You can check in table BSEG for the fields and will find that system
do NOT update field BSEG-QBSHB.
In your line layout,you define a field BSEG-QBSHB. But actully the field
of vendor/customer line item is filled with zero from FI. Thus,it shows
zero in line item display.
And as note 363309 says,
"Remove the field which contains the withholding tax information
from your display variant.
If you want to display the withholding tax information, double-click on
the document number and subsequently choose 'Withholding tax'."
Regards
Madhu M
Edited by: M Madhu on Jan 18, 2012 9:13 AM

Purchase order no not getting displayed in FBL3N for doucment type RE

Dear all,
We have done a settings in FBL3N t.code. We have added BSEG-EBELN in the special fields and saved the layout. The purpose is to make the purchase order number to display when we are executing line item display for GR/IR clearing and Cenvat clearing gl account. Purchase order number is correctly getting displayed in Gr/ir clearing account. But in cenvat clearing gl account the transactions that are related to doucment type SA(that is J1IEX transaction), the purchase order number is getting displayed, but in the transactions that are related to document type RE(MIRO transactions), the purcahse order number is not getting displayed.
We have checked the BSEG table for the gl account. The purchase order number is not getting updated for the MIRO transactions in the cenvat clearing gl account.
Please suggest us so that the above issue can be solved.
Thanks & Regards,
Anand

Hi,
Could you please add field BSEG-EBELN as a special field in FBL3N (from menu path Settings -> Special fields). Then, select the Purchase order field again from "Change Layout" (Ctrl+F8). Now this field is available for display variants, it has the technical name 1-U_EBELN and the description 'Purchase Document'. The other field has the same description but as technical name
'1-EBELN'. When you create a display variant be aware that you select 1-U_EBELN and not 1-EBELN.
Please also refer to note 215798.
Regards
Ravinagh Boni

My form data is not being displayed when signing in to different websites such as Facebook.

I have tried clearing the history and form data, and I have tried deleting the specific sites that I've been having problems with and still has not fixed the problem.

Oops here is the jpg - not sure whey so small.

After deploying the project data is not being displayed

HI Experts,
I have done my application using jdev 11.1.1.6 My application works great. when I deploy it from my system.
When My Admin deploys it from his system then deployment go well and when he log in to see the pages
some of the data displays and other places it shows empty space
I don't know what's happening.
We are sharing the same application.
Can anyone help me please
Thanks,
San

Is the security involved? May be your admin doesn't have the right to see the pages.
Do you deploy to the same server? Or do you use the embedded server for testing?
Timo

Loaded data is not yet visible in Reporting (see long text) Message no. RSM

Hi All,
I have one issue in BI part of Solman. For one of the scenario of Solution Manager uses its own BI component (BI_CONT 7.03 SP08 SAP_BW 700 SP15).
There is one background job which has to update the data in one of the infocube 0SMD_PE2D. This job is getting failed for the past 2 months.
When i check the logs of that background job, it shows the long text as below.
Loaded data is not yet visible in Reporting (see long text)
Message no. RSM1130
Diagnosis
There is an inconsistency between the load status of the data and the option of reporting on this data.
There is data in the InfoProvider that is OK from a quality point of view, but is not yet displayed in reporting.
The problem, for example, is to do with request 0000000494, number APO_R4CEHVODV7XS7MRL741GSMV9UB.
Procedure
Choose Refresh to remove the inconsistency.
I went to RSA1 and selected that cube and choose "Execution changes - Manage". On the right hand side under request tab page it shows all the requests with request status as Green. In Monitor there is No Data Available
I found a similar thread [Loaded data is not yet visible in Reporting for Data Mart destination cub; unfortunately solution is not updated.
Could any one help me
regards
Naveen

Hi Aduri,
In LISTCUBE i am getting the following error
SQL Error 0
Unknown error in SQL interface
System error in program SAPLRS_EXCEPTION and form RS_EXCEPTION_TO_MESSAGE
Source system is Solution Manager only, production client and BI by default its running in 001 client. We dont have any APO system in our landscape.
Kindly advice
Regards
Naveen

Crystal Reports 2010 SP1 on IIS 7.0 - Report is not being displayed

Hi,
Finally, the keycode assembly, BusinessObjects.Licensing.KeycodeDecoder.dll error is gone, after I installed Crystal Runtime 2010 SP1. Also, I tested Crystal Report 2010 SP1 on my Windows 32 application and I can tell that I do not have this error anymore and report is being displayed properly.
But Crystal Report is not being displayed on ASP.NET page on MS Server 2008 standard edition SP2 with IIS 7.0. Database resides on iSeries remote machine.
The MS Server 2008 is virtual machine.
OS system has:
Crystal Report Basic Runtime for Visual Studio 2008
SAP Crystal Reports Runtime engine for .NET Framework 4 (32-bit)
Simply the report is not being displayed at all. No errors are being recorded in the Event Viewer.
Nothing happens; excerpt the page is Loadingu2026 and Waiting for u2018website nameu2019 in the left lower corner of Firefox web browser.
Here is the code behind aspx page with a command button - very simple:
using CrystalDecisions.CrystalReports.Engine;
using CrystalDecisions.Shared;
protected void Button1_Click(object sender, EventArgs e)
ReportDocument crReportDocument;
Database crDatabase;
Tables crTables;
// CrystalDecisions.CrystalReports.Engine.Table crTable;
TableLogOnInfo crTableLogOnInfo;
ConnectionInfo crConnectionInfo;
crConnectionInfo = new ConnectionInfo();
//Set server name
crConnectionInfo.ServerName = this._strServerName;
//set database name
crConnectionInfo.DatabaseName = this._strDatabaseName;
crConnectionInfo.UserID = this._strUserID;
crConnectionInfo.Password = this._strUserPassword;
//Set integrated security
crConnectionInfo.IntegratedSecurity = false;
crReportDocument = new ReportDocument();
crReportDocument.Load(Server.MapPath("~/crystal-reports/TransformerLoad/TransLoadMonthlyMax.rpt"));
crDatabase = crReportDocument.Database;
//Set all tables from current report file
crTables = crReportDocument.Database.Tables;
//crTableLogOnInfo.ConnectionInfo = crConnectionInfo;
//Apply schema name to the table's location
foreach (CrystalDecisions.CrystalReports.Engine.Table _crTable in crTables)
crTableLogOnInfo = _crTable.LogOnInfo;
crTableLogOnInfo.ConnectionInfo = crConnectionInfo;
_crTable.ApplyLogOnInfo(crTableLogOnInfo);
//Check if database table name starts
if (_crTable.Location.StartsWith("XFMRSMAX", StringComparison.CurrentCulture) ||
_crTable.Location.StartsWith("XFMRSMIN", StringComparison.CurrentCulture))
//_crTable.Location = this._strSchemaName + "." + _crTable.Location.Remove(8) + Convert.ToInt32(Request.QueryString\"ReportYear\");
_crTable.Location = "XFMRSMAX09";
else
_crTable.Location = _crTable.Location;
this.CrystalReportViewer1.ReportSource = crReportDocument;
This code runs on my development machine Win XP SP3
OS system has:
Crystal Report Basic Runtime for Visual Studio 2008
SAP Crystal Reports Runtime engine for .NET Framework 4 (32-bit)
This code also runs on another development server - Windows XP SP3 (IIS 5.1)
OS system has:
Crystal Report Basic Runtime for Visual Studio 2008
SAP Crystal Reports Runtime engine for .NET Framework 4 (32-bit)
ispnet_client folder has IUSR user and this user has read permissions to this folder. I even tried to change the permissions to Read & Execute.
I am developing my reports using Crystal Reports 2008 SP2.
Any help would be greatly appreciated.
Serghei

Hi Ludek,
Thank you for your response.
I checked the web.config file, all http handlers are there. I think the handlers are required to render the images on crystal report viewer but in my case the report viewer is not being rendered.
I have to questions:
1. What exact folders should be under aspnet_client\system_web?
In my case I have structure like this
aspnet_client\system_web\2_0_50727\crystalreportviewers13
aspnet_client\system_web\4_0_30319\crystalreportviewers13
Should I have folders something like this
aspnet_client\system_web\2_0_50727\crystalreportviewers13_1
aspnet_client\system_web\4_0_30319\crystalreportviewers13_1
after I installed Crystal Reports 2010 SP1
Also, in C:\Program Files\SAP BusinessObjects\Crystal Reports for .NET 4.0\Common\Crystal Reports 2011\ there is no folder named as crystalreportviewers13 but instead crystalreportviewers
a.     Should I copy all files from this folder to aspnet_client\system_web\2_0_50727\crystalreportviewers13, or
b.     Should I copy all files from this folder to aspnet_client\system_web\2_0_50727\crystalreportviewers13 and rename this folder to
crystalreportviewers
2. Can you explain how to get a data report?
This is the quote from your previous answer
I'd be interested to see this simplified to a saved data report - no DB logon code - as a test...
Thank you Serghei

Data is not getting displayed in the report from an Infoset.

Hi All,
I am having a report based on an infoset. This report is displaying the data in the Dev. envmt. When it is transported to the QA, it is not displaying the data in the BEx as well as RSRT, in the QA envmt. The patch levels of both the Dev. and QA are the same. The Queries are same in the Dev and QA also.
While trying to display the data from the infoset (rt.click- display data), i am able to view the data, in the QA.
Could anyone please suggest why the data is not getting displayed in the query designer.
Thanks & Regards,
A.V.N.Rao

Hi Ashish,
I ran the "ZPS/!ZPS" in RSRT where ZPS is the infoset name. In Dev, it displayed the values. In QA, it displayed the below messages:
ECharacteristic 0TCAKYFNM does not exist. Check authorizations
WThere are calculated elements. These results are bracketed [ ]
and below that, it displayed the values for Number of records. But, it has not displayed the values for the other figures.
Does this has any impact in QA.
Thanks & Regards,
AVN Rao.

Popularity trend/usage report is not working in sp2013. Data was not being processed to EVENT STORE folder which was present under the Analytics_GUID folder.

Hi
I am working in a sharepoint migration project. We have migrated one SharePoint project from moss2007 to sp2013. Issue is when we are clicking on Popularity trend > usage report, it is throwing an error.
Issue: The data was not being processed to EVENT STORE folder which was present under the
Analytics_GUID folder. Also data was not present in the Analytical Store database.
In log viewer I have found the bellow error.
HIGH -
SearchServiceApplicationProxy::GetAnalyticsEventTypeDefinitions--Error occured: System.ServiceModel.Security.MessageSecurityException: An unsecured or incorrectly
secured fault was received from the other party.
UNEXPECTED - System.ServiceModel.FaultException`1[[System.ServiceModel.ExceptionDetail,
System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]]: We're sorry, we weren't able to complete the operation, please try again in a few minutes.
HIGH - Getting Error Message for Exception System.Web.HttpUnhandledException
(0x80004005): Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> System.ServiceModel.Security.MessageSecurityException: An unsecured or incorrectly secured fault was received from the other party.
CRITICAL - A failure was reported when trying to invoke a service application:
EndpointFailure Process Name: w3wp Process ID: 13960 AppDomain Name: /LM/W3SVC/767692721/ROOT-1-130480636828071139 AppDomain ID: 2 Service Application Uri: urn:schemas-microsoft-
UNEXPECTED - Could not retrieve analytics event definitions for
https://XXX System.ServiceModel.FaultException`1[System.ServiceModel.ExceptionDetail]: We're sorry, we weren't able to complete the operation, please try again in a few minutes.
UNEXPECTED - System.ServiceModel.FaultException`1[[System.ServiceModel.ExceptionDetail,
System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]]: We're sorry, we weren't able to complete the operation, please try again in a few minutes.
I have verified few things in server which are mentioned below
Two timer jobs (Microsoft SharePoint Foundation Usage Data Processing, Microsoft SharePoint Foundation Usage Data Import) are running fine.
APPFabric Caching service has been started.
Analytics_GUID folder has been
shared with
WSS_ADMIN_WPG and WSS_WPG and Read/Write access was granted
.usage files are getting created and also the temporary(.tmp) file has been created.
uasage logging database for uasage data being transported. The data is available.
Please provide pointers on what needs to be done.

Hi Nabhendu,
According to your description, my understanding is that you could not use popularity trend after you migrated SharePoint 2007 to SharePoint 2013.
In SharePoint 2013, the analytics functionality is a part of the search component. There is an article for troubleshooting SharePoint 2013 Web Analytics, please take a look at:
Troubleshooting SharePoint 2013 Web Analytics
http://blog.fpweb.net/troubleshooting-sharepoint-2013-web-analytics/#.U8NyA_kabp4
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Date not being displayed in the custom format

Hi ,
I have a problem wherein i am unable to change the format of the date.
I need the date to be in the format 'January 10,2010.' however the date is being displayed as '1/10/10'. I have tried all options for the date formatting. I specified the custom format as 'MMMM D,YYYY' as mentioned in the SAP Library. I am trying to use the std custom options like YYYY-MM-DD, the date is not being dispalyed in the custom format provided by SAP either.
I have binded date from the context, used the Current Date field provided by SAP. Nothing works.
Its not working on the new form. However the old forms have the same kind of formatting and are being displayed as desired.
Please suggest as to what the issue could be.
Thanks,
Soumya.

Hi All,
Even I'm encountering the same issue. I'm trying to control the outputted date format programmatically.Please have a look.
data: v_int_date like sy-datum,
v_ext_date(10).
v_int_date = '20110201'
write v_int_date to v_ext_date MM/DD/YYYY.
Here I've tried to convert the date to external format using a fixed format(MM/DD/YYYY). But still it's getting outputted in the format DD/MM/YYYY only as that's the way its defined in the User Master!
Is there any solution for this? How can I 'override' defaults in the SAP User Master?
Thanks,
Mahesh

IView is not being displayed in full page

I created one iView, added it into a page. I set the layout as 1 Column Full width. My view is not being displayed in entire window. What kind of property, I should set in the page.

Sunil:
By default, the iView's height property is fixed. After I changed iView's height property to Full page, The page displays correctly.
I setup two views in one page using one column Full width. Both the iviews are setup in one page. Now both the iViews height is set up to Full Page as well as page's height is setup to Full page. Now, the Top iView is being displayed with 3/4th of window size and bottom iView is being displayed with 1/4th of window size. I want to display both of them with equal size.
Thanks for your help.

Debugger Problem: Full data is not displayed in the fields of the ITAB

Hi Guys,
I am having a problem related to ABAP Debugger. Data is not fully displayed in all the field of the internal table. I am using SAPGUI 640 with ECC6. In the debugger I have increased the width (size) of the column but still data is not fully displayed.
Below is the example:
*Actual Data*        *Displayed As*
1141               11...
P42X13             P...
Testing            Tes...
When I bring the curson on the displayed incomplete data, the full data is shown in small popup window.
I have increase the size of the column but still it is not showing the complete data.
I have to download the internal table data to an excel spreadsheet to view the complete data.
Please help.
Thanks,
mini

I cannot use SAPGUI 710 as my company is not upgrading it to 710. We have to live with 640 for now.
SAPGUI details are as follows:
Name............: saplgpad.exe
Description.....: SAP Logon Pad for Windows
Product version.: 640 Final Release
File version....: 6405.5.21.1020
Build number....: 855417
Please help if you can. This is very frustrating.
Thanks.

Sections of report not being displayed on some systems

Post Author: jlutz
CA Forum: General
Hello... strange issue... We have these Crystal 11 reports deployed that are being called via a VS .NET 2005 application. The reports display fine on most systems, but on some systems (Dells, a few years old, 512mb of ram), sections of the report are not being displayed. For example, on one report parts of the header are not displayed, nor is some of the subtotal sections etc.However, if they zoom to 75%, they can view the subtotal section but the header part disappears. Additionally, if they export or print the report, it comes out just fine! Any idea what could be going on here? Thanks!

Post Author: PeterLiebich
CA Forum: General
I have issues in ReportDesigner when I have my hardware acceleration set at maximum try reducing it. Goto
ControlPanel-> Display Properties (settings Tab) -> Advanced Button -> troubleShoot tab. I had to set my down by 4 notches before it worked. - Try setting it to none to see if it fixes your issue

Full data is not being display in report for "LANGUAGEINDEPENDENT_EXTENDED_Text" type field

Similar Messages

Maybe you are looking for