Full HD with ATI HD 4670

I have a HD 4670. My requirement is to have 1920×1080 hd resolution (16:9) up and running. I don't care about compiz or whatever.
I have tried both open source drivers (ati and radeonhd). According to xrandr none of them seems to be able to display full hd. Is it right ?
I have ended up installing catalyst and catalyst-utils. I think these packages end up downloading twice the ATI driver from the ATI web site. Does it make sense ?
A part from this, it works nicely. except that the screen sometimes flicks on the above right side of the screen. This is specially obvious when I have a blank screen (whatever the color is). And it is a real pain.
FY: I am using the latest catalyst version : 9.8.1 with the arch kernel 2.6.30. Direct rendering works fine according to "glxinfo | grep direct". Following the wiki, I have generated a xorg with aticonfig and did not bother modifying it. I am using xmonad.
Despite the excellent ATI wiki entry, I have found it rather difficult to understand how to get a proper ATI driver working to support full hd. For instance, I am not sure if both ati and radeonhd are supposed to handle it or not.
I have been reading many of the catalyst comments but it is not always easy to make sense of them. Is there a dedicated help page for catalyst and catalyst-utils. I realise that the install procedure is kind of changing at each version and it is probably a real pain to offer a decent support here.
Is there any obvious check I could try ? Is the future brighter with kernel 2.6.31 ?
So this is just a cry for help. In any case, it should be viewed as a critics toward Arch, the Aur package or whatever. On the contrary thanks so much for your work.
PS I have duplicated this post realizing it was probably harder to search for info in the huge ATI Bar & grill post. Sorry for the inconvenience.

Hey PierreR,
I agree with you the ATI wiki is difficult to understand, more over there is a interesting but equally incomprehensible mega post ATI Bar & Grill. I have Dell XPS 1640 with Radeon Mobility 4670.
I (like Andrwe) recommend the xf86-video-radeonhd-git. But and interesting in getting 3d acc to work for Kwin or Compiz woteva any help with that would be great.
But I here is copy of my xorg.conf with 1080p working modify and enjoy I hope
ection "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "dri2"
Load "dbe"
Load "dri"
Load "extmod"
Load "record"
Load "glx"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "AccelMethod" # [<str>]
#Option "offscreensize" # [<str>]
#Option "SWcursor" # [<bool>]
#Option "ignoreconnector" # [<str>]
#Option "forcereduced" # [<bool>]
#Option "forcedpi" # <i>
#Option "useconfiguredmonitor" # [<bool>]
#Option "HPD" # <str>
#Option "NoRandr" # [<bool>]
#Option "RROutputOrder" # [<str>]
#Option "DRI" # [<bool>]
#Option "TVMode" # [<str>]
#Option "ScaleType" # [<str>]
#Option "UseAtomBIOS" # [<bool>]
#Option "AtomBIOS" # [<str>]
#Option "UnverifiedFeatures" # [<bool>]
#Option "Audio" # [<bool>]
#Option "HDMI" # [<str>]
#Option "COHERENT" # [<str>]
#Option "ForceLowPowerMode" # [<bool>]
#Option "LowPowerModeEngineClock" # <i>
Identifier "Card0"
Driver "radeonhd"
VendorName "ATI Technologies Inc"
BoardName "Unknown Board"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
This was just made with Xorg -configure, so good luck let me know how you go ?
Mac
Last edited by Mac Tzu (2009-09-07 12:49:59)

Similar Messages

Premiere CS4 freezing with ATI 4850

My system:
Intel Core i7-920 Bloomfield 2.66GHz
EVGA 141-BL-E757-TR LGA 1366 Intel X58 ATX X58 SLI
Corsair 750W PSU
6GB DDR3
and I've upgraded from a Geforce 7800GT to an ATI XFX Radeon HD 4850.
Adobe Premiere CS4 freezes after a minute or so of playback with my ATI HD 4850. The screen literally freezes and I have no choice but to force a reboot. On my Geforce 7800GT, the playback is laggy/unresponsive but it never froze.
I've sent it in to XFX for repair previously because it wouldn't play back any HD video files. But now everything plays fine except playback in Adobe Premiere. XFX even sent me a benchmark test for Devil May Cry and because my computer passed, they refuse to RMA the card again.
I've tried EVERYTHING!
- Several different versions of the drivers: 10.4,10.3,9.11, all with no luck.
- Enable ATI Overdrive: when I auto-tuned it, it immediately crashed my computer and would do so consistently upon start-up so I had to disable it.
Any advice/comments/feedback would be greatly appreciated.
This is my second ever ATI card and I must say I've been very disappointed. I have never been able to have one work 100% for even a full 24 hours!!!

I had issues with my Radeon 4670, similar but not quite the same as yours. In my case, rolling back drivers to 9.11 was the solution, but it sounds like you've already attempted that. If that hasn't solved the problem, and you're only seeing the issue after a minute or so of running PPro (my issue revealed itself immediately), I would look at a cooling/overheating problem. The newer GPUs (even though the 4000 series isn't that new) run hot even when they're not doing anything, and once you put them under any sort of load, the temperatures skyrocket. And since yours crashes during the auto-tuning, this lends more creedence to this theory; I was able to clock mine all the way up, but it's got a big honkin' aftermarket cooler on it.
I'm assuming you didn't send your whole PC in when you RMA'ed the card, so, 1) you don't know what kind of setup they tested the card in and 2) you don't know if they tested the card at all. For all practical purposes, this card should work "fine" with CS4, so the likelihood increases that there is some sort of physical defect with the card or cooling. Other folks here have a better grasp of the hardware and how to get the most from it (I'm more of a plug-it-in-and-hope-it-works kind of guy), so they might be able to tell you some ways to test the card and check its operating temperatures.

Crash with ATI Radeon X1900 XT and second HD display (DVI) ?

hi ! i have a realy tough one for you guys : since 3-4 days i've been getting this realy strange (and scary!) kernal panic screen / crashes / freeze with my macpro dual 2.66 with ati radeon X1900 xt.
the crashes keep coming while doing extensive work (video converting, renders) or just letting the macpro running doing nothing much all night long...
now this is what i found for now : if i disconect my 2nd display (samsung syncmaster 2493hm HD in DVI 1080p) it seem to be stable. when i reconnect it sometime it can run again with this 2nd display for a while but when i leave a render all night long the next morning it will be frozen, nothing on screen (all black).
after rebooting it get this crash report from the system :
Maccinachheeke-pabcapk cat0etiabies 0x00000000000000000000006:
6 ereerr--i oporgingngnkbeaachineck Maehik ne-a0h0h ck stat00t000000000 r0es0
reteattartPvvl Ili maaliceicdn mchk aiog eproMh
rekroi-MCpor reorrosg-:
porttMCrSTregt(i_MC 0xSTATUS(er40_S x20210(0x0nv0TalU00xx002in000iS10000002405)100l00U I0nva0M 0xS
IS(0x0A30:_M0U2(00ATU5S(2xx00200TA00000x00400000IAinv2li00lC
20IAA00200_inv0xid
0IA3: 3_d0000AT0)000000d)0000n00a00d000nA0v0l0d
I3S22_v4USi3SIA0411): 0400 0x0U0000020000 00100 00vl00
0 I0A3011CivAA32_SM_441SxTUTb0004100)000vb01001iA 00led 0I cva00 i e r cI:S(0xe0 1 ):(0 : 041e5)b x000b 800de:fix 4arrld
Mo MAA e8atr code inf 00: 0 0x00 St
00s00ode
spSccifsic codr
texr ccorre02sor:
0 8O4x0
r erder in orrmt n ded0000: 0x1rp0000Satus bitts:
b 0ts:4ssor PMroexce Chtsscorrupt, tconad:
e0x3re1cor,rtr epo:bl ed err: E0)roncirters0: 0
8ernc0ro,rrR2: 0xected error
CR3: 0x00e7a000, CR4: 0x000006e0
EAX: 0x24f9bed8, EBX: 0x1a6f198a, ECX: 0x1a6f198a, EDX: 0x004bc870
ESP: 0x24f9bebc, EBP: 0x24f9bf08, ESI: 0x00001e27, EDI: 0x035e1718
EFL: 0x00000006, EIP: 0x0019e9c0
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x439d58 : 0x128d0d (0x3cc65c 0x439d7c 0x131f95 0x0)
0x439d98 : 0x1a42cb (0x3d27fc 0x0 0x35e1718 0x12)
0x439f58 : 0x19c103 (0x439f70 0x0 0x0 0x0)
0x24f9bf08 : 0x135888 (0x1a6f164f 0x35e3d40 0x3f91084 0x2)
0x24f9bf58 : 0x1359c9 (0x13d8a2 0x0 0x0 0x19e23a)
0x24f9bf78 : 0x13da53 (0x13d8a2 0x0 0x0 0x0)
0x24f9bfc8 : 0x19b21c (0x0 0x0 0x19e0b5 0x4ebf4c0) Backtrace terminated-invalid frame pointer 0x0
Kernel version:
Darwin Kernel Version 8.11.1: Wed Oct 10 18:23:28 PDT 2007; root:xnu-792.25.20~1/RELEASE_I386
Model: MacPro1,1, BootROM MP11.005C.B04, 4 processors, Dual-Core Intel Xeon, 2.66 GHz, 2 GB
Graphics: ATI Radeon X1900 XT, ATY,RadeonX1900, PCIe, 512 MB
Memory Module: DIMM Riser A/DIMM 1, 512 MB, DDR2 FB-DIMM, 667 MHz
Memory Module: DIMM Riser A/DIMM 2, 512 MB, DDR2 FB-DIMM, 667 MHz
Memory Module: DIMM Riser B/DIMM 1, 512 MB, DDR2 FB-DIMM, 667 MHz
Memory Module: DIMM Riser B/DIMM 2, 512 MB, DDR2 FB-DIMM, 667 MHz
AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x87), Broadcom BCM43xx 1.0 (4.170.13.1)
Network Service: AirPort, AirPort, en2
PCI Card: ATY,RadeonX1900, Display, Slot-1
Serial ATA Device: ST3250820AS P, 232.89 GB
Parallel ATA Device: OPTIARC DVD RW AD-7170A
USB Device: USB2.0 Hub, Up to 480 Mb/sec, 500 mA
USB Device: Hub in Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 500 mA
USB Device: USB RECEIVER, Logitech, Up to 1.5 Mb/sec, 100 mA
USB Device: Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 250 mA
FireWire Device: built-in_hub, unknown_value, Unknown
FireWire Device: GSA-5163D Super Multi DVD Rewriter, HL-DT-ST, Up to 400 Mb/sec
FireWire Device: My Book Device, WD, Up to 800 Mb/sec
here's my complete config if it can help :
Model Name: Mac Pro
Model Identifier: MacPro1,1
Processor Name: Dual-Core Intel Xeon
Processor Speed: 2.66 GHz
Number Of Processors: 2
Total Number Of Cores: 4
L2 Cache (per processor): 4 MB
Memory: 2 GB
Bus Speed: 1.33 GHz
Boot ROM Version: MP11.005C.B04
SMC Version: 1.7f8
ATI Radeon X1900 XT:
Chipset Model: ATY,RadeonX1900
Type: Display
Bus: PCIe
Slot: Slot-1
PCIe Lane Width: x16
VRAM (Total): 512 MB
Vendor: ATI (0x1002)
Device ID: 0x7249
Revision ID: 0x0000
ROM Revision: 113-A52027-140
EFI Driver Version: 01.00.140
Displays:
SyncMaster:
Resolution: 1920 x 1200 @ 60 Hz
Depth: 32-bit Color
Core Image: Hardware Accelerated
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Rotation: Supported
Television: Yes
S/M 955SL:
Resolution: 1280 x 1024 @ 75 Hz
Depth: 32-bit Color
Core Image: Hardware Accelerated
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Rotation: Supported
anyone ever see this problem ? at 1st it seem to be related to my ATI card... but i'm no expert so if anyone can understand part of the crash log let me know ! thanx !!
also forget to say : did all the full apple hardware test + tech tool pro test (app that come with apple care) and nothing was wrong, all ok.
+
francis.t
montreal
Message was edited by: francis.t

Are you really still running 10.6.3? you will need 10.6.5+ so do that and make a clone.
ATI 5770 from Apple Store - like 1000s of others have done and in the comments section on the store page.

Incompatibility with ATI Radeon HD 4870

Hi, using Aperture 3 Trial (I'm waiting the deliver of full one from AppleStore) with few Canon RAW images I've experienced very often crash of the application and two kernel panic (sad), especially using brush tool like skin smoothing:
0x98c93fc8 : 0x29e44d (0x2113c164 0x1 0x10 0x0)
Kernel Extensions in backtrace (with dependencies):
com.apple.ATIRadeonX2000(6.0.6)@0x99753000->0x998adfff
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x8eea3000
dependency: com.apple.iokit.IONDRVSupport(2.0)@0x98cfc000
dependency: com.apple.iokit.IOGraphicsFamily(2.0)@0x98958000
After that I've tried to replace the ATI Radeon HD 4870 with my old Nvidia 8800 GT and the crashes are disappeared completely, also the kenel panic.
The 8800GT however is noticeable slower than ATi 4870 and Aperture3 is very slow with ATi, sadly slow with 8800 GT: using brush skin tool with zoom 1:1 (Z key) with color overlay and RAW images give refresh from a stoke to other until about 2 minutes! Unusable.
Also in that "wait state", activity window always reports: Generating Thumbnails (every says that)
Sorry to see that, because quality and features in this version are very exciting!
Maybe most other issues are mainly connected to graphics drivers.

Before report to Apple I would like to find most precisely the reason for the crashes :/
In those days I'm going to be crazy...
Now I've had aperture crash, some time, also in 1920x1200, so maybe resolution is a false positive :/
The last trials booting in 64 Bit kernel:
- ATi - Aperture crash during editing RAW file from canon 50D 7D and 5D mark II
- ATi - No crash editing jpegs
- ATi - kernel panic on ATi kernel module during editing RAW file from canon 50D 7D and 5D mark II
- ATi - Black screen and CPU/GPU hang editing jpegs
- NVidia 8800 - Aperture crash during editing RAW file from canon 50D 7D and 5D mark II (with 64 Bit kernel is a bit faster)
- NVidia 8800 - no kernel panic
- NVidia 8800 - no hang editing jpegs
I've tried editing the same kind of RAW file on the macbook pro 17" C2D and Aperture crashed...
So, maybe is a combination between RAW file (crash Aperture) and ATi under pressure (kernel panic & hang)
p.s under macbook pro (ATi Radeon X1600), during edit, often the screen become corrupted
On macpro, I've tried also 64 Bit kernel and 32 Bit Aperure, but RAW file editing hanged anyway.
Interesting the use of memory in 64 vs 32 bit, at 64 Bit (Aperture not kernel) editing a 5D mark II RAW file rise the memory up to 6 GB ram !!! in 32 Bit mode the same image and the same filtering reach only 3 GB of ram
weird

ITunes 10.4 full screen with Win7-64bit doesn't work correctly.

iTunes 10.4 full screen with Win7-64 doesn't work correctly. I have the Windows taskbar on the left side of my screen. Maximized iTunes is panned to the left.

Same issue here. When the Windows taskbar is position on the top of the screen and then the iTunes windows is maximised, it's position is as if the Windows taskbar is at the bottom of the screen so the top of the iTunes window sits under the taskbar.
For those wanting a workaround, hold shift and right click the iTunes icon in the taskbar/quick launch bar and click restore, at least then you can adjust it to be full screen manually.
System:
Windows 7 Ultimate x64
iTunes 10.4
ATI 5750 video card

ATI Raedon 4670 Support

Does anyone know if the ATI Raedon 4670 is supported on the Mac Pro. Are there any drivers available, supported or not÷

No. Only the ATI 3870 Mac/PC Edition is supported along with the three cards provided from Apple. No other video cards have the required EFI boot ROM needed for OS X.
Other third-party cards may be installed additionally but can only be used for Windows.

Embarrassing problem with ATI HD 5850 (Noise + Drivers)

Hi all. First of all let me warn you that I'm French so sometimes my english will probably be inaccurate.
I experience some problems with my graphic card, a MSI ATI Radeon HD 5850, my screen is a Samsung Syncmaster 2233rz.
The drivers I got with my box was the 9.12 version (something like that).
Here are the games I installed :
Quake 2
Quake 4
Quake Live
Killing Floor
Painkiller
Bioshock
Fear
Fear 2
Starcraft
I did some tests with some of them.
With the basic drivers for the CD of the box :
Quake 2 : Doesn't appear in fullscreen mode, or with awful colors, but if I put the opengl option in the video settings then it's ok.
Quake 4 : Seems alright, but I had to choose a particular resolution or the game would just appear in a small windows in the center of the screen.
Starcraft : The game is horrible, appears in a small window in the upright corner of the screen and with terrible colors.
Quake Live : Seems ok but difficult to find a good resolution so that the image takes the whole screen.
Fear 2 : Seems alright...
Now here comes what disturbs me :
Fear : Horrible sound when I enter the menu that comes from the graphic card. Like a whistling sound, like a teapot getting hot.
Painkiller : Same horrible sound, even louder.
This sound was terrible and I wanted to get the window streched out so that Starcraft and other games would appear in fullscreen mode automatically (I couldn't enable it in ATI Catalyst).
So I installed drivers 10.6 :
Quake Live : Problem with some colors, I heard 10.5 and 10.6 wasn't compatible with Quake Live...
Okay...
So I installed 10.4 :
Possibility to make the screen strech in the Catalyst menu so Starcraft was ok.
Fear : Terrible sound in the menu and game + the game crashes (frozen screen) after 30 seconds of gaming.
Painkiller : Terrible sound in the menu, didn't even play.
Quake 4 : Was pretty much okay, only little annoying sound, but crashes after 30 seconds of gaming (same as Fear).
Quake Live : Ok.
Quake 2 : Was pretty much okay, I could play in fullscreen with the opengl thing.
Fear 2 : All seems ok ( !!!!????).
So...I was pissed off because of Fear and Quake 4 crashes.
Then I went back to the 9.12 version :
Quake 4 : Unlaunchable (LOL, it was ok before I installed 10.6 and 10.4...?????????????????????)
Quake 2 : Impossible to go in OpenGl mode (Was possible previously...?????????????????????)
Fear : Horrible sound but the game doesn't crash it seems.
Fear 2 : Seems ok (good game ^^)
Starcraft : The game is horrible, appears in a small window in the upright corner of the screen and with terrible colors. -> Impossibility to activate the automatic stretching again it seems.
Painkiller : Horrible sound, didn't try to play.
Quake Live : Ok.
What can I do ? I'm currently downloading the 10.1 patch. I want to play all the games, not 3 out of 10 with each patch,
and what is this horrible noise my graphic card seems to do when I play some games (not even all...) ? I try to put the fans at maximum with ATI Overdrive (smthing like that) and that sound wasn't here, so where does it comes from...that's a mistery.
If somebody can be of any help I'll be really happy. I have no problem with the sound if that doesn't mean that the card has a problem and will probably explode one day, but the crashing sound and OpenGl problems and all...
What would you advise to that I get a perfect intallation of the 10.1 version ?
P.S : Thanks, of course !

Quote from: Infuscomus on 07-July-10, 22:44:37
I just stopped the test because it was 52 minutes already...
I did the test with render open GL 3, now I'm going to do it with open Gl 2
I chose full screen 1680 x 1050 and MSAA 8x
Maximum temp : 64°, mini 44°, it stayed between 60 and 63 in general.
Average fps 3xx, maximum 41x, mini 12x.
Well your VGA is fine then
Quote
Now here is what I experience when I play those games :
Quake 4 : Crash after 30 seconds - 1 minute of playing, grey screen with green bars or just frozen screen. I have to alt + tab and use ctrl + alt + del to close it.
FEAR : Huge noise from the graphic card in the menus, like a teapot whistling, and screen freezes after 30 seconds of playing : alt + tab -> The display driver AMD driver has stopped responding but have been recovered blablabla".
Bioshock : After the intro movie, I hear the sound but the screen is black permanently, I have no other solution than reseting my PC.
Painkiller : Huge noise from the graphic card in the menus, like a teapot whistling, and screen freezes after 30 seconds of playing : alt + tab -> The display driver AMD driver has stopped responding but have been recovered blablabla".
Fear 2 : All seems alright.
Starcraft : Dito.
Quake Live : Dito.
Quake 2 : Dito.
Killing Floor : Dito.
Look for latest game patches, try different VGA drivers if needs too.
It's not hardware issue.

How can I print just a part of the page and not the full page with Adobe Reader v 10.1.2?

how can I print just a part of the page and not the full page with Adobe Reader v 10.1.2? I need to print a engineering print with lot of information but information is too small in letter size and I don't have a plotter.

Two ways to print a portion of a page: zooming or using the Snapshot Tool.
ZOOMING:
Zoom into the area you want to print.
Click the Print icon.
Under "Pages to Print", make sure "Current view" is selected under "More options" (you may need to click "More options" to open it).
If you aren't satisfied with the preview, try clicking "Fit" under the Size button.
SNAPSHOT
Choose Edit > Take A Snapshot.
Drag a rectangle around the area you want to print.
Click the Print icon.
Under "Pages to Print", make sure that "Selected Graphic" is selected under "More options".
To enlarge the snapshot to fit the sheet of paper, choose "Fit" under the Size button.
Hope this helps!

Problems with ATI Radeon HD 2600, electrical interference or flickering pix

Problems with ATI Radeon HD 2600, electrical interference or flickering pixels
I have a Macro 8 core purchased just 4 months ago with the ATI Radeon HD 2600. Just started getting what looks like electrical interference or flickering pixels all over the screen. It gets worse and worse to the point where i see and cant work then clears up for an hour and then comes back.
If I change the resolution from 1680x1050 to 1600x1200 everything looks fine and the problem goes away.
Monitor works fine on two other computers, driver is up to date.
Would like to upgrade at some point just disappointed that I’m already having problems.
Any suggestions would be very helpful, in the mean time I’ll searching the forums.
Thanks,

When you called Applecare or went to a Genius bar were they of no help?

Only the first page is printed reduced as setup. All pages afterward are full size with information cut off. Recent problem. Can print from Safari just fine. How can I get all pages to be reduced size?

Question
Printing internet pages
Reduced print size
Only the first page is reduced and printed as desired
All pages after the first page are full size with information cut off
Recent problem never seen before
Can print from Safari and other software just fine
How can I get all pages to be reduced size?

One suggestion worked from the Firefox prints incorrectly link mentioned above by mha007. I'm thrilled since this has been annoying me for weeks. Thanks mha007!
Reset all Firefox printer settings
# Open your profile folder:
# On the menu bar, click on the Help menu and select Troubleshooting Information. The Troubleshooting Information tab will open.
# Under the Application Basics section, click on Show in Finder. A window with your profile folder will open.
# Note: If you are unable to open or use Firefox, follow the instructions in Finding your profile without opening Firefox.
# On the menu bar, click on the Firefox menu and select Quit Firefox.
# In your profile folder, copy the prefs.js file to another folder to make a backup of it.
# Open the original prefs.js file in a text editor (such as TextEdit).
# Remove all lines in prefs.js that start with print. and save the file.
# If something goes wrong when you open Firefox, close it again and overwrite prefs.js with the backup you made.

Custom PC with ATI 5670 xfx is not working with APPLE cinema 24"

I need help using my apple cinema 24"
my setup is the following:
i7 custom built with ati 5670 xfx (with display port)
running windows 7 64 bit ultimate
I bought a displayPort to mini-display port cable. When I plug everything in, my apple 24" cinema is not turning on ?
can someone please help me out, Thank you.
PS. Seem like people are saying the new ATI radeon 5000 series is not compatible with apple 24" Anybody has a solution to this ? Thank you.

Hi,
I already reply you in fredtorrey post.
But if you don't want change that card you will need buy atlona adaptor.

Display aspect ratio in T400 with Ati

When I put a program into fullscreen mode with Ati, it stretches the program's display aspect ratio wrong. Ati should have some kind of way to change this in the Catalysts but I can't find it. In basic mode it says you need to put the manager to advanced mode to change it and then in advanced mode there just simply isn't such an option. So how can I change this. And also I can't just go to upload the drivers because god only knows which driver versions work with switchable graphics and which don't. I'm using Win7.
Well, at least it seems that I still have a good reason to tell ppl to avoid anything which has something to do wtih AMD or Ati.

Do Image>Resize>Image Size (this is in PSE2, it might be different in PSE4). Enter 1 in either the Width or Height box, and the other value will be adjusted accordingly. Then click the Cancel button!!

HT6114 my audio is being funny on my mac. It is brand new, and hasn't had trouble since this update. It gets stuck at full blast with a / though it. then no audio comes out. Once I turn it off it fixes it self thouhg.

my audio is being funny on my mac. It is brand new, and hasn't had trouble since this update. It gets stuck at full blast with a / though it. then no audio comes out. Once I turn it off it fixes it self thouhgh, or if I wait a while it finally fixes it's self. If this happening to anyone else?

I don't think that is normal behavior. The long press is possibly causing the system to force power down, which would then allow it to power back up.
Just to make sure, all drivers are up-to-date? Are there pending BIOS updates? If so, you'll want to make sure it can restart properly before applying the BIOS update
Try an Ubuntu LiveUSB or LiveCD to rule out software issues.
If that doesn't work, try taking out the battery and AC, pressing the power button ten times, then holding it for ten. This is usually the remedy for another issue, but try it anyway.
If that doesn't work, then try resetting the BIOS settings. Then try unplugging the CMOS battery overnight. Otherwise, might have to call for warranty.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

Mac Pro 5.1 (Mid 2010) with Ati Radeon 5870, I can't install Maverick, don't support the graphic driver

I have a Mac Pro with Ati radeon hd 5870 1024 MB, after the first reboot in the installation of Maverick, the screen does strange things as if the driver does not support.

Hello pitin,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
You can reset the Mac's parameter RAM and SMC.
Best of luck,
Mario

I have PS 4,5,and 6 installed on my Macbook Pro as well as Lightroom 4 and 5. Can I remove PS 4 and 5 and LR 4? PS 4 is the total install and PS 5 and 6 are upgrades. LR 4 is the full package with LR an upgrade.

I have PS 4,5,and 6 installed on my Macbook Pro as well as Lightroom 4 and 5. Can I remove PS 4 and 5 and LR 4? PS 4 is the total install and PS 5 and 6 are upgrades. LR 4 is the full package with LR an upgrade.
I need space!

First let me disabuse of a misconception: All Adobe upgrades are FULL installers. Whether you buy them as upgrades or new versions does not make an iota of difference. The upgrade installers do not need to find a prior version installed, they just prompt you for the old serial number as well as the old one, and they do not rely on the old version in the least.
Second, the time to uninstall an older version is BEFORE upgrading to a newer one. Otherwise, the uninstaller from the older versions will mess up with your new install. There are a gazillion files that are named the same and in the same locations as the new one.
Your best bet now is to uninstall ALL the Photoshop versions you have installed, including the newest one, one by one, then run the Adobe CS Cleaner Tool, then run Repair Permissions from Apple's Desk Utility, and finally re-install the latest version.
The other alternative, if your boot HD is large enough (very doubtful in case of a laptop like a Mac Book), is to leave all versions on it.
Your choice.

Full HD with ATI HD 4670

Similar Messages

Maybe you are looking for