G//L Report Displays NO Budget Data

Hi Friends,
In one of my G/L report, i need to display Actual Data & Budget data.
Actual Data is coming from 0FIGL_C01 cube and Budget data coming from Flat File.
When i execute the query based on G/L Account, i'm getting all the data both for the Actuals & Budget.
But, when tried to execute based on Financial Statement hierarchy (0GLACCEXT),
i'm not getting any budget data.
Comments on this shall highly appriciated.
Thanks,
Muvva

Thanks Voodi.
I already have 0CHRT_ACCT as compound object for 0GL_ACCOUNT in my budget data.
As 0GLACCEXT (Financial Statement Item) Hierarchy Coming from Virtual Cube, somewhere i'm missing logic to bring both Actuals & Budget in the same line with 0GLACCEXT in row.
for 0GL_ACCOUNT in row, my report is displaying both Actuals & Budget in the same line.
Thanks

Similar Messages

Upgraded to Crystal 2008 - one of my reports now has no data

Upgraded to Crystal 2008, now at (12.3.0.601).
However one of my reports (which was previously developed in Crystal X1) is now coming up blank.
I've tested the data on the previous system and the report comes back correctly so there is not an issue with data.
The report is built using XML Schema files and assigning the datasource from VS2008.
When the application is built with Crystal X1, this works fine.
I've refreshed the report using crystal 2008 but no good.
Other reports which use SP's as the source are working fine!
Any suggestions?

Thanks for the quick response.
What I mean by 'I refreshed the report in Crystal 2008' is that I opened the report in Crystal 2008 and verified it.
I did not have to do this with the other reports.
I cannot test this in the designer as the data gets assigned from the application.
However, the old version of the report with the same data works fine.
Note - there are no error message. The report displays with no data.
There are no code change made so everything points to the report which is strange.
Other reports work correctly but this one is different as it uses XML source.
Thanks.
Edited by: Lehause on Aug 24, 2010 3:40 PM

How to display the header data on different position in alv report

hi all,
how to display the header data on different position in alv report.
for example ,
customer                                                   name
xxxx                                                         xxxx
                 vendor        name     street
                  xxxx         xxxx      xxxxx
pls   help me .

hi
as per my understanding you need to trnasfer header internal table data to pdf..
please check the following links for internal table to pdf..
Convertion of Internal table data to PDF
This link is related to ur issue
Re: how to insert the calling of the FM: OTF to PDF
Thanks

Crystal Report 9 - Can't Display UTF-8 Data

Dear Sir,
I am using PHP with Crystal Report 9.2 and has problem displaying UTF-8 data from MSSQL field. It shows weird characters instead. I am very sure the data stored in database is in UTF-8 because when I ouput it into the web browser with encoding as UTF-8, it shows correctly. Currently is using ADODB recordset to pass data into CR. I tried using ODBC to connect directly to database and preview the data - same issue.
Now I wonder whether are there any settings need to be done in CR in order to display unicode correctly? From what I read, CR 9 and above should be able to support unicode.
Thanks
AL

To be honest, I have no idea if TTX files supported UTF-8... I kinda doubt it. I'd check, but the only person I knwo of that may have a clue is not in until September 28...
Re. ODBC, see if adding the following option to your DSN entry in the odbc.ini file will help:
stmt = SET CHARACTER SET utf8
Also, if I remember right, MS SQL does not install UTF-8 support by default (at least at one time or another it did not...(?).
Oh - one more thing. I've attached a non CR app that I'd like you to use to see what the data it returns looks like. Please give that a try.
- Ludek
Edited by: Ludek Uher on Sep 7, 2011 10:43 AM

Report that can display the installation date of an application or program

Hi,
Would like to ask if anyone knows a built-in report in SCCM 2012 that can display the installation date of an application or program, either it was through deployment with SCCM or through manual installation?
Thanks in advance!

Got this to give me the report that I wanted but eliminating some entry on the SQL Query that
Peter van der Woude gave. Here's the Query I used to display the computer name, name of software, date of installation and day since installation of the software.
SELECT TOP (100) PERCENT
dbo.v_R_System.Name0,
dbo.v_GS_ADD_REMOVE_PROGRAMS.DisplayName0,
dbo.v_GS_ADD_REMOVE_PROGRAMS.InstallDate0,
DATEDIFF(Day, CONVERT(date,dbo.v_GS_ADD_REMOVE_PROGRAMS.InstallDate0), GETDATE()) AS [days since installed]
FROM
dbo.v_R_System INNER JOIN
dbo.v_GS_ADD_REMOVE_PROGRAMS ON
dbo.v_R_System.ResourceID = dbo.v_GS_ADD_REMOVE_PROGRAMS.ResourceID
WHERE
(SELECT ISDATE(dbo.v_GS_ADD_REMOVE_PROGRAMS.InstallDate0)) = 1
GROUP BY
dbo.v_R_System.Name0,
dbo.v_GS_ADD_REMOVE_PROGRAMS.DisplayName0,
dbo.v_GS_ADD_REMOVE_PROGRAMS.InstallDate0,
DATEDIFF(Day, CONVERT(date,dbo.v_GS_ADD_REMOVE_PROGRAMS.InstallDate0), GETDATE())
Thanks
Peter van der Woude!

PS Report on Project Budgets per Year

Hi SDN'ers
I hope I am posting this question to the correct forum, apologies if not!!!
We are on ECC6, and I am trying to find a report or transaction which will allow me to enter a PS Project number and which will display the budget values for that project per year. The values I am trying to see are things like Original Budget, Actual Budget, Commitments, Carryover from previous Year, etc. So for example, if I have a project which was created in 2000, I want to be able to see the values as they were in each year from 2000 until now.
I would appreciate it if anyone could assist me.
Regards
Rayan

Hi Vinay
I am not sure - I am actually an Abap'er and I need this report to verify data that I have to extract for the users. We do not have a PS consultant so I could not ask him how our PS system is configured.
I was hoping that there would be a general SAP report that would be able to give me the PS budget information that I need.
thank you
Rayan

DBI Budget data not showing in Dashboard

Hello all,
I have an issue in DBI Budget dashboard.
I have two different Business Group with different COA and Calendar. I did DBI setups for both.
My issue is I can not able to select only one business group's related ledger while selecting Budget in DBI (N: DBI Admin: Setup > Financials > Financial Dimensions Setup > Source Ledger Group > Budget).
Then I ran DBI Request Set Program. Now DBI Report is correctly.
If I want to Define another business group related Ledger then we have to change the Period in Define Parameter (N: DBI Admin: Setup > Global > Define Parameter ).
Again we have to run DBI Request Set Program. Now Budget information is not displaying in Dashboard.
Please guide me to resolve this issue.
Thanks and Regards,
Muthu

Hello all,
Before running Request Set we have to run Upload Budget and Forecast concurrent Program.
Now Budget data will populate in DBI.
Regards,
Muthu

How to create a report to bring all data from two different Info providers

Hi All,
I have a peculier problem while creating a report. I have two custom info providers one DSO and another Cube. There are only two common fields between these two Info providers . I need to create a report such that the report displays all the values from DSO but user can have the selection option on one of the fields in the Cube.
Here is an example
DSO Contents:
DocNum-     DocItem-     DocText-     Amount-      Quantity
10000----     10----            ABC----          100----           10
10001----     20----     DSN----     200----     10
10005----     20----     DSN----     200----     10
Z1003----     10----     CAN----     500----     1
Cube Contents
DocNum-     DocItem-     Date-----          InvoiceAmt
10000----     10----     1/10/2009----         50
10001----     20----      2/20/2009----        100
10005----     20----      2/25/2009----        100
The report needs to be displayed as shown below when the user selects value for date from 1/10/2009 to 2/20/2009
DocNum-     DocItem-     DocText-     Amount-      Quantity
10000----     10----     ABC----     100----     10
10001----     20----     DSN----     200----     10
I hope this was clear for you to understand. I would really appricate if any one can answers about how to resolve this problem. I cannot add the date filed to DSO and I also have Doc Num and Item as the user selection fields in the report.
Thank you all in advance and i would really appreciate for your suggestions.
Regards
Chinna
Edited by: chinna2479 on Mar 3, 2009 7:38 PM
Edited by: chinna2479 on Mar 3, 2009 7:39 PM

Hi chinna,
Two possible options, I can think of now, but both of them may be a compromise with performance.
1. create an infoset and then a query on top of it, provided we have a one to one relation in both the targets. That is, the combination of doc and item number is not duplicate in either cube or ODS.
2. Create a master data object of doc and item number and have date as an attribute. Load that from cube data and make date as navigational attr.
Use this navgntal attr for selection in your report.
Let us know, if you require any further info.
Naveen.A

Genearate a Report for the following data

Hi All
The following is of my requirement
Selection Screen Should be as follows:
Plant (required) QALS-WERK
Storage Location MCHB-LGORT
Material Number QALS-MATNR
Batch Number MCHB-MATNR
MRP Controller MARC-DISPO
Inspection Lot Number QALS-PRUEFLOS
Inspection Lot Creation Date QALS-ENSTEHDAT
Inspection Lot Origin QALS-HERKUNFT
PO Number QALS-EBELN
Vendor # EKKO-LIFNR
Goods Receipt Date MKPR-BUDAT
Delivery Number QALS-KTEXTLOS
Marked in House Date
Sterile Load # ZC012-STBAT
Supplying Plant EKKO-RESWK
Profit Center QALS-PRCTR
Radio Buttons for Selection Screen:
 Show all stock (not just Q stock)
 Show only past due stock (GR Date + GR processing time > today)
 Include Serial Numbers
Fields for report:
Plant QALS-WERK
STO/PO QALS-EBELN
Delivery/Production Order # QALS-KTEXTLOS
Sterile Load # ZC013-STTYP
Inspection Lot Number QALS-PRUEFLOS
Material QALS-MATNR
Old Material MARA-BISMT
Serial #s (all serial #s with material ITOB-SERNR
batch combination)
Batch QALS-CHARG
Sloc (all SLOCs with Q status items) MCHB-LGORT
Batch Exp Date DFBATCH-MHD_IO
Quantity (in each SLOC) MCHB-CINSM
Profit Center QALS-PRCTR
Date Marked In House ZTMODE-TDATE
GR Date QALS-ENSTEHDAT
Expected GR Processing Time MARC-WEBAZ
Date Moved to NCMR MKPF-BLDAT
Days in House System date ZTMODE-TDATE
Days in QI System date - QALS-ENSTEHDAT
Days from QI QALS-ENSTEHDAT - MKPF-BLDAT
Days in NCMR System date - MKPF-BLDAT
MRP Controller MARC-DISPO
MRP Controller Name T024D-DSNAM
Standard Cost MBEW-STPRS
Extended Standard Cost MCHB-CINSM * MBEW-STPRS
How we can develop a report for the above, because they havn't given any conditional checking. Supress if any Ztables used.
i would appreciate if you can send an earliest reply and reward points for the same.
if any queries just reply me i can clarify.
Regards
Prabhu

Hi Prabhakar,
Well you can opt for ALV display...
You want to generate report based on plant data..
Once the user enters the plant, you can extract the remaining info from table MARA, QALS, EKKO.
The radio buttons will decide your selection critera.
I dont think any functional guy will give you everthing spoon feeded. You will have to explore those tables and the relevant fields.
In case you are finding it to difficult to get the relations between the tables or finding list of tables,
i shall send u docs which will help u solve the problem.
Give me ur email id
Regards,
Tanveer.
Mark helpful answers
Message was edited by: Tanveer Shaikh

ICR process for Open item recon.(003) - Report Display issue

Hi All,
I am facing a problem in the data reconciliation report display.The document number "1212121212" doesn't not exist in the SAP system.But "1212121212" is used as the reference number in the another document which is created in the SAP.
Legacy data file.
RCOMP RASSC       DOCNR                ATYPE        RACCT      RTCUR     TSL
L001     U001     1212121212     C     CCU001     USD     200
In the data selection process, i am using the following inputs.
Company code - L001, U001.
Vendor - CCU001,CCL001.
Customer - CCU001,CCL001.
In the data assignment process, i am using the following inputs.
Company - L001, U001.
Trading Partner - L001, U001.
Rule - 300, 400.
Rule - 300 config.
200     DOCNR     Document Number     Equal     DOCNR     Document Number
Rule - 400 config.
200     DOCNR     Document Number     Equal     REFNR     Reference Number
In the reconciliation report display (right side bottom page),
U001->L001->Payables or other way around L001->U001->Receivables (Top Left side).In the either of the two display am able to see two items.
first item (not expected in the report display, bcoz there is no relevant data present in the legacy file).
TR.PT PRT.DOC.NO PR.CUR Amount DGC Difference Reference no
U001 1700036236      USD       500       USD   500          TEST
The first item exist in the SAP and it is getting selected during the data selection process.
second item (reconciled and expected in the report display)
L001     U001     1212121212     C     CCU001     USD     200
Kindly help.
Thanks in advance
Regards,
Karthik

Hi Ralph,
Yes we are having two company codes.your understanding on this point is rite.
I am using the standard file upload functionality from the presentation server for uploading the non-sap company data.since in the earlier thread i had explained very detail level, so now had made it short.
The only issue that I am having is that I have just one line item in my upload file and it is from non sap company L001 for trading partner u001. File gets loaded (data selected 1 correctly), Then after all the steps when I am in the last step (reconciliation) I see that line getting reconciled with other line available in U001 with zero difference. That looks good because it is matching as per my rule. but I am also seeing some other open items in U001 that are also getting reconciled with no lines in file with difference equal to their values. They should not show up in the bottom part of reconciliation part at all as they are still open in U001 and should not get reconciled until I put their offsetting lines in upload file from L001. So they should stay at the top right side in simple words I am seeing open items as well in reconciliation portion bottom one even I do not have any lines to reconcile them and they are showing a balance in them as well.
Thanks in advance.
Let me know, if you need any more details.
Regards,
Karthik

BW Report Performance, Accuracy of Data

Hi,
Can someone help give explanations to following questions :
1.) Does BW Report show how current is my data?
2.) What are the reason why the performance of my BW Report is slow?
3.) What are the reason why my BW Report is have missing data?
4.) Why is my BW Report have incorrect data?
5.) Why doesnu2019t my BW Report Data match SAP R/3 Data?
Thanks,
Milind
Locked - duplicate post and very generic questions
Report performance and data quality
Edited by: Arun Varadarajan on Apr 9, 2010 2:07 AM

Hi,
1) Does BW Report show how current is my data?
Yes, Last refresh of your data stat in query Properties.Run report and check the details for last refresh.
2.) What are the reason why the performance of my BW Report is slow?
Reason could be:
Poor Design
Business Logic (Transformations)
Nav attributes used in the reports
Time dependent MD
Aggregates missing
Data Vol in the Cubes or DSO's
http://wiki.sdn.sap.com/wiki/display/BI/SomeusefulT-CodeforBIperformancetuning
3.) What are the reason why my BW Report is have missing data?
Check the source system data and check mapping in transformation with all the business logic.
4.) Why is my BW Report have incorrect data?
Depedns if you are loading from FF or R/3 or your are cleansing the data once it enters in to BW.
5.) Why doesnu2019t my BW Report Data match SAP R/3 Data?
Check the Source system data in RSA3 and pick one Document and run the same document in BI.
Thanks!
@AK

Data not submitting when I have a conditional display on a date field

Hello all,
Could someone please help me with the following issue?
I have created an updateable report region with four updateable fields. 3 of the fields store a number values and the fourth stores a date value.
Each updateable report item has a conditional display, and whether they are displayed or not is controlled by the end user using a radio group (with submit). This provides the user with three options.
If I remove all conditional displays all data will commit to the database without any problems. If I apply the conditional display to the number fields only, again the data will commit as normal. However, as soon as I add a conditional display to the date field it all goes pair shaped. The data will then cease to commit, with no error message at all. Once I remove the conditional display normal service is resumed.
I'm certainly an APEX novice at the moment, so I wondered if anyone could shed some light on this.
Thanks in advance for your help
Steve

Stew,
Basically, I have edited each applicable report field column attributes, via the report attributes tab, and selected a conditional display 'Value of item in Expression 1 = Expression 2' for all of them.
In the same report region I have created a radiogoup with submit called p51_update_type, specifying three static return values; R, F and S
Condition e.g.
*"Expression 1"*
p51_update_type
*"Expression 2"*
S
All columns display as expected, and commits to the database are normal, that is until I apply a conditional display to the date field (which relates to a table column of type DATE in the database).
Thanks
Steve

Does SAP have report display the history of dunning

Dear Expert,
Would like to seek for your help,Does SAP have report display the history of dunning for AR module and what are the T-code and report?
Please help.
Regards,
KH

Hi
Dunning status is updated in customer master,you can get the required data from Table LFB5
hope this will help to some extent
Thanks
Kameshwar Rao

Bex Report display issue

Hi Experts,
I have a requirment where I want to display the details of my Service Order In and Out date wise.
Like
Ser. Order No...............Ser. Ord Date..............................................Delivery No.................Delivery Date
1000.................................01-02-2010.................................................123..................................03-02-2010
I want a report which will take the date range input (01-02-2010------20-02-2010). And display a report like below
Calander Date..............01-02-2010........02-20-2010..........03-02-2010...........04-02-2010
..........................................In---OutIn-OutIn-OutIn---Out
Ser. Ord No....................1..........0..................0.........0...............0.........1................
Please anyone help me to get the desired output. I have already posted in the forum but no body has replied me.
If I map the 0CalDay to Ser.Ord. Date then the OUT count is getting displayed in the Out Column of 01-02-2010 itself.
I'm totally out. Can't get any solution......
Hope there should be some experts out here.
Thanks

Hi Ananda,
Thanks for your reply,
I tried doing this earlier and even now. When I bring the Ser ord Cr Date and Out bound Date in the Selection.
And bring the Service order Cr Date and Out Bound Date in the Column above the No. of Records.
By doing so, I'm unable to differentiate which one is Inbout and which is outbound.
The output is not very clear and understandable.
Can you please suggest me anyother alternative if any.
Or can you please let me know how can I get the Complete Calendar Dates in the Column (For Example: 1.1.10... 2.1.10....etc) irrespective of whether I have a service order created or outbound done on that day.
Thanks

Report displayed based on Select List condition

Hello,
Any help would be appreciated.
I have a report and a select list, P55_MISSING. The select list contains the column names in the table that the report displays.
If I select one of the column names, I would like to display all records where that column name is null.
The sql I have at the moment is:
select
"ID",
"APPLICATION",
"SHORT_DESCRIPTION",
"DESCRIPTION",
"OPC_NET_NAMES",
"PROCESSING_SCHEDULE",
"PROCESSING_REGULARITY",
"PLATFORMS_INVOLVED",
"UNIX_DIRECTORIES",
"SOURCE_FILES",
from "APP_METADATA"
where :P55_MISSING IS NULL
If I select 'source files' for example, I would expect to see 3 out of 4 records stored in the table. However, I receive the message 'no data found'.
Any help would be great. Thank you.

Hi
In order to doe this you will have to use dynamic sql (so you have to change your report type to 'SQL Query (PL/SQL Function Body Returning SQL Query)').
It would then look something like this...
DECLARE
l_sql VARCHAR2(32767);
BEGIN
l_sql := 'SELECT id,
                 application,
                 short_description,
                 description,
                 opc_net_names,
                 processing_schedule,
                 processing_regularity,
                 platforms_involved,
                 unix_directories,
                 source_file
          FROM   app_metadata
          WHERE ';
l_sql := l_sql||:P55_MISSING||' IS NULL';
RETURN l_sql;
END;Sorry, I can't test this as I don't have your tables.
Cheers
Ben

G//L Report Displays NO Budget Data

Similar Messages

Maybe you are looking for