Full screen video blank and aac music stutters!  iTunes 7.0.1

When listening to music, the sound will sometime just stop, the music is not paused and the playback time counter at the top of the screen is stuck. Menus in the program still work, but until the program is restarted, the music will not resume. I tried disabling crossfade and made sure my sound drivers are up to date. There is plenty of RAM and CPU resources available to iTunes. I went into the Quicktime control panel settings and tried all the compatability settings for directX and still have had no luck. It will happen anywhere from 20 seconds to 20 minutes after iTunes is started. iTunes was my choice for a long time until the last few updates. Also, there is no video when trying to use full screen mode. Works fine in the preview mode only. I have uninstalled both iTunes and Quicktime and rebooted. I am about ready to give up and move to URGE. I fell as though I am wasting money anymore.
-logan

kg4icn
For future reference, here is the link to the Toshiba support page for your computer. This is where you go to get driver updates for your hardware. But you're right that there are no video or audio driver updates for your machine.
According to the website, you have a Intel Graphics Media Accelerator 950 video controller, but it didn't say what your audio hardware was. If you go to the audio control panel (Windows Start menu -> Settings -> Control Panels), what does it say is the first "Volume" tab at the top of the Panel. That should be the current audio device. For example, mine says "SoundMax Digital Audio" What does yours say? The detailed specifications on the Toshiba page only tells me the family of the audio controller — Intel High Definition Audio — not the device manufacturer.

Similar Messages

  • Bug? Menu Bar Not Accessible in Safari After Watching Full Screen Video

    Hi everyone,
    I have had this Not accessible menu bar problem time to time while using Safari, and I finally figured out what caused it. It always happens right after you go to a full screen video mode, and then get back out, and now when you move the mouse curser to the top, menu bar doesn't show. Then a way to fix is by using the 4 finger gesture to go back to the desktop screen, and come back to safari (not too fast) and menu bar is again accessible. Why is apple not fixing this bugs? I have seen more thread about menu bar gone, so it's not just me.

    QuickTimeKirk wrote:
    Hit the escape key to exit full screen.
    That may be a "works as expected/designed," but once you've exited Full Screen View, then reenter Full Screen View and play a video in full screen mode, the window switches out of Full Screen to display the video in full screen video mode. It doesn't stay in Full Screen view, like it is the first time around.
    EDIT:
    Esc exits full screen video mode, but you still cannot access the slide-out menu bar with the button. Repeatedly pressing Esc does not exit Full Screen View, either. This only appears on the first invocation of Full Screen view and video mode. Once you exit Full Screen, the window behaves differently.
    Note that we have determined this is only affected by HTML5 video. I have to do some more testing to figure out if it is ClickToPlugin that is causing the issue.
    What's a good source for straight HTML5 video?

  • When i select the Full Screen option in video streams (like youtube, veoh, anything like that) i can do that 1 time 2nd time the screen goes blank and can only exit it with the Esc button and then i have to restart firefox and again i have my one Full ...

    When i select the "Full Screen" option in video streams (like youtube, veoh, anything like that) i can do that one(1) time second(2nd) time the screen goes blank and can only exit it with the escape(Esc) button and then i have to restart firefox and again i have my one "Full-screen Ticket"

    I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
    When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
    At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
    I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

  • My MacBook is brand new, shy of a month and I don't understand why it was recently started to lag whilst watching full screen videos on youtube? Somebody help me please...

    Somebody help.. I don't get what's going on. This didn't happen in the beginning, it was completely fine with watching full screen videos, but now it seems to "glitch" now and then and appear slow and laggy. whattttt

    If the computer seems normal except for watching youtube the problem is probably between you and your ISP or between the ISP and youtube. If your computer seems slow no matter what you are doing try restarting your computer and see if that helps. (If so pay attention to your Page Outs in the Activity Monitor and also how much free space your hard drive has.)

  • How do i get my videos to be full screen when editing and viewing on ipad 2

    How do i get my videos to be full screen when editing and viewing on ipad 2. When editing videos in imovie the video isnt zoomed in all the way, this is with imported videos as well as ipad videos... Please help!!

    Oh, unless you shot tall.
    If you shoot vertical/tall video it cannot be zoomed all the way out in the exit.
    Shoot wide, or edit in a different editing app.

  • T42 Vista and Full screen video

    How can I enjoy full screen video when viewing videos from myspace,youtube and so on I get no full screen support how can this be done?

    If there are other applications for wich you might use flash, you should keep flashplugin installed.  You can use /etc/chromium/default to append some flags to tell chromium to use the pepper-flash plugin instead.   In fact, I think that the chromium-pepper-flash package might actually do this for you in the install scripts.

  • TS1382 my ipod got wet and allow time to dry, I turn now the musics and sound and everything but the screen is blank and nothing is visible. a solution please urgent.

    my ipod got wet and allow time to dry, I turn now the musics and sound and everything but the screen is blank and nothing is visible. a solution please urgent.

    See my reply to your other post

  • Lenovo 3000 N200 0769 Vista 32bit video driver (NVidia) full screen video problem

    Hi, would appreciate an update from Lenovo about this.
    The NVidia VGA driver just displays a blank screen when playing video in full screen mode when hardware acceleration is turned on (the default setting). Obviously it's a pain to turn off the hardware acceleration just to get full screen video working.
    There is a generic version of the driver available from Nvidia but they advise not to use it as the oem versions are apparently modified for features like turning the screen off when the lid is closed. Maybe someone's tried the generic NVidia driver and can let me know if it's worth a go. Ideally it would be nice to hear if Lenovo are aware of the problem and are going to release an update.
    Thanks
    Cliff

    im not sure if this will help new to forum but hey here u go anyways scan through the guide about the suipport & downloads should have all ur info there
    http://forum.lenovo.com/lnv/board/message?board.id=N_Series_Lenovo_3000&message.id=2652

  • Run full screen video with GarageBand

    Good evening.
    I have a question about using GaraBand with full screen video.
    I'm creating a movie using Final Cut Pro (which's new for me) and creating a music track in Garageband.
    I will like to have GarageBand to play the music in one track, using an interface I will send a click to the drumer but also ( and this is part of my question), I need to have GaraBand to play the sync movie I created, on a video beam running in full screen.
    The goal is to manage the application in my laptop but the people should not see the application or anything on my desktop, they should be able to see just the video after I hit play.
    So, is there a way to have GarageBand to send a clik to the drummer mintor, play the sound track and do split monitor on a video beam that should show just the full screen movie and not my desktop?
    I will really appreciate any suggestion about this.
    Note: I have Logic Pro 8 too, in case logic supports it.

    Thank you for taking a look into this question Chris.
    This is the very first time I'm trying to do this type of presentations and I'm not sure if there is a way or another application to run a music track with a click only for monitoring of the drummer (which GB does) and at the same time run the video which was edited to by synchronized with the audio the musicians will play.
    I can see the the movie preview window and make it larger, the problem is that it will not pay in full screen  move on a video beam.
    I'm starting to feel that with GB it is not possible.

  • When I turn my ipod on why does the screen stay blank and then turn itself off?

    When I turn my ipod on the normal start up screen appears with the apple logo in the middle, but then after a few seconds the screen goes blank and it turns itself off. It was working fine the other day. I even charged it overnight to make sure that it wasnt because it was out of battery. I dont know what to do, it has over 600 songs on it and around 300 photos, I know that the memory isnt full because I checked the other day and it said I had around 1GB left. I cant do anything on at all because the screen just goes blank and then turns itself off. Please help, thank you

    Well, I strongly suspect that a gig isn't quite enough "extra" storage to allow operation.
    However, first, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • Mini-DVI to DVI - 1920x1080 full-screen video

    Just bought a mini-DVI to DVI adapter to hook up my Mid-2006 MacBook to my Acer H223H 23" LCD screen. It works fabulously as expected, except when I try to watch full-screen video on the Acer LCD at 1920x1080. What's strange is that when I'm watching video in a window (using VLC), I can increase the size of the window until it almost takes up the whole screen, but then any further than that causes noticeable jerkiness (a lot of dropped frames) in the video playback. Any ideas what's going on here?
    I hope this is the right forum for this and thanks in advance for helping me out!

    Posted too soon before fully exploring the situation. A little more context: I'm running a fresh install of Snow Leopard.
    I used the mini-DVI to DVI adapter and my LCD to hook up my girlfriend's laptop (MacBook running Leopard). Full screen video in VLC plays no problem (even used the same file). Also, I tried playing a DVD on my MacBook and it ran flawlessly. Clearly the issue is VLC's compatibility with Snow Leopard.
    Thanks anyway - glad to know this community is here if I have any other issues.

  • TS3274 My IPAD is on and is making the right noises as I am receiving emails.  The screen is blank and I can not get it to turn on.  I have tried to turn off and on again which is tricky when there is a blank screen.  I have synced my ipad with itunes... 

    My IPAD has a blank screen.  It is on and working because I can hear the ping of my emails arriving.  I turned off and on as best I could which is tricky as the screen is blank.  I synced with itunes and checked for updates.  All ok. 
    Screen is still blank.
    I can reset the ipad but I did this a month or so ago and it took forever and it lost all of my music which then took forever to get back on properly.
    SO If I can avoid this I would.
    Any help would be so appreciated!!
    Thankyou

    Try reset iPad (not Restore)
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • MacBook Pro Retina 13" fan very loud/overheats when playing full screen video/games

    Hi,
    Just purchased a MacBook Pro Retina, refurbished (because why not - the same product for a cheaper price) around a month ago. It's the 13 inch and is the model before the most recent one came out (4GB of RAM instead of 8GB - late 2013). From the very first day, playing a full-screen video on any site (be it YouTube, Facebook, etc) just makes the fan much louder than usual (so loud that you can almost hear it more over the video itself). Thought it may have been just a thing with Flash Player being buggy, but the problem has persisted for a while now. I'm not even pushing the CPU to any limits - literally playing a full-screen video on Facebook (not even in HD) makes the fan go crazy.
    Just last night I tried installing Borderlands 2 and it was the same thing - FPS rate was fine, no lag, just the fan was so loud that I actually got scared for my computer and turned it off. After closing the app and checking out the fan temperature, it was at 91c.
    Never happens when browsing/surfing or doing my usual work.
    Should I go give it back to Apple? The thing is I start university in less than a week (and hence will be traveling), so not sure if I can afford to give my laptop in to them for a long period of time (I know it should be free though since mine is a refurb item). May it just be an issue that is quickly repairable or is this worse?

      During processor intensive activities—such as processing HD video or playing a game that makes extensive use of the graphics processor—the    fans speed up to provide additional airflow.
      http://support.apple.com/kb/ht4543
    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
    If this does not help, contact Apple.
    Genius Bar reservation:
    http://www.apple.com/retail/geniusbar/
    Best.

  • Full Screen Videos in iTunes Don't Work in Leopard

    Hi,
    I've upgraded my MacBook Pro from Tiger to Leopard and I do have a registered Quicktime Pro 7 license. The QuickTime tab shows me that it's a Pro version. However, if I am trying to play full screen videos in iTunes I just see the mini video in the screen center. Any idea how I can fix this?

    I have recently relocated to Australia & have since updated my itunes account with an Australain address.
    The issue is your credit or debit card. They must be associated with the same country in which you reside.
    "Although you can browse the iTunes Store in any country without being signed in, you can only purchase content from the iTunes Store for your own country. This is enforced via the billing address associated with your credit card or other payment method that you use with the iTunes Store. You can use the iTunes Store in all countries of which you’re a resident, but you’ll either need a separate iTunes Store account for each one, or you’ll need to continually be switching your billing information on your single account. Generally, it’s simpler just to set up an alternative account for these situations."
    From here >  The Complete Guide to Using the iTunes Store | iLounge Article

  • Slow graphics performance - login screen, launchpad, full screen video all stutter

    Since installing Mavericks, I've found that several system animations are slow/stutter. This is on a 2012 MacBook Air with maxed out hardware specs so its not b/c I'm running an old system.
    Some examples:
    - When booting up, right before I reach the login screen, the display quickly flashes blue. This leads me to believe something funky is going on with my graphics card/drivers
    - The login animation, where you click your username and it floats to the middle of the screen so you can type in your password, is very jerky, taking 2+ seconds to complete. Previously it had been fast and smooth
    - When using Launchpad, expanding folders often takes several seconds. The folder will start to expand, freeze, and then finally finish. This tends to be more of a problem for folders with 1 row of icons. Large folders oddly seem to expand ok / smoothly
    - Watching full screen video in iTunes causes the audio to stutter (the video playback is still smooth). If I make the window smaller, audio and video playback are smooth again
    Is anyone else experiencing these kinds of graphics issues? Any idea whats going on or how to fix?

    Quit Chrome and see whether there's any change. If not, see below.
    Step 1
    When you notice the problem, launch the Activity Monitor application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
    Select the CPU tab of the Activity Monitor window.
    Select All Processes from the View menu or the menu in the toolbar, if not already selected.
    Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for User, System, andIdle at the bottom of the window.
    Select the Memory tab. What value is shown in the bottom part of the window for Swap used?
    Next, select the Disk tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
    Step 2
    If you have more than one user account, you must be logged in as an administrator to carry out this step.
    Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Select the 50 or so most recent entries in the log. Copy them to the Clipboard by pressing the key combinationcommand-C. Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

Maybe you are looking for

  • ITunes 11.0.2.26 Freezes when playing songs

    Using Win 7 64 bit SP1. What I have noticed is, that if left on its own, iTunes 11.0.2.26 seems fine, but once other programs are opened and used... in my case memory/processor intense things like Powerpoint and doing Internet Searches ESPECIALLY for

  • Gps on 8520

    can i get gps on my curve 8520?

  • Buglist

    Hello, I am working on VPD and I founded everything is related to Buglist Application in the book "_Pro oracle application express_". I went apress to get source code but I founded infinite loop. How can get out from the loop or exception?Thanks, New

  • Menu bar shows twice on dual monitor, dock moves around

    Mac Pro (early 2008) w/ Yosemite and dual monitor display The menu bar at the top of the screen appears on BOTH monitors ALL the time. However, the one on the secondary monitor is dimmed out, and can be two or three app switches behind. For example,

  • Expressway E Port 443 access from Internet

    According to Cisco documentation, 443 is one of the ports that should be opened from Internet towards the Expressway-E IP. If we do that, the web-administration becomes accessible from the internet. Is there a way to disable web-administration access