Function Module READ_TEXT short dump
Hi All,
I've created a bespoke long text object so I can save some long text to it. I created it by copying the SAP standard long text object for CATS (timesheets) in SE75. I save to this object using the function module SAVE_TEXT and I read it back using the function module READ_TEXT. I get a short dump during READ_TEXT which says:
"CONNE_IMPORT_WRONG_COMP_TYPE
Error when attempting to IMPORT object "TLINE".
When importing the object "TLINE", the component no. 1 in the dataset has a different type from the corresponding component of the target object in the program "SAPLSTXD ".
The data type is "I" in the dataset, but "C" in the program."
I've looked on OSS (as it's a SAP standard program) but can't find anything. I get no errors when trying to read the standard object CATS only when I try and read my new object, so I'm thinking that I haven't set it up correctly. An entry in table STXH occurs for both objects so I know I have saved some long text in my object.
Can anyone help?
Gill
Hi,
have you passed the correct parameters to the FM.
try to check the sample...
data: it_lines like tline occurs 0 with header line.
CALL FUNCTION 'READ_TEXT'
EXPORTING
CLIENT = SY-MANDT
ID = 'Z056'
LANGUAGE = 'E'
NAME = L_NAME
OBJECT = 'VBBP'
TABLES
LINES = IT_LINES
EXCEPTIONS
ID = 1
LANGUAGE = 2
NAME = 3
NOT_FOUND = 4
OBJECT = 5
REFERENCE_CHECK = 6
WRONG_ACCESS_TO_ARCHIVE = 7
OTHERS = 8
i think it is because of it_lines declaration.
Regards
vijay
Similar Messages
-
Calling syntactically incorrect remote function module triggers short dump
Hi,
I have some Z Function modules in ABC system and i need to call them remotely from XYZ.
There are some syntax errors in the FM's of ABC system so in the call of XYZ I am getting dump.
Can I know how to capture if there is any syntax error in the remote FM of ABC system from XYZ.
I have got FUNCTION_EXISTS to check the existence.
Can I have like that some other function to check the syntax?
Thanks,
Sham Sundher.Hi,
Check if this link can be of any help.
[FM for Syntax Check of function modules]
Regards,
Vik -
Function module ISR_GET_DATA_FROM_XML throwing dump.
Hi All,
Function module ISR_GET_DATA_FROM_XML throwing dump.
The dump says,
The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
caught in
procedure "ISR_GET_DATA_FROM_XML" "(FUNCTION)", nor was it propagated by a
RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
You attempted to use a 'NULL' object reference (points to 'nothing')
access a component.
An object reference must point to an object (an instance of a class)
before it can be used to access components.
Either the reference was never set or it was set to 'NULL' using the
CLEAR statement.
Can you please help me in resolving this error.
PERFORM set_tag_constants.
set size of XML document
ld_size = id_size.
create the input stream
lr_stream = ir_ixml_stream_factory->create_istrea
table = it_xml
size = ld_size ). create XML document object
lr_dom = ir_ixml_factory->create_document( ).
create parser
lr_parser = ir_ixml_factory->create_parser(
stream_factory = ir_ixml_stream_factory
istream = lr_stream
document = lr_dom ).
Thanks
Rohini.Hi,
SELECT MBLNR
MJAHR
FROM MSEG
INTO TABLE I_MKPF
WHERE MBLNR IN S_MBLNR AND
MJAHR IN S_MJAHR.
IF I_MKPF IS NOT INITIAL.
SELECT * FROM MSEG INTO TABLE O_MSEG FOR ALL ENTRIES IN I_MKPF
WHERE MBLNR = I_MKPF-MBLNR
AND MJAHR = I_MKPF-MJAHR
AND MATNR IN I_MATNR
AND WERKS IN I_WERKS
AND LGORT IN I_LGORT.
ENDIF.
ALSO CHECK FM u2018/BEV2/ED_REA_MSEG_MKPFu2019.
Regards,
Deepa Kulkarni -
How to Use Function Module READ_TEXT
Hi
Anyone give me code or link or example for how to use function module READ_TEXT
and what are the parameters which we have to pass in module.
Regards.
MohsinHi,
refer the given below code.
CALL FUNCTION 'READ_TEXT'
EXPORTING
CLIENT = SY-MANDT
id = 'KOPF'uF0E0 these details we will get thru transaction , where we enter these details.
language = 'EN'uF0E0 these details we will get thru transaction , where we enter these details.
name = TNAME "table name
object = 'AUFK' " these details we will get thru transaction , where we enter these details.
* ARCHIVE_HANDLE = 0
* LOCAL_CAT = ' '
IMPORTING
HEADER = HTEXT
tables
lines = LTEXT
* EXCEPTIONS
* ID = 1
* LANGUAGE = 2
* NAME = 3
* NOT_FOUND = 4
* OBJECT = 5
* REFERENCE_CHECK = 6
* WRONG_ACCESS_TO_ARCHIVE = 7
* OTHERS = 8
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Thanks
Arun -
How to extract item text in PR... using function module read_text...?
Dear all,
I want to extract the Item text in transaction ME53N.
for that I'm using function module READ_TEXT.
for the above function module we have to provide 7 inputs...
I want to know
Name = ?
object = ?
Archive_handle = ?
Local_cat = ?
were can we get above variables....?
Regards
Nagaraju.BHi,
Try This code
CALL FUNCTION 'READ_TEXT'
EXPORTING
client = sy-mandt
id = 'B01'
language = sy-langu
name = w_zht_tdname " PR Number
object = 'EBANH'
TABLES
lines = t_zht_lines
EXCEPTIONS
id = 1
language = 2
name = 3
not_found = 4
object = 5
reference_check = 6
wrong_access_to_archive = 7
OTHERS = 8.
Regards
Krishna -
Function module going for DUMP
Hi ALL,
I have import request and i got sucess .My 3 function modules are import to client system.2 FM are working properly but 1 function module is going for DUMP.
When iam Executing this FM through SE37 F8 its running but iam not able to display or change this ZFM.
In our DEV sytem it is working properly.but Client system it is going for DUMP.
I have gone dump analysis its saying
An exception occurred. This exception is dealt with in more detail below
. *The exception, which is assigned to the class 'CX_SY_IMPORT_MISMATCH_ERROR',
was neither caught nor passed along using a RAISING clause, in the procedure
MO_IMPORT_MODIFICATIONS" "(METHOD
Length error occurred during the IMPORT statement
*The system found when importing that the target object was longer or
shorter than the object to be imported*
Thanks in Advance,
Madhu.
Edited by: madhubabu rao on Apr 23, 2009 10:34 AM
Edited by: madhubabu rao on Apr 23, 2009 10:36 AMHi sekhar,
I did not transport individually.I have transport 3 FM in a function group and it is assigned to a Package.
First i have 2 FM in my function group after that i have copied one more FM from another Function group.
in SE80 right click -->copy it asked me function group name only .not transport number.
After copy the FM i have transport total package.2 FM are working properly .The FM which i have copied it is not able to display or edit.
Madhu -
JCO RFC provider: Server function not found, short dump
Hi all,
I'm trying to use the JCO RFC provider service of NW04s (SP15) together with an ABAP 4.6C system. I've followed all the documentation that I could find, but couldn't get it to work yet. This is what I've done so far:
Using SM59 I've had a destination APP_JK1 created for me on the R/3 system. AFAIK it's set up correctly and marked as a "registered server", connection tests were successful.
On the portal, I've created a RFC portal destination using my R/3 credentials and successfully tested it. Then I created an entry in the RFC provider service, using the correct values for system, id & gateway, and let it point to my RFC destination for the repository connection. The program ID is also APP_JK1.
Next, I created a stateless session bean which is part of an EAR, gave it a JNDI name of "RFCTEST" and added a method like this:
* @ejb.interface-method view-type="both"
* @param function called function
public void processFunction(com.sap.mw.jco.JCO.Function function) {
JCO.ParameterList input = function.getImportParameterList();
String query = input.getString("I_STRING_SEARCH");
JCO.ParameterList output = function.getExportParameterList();
output.setValue(query, "ECHOTEXT");
(The project uses xdoclet for the creation of J2EE stuff)
In application-j2ee-engine.xml located in the META-INF directory of my EAR, I've added:
<reference reference-type="hard">
<reference-target provider-name="sap.com" target-type="library">com.sap.mw.jco</reference-target>
</reference>
The application deploys without errors, and besides from my RFC connection works as expected. In the JNDI registry view of VisualAdmin I see the corresponding entry: "rfcaccessejb/RFCTEST" is a local reference to my stateless session bean.
On ABAP, I have a tiny little program that calls my function, mainly looking like this:
CALL FUNCTION 'RFCTEST' DESTINATION 'APP_JK1'
EXPORTING
I_STRING_SEARCH = query
IMPORTING
ECHOTEXT = t1.
Unfortunately, it short dumps immediately. The error message is:
JCO.Server could not find server function 'RFCTEST'
I'm lost. What could be wrong? Any help is greatly appreciated. Kind regards,
Christian AustHello Perry song,
You got the short dump bcoz, there is no perform by the name you provided in the program,
for example. consider there are 2 programs.
Program 1 :
REPORT ZPGM1.
*Calling a perform SNAME1 , the code of perform is written in ZPGM2.
perform sname1 IN PROGRAM ZPGM2.
Program 2 :
REPORT ZPGM2.
perform sname1 .
Form SNAME1 .
write : 'Text in form SNAME1' .
endform. " SNAME1
(here SNAME1 is found and it works perfectly )
Change in Program 1 :
REPORT ZPGM1.
*Calling perform DELTA ,
perform DELTA IN PROGRAM ZPGM2 IF FOUND.
Now the perform statement will search for perform " DELTA " in ZPGM2 , but there is no perform by name DELTA , so here we need to mention the condition " IF FOUND " , so now by mentioning the condition " IF FOUND " in perform statement , if the perform DELTA is not found then it wont go to DUMP.
If condition " IF FOUND " is not mentioned in perform statement like
perform DELTA IN PROGRAM ZPGM2 . ( This gives DUMP )
just type " IF FOUND " when u r calling a perform from other program ( i guess this will solve the problem ).
Hope it might be helpfull,
Regards ,
Aby
Edited by: abhi on Nov 6, 2008 10:14 AM -
Problem when using function module PYXX_READ_PAYROLL_RESULT giving dump.
When i am using PYXX_READ_PAYROLL_RESULT function module to get HR cluster data. I am getting following dump.
So,can any one help me to solve this issue.I want this function data.
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_TYPE', was
not caught in
procedure "PYXX_READ_PAYROLL_RESULT" "(FUNCTION)", nor was it propagated by a
RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
Call to FORM "IMPORT_RESULT" is incorrect:
The actual parameter no. 2 has a different data type in the
PERFORM than requested for the FORM "IMPORT_RESULT" in program "%_T0LJ20".
Program SAPLHRPAY99_IMPEXP
Include LHRPAY99_IMPEXPU02
Row 1
Module type (FUNCTION)
Module Name PYXX_READ_PAYROLL_RESULT
Program SAPLHRPAY99_IMPEXP
Include LHRPAY99_IMPEXPU02
Row 137
Module type (FUNCTION)
Module Name PYXX_READ_PAYROLL_RESULTFind below is my code can u tell me wch type is not true .i tried but not able to find prob solution.
Plz help me waiting for reply.
TYPE-POOLS: SLIS.
DATA : FIELDCATALOG TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE,
it_sort TYPE slis_t_sortinfo_alv WITH HEADER LINE,
gd_tab_group TYPE slis_t_sp_group_alv,
gd_layout TYPE slis_layout_alv,
gd_repid LIKE sy-repid,
gt_events TYPE slis_t_event,
gd_prntparams TYPE slis_print_alv,
it_eve TYPE slis_t_event,
V_LAYOUT TYPE SLIS_LAYOUT_ALV.
wa_eve TYPE slis_alv_event.
*DATA header TYPE slis_t_listheader WITH HEADER LINE.
*DATA: ls_fcat TYPE slis_t_fieldcat_alv,
l_lin TYPE i.
*DATA: ls_event TYPE slis_alv_event.
DATA : WA_COLNO(2) TYPE N VALUE '1'.
DATA : REPID LIKE SY-REPID.
TABLES: PA0001,PA0002,T001P,T528T,T527X,T503T.
DATA:BEGIN OF IT_PA0002 OCCURS 0,
PERNR LIKE PA0002-PERNR,
END OF IT_PA0002.
DATA:BEGIN OF IT_PA0001 OCCURS 0,
PERNR LIKE PA0001-PERNR,
ENAME LIKE PA0001-ENAME,
PLANS LIKE PA0001-PLANS,
WERKS LIKE PA0001-WERKS,
BTRTL LIKE PA0001-BTRTL,
ORGEH LIKE PA0001-ORGEH,
PERSK LIKE PA0001-PERSK,
END OF IT_PA0001.
DATA: BEGIN OF IT_T528T OCCURS 0,
PLANS LIKE T528T-PLANS,
PLSTX LIKE T528T-PLSTX,
END OF IT_T528T.
DATA: BEGIN OF IT_T001P OCCURS 0,
WERKS LIKE T001P-WERKS,
BTRTL LIKE T001P-BTRTL,
BTEXT LIKE T001P-BTEXT,
END OF IT_T001P.
DATA: BEGIN OF IT_T527X OCCURS 0,
ORGEH LIKE T527X-ORGEH,
ORGTX LIKE T527X-ORGTX,
END OF IT_T527X.
DATA: BEGIN OF IT_T503T OCCURS 0,
PERSK LIKE T503T-PERSK,
PTEXT LIKE T503T-PTEXT,
END OF IT_T503T.
DATA:BEGIN OF IT_FINAL OCCURS 0,
PERNR LIKE PA0001-PERNR,
ENAME LIKE PA0001-ENAME,
PLSTX LIKE T528T-PLSTX,
BTEXT LIKE T001P-BTEXT,
ORGTX LIKE T527X-ORGTX,
PTEXT LIKE T503T-PTEXT,
END OF IT_FINAL.
*DATA: WI_RT LIKE LINE OF PAYROLL-INTER-RT,
*DATA: WI_RGDIR LIKE STANDARD TABLE OF PC261 WITH HEADER LINE,
DATA: IT_EVP TYPE HRPY_TT_RGDIR,
ls_evp LIKE LINE OF IT_EVP,
WI_RGDIR LIKE STANDARD TABLE OF PC261 WITH HEADER LINE,
WI_PAYRESULT TYPE PAY99_RESULT.
WI_PAYRESULT TYPE STANDARD TABLE OF PAYUS_RESULT WITH HEADER LINE.
DATA WG_MOLGA LIKE T500L-MOLGA.
SELECTION-SCREEN BEGIN OF BLOCK B1.
SELECT-OPTIONS: S_PERNR FOR PA0001-PERNR,
S_BTRTL FOR PA0001-BTRTL,
S_ORGEH FOR PA0001-ORGEH.
SELECTION-SCREEN END OF BLOCK B1.
START-OF-SELECTION.
PERFORM GET_DATA.
PERFORM BUILD_FIELD_CATLOG.
PERFORM DISPLAY_DATA.
*& Form GET_DATA
text
--> p1 text
<-- p2 text
FORM GET_DATA .
SELECT PERNR
INTO CORRESPONDING FIELDS OF TABLE IT_PA0002
FROM PA0002
WHERE PERNR IN S_PERNR.
IF IT_PA0002[] IS NOT INITIAL.
SELECT PERNR ENAME PLANS WERKS BTRTL ORGEH PERSK
INTO CORRESPONDING FIELDS OF TABLE IT_PA0001
FROM PA0001
FOR ALL ENTRIES IN IT_PA0002
WHERE PERNR = IT_PA0002-PERNR
AND BTRTL IN S_BTRTL
AND ORGEH IN S_ORGEH.
ENDIF.
IF IT_PA0001[] IS NOT INITIAL.
SELECT PLANS PLSTX
INTO CORRESPONDING FIELDS OF TABLE IT_T528T
FROM T528T
FOR ALL ENTRIES IN IT_PA0001
WHERE PLANS = IT_PA0001-PLANS
AND SPRSL = 'EN'.
SELECT WERKS BTRTL BTEXT
INTO CORRESPONDING FIELDS OF TABLE IT_T001P
FROM T001P
FOR ALL ENTRIES IN IT_PA0001
WHERE WERKS = IT_PA0001-WERKS
AND BTRTL = IT_PA0001-BTRTL.
SELECT ORGEH ORGTX
INTO CORRESPONDING FIELDS OF TABLE IT_T527X
FROM T527X
FOR ALL ENTRIES IN IT_PA0001
WHERE ORGEH = IT_PA0001-ORGEH
AND SPRSL = 'EN'.
SELECT PERSK PTEXT
INTO CORRESPONDING FIELDS OF TABLE IT_T503T
FROM T503T
FOR ALL ENTRIES IN IT_PA0001
WHERE PERSK = IT_PA0001-PERSK
AND SPRSL = 'EN'.
ENDIF.
*DELETE ADJACENT DUPLICATES FROM IT_PA0001 COMPARING PERNR.
LOOP AT IT_PA0001.
MOVE IT_PA0001-ENAME TO IT_FINAL-ENAME.
READ TABLE IT_PA0002 WITH KEY PERNR = IT_PA0001-PERNR.
IF SY-SUBRC = 0.
MOVE IT_PA0002-PERNR TO IT_FINAL-PERNR.
ENDIF.
READ TABLE IT_T528T WITH KEY PLANS = IT_PA0001-PLANS.
IF SY-SUBRC = 0.
MOVE IT_T528T-PLSTX TO IT_FINAL-PLSTX.
ENDIF.
LOOP AT IT_T001P WHERE WERKS = IT_PA0001-WERKS AND BTRTL = IT_PA0001-BTRTL.
MOVE IT_T001P-BTEXT TO IT_FINAL-BTEXT.
ENDLOOP.
READ TABLE IT_T527X WITH KEY ORGEH = IT_PA0001-ORGEH.
IF SY-SUBRC = '0'.
MOVE IT_T527X-ORGTX TO IT_FINAL-ORGTX.
ENDIF.
READ TABLE IT_T503T WITH KEY PERSK = IT_PA0001-PERSK.
IF SY-SUBRC = '0'.
MOVE IT_T503T-PTEXT TO IT_FINAL-PTEXT.
ENDIF.
CALL FUNCTION 'CU_READ_RGDIR'
EXPORTING
PERSNR = IT_FINAL-PERNR
BUFFER
NO_AUTHORITY_CHECK = ' '
IMPORTING
MOLGA = WG_MOLGA
TABLES
IN_RGDIR = WI_RGDIR
EXCEPTIONS
NO_RECORD_FOUND = 1
OTHERS = 2 .
CLEAR WG_SUM.
LOOP AT WI_RGDIR INTO ls_evp.
IF ( WI_RGDIR-FPEND BETWEEN P_STDATE AND P_ENDATE AND
WI_RGDIR-SRTZA = 'A' ) .
IF Wg_MOLGA = '10'.
CALL FUNCTION 'PYXX_READ_PAYROLL_RESULT'
EXPORTING
CLUSTERID = 'IN'
EMPLOYEENUMBER = IT_FINAL-PERNR
SEQUENCENUMBER = ls_evp-SEQNR
READ_ONLY_INTERNATIONAL = ''
CHANGING
PAYROLL_RESULT = WI_PAYRESULT
EXCEPTIONS
ILLEGAL_ISOCODE_OR_CLUSTERID = 1
ERROR_GENERATING_IMPORT = 2
IMPORT_MISMATCH_ERROR = 3
SUBPOOL_DIR_FULL = 4
NO_READ_AUTHORITY = 5
NO_RECORD_FOUND = 6
VERSIONS_DO_NOT_MATCH = 7
ERROR_READING_ARCHIVE = 8
ERROR_READING_RELID = 9
OTHERS = 10.
endif.
ENDLOOP.
APPEND IT_FINAL.
ENDLOOP.
DELETE ADJACENT DUPLICATES FROM IT_FINAL COMPARING ALL FIELDS.
ENDFORM. " GET_DATA
*& Form BUILD_FIELD_CATLOG
text
--> p1 text
<-- p2 text
FORM BUILD_FIELD_CATLOG .
CLEAR FIELDCATALOG.
FIELDCATALOG-FIELDNAME = 'PERNR'.
FIELDCATALOG-SELTEXT_M = 'Emp Code'.
FIELDCATALOG-COL_POS = WA_COLNO.
FIELDCATALOG-OUTPUTLEN = 9.
FIELDCATALOG-EMPHASIZE = 'X'.
FIELDCATALOG-KEY = 'X'.
WA_COLNO = WA_COLNO + 1.
APPEND FIELDCATALOG TO FIELDCATALOG.
CLEAR FIELDCATALOG.
FIELDCATALOG-FIELDNAME = 'ENAME'.
FIELDCATALOG-SELTEXT_M = 'Emp Name'.
FIELDCATALOG-COL_POS = WA_COLNO.
FIELDCATALOG-OUTPUTLEN = 40.
FIELDCATALOG-EMPHASIZE = 'X'.
FIELDCATALOG-KEY = 'X'.
WA_COLNO = WA_COLNO + 1.
APPEND FIELDCATALOG TO FIELDCATALOG.
CLEAR FIELDCATALOG.
FIELDCATALOG-FIELDNAME = 'PLSTX'.
FIELDCATALOG-SELTEXT_M = 'Position'.
FIELDCATALOG-COL_POS = WA_COLNO.
FIELDCATALOG-OUTPUTLEN = 26.
FIELDCATALOG-EMPHASIZE = 'X'.
FIELDCATALOG-KEY = 'X'.
WA_COLNO = WA_COLNO + 1.
APPEND FIELDCATALOG TO FIELDCATALOG.
CLEAR FIELDCATALOG.
FIELDCATALOG-FIELDNAME = 'BTEXT'.
FIELDCATALOG-SELTEXT_M = 'Work Location'.
FIELDCATALOG-COL_POS = WA_COLNO.
FIELDCATALOG-OUTPUTLEN = 15.
FIELDCATALOG-EMPHASIZE = 'X'.
FIELDCATALOG-KEY = 'X'.
WA_COLNO = WA_COLNO + 1.
APPEND FIELDCATALOG TO FIELDCATALOG.
CLEAR FIELDCATALOG.
FIELDCATALOG-FIELDNAME = 'ORGTX'.
FIELDCATALOG-SELTEXT_M = 'Dept. Description'.
FIELDCATALOG-COL_POS = WA_COLNO.
FIELDCATALOG-OUTPUTLEN = 25.
FIELDCATALOG-EMPHASIZE = 'X'.
FIELDCATALOG-KEY = 'X'.
WA_COLNO = WA_COLNO + 1.
APPEND FIELDCATALOG TO FIELDCATALOG.
CLEAR FIELDCATALOG.
FIELDCATALOG-FIELDNAME = 'PTEXT'.
FIELDCATALOG-SELTEXT_M = 'Grade Set Code'.
FIELDCATALOG-COL_POS = WA_COLNO.
FIELDCATALOG-OUTPUTLEN = 21.
FIELDCATALOG-EMPHASIZE = 'X'.
FIELDCATALOG-KEY = 'X'.
WA_COLNO = WA_COLNO + 1.
APPEND FIELDCATALOG TO FIELDCATALOG.
ENDFORM. " BUILD_FIELD_CATLOG
*& Form DISPLAY_DATA
text
--> p1 text
<-- p2 text
FORM DISPLAY_DATA .
REPID = SY-CPROG.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = REPID
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
I_CALLBACK_TOP_OF_PAGE = 'TOP-OF-PAGE'
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = 'ALV_BACKGROUND'
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT = 'X'
IT_FIELDCAT = FIELDCATALOG[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = 'A'
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
I_HTML_HEIGHT_TOP = 0
I_HTML_HEIGHT_END = 0
IT_ALV_GRAPHICS =
IT_HYPERLINK =
IT_ADD_FIELDCAT =
IT_EXCEPT_QINFO =
IR_SALV_FULLSCREEN_ADAPTER =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = IT_FINAL
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " DISPLAY_DATA -
Showing error in read_text function module
- Forcast ID Number: Read function module READ_TEXT where ID = Z001, Object = VBBK to get the Forcast ID. Display it on the output.
CALL FUNCTION 'READ_TEXT'
EXPORTING
CLIENT = SY-MANDT
ID = 'Z001'
LANGUAGE =
NAME =
OBJECT = 'VBBK'
ARCHIVE_HANDLE = 0
LOCAL_CAT = ' '
IMPORTING
HEADER =
TABLES
LINES =
EXCEPTIONS
ID = 1
LANGUAGE = 2
NAME = 3
NOT_FOUND = 4
OBJECT = 5
REFERENCE_CHECK = 6
WRONG_ACCESS_TO_ARCHIVE = 7
OTHERS = 8
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
its showing error---unable to interprete OBJECT.possible cases of spelling or comma errorLook at the Bold ones ... U need to give values for
language and name
CALL FUNCTION 'READ_TEXT'
EXPORTING
CLIENT = SY-MANDT
ID = 'Z001'
LANGUAGE = ' '
NAME = ' '
OBJECT = 'VBBK'
ARCHIVE_HANDLE = 0
LOCAL_CAT = ' '
IMPORTING
HEADER =
TABLES
LINES =
EXCEPTIONS
ID = 1
LANGUAGE = 2
NAME = 3
NOT_FOUND = 4
OBJECT = 5
REFERENCE_CHECK = 6
WRONG_ACCESS_TO_ARCHIVE = 7
OTHERS = 8
IF SY-SUBRC 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF. -
Copy Standard Function modules to Z Function modules
Hello,
I have a requirement like , I need have a typical requirement where i need to copy few function modules in the same function group , in this regard i copied 4 function module and calling performs with the program name , but i am unable to achive the requirement , Function module is getting Dump,
Can any one explain the standarded function modules and place it in Z function group. or is it possible to include standard function group in to Z function group ?
How to get reslove ? please guide ...
Thanks In Advance.
With Best Regards
Naganjaneyulu.P.VHi Naganjaneyulu,
If you copy it will be similar to Standard. But you can modify those FMs as you like which will not be possible in standard. Also if you solely copy the FM, If that FM consists or depends on the screens or Includes which are present in the Function Group then there will be syntax errors and shortdumps. The Reason for your short dump might be this.
If you are still not happy with this approach, Kindly paste the standard FM that you are trying to clone and the short dump that you are encountering.
Thanks,
Sai -
Urgent: Problems in Generic Extraction by Function Module
Hi BW Gurus,
I am new to SDN and also new to generic extraction using function module. My requirement is to extract long text(142 char) from CRM to BW as the text is not stored in database table I used function module read_text with in another ZXXX function module copy of (RSAX_BIW_GET_DATA_SIMPLE). In my extract structure I used GUID(char,32), Langu, long text(142 char) and 2 placeholders. Text can be extracted by passing STXH table fields(Tdname, Tdid, Tdobject, Tdspars) to read_text as parameters and i also need to use CRMD_ORDERADM_H field GUID(32 char) to compare 1st 32 chars of tdname(70 char) with Guid to select Guids and loop thru this Guids and for each Guid i need to append lines of text to e_t_data but as i donot know ABAP i unable to write the code for this. Through my friends help i wrote code when i check in RSA3 it is displaying the text but when i replicate into BW and load into data target in monitor the status is red with records initially but afterwards it will be red status again with 0 from 0 records for initial load again.when i check on job logs the errors i have are:
The background job has created a job log file of 2Gb size and it is currently on a infinite loop writing entries into the SAP System Log that it cannot write to the Job log file due to Error 22 for write/read access to a file this is because of the datasource i have created. Please find my Function module and if anyone would please correct FM and send me that will be really great.I appreciate it in advance.
MY Function Module is:
FUNCTION Z_CRMORDERH_STR_TXT.
""Local Interface:
*" IMPORTING
*" VALUE(I_REQUNR) TYPE SRSC_S_IF_SIMPLE-REQUNR
*" VALUE(I_DSOURCE) TYPE SRSC_S_IF_SIMPLE-DSOURCE OPTIONAL
*" VALUE(I_MAXSIZE) TYPE SRSC_S_IF_SIMPLE-MAXSIZE OPTIONAL
*" VALUE(I_INITFLAG) TYPE SRSC_S_IF_SIMPLE-INITFLAG OPTIONAL
*" VALUE(I_READ_ONLY) TYPE SRSC_S_IF_SIMPLE-READONLY OPTIONAL
*" VALUE(I_REMOTE_CALL) TYPE SBIWA_FLAG DEFAULT SBIWA_C_FLAG_OFF
*" TABLES
*" I_T_SELECT TYPE SRSC_S_IF_SIMPLE-T_SELECT OPTIONAL
*" I_T_FIELDS TYPE SRSC_S_IF_SIMPLE-T_FIELDS OPTIONAL
*" E_T_DATA STRUCTURE YCRM_TEXT_STR OPTIONAL
*" EXCEPTIONS
*" NO_MORE_DATA
*" ERROR_PASSED_TO_MESS_HANDLER
***" EXCEPTIONS NO_MORE_DATA
*" ERROR_PASSED_TO_MESS_HANDLER
Tables: CRMD_ORDERADM_H, STXH.
Auxiliary Selection criteria structure
data: l_s_select type srsc_s_select.
Maximum number of lines for DB table
Statics: s_s_if type srsc_s_if_simple,
counter
s_counter_datapakid like sy-tabix,
Cursor
s_cursor type cursor.
data: i_crmtext type standard table of TLINE .
types: begin of xsreph ,
GUID type CRMD_ORDERADM_H-guid,
end of xsreph.
data: i_guid type standard table of xsreph.
data: I_TEXT type STXH-TDNAME.
data: xempl like YCRM_TEXT_STR occurs 0 with header line.
data: t_tab like dd03l-tabname.
Select ranges
ranges: l_r_guid for CRMD_ORDERADM_H-guid.
l_r_connid for sflight-connid.
Initialization mode (first call by SAPI) or data transfer mode
(following calls) ?
if i_initflag = sbiwa_c_flag_on.
Initialization: check input parameters
buffer input parameters
prepare data selection
Check DataSource validity
case i_dsource.
when 'yCRM_TEXT'. " for S_SREPH1
when others.
if 1 = 2. message e009(r3). endif.
this is a typical log call. Please write every error message like this
log_write 'E' "message type
'R3' "message class
'009' "message number
i_dsource "message variable 1
' '. "message variable 2
raise error_passed_to_mess_handler.
endcase.
append lines of i_t_select to s_s_if-t_select.
Fill parameter buffer for data extraction calls
s_s_if-requnr = i_requnr.
s_s_if-dsource = i_dsource.
s_s_if-maxsize = i_maxsize.
Fill field list table for an optimized select statement
(in case that there is no 1:1 relation between InfoSource fields
and database table fields this may be far from beeing trivial)
append lines of i_t_fields to s_s_if-t_fields.
we will do our selection based on what is in the p table for the
infoobject
else. "Initialization mode or data extraction ?
Data transfer: First Call OPEN CURSOR + FETCH
Following Calls FETCH only
First data package -> OPEN CURSOR
if s_counter_datapakid = 0.
Fill range tables BW will only pass down simple selection criteria
of the type SIGN = 'I' and OPTION = 'EQ' or OPTION = 'BT'.
LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'GUID'.
MOVE-CORRESPONDING L_S_SELECT TO L_R_GUID.
APPEND L_R_GUID.
ENDLOOP.
case i_dsource.
when 'YCRM_TEXT'. " for S_SREPH1
t_tab = 'CRMD_ORDERADM_H'.
endcase.
select GUID
from (t_tab)
into table i_guid where PROCESS_TYPE = 'ZACI' and ( OBJECT_ID < '0000000042').
select tdname from stxh into i_text where tdobject = 'TEXT'.
if sy-subrc ne 0.
message e009(r3).
this is a typical log call. Please write every error message like this
log_write 'E' "message type
'R3' "message class
'009' "message number
i_dsource "message variable 1
'No master data found'. "message variable 2
raise error_passed_to_mess_handler.
endif.
Determine number of database records to be read per FETCH statement
from input parameter I_MAXSIZE. If there is a one to one relation
between DataSource table lines and database entries, this is trivial.
In other cases, it may be impossible and some estimated value has to
be determined.
open cursor with hold s_cursor for
select (s_s_if-t_fields) from CRMD_ORDERADM_H
where GUID in L_R_GUID .
ENDIF.
Fetch records into interface table.
named E_T_'Name of extract structure'.
fetch next cursor s_cursor
appending corresponding fields
of table e_t_data
package size s_s_if-maxsize.
IF SY-SUBRC <> 0.
CLOSE CURSOR S_CURSOR.
RAISE NO_MORE_DATA.
ENDIF.
as we are doing this only once can use the select statement.
***data: crmtext like tline occurs 0 with header line.
**data: i_crmtext type standard table of TLINE.
**data: i_guid type standard table of xsreph.
data: l_guid type THEAD-TDNAME.
data: st_guid type xsreph.
data: st_crmtext type TLINE.
data: lan type THEAD-TDSPRAS.
lan = 'E'.
loop at i_guid into st_guid.
l_guid = st_guid-guid.
CALL FUNCTION 'READ_TEXT'
EXPORTING
CLIENT = SY-MANDT
ID = 'A002'
LANGUAGE = lan
NAME = l_guid
OBJECT = 'CRM_ORDERH'
ARCHIVE_HANDLE = 0
LOCAL_CAT = ' '
IMPORTING
HEADER =
TABLES
LINES = i_crmtext.
EXCEPTIONS
ID = 1
LANGUAGE = 2
NAME = 3
NOT_FOUND = 4
OBJECT = 5
REFERENCE_CHECK = 6
WRONG_ACCESS_TO_ARCHIVE = 7
OTHERS = 8
e_t_data-guid = l_guid.
loop at i_crmtext into st_crmtext.
move lan to e_t_data-langu.
move st_crmtext-tdline to e_t_data-description.
append e_t_data.
endif.
endloop.
clear: st_guid,l_guid.
refresh: i_crmtext.
endloop.
S_COUNTER_DATAPAKID = S_COUNTER_DATAPAKID + 1.
endif.
ENDFUNCTION.
please Gurus as I donot know ABAP i appreciate if anyone would write a FM based on requirement and send me that will be really great this is my request. I gurantee of award points for good answers.
Regards
KishoreHi,
The statement <b>RAISE NO_MORE_DATA</b> should be active (uncommented) in your code. Otherwise, the infinte loop occurs.
See also, the Siggi's blog:
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
BTW, was it your thread here:
Re: Urgent: problems in extracting Long Text
Best regards,
Eugene -
what is the function moudle is used to get the long text in the report for purchase orders and sales orders
say clearlyHi raj,
Check the Function module READ_TEXT.
For PO:
you have to pass Text Id as: A01
Text Object as EKKO
TDNAME as the PO NUMBER
For SO
you have to pass Text Id as: 0001
Text Object as VBBK
TDNAME as the SO NUMBER
Regards,
ravi
Message was edited by:
Ravi Kanth Talagana -
Function Module for getting J1IEX Data
Dear All,
Is there any F.M available for getting details whatever is posted in J1IEX, like ED, Ecess, HEcess etc.
regards,
paras
Point Assured.Hi,
I'm not sure what you mean with 'textmodule' but try with function module READ_TEXT.
Regards,
Eduardo -
Looking for Function module through which I can get Logged comments
Hi,
I am new to CRM.
On an activity task we have 'Logged comments' section. I am looking for FM that I could use to import 'Logged comments' for an activity task.
I guess that I can use CRM_ORDER_READ. I was trying to find some documentation but did not find anything. I am not sure which object I should export.
Could anyone help me?
Many thanks,
JanIf you are refering to text called logged comments then use function module READ_TEXT.
Regard. -
CATS related function modules needed
Hi,
I have requirement like i need to upload time details into sap from non sap.CATS is the Tcode for time details.
CAT2 to enter time. I want to enter time details.
If any function modules avilable for this it will be easy for my work. Through BDC we can able to do this.
But if function modules avilable for the same it will be very much helpful to me.
Regards
SandeepFunction group Function group short text
Function Module Name Short text for function module
CAPP
CATS_APPROVAL
CATS_APPROVAL0
CATS_DATABASE_GET_OBJEC
CATS_DISPLAY_LIST
CATS_DISPLAY_TREE_LIST
CATB
CATS_DISPLAY_ALV_LIST
CATS_DISPLAY_DOCUMENT
CATS_DISPLAY_OBJECT
CATS_DISPLAY_TARGET_DOCUMENTS
CATS_DISPLAY_TARGET_DOCUMENTS0
CATS_DISPLAY_TRANSFER_LIST
CATE
CATS_INITIALIZE_MESSAGE
CATF
CATS_CHECK_APPLICATION_CO
CATS_FILL_INTERFACE_CO
CATL
CATS_CHECK_ARBPL_VALID
CATS_DET_ARBID_BY_ARBPL
CATS_DET_ARBPL_BY_ARBID
CATS_DET_AUFNR_BY_AUFPL
CATS_DET_AUFNR_BY_AUFPL_TRANS
CATS_DET_AUFPL_BY_AUFNR
CATS_GET_KAPAR_FOR_KAPID
CATS_GET_LOGISTIC_TEXT
CATS_GET_TABLE_AUFNR
CATS_GET_TABLE_RCR01
CATL2
CATS_AC03
CATS_CHECK_AND_DIST_ACTIVITIES
CATS_CHECK_APPLICATION_LOGIST
CATS_CHECK_STATUS_ACTIVITY
CATS_CJ13
CATS_CONVERT_EXT_TO_INT
CATS_CONVERT_INT_TO_EXT
CATS_CY_LOAD_DISTRIBUTION
CATS_CY_LOAD_DISTRIBUTION_KORR
CATS_ENRICH_READ_DATA
CATS_FILL_INTERFACE_LO
CATS_FIND_TARGET_DOC_AFRU
CATP
CATS_CALL_TRANSACTION_CAT4
CATS_CHECK_ATT_ABS_AUTHORITY
CATS_CHECK_AUTHORITY
CATS_CHECK_AWART
CATS_CHECK_AWART_HOURS
CATS_CHECK_EMPLOYEE_ACTIVE
CATS_CHECK_PERNR_LIST
CATS_CHECK_PROFILE_AUTHORITY
CATS_CHECK_SINGLE_PERNR
CATS_COMPUTE_HOURS
CATS_DELETE_HR_INTERFACE
CATS_FILL_ICLVA
CATS_GET_ALP_CURRENCY
CATS_GET_BASIC_INFOTYPES
CATS_GET_EMPLOYEE_NAME
CATS_GET_INFOTYPE_0001
CATS_GET_INFOTYPE_0315
CATS_GET_PAY_SCALE_TYPE_AREA
CATS_GET_PERNR_LIST_0001
CATS_GET_TARGET_HOURS
CATS_HR_ABSENCE_ATTEND_TEXT
CATS_HR_ADD_WAGE_TYPE
CATS_HR_CHECK_001
CATS_HR_CHECK_ALP
CATS_HR_CHECK_INFOTYPE_BOOKED
CATS_HR_DETERMINE_INFTY
CATS_HR_DISPLAY_DOCUMENT
CATS_HR_GLOBAL_CHECK
CATS_HR_LGART_TEXT
CATS_HR_READ_POSITION_TEXT
CATS_HR_READ_PREMIUM_TEXT
CATPEXTERN
CATS_GET_ABSENCE_ATTENDANCE
CATS Cross-Application Time Sheet
CATS_BUILD_CATSD
CATS_CHECK_FACTORY_CALENDAR
CATS_CHECK_FACTORY_DATE
CATS_CHECK_INPUT
CATS_CHECK_PERNR
CATS_CONVERT_CATSDB_TO_CATSD
CATS_CONVERT_LONGTEXT
CATS_CREATE_NEW_RECORD
CATS_ENRICH_INPUT
CATS_EXTERNAL_INTERFACE
CATS_EXTERNAL_WORKLIST
CATS_FILL_INTERFACE_CPR
CATS_GET_COUNTER
CATS_GET_CUSTOMER_TEXT_FIELDS
CATS_GET_DERIVATIVES
CATS_GET_LONGTEXT
CATS_GET_UNIT_HOUR
CATS_GET_WORKLIST_TEXT_FIELDS
CATS_INTERFACE
CATSCHECK
CATS_EXTENDED_CHECK
CATS_GLOBAL_EXTENDED_CHECKS
CATSEXTERN Functions for External Linking
CATS_GET_INFLUENCES CATS: Read Field Selection
CATS_GET_PERIODSTART
CATSTOOLS
CATS_ACTIVATE_MESSAGES
CATS_CHECK_APPLICATION
CATS_CHECK_CATSDB_AFTER_SAVE
CATS_CHECK_CONSISTENCY_AT_SAVE
CATS_CO_SET_TRANSFER_FLAG
CATS_CO_UPDATE_CATSCOSUM
CATS_GET_PROFILE
CATS_GET_PROFILE_AUTHGROUP
CATS_GET_PROFILE_FROM_USER
CATS_GET_UPDATE_BUFFER
CATSXC
CATSXC_READ_CATS_PROFILE
CATSXC_READ_FEATURE_VALUES
CATSXC_ROUND_QUANTITY
CATSXC_UPDATE_COMP_DTL
CATSXC_UPDATE_TCATX_COMPONENTS
CATSXT
CATSXT_CHANGE_TIME_SHEET
CATSXT_DISPLAY_TIME_SHEET
CATSXT_EXTERNAL_INTERFACE
CATSXT_FIELD_SELECTION_MODIFY
CATSXT_GET_PERSONNEL_NUMBER
CATSXT_GET_TIME_SHEET_DATA
CATSXT_SET_CURRENT_WORKAREAS
CATSXT_START_GUI
CATSXT_TRAVEL_MANAGER_GET_DATA
CATSXT_TRAVEL_MANAGER_SET_DATA
CATSXT_ACCOBJ
CATSXT_ACCOBJ_SET_FIELDSELECT
CATSXT_ACCOBJ_SET_TIME_SHEET
CATSXT_ACCOBJ_SET_VALUES_TAB
CATSXT_CLEAR_ACCOUNTING_OBJECT
CATSXT_DETERMINE_OBJECT_NUMBER
CATSXT_GET_OBJECT_DATA
CATSXT_GET_OBJECT_NUMBER
CATSXT_GET_OBJTYPE_FOR_ACCOBJ
CATSXT_INIT_ACCOUNTING_OBJECT
CATSXT_SET_OBJECT_DATA
CATSXT_SET_OK_CODE_ACCOUNTING
CATSXT_APPR
CATSXT_APPR_SET_TOOLBAR
CATSXT_APPR_USER_COMMAND
CATSXT_EXIT_EXAMPLE
CATSXT_CUSTOMER_EXIT_EXAMPLE
CATSXT_F4
CATSXT_F4_OBART
CATSXT_F4_TASKLEVEL
CATSXT_F4_TASKTYPE
CATSXT_SET_F4_FOR_ACCOBJECT
CATSXT_SET_F4_FOR_TASKLEVEL
CATSXT_FUP
CATSXT_ENTRY_SHEET_DISPLAY
CATSXT_FUP_CATS_FLOW_INFO_GET
CATSXT_FUP_FLOW_BACK_INFO_GET
CATSXT_FUP_GET_HISTORY_FOR_CNT
CATSXT_FUP_RESET_HISTORY_BUFF
CATSXT_SERVICE_NUMBER_READ
CATSXT_UTIL
CATSXT_CALL_USER_DFLT_DIALOG
CATSXT_CHECK_DFLT_DERIV_ACTIVE
CATSXT_CHECK_TYPE_LEVEL_AUTH
CATSXT_CHECK_WORK_DAY
CATSXT_COMPARE_STRUCTURES
CATSXT_GET_ACCESS_KEY
CATSXT_GET_ADDRESS_DATA
CATSXT_GET_CENTRAL_CONTROL
CATSXT_GET_CUSTOMIZING
CATSXT_GET_DDIC_FIELDINFO
CATSXT_GET_HOLIDAYS
CATSXT_GET_SMARTFORM_NAME
CATSXT_GET_TEMPORARY_KEY
CATSXT_GET_USER_ID_OF_PERNR
CATSXT_LONGTEXT
CATSXT_MOVE_STRUC1_TO_STRUC2
CATSXT_OPTIMIZE_OUTPUT
CATSXT_OPTIMIZE_OUTPUT_TC
CATSXT_SIMPLE_TEXT_EDITOR
CATSXT_SPLIT_LONGTEXT
CATSXT_SUBSCREEN_CONTROL
CATSXT_TABSTRIP_CONTROL
CATSXT_USER_DFLT_DIALOG
CATSXT_WRITE_HEADER
CATS_CO
CATS_ACT_ALLOC_CHECK
CATS_ACT_ALLOC_SENDER_CHECK
CATS_CHECK_AC
CATS_COBL_CHECK
CATS_COST_ASSGMT_CHECK
CATS_ITS
CATS_ITS_GET_POPUP_STATUS
CATS_ITS_GET_SCREEN
CATS_ITS_MAKE_STRING_NUMERICAL
CATS_ITS_SET_OKCODE
CATS_ITS_FUNC_CO
CATS_GET_COSTCENTER_ACTIVITY
CATS_LEVELING
CATS_GET_LEVELING_DATA
CATS_SERVICES
CATS_GUID_GET_KEY
CTHR
CATS_ATTABS_COSTINSERT
CATS_BATCH_TRANSFER_HR
CATS_BATCH_TRANSFER_HR_BKG
CATS_BUILD_SEND_MAIL
CATS_CALL_RCATSTHR
CTXT
CATS_CO_READ_OBJECT_TEXT
CATS_HR_READ_OBJECT_TEXT
HRTIM00ABSATTEXT
CATS_ATTABS_CHECK
HRTIM00F4HELP
CATS_F4_HELP_AWART
CATS_F4_HELP_CURRENCY
CATS_F4_HELP_LGART
CATS_F4_HELP_PRAKN_PRAKZ
CATS_F4_HELP_TRFGR_TRFST
PTEX
CATS_CHECK_INFOTYPE_POSTED
revert back if u require Bapis.
Maybe you are looking for
-
I simply want this: All my junk from my old iTunes on my new system, all my junk from my iPhone on new system. All in well-backed up place on my time machine backup. Is it really this hard? It shows up in ITunes and all that jazz, everything is updat
-
Wrong amount in VAT Declaration Box Report
Hi, I am running the VAT Declaration Box Report, but the EU Vat Code (acqusition/reverse) amount doubles up. I have box number 2 with XX2 box component and XX2 has E2 and E21. The total of the invoices listed shows an amount, but the actual box compo
-
on an image of the product with a micro usb in to itunes. I understand this means that an update didn't work but I don't own a micro usb or have itunes on this laptop. Is there any way of fixing this without itunes or a micro usb?
-
I cannot find the page to back-up my IPHONE 6
All I want to do is back-up my IP6, or at least see the different back-ups that I have on my computer. But when I plug in the IP6 it takes me to an ITunes page where I can see all my albums, but not any drop down menus that lets me see my devices.
-
Problem finding Adapter WSDL files......
Guys, I have installed and configured a Siebel Adapter on AS 10.1.2.0.2, BPEL PM 10.1.2.0.2 and Adapters 10.1.2.0.2 on Solaris. My adapters WSDL file is located in $ORACLE_HOME/adapters/application/wsdls However, when I am build my BPEL process using