G/L accounts maintainance in the table v_T8G17

Dear All,
Our user is asking to maintain the G/L account groups in the table v_T8G17.
We can maintain this data by using the T.Code "SM30".
But i would like to know why we are maintaining the G/L account groups here. Where we use this G/L accounts.
We have maintaining the data under the operating chart of accounts.
Please let me know about some information about this.
Thanks and regards,
Mr.Rao.

Hi,
Actually the user is saying like this:-
Background:      Due to the profit center splitting in PN1, whenever you need to create a new account it has to be
                               maintained in addition in table T8G17, otherwise it is not possible to post.
                               Now I have a problem with our local accounts!
                               At the time when we implemented the German company codes it seems that previous company implemented the local accounts existing at that time as single entries in the table. This means, that each time when we need
                               an additional local account we need to go through the helpdesk IMAC-process (which takes too long).
                               I have checked the table and the other European countries in production system did it betteru2026u2026they have implemented account ranges that cover all entries that could be needed.
                               (With this change desribed in the CMD we now also want to have the singles entries beeing deleted and
                               change to ranges.)
But here we are using 4.7c version. I hered only that document splitting is only possible in 6.0 version.
Regards,
Mr.Rao

Similar Messages

GUID Maintained in the Table SXMS_AE_AUDITCNF

Hi Experts,
Can you please tell me from where and how the message IDs are taken in this table?
Thanks
Sugata B Majumder

Hey
>where and how the message IDs are taken in this table?
It is in built
Cheers
Agasthuri

Alternative Reconcialtion account while doig the MIRO

Hi All,
One of the cleint required alternative Reconcialtion accoutn while doign the MIRO. Scenario like this there is one Vendor 'A' used supplies Raw material and Serives to company. Business is not intrested to create new vendor. But they needs different reco accounts for one vendor master.
I did mentioned customization in SPRO :-
1. Maintain the Alternative Reco accounts
2. Select the ready for input check box of Recon accounts.
But still system is not accepting to change reco account while doing the MIRO. Change happens while doign the FB60
Rgds
SumaMani

HI sumamani,
As you are aware that it is not possible to change the reconciliation
account in MIRO.In transaction FB60, it is possible to change the field
value. SAP give us only the permitted account maintained in the
customizing table THKON.
In MM, the accounts are automatically determined from the
customizing in transaction OMWB, or taken from the purchase order
account assignment data.You can also have a quick look in tr OMRMB,
you will notice that field INVFO-HKONT is not there to be customized.
There is no solution available within the SAP standard system for the
change of the reconciliation account for the vendor.
According to the information I got from the responsible development
department I can only inform you that the required functionality will
not be implemented in SAP standard for MM invoice verification.
Field in question is hard coded and can not be changed.
MM invoice verification was developed to finish the external procurement
process in logistics and check the invoice data sent by the vendors for
correctness (differences) and to post the corresponding accounting
document in FI additional.
Creating manually creditor invoices in FI have no relation to a logistic
process.
Therefore not all functions included in FI (FB60) are included in MM
invoice verification (MIRO) as well.
reg
Madhu M

Need a fms query on G/L account code for the AP Screen

Hi SAP B1 Experts,
Could somebody suggest a simple query I could run on the G/L account code field to select a particular account code when using a particular BP code.
So for example I would like the user to be able to choose just 2/3 accounts instead of the mass list you get based on the BP partner he is looking at.
Do I need to add a UDF field into the BP for the particular Account Code I want associated with him?
Any suggestions would be appreicated as I want to cut down the time on search the g/l code list as it is quite long
regards
Paul

Hi Rahul,
I think I follow the below overall however I have setup the UDT and created the UDF's BP CODE and ACCOUNT as you suggested.
How do you associate the BP Code with the Account Number in the Table?
So for my example:
I will setup a Supplier Code and two account codes with it.
BP Code: S1234 Account 1234567
S1234 Account 1234567
I have tried setting up default values but they don't appear to work. I must be doing something wrong as nothing appear when I query the table. Have I missed a step here?
Once the table is right I assume I then use the FMS Query below to look at the table based on my UDT vs the OPCH.Cardcode Field?
If I can get the table right I think I follow your example from there
thank you both for a quick response

How to get vertical scrolling in the table

Hi Experts,
Appreciate your help. I have created table in the screen but couldnt get the vertical scrolling option. It was able to get the horizontal scrolling but not vertical. Can you please guide me how to get it.
Thanks

Hi,
Vertical scroll bar will come automatically if more entries are maintained in the table.
Hope this helps,
Reward points if helpful,
Thank You,

Error F5507 on MIRO. "The general master data of the G/L account 161000 is not maintained in the chart of accounts 1000"

I was doing a MIRO w.r.t PO. I was getting the following error - "The general master data of the G/L account 161000 is not maintained in the chart of accounts 1000." I later went ahead and created the GL Account in the COA. now the error is recitified. But, I would like to know what happens in the background.
Could someone explain me this? How is the G/L account determined?

Hi,
At the time of MIRO system posts below Accounting Entry:
GR\IR Clearing Account Dr--> This will be picked from t-code OBYC- key WRX
Vendor Account Cr--this will be picked from vendor master data
If there are any tax or TDS involved then system post to those accounts as well.
I guess 161000 is your recon account? Because if it is GR\IR then you would have got error at the tim e of MIGO ( if you have already done that)
Hope this is clear to you.
Br,Vivek

Problem in the table maintainance generator of View J_3RFV_F4VERS

Hi All,
I have a problem with View J_3RFV_F4VERS (SAP standard table for Russia).
Currently i am not able to change the entries in this View through SM30. Currently in the Table maintainance generator of this view "Standard recording Routine" is selected as Recording Routine.
But when i change this to "no, or user, recording Routine", i am able to change the entries of this view through SM30.
I would like to know the impact of selecting the alternative Recording Routine. Will it have any adverse impact?
Please throw some light on this issue.
Regards,
Navin.

Use Events in Table Maintainence Generator.
Environment-->Modification --> Events
U can write a subroutine which can be called to increment the numbers .

Date field is missing in the Table maintainance generator

Hi,
A table is created. A date field is there in that table. I tried to create a table maintainance generator for this table using 2 screens. Table maintainance generator is created. But when I go to SM30 , I am unable to see this DATE field in the SM30 , in the first screen. But when I go to maintainance screen , I am able to see this field. This particularly happening with date field.
Could you please help me.
Regards,
Satya

go to se11 and type the table what you want.
utilities, table maintenance generator.
you config the options that you need.
press F6 and go to sm30.
its only this.
Regards

Who maintained entries in the table

Hi,
I want to find out who maintained entries in the SAP table B006 and who all has authorization for the same.
Also it would be great if could help me to find a place in SAP where I can find the documentation realted to the table.

Check in SCU3 transaction.

Genaric Include in event of the table maintainance genatrator

hi,
i want to create a include that should be genaric ( it should work for all tables ) to update the fileds like creator name, create date, change name and change date which are in the include structure .
this include can be used in the event of the table maintainance genarator . this should work for all tables.
can any one help me in this regard.
cheers,
srak.

any updates...
cheers,
srak.

How is the table DDSHPVAL50 maintained ?

How is the table DDSHPVAL50 maintained ?

Hi,
go through this link having steps to create personal lists.
[create personal lists|www.tarrantcounty.com/titan/lib/titan/training/CreatePersonalListsGeneral.pdf]
Once you maintain this table DDSHPVAL50 will have values against ur user id.
Kr Jaideep,

Account owner is not BP maintained for the global ultimate

Hi,
I am getting the error "This account owner is not BP maintained for the global ultimate" while saving the opportunity.
How do I resolve it?
Chaitra

Simply check if Account Onwer is maintained in the Account of the Opportunity

Name of the table for Standard Output/Cost maintained in in the IO

Dear All,
We go to KO03, enter the order no, display the order. Go to extras, Cost analysis. There are two columns. Total target cost and total actual cost. I need to find out the name of the table where the target cost/standard output is stored.
Thanks in advance,
Thanks,
Satya

Hi,
The tables are :
COSP
COSS
COSL
COSB
Regards,
Eli

How to Maintain Values in the Table control?

Hi,
I'm Saikumar.
I've done a table control program.
When I click SAVE or ENTER Button, the values are getting saved into the database(This is working alright)......but when I click those buttons, The values entered in the table control are getting cleared.
What should I do in order to have those values in the table control itself when I click SAVE/ENTER? (I need to create multiple records at a time)
What I've done is:
IF sy-ucomm = 'SAVE' OR sy-ucomm = 'ENTR'.
INSERT into <database table> values wa_matgl.
MODIFY it_matgl from wa_matgl INDEX tc1-current_line. "tc1 is the table control name.
Refresh it_matgl.
endif.
I tried many ways but the vales are getting cleared in the table control? (I need to create multiple records at a time).
Please suggest a way to overcome it.
Thanks in advance,
saikumar

Hi ...
Just to add...
were there any values in the internal table it_matgl initially in the PBO screen to be shown to the users ?
if the answer is no...then......
i came across the same coding in DEMO_DYNPRO_TABCONT_LOOP_AT.....
here also in PAI..when we press enter..the values are not retained...
MODIFY it_matgl from wa_matgl INDEX tc1-current_line. "tc1 is the table control name.
because i believe the modify statement is not working.coz the it_matgl is empty..pls check if sy-subrc = 0....after the modify statement....if it is not...then we need to insert the data into the it_matgl using an append statement
for this it_matgl needs to be with header line...
Pls explore the following....
data : it_matgl type table of XXXX with header line.
in the section
IF sy-ucomm = 'SAVE' OR sy-ucomm = 'ENTR'.
INSERT into <database table> values wa_matgl.
MODIFY it_matgl from wa_matgl INDEX tc1-current_line. "tc1 is the table control name.
if sy-subrc <> 0.
move corresponding wa_matgl to it_matgl.
append it_matgl.
clear it_matgl.
endif.
endif.
Pls check and revert
Regards
Byju

OVS - Maintain the amount of the table column

Hello all,
when implementing the OVS for a field, it does display for every output element of my model node a column in the OVS table. How can i alter the amount of shown table columns?
E.g. The model node which displays the table of the OVS has 20 columns (20 attributes). Now i want the OVS table not to have 20 columns but just 5.
How can i achive this?
cheers,
Markus

Hi Markus,
You can do something like this,
In the OVS custom controller, have a value node like Output_data which has only those attributes which you need to display in the ovs list.
When you execute the BAPI/RFC, copy the model output data to this output node.
From the view ,when you implement the OVS for field using method addOVSExtension, pass this new output value node, instead of using the model node(Also replace the model node with this node whereever appropriate - eg: in applyResult())
Hope that helps,
Thanks,
L Menon
Message was edited by: LM
L Menon

G/L accounts maintainance in the table v_T8G17

Similar Messages

Maybe you are looking for