Function Module to find Planned Costs and Actual Costs against WBS element

Dear All,
We have a requirement where we need to find out the Planned Costs and Actual Costs booked against a WBS element, in a year. The costs can be against all the plan versions or on individual plan version.
Are there any function modules to retrieve this value?
Thanks for the help.
Warm Regards,
Judith

Hi,
The easiest way would be to get the OBJNR for all WBS elements from PRPS and look up RPSCO and summarize for Value type (RPSCO-WRTTP) 1 for planned cost and 4 for Actual cost.
Please let me know if this helps.
jibat

Similar Messages

IW32 needed Plan Cost and Actual Cost table name

Hello ,
In IW32 transaction Plan Cost and Actual cost in cost tab ---Table Name.
Req: needed plan cost & actual cost table names for particular order number.( For New Report )
Can you please let me know where Plan cost & actual cost get stored in IW32 in Cost tab ( table name / function module name ) or how its get calcualted for particular order number.
Thanks in advance !
Regards
Rahul

hi ,
i too had same issue , i wrote following FS for that :
Actual and planned cost from PMCO-WRT00 to WRT12(the sum of values should be considered for actual as well as planned ) for PMCO-OBJNR taken from CAUFV -OBJNR for order number AFIH-AUFNR and also currency from CAUFV-WAERS .
Actual cost will have valuation type PMCO-WRTTP = 4 and planned cost will have valuation type PMCO-WRTTP = 1 , which will be placed in different column
hope this helps
regards
satish

In which table production order planned cost and actual cost i can see?

Dear PP Guru,s,
from which table i can see productuion order planned and actaul cost. i checked following tables AUFK, AFVC, AFVV, CAUFV, AFRU, AFKO, AFPO. but i did not found planned cost and actual cost field. is there any other way to get this data with respect production order?
Regards,
sree

Dear,
Planned and actual costs of prod order from COEP, COSS, COSP S027 tables
production order shows the planned cost based on the quantity structure.
Please refer my reply in this thread for details,
Re: Actual Halb Material Cost
Regards,
R.Brahmankar

Dashboard content is not populated with Planned Cost and Actual Cost

Hi
We are working in cProjects 4.0 + ECC 6.0 implementation. I could not get the data for columns in Planned Cost and Actual Cost in cProjects Project Dashboard. I have properly mapped the config settings and created and assigned a Project in PS
Has anybody got this data in the Dashboard?
Kindly suggest the solution
with regards,
K Rama Krishna
9394712743

Hi Rama,
It is difficult to say, where the problem is.
but typically, the causes of the problem are
customizing is set incorrectly or the evaluation is not carried out.
You can run the the evaluation DPR_EVE_BATCH_DPO additionally, please untick the flag 'check the last changed date'.
Hope, it helps.
Kind regards,
Zhenbo

Estimated Cost and Actual Cost

Hi Friends,
Can someone tell me, which MM tables(logically database) has these fields stored?? Estimated cost and Actual cost??
Note : Where and How can I find the logical data base??
Thanks alot in advance,

Yes thank so much for your quick help.
I see here we can get 1- Plan cots , 4 Actual cost, But in PMCO, how can we get the estimated cost, I see that WRTTP = 1 also contain the value for estimated cost but not plan cost . Please help me.
Thanks

Target cost and actual cost not picking in production order

Hello,
The target cost and actual cost is not updating in production order when I display it in CO03 in cost analysis.
Even though we have maintained planned price in KP26.
Please suggest how it can be populated.
Best Regards,
Tapan

Hi Tapan
For Target cost
1. Your std cost must be released before Goods Receipt
2. There must be goods receipt posted on the prod order
3. You must calculate variances in KKS1/2
For Actual Cost
1. Post Goods receipt and Goods issues
2. See if any mat movements are pending in COGI
3. Ensure that operation is confirmed in PP and no entry is lying in COFC
Regards
Ajay M

Target Cost and Actual Cost

Hi All,
When is the target cost and actual cost gets populated and from where does the data comes from liek labour,machine,overhead cost comes?
Thanks in advance

Dear Friend,
speaking from controlling point of view, target and actual costs will be flown from "costing variant planned" and "costing variant actual" respectively.In above mentioned varinats, whats the process has to be followed to calculate material costs,activty costs,overhead costs etc will be defined. These variants will be assigned in order type dependent parameters OPL8.
Target Costs - In standard cost estimate(ck11n),target cost will be calculated in the following way
                          -material cost from material master and BOM
                          - activity costs from routing( for this u need to plan the activity costs in KP26)
                          - other costs from the definitions of planned costing variant.
                   - after running the standard cost estimate,u need to mark n release(ck24).
Actual Costs - material costs frm goods issues (via goods mvmts thru MBIA,MB1B etc) against
                      production/process order.
                          - activity costs(as per the price u plannned in KP26)through operation confirmation in
                            COR6N/CO11N.
                          - any other costs like overheads,cost center issues etc as per the process defined
                            in 'actual costing variant'.
Hope this will clear your doubt.
Rams.

Huge Variance between Target cost and Actual Cost

Hi,
In Product Costing,I am getting Huge variance between Target cost and Actual Cost.It is showing the Target Cost as ZERO.Why i am getting this target cost as Zero? what could be the reason? Kindly help me in fix this issue.
Thanks
Supriya

Dear,
First do the GR final DEV for Production order
You need to do the variance calculation in KKS2, then when you save the variance, the target cost is calculated.
Target cost appear after GR. And you will get the Variance also right.
Please try and come back.
Regards,
R.Brahmankar

Function module to find both sold and ship to party

Is there any function module to find both sold-to-party and ship-to-party based on the sales Area.
That is if i give sales org , distribution channel , division as input . I must get Sold-to-party and Ship-to-party as output.
Regards,
S.Velsankar

Hi,
You can find sold to and ship to party customer from KNVP Table as below:-
SELECT      KUNNR
FROM KNVP
INTO w_sold_to_party
WHERE VKORG = YOUR SALES ORG
AND     VTWEG = dist channel
AND    SPART = division
AND    PARVW = 'SP'.                        "Sold to party depneds of how its configured in your system
Check TPAR table for description Sold to part and pass the PARVW value.
Similarly for ship to party
SELECT      KUNNR
FROM KNVP
INTO w_sold_to_party
WHERE VKORG = YOUR SALES ORG
AND     VTWEG = dist channel
AND    SPART = division
AND    PARVW = 'SH'.                        "Sold to party depneds of how its configured in your system
Regards,
Subhashini

Function module to find start date and end date of fiscal year for company

Hi,
Is there any function module exist which will provide me start date and end date of fiscal year for company code and fiscal year provided?
Thanks & Regards,
Parag

Hi,
please check this link
it would be very useful
http://www.sapdevelopment.co.uk/fmodules/fms_fiscalyr.htm
Thanks and regards
durga.K

Which Function Module can find all direct and indirect subordinate.

Hi,
I have a employee number(Chief of a organizational unit A). Do you know which function module can get all the direct and indirect subordinate of this chief? Indirect subordinate means that this chief can also view the Organizational unit(for example, Org. unit B) that under Org. Unit A. Further more, this chief can also view all the employees in other org unit that under Org. Unit B. If there is no such function module, do anyone of you have the example coding to get it? Your help is greatly appreciated. Thanks.

use RH_STRUC_GET
~Suresh

Variance key for calculating variance between planned price and actual cost

Hello CO Experts,
I am not following standard cost estimate. I am using price control V for FG. Now I did all the process:
1. Process Order creation
2. Process Order confirmation
3. Template Execution
4. Process Order revaluation
5. Process Order - TECO.
Now when I am running KKS2 (Variance), system is giving following error:
Only remaining var. in version 0 - no target costs for 000001000047
It means system is searching target cost in process order. However, since I didn't executed standard cost, system will populate target cost. Hence my requirement is that the system should calculate variance with respect to planned cost.
Also I have assigned variance key to target version 1. In that assignment, I have selected "planned / preliminary cost" in target cost section.
When I am running KKS2 (variance analysis), system is calculating for both versions. Because of this, it is giving error. There is no input parameter, where I can give specific version.
Please help

Hi Deepak,
For Finished Goods materials if you assigned Price control V (Moving Average) it is irrelevant to run the Standard Cost Estimation.
My earlier client we don't have variance because of the Moving Average Price for Finished Goods.
Please check, It is really required Variance?? If it is required check whether variance key is automatically assigned to Process order or not. (Control Tab)
Ravi Polampalli

Std Costing and Actual costing at process Order

Hello Friends,
Followings are the client requirements, Please give me your ideas :-
1 . Costing variant is same for all three - costing run, process order (plan and actual), means there is no prices variance on process order level. ( material at std price, Activity plan price, overhead fix%)
2. Alongwith this above client also need to capture actual result (material at MAP, activity at monthly actual price, overhead fix %)
In this case there is price and usage variance can see.
Now as I think that both scenarios are not possible on process order level. According to me we can do by a customize actual costing cockpit.
Need your openion that do we have any option thru standard funcations of sap to get this requirement. If you need any other explanation , please do let me know.
Thanks
Ravi

Thanks friends. I have done.

Function Module to obtain Initial Budget and Available Budget of WBS

Hi,
I need to calculate the value for Initial and Available budget for WBS which comes in the report S_ALR_87013558 or S_ALR_87013648.
Is there any FM to calculate for the particular WBS.
Thanks

Hi,
Try using KBPR_READ_DATA function module.
Regards,
Eli

PLANNED AND ACTUAL COST IN A PROCESS ORDER

From where the planned cost of material and activity types in cost itemizationafter creation flow ?From where the actual cost of a material and activity types in cost analysis of process order after confirmation flow?

You may be knowing you give Costing Variants ( Both actual as well as Planned ) in Order type. These Costing variants contains Valuation variants which says which costs are to be taken while creation ( for Planned Cost ) and Actual cost ( while confirming and Moving Goods) to be calculate. These Variants decides mode of Cost Flows.
Now, Data in Planned costs are Standard Cost figures or Current prices for material or Planned Prices of Activities.
As far as Actual costs are considered it may be the price for the consumed quantity @ the moving average price of the day or activity price for the qty. consumed which include up planned consumption too.....
Reward if you find useful

Function Module to find Planned Costs and Actual Costs against WBS element

Similar Messages

Maybe you are looking for