Transferring data to a new computer

Hi. Not sure if this is a good place to ask (if the solution to this might be in another thread, and you can redirect me, please do) - my brother is giving me his 15 inch MacBook Pro and I'm looking for instructions on how to transfer all the data on my G4 PowerBook onto his MacBook. (He's upgrading to a bigger screen. Aren't I lucky!!!!) I have extensive iTunes and iPhoto collections. Can someone help me with this? I posted this question on the PowerBook forum too. Sorry if that is not "done".
Regards
Jenny

Well, you were close. This is the "Mac Pro" forum, not the "MacBook Pro" forum.
Assuming your G4 has a Firewire port:
1. Repair the hard drive and permissions on the G4.
2. Repair the hard drive and permissions on the MBP.
3. Turn off both computers.
4. Connect a Firewire cable between the two computers.
5. Boot the G4 into Target Disk Mode by restarting and after the chime press and hold down the "T" key until the TDM screen appears.
6. Boot the MBP normally. After startup you should see a hard disk icon for your G4 on the MBP's Desktop.
7. Transfer your data files using drag and drop.
8. Upon completion eject the G4's disk from the Desktop and disconnect the Firewire cable.
Do not transfer PPC applications, plug-ins, etc. nor replace any system files on the MBP with ones from the PPC because they will not work.
A Basic Guide for Migrating to Intel-Macs
If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate. Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
Rosetta supports "software that runs on the PowerPC G3 or G4 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
Classic Environment, and subsequently any Mac OS 9 or earlier applications
Screensavers written for the PowerPC
System Preference add-ons
All Unsanity Haxies
Browser and other plug-ins
Contextual Menu Items
Applications which specifically require the PowerPC G5
Kernel extensions
Java applications with JNI (PowerPC) libraries
See also What Can Be Translated by Rosetta.
In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior (does not work), TechTool Pro (pre-4.5.1 versions do not work), SuperDuper (newest release works), and Drive Genius (untested) may not work properly on Intel-Macs. The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries.
Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
Additional links that will be helpful to new Intel-Mac users:
Intel In Macs
Apple Guide to Universal Applications
MacInTouch List of Compatible Universal Binaries
MacInTouch List of Rosetta Compatible Applications
MacUpdate List of Intel-Compatible Software
Written by Kappy with additional contributions from a brody.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now shutdown the computer for a couple of minutes and then restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Why reward points?(Quoted from Discussions Terms of Use.)
The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

Similar Messages

  • Transferring camera roll into new computer.

    So... I got my laptop stolen and decided to get a new one. The thing is that I can't seem to download the Photo Library pictures from my old computer that are stored in my iphone, into the new laptop... is there anyway i can do that?
    Thanks!
    J.

    Photos captured by your iPhone and a photo saved from a received email, from a website, or from a received MMS are stored in your iPhone's Camera Roll. Photos in your iPhone's Camera Roll can be imported by your computer as with any other digital camera.
    The title of your post is "Transferring camera roll into new computer" which you aren't asking about. You are asking about importing or transferring photos from your iPhone's Photo Library, which is completely separate from and has nothing to do with the Camera Roll.
    Photos transferred from your computer via the iTunes sync/transfer process are stored in your iPhone's Photo Library, which is a one way transfer process only - from your computer to your iPhone. Photos transferred from your computer are optimized for viewing on your iPhone as part of the iTunes transfer process - the original resolution of these photos is reduced on your iPhone.
    Photos stored on your computer should be included with your computer's backup along with all other important data - stored on an external drive or some other external media used for backup purposes only which should be kept in a separate location from your laptop in the event it is lost or stolen. The iPhone is not designed or intended to be used as a backup storage device.
    There are some 3rd party paid utilities that provide for transferring these photos in the opposite direction, but such utilities are not supported by Apple and the original resolution of these photos will be lost in the process.

  • I'm moving an internal hard drive from an old computer to a new computer.  How do I transfer the catalog data to my new computer so the Organizer of Photoshop Elements 6 will find the data on the hard that has been moved to the new computer?

    I'm moving an internal hard drive from an old computer to a new computer.  (My new compute runs Windows 8.1) How do I transfer the catalog data to my new computer so the Organizer of Photoshop Elements 6 will find the data on the hard that has been moved to the new computer?  Is this possible or do I have to use the procedure of copying the catalog along with the photos to a back up hard drive and then restore them on the new computer?

    The 'normal' procedure is to do a PSE organizer backup (not a copy or a backup from external tools) to an external drive, then a restore to the new location.
    The advantage is that you have a backup of both catalog and media files and you don't have all disconnected files, which would happen with external backup tools. Also, if you restore with a more recent elements version, the catalog will be automatically updated to the new format.
    The drawback in your situation is that you'll have either to overwrite all your files or restore to a custom location, creating a duplicate photo library (which supposes you have enough free space).
    It would be possible to simply use the organizer in the old PC to move the catalog to a new 'custom' folder just under your C: root drive. The catalog would be accessible once the drive will be installed in the new PC. Then you would have all files 'disconnected' due to the fact that all your media files are now on a drive with a different letter. Reconnecting a whole library is a hard job with PSE6, less so with PSE11/PSE12.
    If the idea of fiddling with the sqlite database with external sqlite manager tools is ok for you, I can describe the process more in detail. You only copy your catalog folder (as suggested above) to another location. Instead of trying the 'reconnection' way, you install the sqlite utility on the new computer. When the old drive is installed in the new computer, you simply edit a given record in the catalog database, catalog.psedb, and start the organizer with your copied catalog by simply double clicking the 'catalog.psedb' file.
    Even if the last solution is much, much quicker, I would still create a new PSE backup : you have never too much safety .

  • Transferring Elements to a new computer

    I downloaded Photoshop Elements a couple years ago and just bought a new Mac. Can I transfer Elements and Bridge to my new Mac? I put the files on a drive and transferred it to my new computer, but they aren't working right. Any suggestions?

    What is the version of Elements you are trying to install. And also program cannot be migrated from one computer to another, you have to install it to make it work.

  • I transferred CS5 to a new computer using PC transfer program. CS5 started up on the new computer OK, but now does not recognize raw files. Should I uninstall and reinstall again?

    I transferred CS5 to a new computer using PC mover ultimate. CS5 appeared to start up normally, I had to insert the serial number from my original CD. However, now the program does not recognize CR files and Adobe bridge is not working properly.  I get messages that CS5 needs to be updated, but the updates fail. What should I do? Should I uninstall CS5 on the new computer, uninstall CS5 on the old computer using the original CD, and then reinstall CS5 using the CD on the new computer?

    Transferring programs does not work well with Adobe applications.  You should install them.
    As far as having the program on different machines goes, you are allowed to have two activated installations so if it is working on the original machine there is no reason to remove it unless you need the space.

  • Will I lose my saved data in apps, games, and pictures by transferring over to a new computer?

    I got a new Ipad. I'm going to sync it with all my songs and apps from my computer. I'm getting a new computer soon. When I transfer the apps and songs to that computer and update my Ipad on the new computer, will I lose my pictures and saved app data because of the new computer?

    You won't lose the data if you transfer purchases and restore the iPad from a backup. Read this thread where this very same issue was discussed. Read my post (Demo) and read King Penguin's post as well. As long as you follow these instructions you should be able to move all of your apps, music, saved data, photos and all iTunes content to your new computer.
    Remember to turn off auto syncing in iTunes, Transfer Purchases and backup the iPad before you sync any content at all. It is all explained here.
    https://discussions.apple.com/thread/3305461

  • Data Transfer to NEW computer--how to??

    Hello all!!
    Received just today a new Powerbook and was about to start the transfer of data and other "stuff" from my old computer (800 MHz flat-panel iMac) to the new computer.
    With regard to APPLICATIONS, as I have been told before, I will be installing any applications FRESH on the new computer and will set the preferences and other information as needed once installed.
    With regard to other "regular DATA"...Word files, MP3 files, text files, PDFs, image files, etc...the NON-application/NON-system files. Is there a special way that I should go about with the data transfer other than simply hooking p the computers via Firewire and dragging the data files to the new location on the new computer?
    The amount of data I will be transferring will probably be in the range of 10 to 20 GB.
    Also, while I'm doing this data transfer...before, during or after...once I have transfer this information to the new computer file locations, should I be doing a permissions repair or defrag or other "cleanup" operation??
    Thanks for your help!!
    Scott

    Hi, Scott. The time to make sure both your Macs are in perfect order is before you transfer your files. On each Mac, boot to your OS installer CD or DVD and Repair Disk, repeating the routine until you get two successive "Appears OK" verdicts. Then reboot to your hard drive and Repair Permissions. Then use the Terminal or MacJanitor to force the daily, weekly and monthly background maintenance tasks to be performed. These steps should assure that your data and your HD directories are in good shape before you transfer your files.
    It can't hurt to repair permissions again on the new drive after you copy the files to it, but it probably isn't really necessary. Be sure to copy them to the same places on your new PB's HD that they occupied on the old one, if the same OS version and applications will be installed on both machines.
    Nothing that you copy will be fragmented after it arrives on the new machine, and Tiger will take care of most fragmentation that occurs later without needing any help from you.

  • Transferring music to a new computer

    Is it really as straightforward as transferring the existing iTunes music folder contents to the new machine?

    These are two possible approaches that will normally work to move an existing library to a new computer.
    Method 1
    Backup the library with this User Tip.
    Deauthorize the old computer if you no longer want to access protected content on it.
    Restore the backup to your new computer using the same tool used to back it up.
    Keep your backup up-to-date in future.
    Method 2
    Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
    Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
    I'd recommend method 1 since it establishes an ongoing backup for your library.
    Note if you have failed to move contacts and calendar items across you should create one dummy entry of each in your new profile and iTunes should  merge the existing data from the device.
    If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See make a split library portable.
    Should you be in the unfortunate position where you are no longer able to access your original library or a backup then then see Recover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data.
    tt2

  • Transferring Data to my New Mac w/ Firewire

    I'm transferring data from an old MacBook to a new one, but I sent the old one to a family member for an insurance evaluation, and Snail Mail has completely rendered the screen useless. Before, there was a top corner I could use but now the whole screen is shot. I've already bought the Firewire cord for Migration Assistant so I want to know if I can still use the program and cord to transfer my files.

    You should be able to; if necessary, start up the old computer with the T key held down.
    (34757)

  • N manually moving Safari data over to new computer, must I move the Safari plist?

    Old computer is too old to use Migration Assistant, and since I'm moving hardly any of the old applications from 10.4 I'm getting ready to move all my data manually via Firewire.  Should I take or leave the old plist?

    You only need .plist files for applications you will transfer over to the new computer.
    A Basic Guide for Migrating to Intel-Macs
    The Knowledgebase article Intel-based Mac: Some migrated applications may need to be updated refers to methods of dealing with migrating from PowerPC chips to Intel with the Migration Assistant safely. The authors of this tip have not had a chance to verify this works in all instances, or that it avoids the 10.6.1 and earlier Guest Account bug that caused account information to get deleted upon use of the Migration/Setup Assistant. However, a well backed up source that includes at least two backups of all the data that are not connected to your machine will help you avoid potential issues, should they arise. In event it does not work, follow the steps below.
    If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate.  Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
    Rosetta supports "software that runs on the PowerPC G3, G4, or G5 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
      1. Classic Environment, and subsequently any Mac OS 9 or earlier applications
      2. Screensavers written for the PowerPC System Preference add-ons
      3. All Unsanity Haxies Browser and other plug-ins
      4. Contextual Menu Items
      5. Applications which specifically require the PowerPC G5 Kernel extensions
      6. Java applications with JNI (PowerPC) libraries
    See also What Can Be Translated by Rosetta.
    In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
    If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
    If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
    The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
    Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior, TechTool Pro , SuperDuper , and Drive Genius  work properly on Intel-Macs with Leopard.  The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries.  Leopard Cache Cleaner, Onyx, TinkerTool System, and Cocktail are now compatible with Leopard.
    Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
    Additional links that will be helpful to new Intel-Mac users:
      1. Intel In Macs
      2. Apple Guide to Universal Applications
      3. MacInTouch List of Compatible Universal Binaries
      4. MacInTouch List of Rosetta Compatible Applications
      5. MacUpdate List of Intel-Compatible Software
      6. Transferring data with Setup Assistant - Migration Assistant FAQ
      7. OS X Lion: How to use Migration Assistant to transfer files from another Mac
    Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode, copying the critical contents to CD and DVD, an external hard drive, or networking will work better when moving from PowerPC to Intel Macs.  The initial section below discusses Target Disk Mode.  It is then followed by a section which discusses networking with Macs that lack Firewire.
    If both computers support the use of Firewire then you can use the following instructions:
      1. Repair the hard drive and permissions using Disk Utility.
      2. Backup your data.  This is vitally important in case you make a mistake
          or there's some other problem.
      3. Connect a Firewire cable between your old Mac and your new Intel Mac.
      4. Startup your old Mac in Transferring files between two computers using FireWire.
      5. Startup your new Mac for the first time, go through the setup and
           registration screens, but do NOT migrate data over. Get to your
           desktop on the new Mac without migrating any new data over.
    If you are not able to use a Firewire connection (for example you have a Late 2008 MacBook that only supports USB:)
    1. Set up a local home network: Creating a small Ethernet Network.
    2. If you have a MacBook Air or Late 2008 MacBook see the following:
      a. MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch,
          Late 2008) - What to do if migration is unsuccessful;
      b. MacBook Air - Migration Tips and Tricks;
      c. MacBook Air - Remote Disc, Migration, or Remote Install Mac OS X and
          wireless 802.11n networks.
    Copy the following items from your old Mac to the new Mac:
    In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
    In your /Home/Library/ folder:
    /Home/Library/Application Support/AddressBook (copy the whole folder) /Home/Library/Application Support/iCal (copy the whole folder)
    Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
    /Home/Library/Keychains (copy the whole folder) /Home/Library/Mail (copy the whole folder) /Home/Library/Preferences/ (copy the whole folder) /Home /Library/Calendars (copy the whole folder) /Home /Library/iTunes (copy the whole folder) /Home /Library/Safari (copy the whole folder)
    If you want cookies:
    /Home/Library/Cookies/Cookies.plist /Home/Library/Application Support/WebFoundation/HTTPCookies.plist
    For Entourage users:
    Entourage is in /Home/Documents/Microsoft User Data Also in /Home/Library/Preferences/Microsoft.
    Credit goes to Macjack for this information.
    If you need to transfer data for other applications please ask the vendor or ask in the  Discussions where specific applications store their data.
    5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
    Written by Kappy with additional contributions from a brody.Revised 5/21/2011

  • HT1296 We have a new computer, do I just sync my ipad and iphone to it to transfer data onto the new computer?

    We have a new computer, do I just sync my ipad and iphone to the new computer to transfer my data onto it?  My husband has some very complicated looking instructions for transferring his music on his ipod.

    No. The ipad/iphone are not storage/backup devices.  They simply mirror the selected content from the computer to which they are synced.  If you sync to another computer, the current data will be erased and replaced with content from the new computer.
    You copy everything form your old comuter, or your backiup copy of your old computer, to your new one.

  • Transferring Data from iPod to computer.. please help!

    Hi... recently my computer crashed and everything has been deleted.. i am running on a new computer and i can not update my iPod or else i would lose all my songs.. It would take me forever to download all the songs i have on my iPod and i heard from a relative that there was a process that would allow you to download all your data on your iPod on to a computer.. is there such a way and if so can someone please tell me how?

    "i can not update my iPod or else i would lose all my songs"
    If your iPod is set to update automatically you just need to take care when connecting back to your computer and an empty iTunes. You will get a message that your iPod is linked to a different library and asking if you want to link to this one and replace all your songs etc, press *No* (or "Cancel" if you are using iTunes 7). Pressing "Yes" (or Erase and Sync in iTunes 7) will irretrievably remove all songs from your iPod. Your iPod should appear in the iTunes source list from where you can change the update setting to manual and use your iPod without the risk of accidentally erasing it. In iTunes 7 Check the "manually manage music and videos" box in Summary then press the Apply button. Don't uncheck Sync Music it will be unchecked by default when you choose the manual setting: Managing content manually on iPod
    "i heard from a relative that there was a process that would allow you to download all your data on your iPod on to a computer"
    You can't sync or drag your non iTMS music back directly from an iPod to iTunes. The transfer of non iTMS content is designed by default to be one way from iTunes to iPod, the transfer of purchased content has recently been introduced with iTunes 7. However there is a manual method of accessing the iPod's hard drive and copying songs back to iTunes on Windows posted in this thread: MacMuse - iPod to iTunes
    If you prefer something more automated then there are a number of third party utilities that you can use to retrieve the music files and playlists from your iPod, this is just a selection. Have a look at the web pages and documentation for these, they are generally quite straightforward. As iTunes 7 is just out some of these may not have caught up with it yet though I haven't experienced any problems with the Mac software I use.
    YamiPod Mac and Windows Versions
    iGadget Windows Only
    iPodCopy Mac and Windows Versions
    iPod Access Mac and Windows Versions
    PodUtil Mac and Windows Versions
    iPodCopy Mac and Windows Versions
    PodPlayer Windows Only
    CopyPod Windows Only
    For more on the new function in iTunes 7 look under under File>"Transfer Purchases from iPod" which transfers iTMS purchases. A paragraph on it has been added to this article: How to use your iPod to move your music to a new computer
    Whichever of these retrieval methods you choose, keep your iPod in manual mode until you have reloaded your iTunes and you are happy with your playlists etc then it will be safe to return it auto-sync again. I would also advise that you get yourself an external hard drive and back your stuff up in case you have problems again. External drives are comparatively inexpensive these days and you can get loads of storage for quite a small outlay.

  • Transferring purchased songs to new computer

    I'm in the process of saving all the information I have stored on my current computer because I'm set to receive the new iMac within a few days. I would like to transfer all my purchased music (from iTunes Music Store) to the new computer -- is it best to burn audio CDs and re-import in the new computer? Is there a way to transfer one's entire iTunes library to a new computer?

    BookCase, there are several ways this can be done. If you are going to burn, you need to burn as data CD's not audio as data CD's will hold much more content. You can back everything up to an EHD, plug in the EHD to the new G5 & drag the whole folder back into iTunes. The EHD is what I wanted to do when I moved from a PC to a Mac 3 weeks ago as I had backed my whole library up to an EHD for over six months. It didn't work because I had formatted the EHD where the Mac couldn't read it. The 3rd option which is what I ended up doing is a nice little 3rd party app, iPodRip. It worked like a charm, opened it, attached the iPod, clicked on recover, & BAM, 13GB library was transferred into the new Mac. The only thing I had to do was drag & drop my playlists from iPodRip into iTunes. If your interested in iPodRip, check on Versiontracker.com. Hope this helps!

  • I have transferred my music to new computer but music is not showing in iTunes - although is on the computer as if I select a song from the folder it will play that song via iTunes. How can I get my music to show?

    I have transferred my music to a new computer following the instructions carefully but for whatever reason the music does not show on iTunes on the new computer. The music is there as I can access it via My Computer and if I select a song it will show in iTunes and play - however I can not do this for every single track! Can anyone suggest something I have done wrong????

    Media was moved via external hard disk, and I think I moved the iTunes Media folder after consolidating it.

  • I have music in iTunes that was purchased with an account that no longer exists. I'm transferring music to a new computer so the new iTunes is asking me to sign in to the old account to authorize the old music. Is there a work-around for this?

    Just to clarify: I purchased some of my older music in iTunes with an account that got deleted. I cannot recover or use this old account. I transferred music from my old iTunes to a new computer and that new iTunes on the new computer is asking me to sign into the old account to authorize the music. So, is there another way to transfer this music to my new iTunes? I'm using a USB thumb drive to transfer the music. Also, music that was purchased with my current account tranfers just fine.

    Click here and request assistance.
    (95437)

Maybe you are looking for