G41M-P28 video problem

Hi!
My video driver keep restarting in games.
First I had an Ati Radeon HD 5450 512MB but read that G41 boards don't really compatible with Ati cards higher than 5xxx so switched back to my Radeon X1600 256MB but the restarting still don't stop.
It is pretty random, with the 5450 it restarted for about 10 times in 5 min then was fine sometimes even for a few hours, sometimes it isn't restarted but the screen stayed black and needed to restart comp.
With the X1600 it restart less times and sometimes I could play for hours until it crashed, also when the driver fails it less likely restarts, usually just go black screen and comp locks or get blue screen.
Without cards its more stable but even with the integrated video it restarts or freeze sometimes.
Do I missing some bios or jumper setting? I bought the comp pre assembled a few months ago so the components should be compatible and be able to handle at least an old X1600. I tried XP SP3, Win7 32B, 64B, installed the newest drivers every time, tried both win update and manual install from the official Ati website but nothing worked.
System spec:
Pentium Dual-Core E5700 3.00GHz
MSI G41M-P28 (MS-7592)
BIOS : AMI V26.8 08/26/2011
4GB DIMM DDR3 PC3-10700U DDR3-1334 (9-9-9-25 4-34-10-5)
Radeon X1600/X1650 Series  (12 PS3.0, 5 VS3.0 499MHz, 256MB 297MHz, PCIe 1.00 x16)
Hitachi HDS5C1050CLA382 500.1GB (SATA300, 3.5", 5700rpm, NCQ, 6MB Cache)
TSSTcorp CDDVDW SH-222AB (SATA150, DVD+-RW, CD-RW, 2MB Cache)
Microsoft Windows 7 Ultimate 6.01.7601 (Service Pack 1) 32B
PSU: CIT-450W P4, 115/230V 7A/4A 50/60HZ

Quote
The webshop I bought it from sold dozens with the exact same config and they are still one of the best rated in eBay.
The shop may have a very good rating, because they have friendly personnel, good prices, deliver fast etc. etc., but that does not mean the stuff they sell is any good.
Your CIT-450W PSU is junk, that is for sure. And your Colorsit 420W device is not only old, but of very low-quality as well.
Quote
even the lower priced Corsairs are too expensive
That may be, but you have to understand that it is impossible to pay £12.95 for a 450W PSU and expect it to be a reliable power supply.  Mate, this IS actually the most important component in your while system.  Every single other component depends on it!
Quote
I'm not quite sure if it's really a psu problem.
You cannot be sure until you test a device that is not some low-quality china cracker without manufacturer support.
Bring your system into a computer shop and let the people there test a proper PSU.  Then you know for sure.

Similar Messages

  • G41M-P28 sound problems

    I have a G41M-P28 ,core2DUo E8400, 4G DDR 3, 320GB WD HDD, Nvidia 8800 GTS, 450W PSU .
    I have problems with the integrated sound, works jerky.when I'm listening music the sound interrupts for miliseconds
    Can anyone help me with a solution? Thank you very much

    mosu81,
    don't resurrect or hijack old topics! >>Please read and comply with the Forum Rules.<<
    For your own problem always open an own thread. This time I did it splitting your hijack post off.
    For your problem: Uninstall sound driver and the install latest: http://www.msi.com/service/download/driver-2693.html

  • Problems with msi G41M-P28 (high pirtch Sounds)

    high pitch Sounds coming from the the bonds
    and it kill 2 of my hdd going to the 3th

    my gpu not working anymore (6 day ago)
    only i play game onboad GPu (Fable - The Lost Chapters)
    CPU brand, model and speed
    Intel Pentium E6500 2.93
    Motherboard model G41M-P28 (MS-7592)
    BIOS version V26.6   (03/02/2011)
    Memory brand,Corsair (7F7F9E0000000000)
    type/speed  DRR3 1333
    size  4GB
    number of sticks 1
    Video card   onboard
    Hard drive(s)
    brand,
    Seagate (ST3100028as)
    Samsung (hd103sj)
    size,  1 tb
    type,
    speed 7200rpm
    Any other peripheral cards and devices
    no
    Windows XP Sp1 x64bit
    Power Supply Unit brand
    Thermaltake Litepower 700W
    Model    W0356 / W0355

  • Problems with msi - G41M-P28

    Hi, I've problem with my new msi G41M-P28 mainboard. My computer freezes when I plug out usb flash drive when I'm into bios. In windows it's ok .. I hope..  but when I'm into bios and when I plug out usb flash drive the main problem (computer freezes) remains. With usb mouse computer not freez at all .. I''ve tried to test it with different usb sticks and it freezes .. not only in bios .. it freezes in dos too. Any solutions?  :(

    Hardware list of my pc:
    CPU: Intel Pentium Dual Core E5700 3.0Ghz
    RAM: 2GB Kingston KVR1333D3N9, PC3 - 10600 CL9 240
    HDD: Seagate Barracuda 7200.12 500GB
    PSU: Fortron FSP350-60APN, output: 350W, AC Input: 200-240V, 2.5A, 50-60Hz
    Mainboard: msi G41M-P28, Bios version : v26.6
    OS: Win 7 Pro 32Bit
    DVD-ROM: SpeedPlus SuperWritemaster SH-S223

  • MOVED: Problems with msi - G41M-P28

    This topic has been moved to Intel Core 2 Duo/Quad boards.
    https://forum-en.msi.com/index.php?topic=148662.0

    Hardware list of my pc:
    CPU: Intel Pentium Dual Core E5700 3.0Ghz
    RAM: 2GB Kingston KVR1333D3N9, PC3 - 10600 CL9 240
    HDD: Seagate Barracuda 7200.12 500GB
    PSU: Fortron FSP350-60APN, output: 350W, AC Input: 200-240V, 2.5A, 50-60Hz
    Mainboard: msi G41M-P28, Bios version : v26.6
    OS: Win 7 Pro 32Bit
    DVD-ROM: SpeedPlus SuperWritemaster SH-S223

  • G41M-P28 Overclock?

    I just bought an MSI  G41M-P28 as a replacement for another board that has been working well several years.
    I am not a serious overclocker, but the whole point on the Intel Core 2 Duo range was that you did not have to be.
    On my old board I just made one change in the bios, saved changes and rebooted to find my PC ran substantially faster.
    When I saw the MSI Bios I thought it would be the same, but no, it just would not boot.  On my old board it two resets would automatically undo the overclock, on the MSI it seems to take about 5.
    I tried to increase by just 1mhz and it did the same so obviously this is not going to be as easy as my last board.
    So is there an "eejiots" guide for this board, for a simple overclock as it seems I have to change more than one thing (my old board did it all automatically)
    I am not interested in doing anything that will damage it, just a simple overclock, my last board ran overclocked for years with no problems.
    I have DDR3 PC3-10600 1333Mhz ram and an E8200 CPU

    To say this first G41M-P28 is a low-end board not meant for oc so it won't work great on that task. If no oc at all is supported probably you haven't a E5800 properly supporting bios. Upgrade to latest version (with old cpu installed and no oc).
    bios: http://www.msi.com/service/download/bios-20034.html
    for flashing >>use the MSI HQ Forum USB flasher<<
    If no help follow >>Posting Guide<<

  • MSI G41M-P28 and graphic card

    Hello.
    I am new here and a have a problem, if somebody who know can help me.
    A have a motherboard MSI G41M-P28 and i want to buy a graphic card and i want to know what type of graphic card will work without problem on it.
    I read many discussion on this forum and it look this MB is not compatible with PCI Ex 2.1 because he had just PCI Ex 1.1. Please help me with some recomandation of graphic card to can run the newest games without problems. Someone said it work better with nvidia than ati? it is true? And what type of PCI Ex is working 100% with it?
    Thanks!

    Wonkanoby is THE expert. 
    If you can still get a GTX460, that would be an excellent choice. Alternativley look at the GTX550 or GTX560 series. Nothing the 560 won't play at reasonable resolutions.
    Your budget will determine what you want to spend. If you have the money, go for the 570.

  • Mini DVI to VGA Adapter Video Problem

    This year at Randolph-Macon College we replaced the Math lab Emac computers with IMac G5 Intel machines. The laboratory has an NEC model MT1050 projector with a manufacturer’s date of August 2002. We can not seem to get rid of ever present scan lines. We can slow them down and speed them up by adjusting resolution and refresh rates, but nothing will remove them. We are connecting the IMac to the projector via the Apple Mini-DVI to VGA Adapter. It is specifically designed for use with the iMac (Intel Core Duo), and the adapter connects to the Mini-DVI port of the computer and the VGA end of the adapter to an external VGA monitor or projector.
    Troubleshooting the problem we have swapped IMac Intel computers with no luck, but we still have to use the Apple Mini-DVI to VGA Adapter. When we hook the projector to a Intel Mac Book Pro, we have to use a different adapter, but then it works perfectly. In fact, everything we try using other adapters works fine, it’s just when we use the Apple Mini-DVI to VGA Adapter that we experience the video problem.
    Has anyone experienced this problem and if so, have you been able to remedy it?
    iMac (Intel Core Duo)   Mac OS X (10.4.8)  

    I don't have much to suggest, except to ask if you can try with a different mini-DVI to VGA adapter. (i.e. do you have more than one on hand to make sure yours isn't just defective?) Make sure it is firmly seated into the iMac.
    I use the same adapter to provide an extended desktop on an old CRT monitor and the display is great.

  • T400 - Video problems and a long wait for repair...

    Hi,
    I'd just like to state my experience with Lenovo Customer Support for a video problem with my T400.  Bottom line, as of today, it's been around 27 business days that it's been with Lenovo, and 41 days total since it's failed on me, and nobody, including Lenovo Customer Support, seems to know what its status is exactly, except that they're waiting on a part which has no ETA.
    In July 2009, I bought a T400, a 2764CTO version with the switchable graphics between the internal intel graphics and the ATI GPU.
    All was well until February 1st, 2010, when the LCD sudden wouldn't work.  Well, it would work, but the screen was very very dim, even with the display maxed out on brightness.  You would have literally bring your nose to the screen in order to even make out any text or images - definitely unusable.  However, if you hooked up an external monitor via the video output, the T400 would display video output properly that way.  When I did this, I noticed that the switchable graphics option wasn't there any more - couldn't switch to the ATI GPU.  Based on this, I figured it must be a video card or LCD issue, or a combination of both.
    So, I called Lenovo Customer Support (CS) at 1-800-565-3344, since I'm up here in Canada, and I initially was issued a case number of 41JRFSD, and I agreed to send it to a local Lenovo Repair Centre.  Oops, my bad, I made a mistake using the locator tool I was told to use at bplocator.lenovo.com, and thought the Centre was relatively close.  Not quite.  So, I called Lenovo CS again, and they issued me with a new case number, 40KWSYF, and said they'd send a box for return to depot.  And within 2 days, Feb 2nd or 3rd, I got a Purolator courier return box.  That's fast service!  Pleased, I put my T400 in according to instructions, and I sent it off.
    Fast forward to about mid-February.  I called Lenovo CS, and apparently there was a delay - the depot needed a part that wasn't in stock. Fine, I know these things can happen - I'll wait.
    Fast forward to March 1st.  I talk to a Lenovo CS rep, and it appears that the part needed has arrived, and they've put a rush order to get the computer back to me. Great!
    Fast forward to March 8th, still no computer.  I talk to another Lenovo CS rep... strange, there's no update.  The issue gets escalated to the Depot managers.
    Fast forward to March 12th.  Still no word on my T400's status.  An email fron CS has been sent to the depot.  Not even the CS reps know what's going on.  The rep I talk to figures there should be a response by the end of the day.
    Fast forward to today, March 13th, 4:50pm Pacific Time.  I just finish talking to Lenovo CS, there's been no response from the depot.  Apparently there's a part that they're waiting on for repairs, but there's no ETA on it.  Is it the same part that I've waiting on all this time?  Is it a new one?  I don't know. 
    At this point, I've been told to send an email explaining my situation, and I've also been told to talk to Scott the next time I call CS on Monday after 3pm Eastern.  I have to stress that the Lenovo Customer Support Reps I've talked to have all been very sympathetic and have been courteous, helpful, and professional - something I appreciate from having worked in Customer Support myself.  But the bottom line remains: my computer's not back to me.
    So, my questions to the community here: is my experience here typical?  Is there any hope of my seeing my computer back, or even at least just the hard drive?  I've used Lenovo computers for work for the past 7 years, and it was my good work experiences that led me to buying a Lenovo for home use.  However, it's been a while since I've been without my T400, and I was hoping to get my taxes done on the computer too, since they're due at the end of March.  I'll reserve judgement on Lenovo until I get my computer back, but at this point, all I can say is... I'm disappointed.
    If you're reading this, I'll let you judge my experience for youself.  I'll update my case as it progresses. 
    Thanks!
    Moderator edit: Removed support contact private information, per the Community Rules.

    Hi all,
    So, an update with some good news: my computer is finally back!  
    After a total of over 40 business days (just over 2 months) I finally have my T400 back at home, working again!
    According to the spec sheets, the repair depot had to replace: the systemboard/planar, display/LCD panel, LCD cable, PC card, bluetooth, and the inverter.  BIOS/Embedded controller was also updated, along with the regular diagnostics to ensure everything was working properly.
    I give Lenovo credit though: they got the final parts to repair the computer on Monday, April 5th, and shipped my computer back to me for the next day (today, April 6th).  That's fast service, once repaired!
    However, my case spans over 4 screens of updates and repair depot orders of parts.
    Also, it took me over 10 calls to Lenovo's Customer Service, plus an escalation to a higher-level manager after 1 month had passed, to get progress updates and ETAs for repair.
    Lenovo called me only once to give me an update, and that was the manager whom my issue was escalated to: all the other times, I called Lenovo for an update.
    The story doesn't end here, however:
    In talking to Customer Support, they told me that Sales might be able to sell me an extended warranty at a discount, given the issues I had.  And indeed, after talking to Sales, they offered me a 1 year warranty extension at a price of just over $100 CDN, plus tax.  This is a sale price, compared to the regular retail of $129.  Unfortunately, they can't sell me just one month.
    At this point, I refused their offer, and again escalated to a manager to request an extension of exactly 1 month on my existing warranty.  I figure 1 month delay in repairs, that's plausible - crap happens, and while most repairs take 5-10 business days, I can understand it can sometimes go higher.  Two months though....  My request for a warranty extension is being considered by the manager it was escalated to.
    So, one last question for you folks reading this: am I being unreasonable, talking to Lenovo support one more time to request a 1 month extension of my warranty, given the length of time it's taken for repairs?  I'll post the response Lenovo will give me tomorrow, as they've said they'll do.
    One thing for sure: Lenovo's response will definitely influence my choice of brand from whom to buy a new computer (and it will influence the choice of my friends who've heard my issues, and maybe yours too).  My particular repair problem may not come up often, but if it does happen to you, I'd be happy to know of your experience.
    Thanks for sticking with me through the drama!

  • Premiere Pro CS6 importing/ audio and video problems

    I recently recorded gameplay from my xbox, when i open this recording using windows media player it states that the video is 3 hours 30 minutes long, which is correct, when i then import this into premiere pro, premiere pro changes it to be 5 hours and 44 minutes long, when i then play this back it plays in slow motion and audio and video start to desync, i thought it may just be the source editor playing up so i made a clip and put it into the timeline and it still had the same outcome. The speed/duration are still on 100% so im not sure what to do, anyone have any idea as to what this is, or why it is happening?

    What are the attributes of your PVR video...
    specifically, is it variable frame rate?
    Media file evaluation utilities:
    GSpot
    http://www.headbands.com/gspot/
    MediaInfo
    http://mediainfo.sourceforge.net/en
    If it is VFR, Premiere no-likey.
    Variable frame rate video problems:
    http://forums.adobe.com/message/4897424#4897424
    http://forums.adobe.com/message/4071506#4071506

  • Why does a Safe Boot fix my video problem?

    After visiting my local Genius Bar twice (and getting two different answers), I erased and reinstalled Snow Leopard 10.6 on my late-2006 "white plastic" iMac.
    I reinstalled the version of SL that came with the iMac, then upgraded it twice to OS 10.6.8. Software Updater says all of my OS components are up-to-date.
    My video-corruption problems ("ghosting", "tearing", pixelation of icon, then the kernel CRASHES within 20 minutes) appear when I boot normally. But they permanently disappear when I reboot into the Safe Mode! 
    I've search Apple.com and every other site I can find without a clear answer to this:
    What extensions, StartUp items, software daemons or gremlins DO NOT load in Safe Mode? Shouldn't one of them be the cause of my problem? Or does Safe Boot work on a hardware-level, too?
    This happens on ALL accounts, both Admin and regular users. No external devices are connected except the wired mouse and wired keyboard.
    I've zapped the PRAM three times, and I've unplugged it for hours. Disk Utility shows everything is good, too. There's about 50 gigs left on the internal 750 GB hard drive.
    The so-called "Geniuses" both ran their Triage OS off an external drive and my iMac hardware passed ALL of their tests. One said it just needed a reinstall (a free fix!!), and the other said my video card is bad ($800, and I have to use an outside repair shop).
    Can someone give me an idea how to proceed? I've been working in Safe Mode for days, but that prevents me from using: Sound, my home network, fonts, Preview, editing in iPhoto, etc.
    Thanks.
    Specs:
      Model Name: iMac
      Model Identifier: iMac6,1
      Processor Name: Intel Core 2 Duo
      Processor Speed: 2.33 GHz
      Number Of Processors: 1
      Total Number Of Cores: 2
      L2 Cache: 4 MB
      Memory: 3 GB
      Purchase Date: March 2007

    Hi, Mike,
    Thanks for the quick reply.
    I read the linked post about QE, but I don't see how it could help me troubleshoot my problem. Could you clarify: is QE a piece of "software" (that is, a file -- like an extension)?
    If QE IS a piece of software that is disabled in a Safe Boot, I should be able to move it to my Desktop and restart. If my video problem is eliminated, the QE software is the problem, right?
    But then, if my problem is caused by a file/extension, why would the problem occur (and be eliminated in a Safe Boot) right after I re-installed the OS? Shouldn't all the System software be pristine right after re-installation? But since it's NOT fixed by the re-installation, it seems like a hardware problem -- like the expensive video card. That's what's confusing me.
    So, I'm proceeding as if the problem is caused by a file being loaded into memory and I'm trying to disable the items that don't load in Safe Boot Mode one-at-a-time. I just need a specific list of what those items are (and their locations on my hard drive).
    In OS/9, I used Conflict Catcher to do this automatically, but I haven't found an OSX app to do the same. So I'm trying to do it manually.
    Please excuse my layman's terms. Any help is appreciated.

  • Weird video problems with Mobility Radeon HD 4200

    Recently pacman upgraded the video drivers for my video card:
    [2011-04-17 12:48] upgraded xf86-input-acecad (1.4.0-4 -> 1.4.99_git20110318-1)
    [2011-04-17 12:48] upgraded xf86-input-aiptek (1.3.1-2 -> 1.3.99_git20110318-1)
    [2011-04-17 12:49] upgraded xf86-input-evdev (2.6.0-2 -> 2.6.0-3)
    [2011-04-17 12:49] upgraded xf86-input-joystick (1.5.0-5 -> 1.5.99_git20110318-1)
    [2011-04-17 12:49] upgraded xf86-input-keyboard (1.6.0-1 -> 1.6.0-2)
    [2011-04-17 12:49] upgraded xf86-input-mouse (1.7.0-1 -> 1.7.0-2)
    [2011-04-17 12:49] upgraded xf86-input-synaptics (1.4.0-1 -> 1.4.0-2)
    [2011-04-17 12:49] upgraded xf86-input-vmmouse (12.7.0-1 -> 12.7.0-2)
    [2011-04-17 12:49] upgraded xf86-input-void (1.3.1-1 -> 1.3.1.99_git20110318-1)
    [2011-04-17 12:49] upgraded xf86-video-ati (6.14.0-2 -> 6.14.1-1)
    [2011-04-17 12:49] upgraded xf86-video-vesa (2.3.0-4 -> 2.3.0-5)
    [2011-04-17 12:49] upgraded xkeyboard-config (2.1-1 -> 2.2.1-1)
    [2011-04-17 12:49] upgraded xorg-server-common (1.9.4.901-1 -> 1.10.1-1)
    [2011-04-17 12:49] upgraded xorg-server (1.9.4.901-1 -> 1.10.1-1)
    [2011-04-17 12:49] upgraded xvidcore (1.3.0-1 -> 1.3.1-1)
    and now my video sometimes is glitchy.  the output looks like this:
    Also the computer crashes sometimes when I view a flash video in full screen or when I come back to the screen saver.
    I think this has to do with the new video drivers but I'd like to know how I can fix the problem.
    I don't know what other logs to provide as I'm pretty new (using arch for a 9 months) and I haven't had video problems before.
    Last edited by sansar (2011-04-23 19:50:21)

    I just noticed that the video card crashes after i come back from sleep mode.
    Here's the kernel log: http://pastebin.ca/2050145
    and the Xorg.log: http://pastebin.ca/2050146
    For this crash, unlike the one that happens when I view a flash video full screen, the problem can be fixed if i log off and log back on.

  • ITunes / Quicktime Video Problems With Windows VISTA

    I took up Windows Vista as soon as it was available and initially had no problems with iTunes. Then later, video clips (those purchased from iTunes and those I had converted myself) started stuttering / freezing and eventually crashing iTunes and finally I lost audio as well.
    Ayyway to cut a long story short, I have uninstalled / re-installed Vista now about eight times for problems with installing drivers for USB devices (I've finally solved all these problems). After the last install the first program I installed was iTunes, tried video and it worked flawlessly. Then, each time I added a hardware device or program I would restart Vista and retry iTunes video.
    The first item I added was a USB thumb drive (as I had on all previous occasions to take advantage of Vista's 'Ready Boost'). The thumb drive is a 'Sony 2GB micro vault tiny', and meets the transfer speed requirements for 'Ready Boost', as soon as I had set the drive up for 'Ready Boost' I started having the same problems with iTunes video and Quicktime.
    Removed the thumb drive, restarted iTunes and had flawless video playback again. Have tried this over and over with the same result.
    So my question is, has anyone else had video playback problems with iTunes / Vista and found similar problems. Trying to tie down whether this is a compatability problem with 'Ready Boost' or the thumb drive used. I have also tried a Sandisk Titanium 2GB with the same result.
    I am not sure exactly how 'Ready Boost' works, I thought it added memory that was used to cache page files to the thumb drive instead of to the HDD making a faster seek /access time? Which should make things faster. Another article I read today was talking about 'Ready Boost' being an affordable extension to RAM, in this case I could understand the problem as I would think the access to a USB 2.0 thumbdrive would be slower than that to RAM.
    Any help appreciated, but I guess my bottom line is anytime I want to watch video on iTunes, I just pull the USB thumb drive .
    PC Pentium 4   Other OS   Windows Vista Home Premium

    I have the same stuttering video issues with iTunes and Vista. While I have used a thumb drive to transfer files (not Sony) I have not yet messed with Ready boost. I have seen several others complain about the video problem, perhaps they will chime in as well. Unfortunately, your solution doesn't work for me. I pretty much ignore iTunes, waiting for the next version (only god knows when it will be released).
    I do have an external firewire drive connected, I'll disconnect later today and see if that has any affect.

  • Power Mac G4 having video problems -green dots and pixelated lines

    Yesterday my Power Mac G4 running OS X (10.5.1) started having unusual video problems. I started to notice green dots on the screen where the mouse pointer had been or where application windows had recently been. The severity of the video symptoms seem to vary - from a cluster of green pixels to slight amount of fuzz in text.
    I'm thinking that this is a symptom of a problem with the video card starting to fail but I haven't ruled out the Apple Studio Display either. While the Mac was still under Apple Care support, I did have the video card replaced a few years ago due to symptoms that were much more severe than this.
    Should I get a new video card? Could it be the display at fault? How expensive would it be to take it in to the local Apple store for diagnosis/repair?
    ATI Radeon 9700 Pro:
    Chipset Model: ATY,R300
    Type: Display
    Bus: AGP
    Slot: SLOT-1
    VRAM (Total): 128 MB
    Vendor: ATI (0x1002)
    Device ID: 0x4e44
    Revision ID: 0x0000
    ROM Revision: 113-A06500-124
    Displays:
    Apple Studio Display:
    Display Type: LCD
    Resolution: 1280 x 1024
    Depth: 32-bit Color
    Core Image: Hardware Accelerated
    Main Display: Yes
    Mirror: Off
    Online: Yes
    Quartz Extreme: Supported
    Rotation: Supported
    Display Connector:
    Status: No display connected

    Installed a new video card (ATI Radeon 9600) along with the "Apple DVI to ADC Display Adapter" - seems to be fixed now! Thanks for the advice!
    ATI Radeon 9600:
    Chipset Model: ATY,RV351
    Type: Display
    Bus: AGP
    Slot: SLOT-1
    VRAM (Total): 256 MB
    Vendor: ATI (0x1002)
    Device ID: 0x4150
    Revision ID: 0x0000
    ROM Revision: 113-A73503-202
    Displays:
    Apple Studio Display:
    Display Type: LCD
    Resolution: 1280 x 1024
    Depth: 32-bit Color
    Core Image: Hardware Accelerated
    Main Display: Yes
    Mirror: Off
    Online: Yes
    Quartz Extreme: Supported
    Display Connector:
    Status: No display connected

  • HT3964 For the past several months my MacBook Pro has been shutting down. I get horrible video with marks and striations acress the laptop screen and an additional monitor and the weird video problems until the multilingual notice comes up saying to shut

    I used two monitors, and several months ago the MacBook Pro started crashing frequently. It seems like it might be overheating. Sometimes the disks seems to race. I leave the computer on most of the time and it sleeps when I am away, but when I come back in the morning it will have colored striations across both screens, and soon the multilingual announcement comes up that I have to press and hold down the power key.
    Also, when using a progam like Skype video, the video goes insane frequently, with Skype windows freezing, video freezing, Skype window cutting in half, and eventually the computer crashing.
    It seems to be a video problem.
    What do I do?

    I would take some screen shots of the anomalies and take the MBP to an Apple store genius bar.  I you cannot reproduce the display problems, the screen shots will at least give them a start point for an analysis.
    Ciao.

Maybe you are looking for