G5 mac wont boot up past white apple screen

My kids mac wont boot up past the white apple screen. I can here everything running but the monitor starts to get all static and scan lines with a reddish tint to it. I tried the commandoption+pr but it still wouldn't boot-up past the white apple screen. Not sure what else to do. Any help would be greatly appreciated. Thanks in advance

Hi there Peter,
Not cheap anyway you look at it sorry, professional Data Recovery being the most expensive.
Unfortunately, Disk Utility can't fix all that much, and the only other Apple Options are erasing the HD, or installing OSX to a second drive, then using Migration Assistant to move stuff over to the new HD.
If Disk Utility or fsck should fail to repair it, your best bet is DiskWarrior from Alsoft, you'll need the CD to boot from if you don't have another boot drive...
http://www.alsoft.com/DiskWarrior/
Your best bet is DiskWarrior, you need the CD/DVD though.
http://www.alsoft.com/DiskWarrior/
But others that may work…
Drive Genius 2…
http://www.prosofteng.com/products/drive_genius.php
TechTool Pro 4…
http://www.micromat.com/index.php?option=com_content&task=view&id=31&Itemid=83
Data Rescue II...
http://www.prosofteng.com/products/data_rescue.php
This one would require another HD with plenty of space to recover to.
You should use another Boot Disk or other Mac with this one in Target mode to do the recovery.
They have a free demo to see what it could recover.

Similar Messages

  • My i mac wont boot up past the start screen

    My imac wont boot up past the grey screen with the apple logo, the progress bar gets to about midway and stalls at this point.
    I even left the system on in this state for the remainder of the day to no avail.
    The original problem which resulted in the grey screen, was that when the system did boot up i had a black screen with only the task bar, however when the task bar tabs opened i could not get any of the options to actually operate/function. At this point i turned the system of and after the third attempt the system faltered to the grey screen.
    I have tried the Safe mode boot/nram/pra/smc rests but the system still stalls midway on the progress bar, even holding the c key.
    Help please....

    See if the computer will boot into the Recovery Partition (Command + R on startup) if it won't that means the HD has likely crashed and the ONLY thing to do is get it serviced.

  • My ipad wont boot up past the apple icon

    my ipad wont boot up past the apple icon

    Frozen or unresponsive iPad
    Resolve these most common issues:
        •    Display remains black or blank
        •    Touch screen not responding
        •    Application unexpectedly closes or freezes
    http://www.apple.com/support/ipad/assistant/ipad/
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

  • Mac won't boot, starts with white apple screen and spinning wheel. Also has grey loading bar which disappears after loaded then stays at white apple screen.

    Mac won't boot, starts with white apple screen and spinning wheel. Also has grey loading bar which disappears after loaded then stays at white apple screen.

    Hi cybertoof,
    Welcome to Apple Support Communities.
    It sounds like you're seeing a startup issue with your Mac, it's booting to a gray screen with an Apple logo. Try the suggestions in the article linked below, they will resolve most issues related to starting up your Mac.
    Mac OS X: Gray screen appears during startup
    http://support.apple.com/kb/TS2570
    I hope this helps.
    -Jason

  • I have been given a iphone3gs today and after restoring it to factory settings like i was adviced to, my phone now wont boot up past the apple logo, it will switch to black screen if i press both buttons. I havnt managed to sync it to itunes. how do i get

    I have been given a iphone3gs today and after restoring it to factory settings like i was adviced to, my phone now wont boot up past the apple logo, it will switch to black screen if i press both buttons. I havnt managed to sync it to itunes. how do i get it to work???

    Try to connect in recovery mode, explained in this article: iOS: Unable to update or restore

  • G5 wont boot past white Apple screen.

    To anybody that may have some advice. I hadn't used my power mac in about 4 days then when I turned it on last night it wouldn't boot past the white apple screen. I still have the chime my fans and processor still spin up. I tried resetting the SMU, and I also took out 3rd party ram I had installed and tried booting up to see if that was the problem. I'm prepared to take it to the apple store, I just thought somebody might have some advice before I take it there. So again when I boot up it reaches the white screen with the grey apple and then it just gives me the little grey spinning dial and just spins and spins. Thanks in advance to anybody with any advice.
    Dual 2.0 GHz Power mac G5   Mac OS X (10.4.8)  

    Well first I booted holding option and it just booted into target disk mode or something like it, a screen that would allow me boot from a different drive if I had one that was formatted with Tiger. So then I rebooted holding >shift and OPtion. And it kernel paniced, it said it didnt have the driver for this version Tiger 7,2 or something along those lines and then it gave me apples screen of death asking me to restart.

  • Macbook pro won't boot, stuck on white apple screen

    Noticed today, that my macbook pro won't boot . It gets to the white apple screen with the spinner under the apple logo. It stays like this for a long time without doing anything except spinning.
    I've powered down and tried to boot up several times.
    I have boot camp and windows on my mac and when the white screen appears, I can press Option to bring up which hard drive and the Windows partition will load without any problems.

    Exacty what happens when you try to boot up from the disc that came with your computer?  Are you holding down the c key?  Have you tried holding down the "option key?"  Are you able to run the Hardware Test - Intel-based Macs: Using Apple Hardware Test
    Shut down your computer and disconnect all peripherals (keyboard & mouse if pertinent) from your computer.  Now reboot.
    If the Mac starts up normally, shut it down again and then plug in one of the peripherals (keyboard or mouse first) and start up your computer again.  If it does so successfully repeat the process, adding one peripheral at a time until your Mac acts up.  At that point, disconnect the last peripheral you added, reboot your Mac and search the peripheral vendor's website for an updated driver. 
    If no driver exists or the problem remain after installing the new driver, try a different cable or a different port on your Mac.
    If none of the above works, again disconnect all peripherals from your Mac, hold down the "shift" key to start up in "Safe Boot" mode. 
    If the Mac starts up correctly, restart without pressing the "shift" key.
    If your computer still does not start up properly, shut it down and restart it while holding down the Apple+Option-P-R keys; keep holding "all 4 keys" down until you hear the startup sound "twice."
    If none of the above work Disconnect all peripherals from your computer. Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
    Select your language.
    Once on the desktop, select Utility in the menu bar.
    Select Disk Utility.
    Select the disk or volume in the list of disks and volumes, and then click First Aid.
    Click Repair Disk.
    (If Disk Utility cannot repair, you will need a stronger utility (3rd party) - Diskwarrior or Techtool PRO)
    Restart your computer when done.
    Repair permissions after you reach the desktop-http://docs.info.apple.com/article.html?artnum=25751 and restart your computer.
    Remove any 3rd party ram.
    Reinstall Lion - This will install a "fresh" copy of Lion without archiving old system files but leaves the rest of your files in place.
    If your computer is still under warranty or you have Apple Care, take full advantage of it by letting tech support deal with your problems.  It's what you're paying them for.
    Out of warranty - take the computer to an Apple store or an AASP.  Whichever is more convenient for you.

  • My iphone 3gs shut off and now wont make it past the apple screen i put it in recovery mode but when i do connect it to my itunes the phone will just shut off and keep going into recoveryt mode its really ******* me off please help!!!

    my iphone 3gs died and now it wont make it past the apple logo screen so i put it in recovery mode and hooked it up to my itunes on my home computer now it will say do you want to restore this iphone i click ok but then after it exctracts the software then starts to restore the screen goes black and it shuts off then 10 seconds later it turns back on it wont make it past extracting software please help me im getting really mad plaease help. it wont restore my phone and the error message 1611 come up i dont get it.. also the lock button on my iphone is broken and only works when i squeeze the topo of the iphone together so i cant put it in DFU mode

    Here is what you should do turn the device on hold the home button and the power button until the device turn off keep holding and when the device reboots release the power button but hol the home button until it shows the iTunes logo then restore it

  • Mac wont boot, stuck on white screen

    Hi
    After doing a software update and restart, my iMac wont boot. It will chime on, Grey screen w/ apple logo, then flashes to a white screen with a larger loading dial. It will keep doing this over and over, never actually getting to the login screen.
    Have done safe mode start-up, tried repairing disks, and reinstalling OSX, which it won't let me do.
    Not a computer expert so wondering if there are any more things I can try before taking it into get repaired?
    Thanks ahead of time!

    Try booting from the install disc. A quick search should pull up the precise method for your particular iMac. If this started happening after and update, then it is likely something corrupted in your system software that may be an easy fix.  Do you have an external backup drive you could boot from?

  • My macbook air wont boot up past the loading screen. UPDATE

    My 2008 macbook air will turn on, and then go to the apple screen with the loading wheel, but after a few minutes of loading it just shuts down...
    Here is an update of the problem after i messed around with it for a bit.
    I start up the macbook while holding Command+s
    Then it brings up the prompt.
    I then type: /sbin/fsck -fy
    It then outputs a message saying:
    disk0s2: I/0 error.
    Invalid sibling link
    (4, 42746)
    **The volume macintosh HD could not be repaired.
    /dev/rdisk0s2 (hfs) EXITED WITH SIGNAL 8
    After that, i type in: /sbin/mount -uw /
    Then I type: exit
    It runs the logout scripts and then immedietly boots up fine, like the computer has no problem.
    It works fine like this, but i dont want to have to do those steps every time I want to use my macbook...
    Any help on how to fix this?

    I have a similar problem. Not sure you're on here (since the post is really old) but did you manage to work it out? How?
    My thread:
    https://discussions.apple.com/message/19007548#19007548
    My Imac froze earlier today as I was dragging an image from safari into indesig and when it froze the weirdest pattern overlaid the screen. It looked just like the opacity pattern from photoshop with grey and white squares. I turned the computer off using the power button and unplugged everything.
    Now when I try to start it these weird lines appear on my start up screen (see link)...
    http://meijerladdaruppgrejer.wordpress.com/2012/07/24/oops/
    as you can see the apple and the wheel appears as normal...
    ... then it moves to a normal looking white screen (perhaps a bit greener than usual) and around 30 seconds later freezes at the blue screen.
    I've tried the cmd + alt + p + r several times but it won't help.
    If i press alt during start up I can see and choose my hard drive but just end up at the blue screen again.
    Can I try starting it up in safe mode or something?

  • Please help!  2.7 Power Mac froze, won't start up past white apple screen!

    Hello!
    I own a Dual processor 2.7 power mac G5. I only had safari and itunes running when everything came to a freeze without any kind of crash message. Upon force-shutting down the computer, the white screen with the gray apple came up, but would not move past this point! I also did not notice any sounds coming from my machine! I force-shutdown and started it up again and the same occurred. I left the room to jump on this computer (my old, trusty G3 iMac) to try and research while I let it try to start up. When I entered back into the room, I heard the fans going a pretty full-blaze with the white screen w/ apple still starring at me. So I shut it down and came here to post. If it is major issue, at this point, I just want all of my data to be safe. Can someone help me? Any ideas or suggestions? I am not thinking too clearly.

    Hi-
    Don't give up yet.
    There are a few things to try before hauling the machine in for diagnosis.
    What I think you should do now, is to follow all the steps (in order) as listed/described in this article:
    http://support.apple.com/kb/TS2570
    Even if you have tried before, please follow the order of troubleshooting.
    Each step helps to isolate the problem.
    Removing all but keyboard, mouse, and monitor is important.
    Try the Safe Mode boot, followed by resetting the PRAM.
    In lieu of repairing with Disk Utility, try and start to your DiskWarrior disk.
    Remember, booting to Disk warrior can take several minutes, so be patient.
    In the "Remove third-party RAM and internal hardware" step, try removing and reseating the RAM, and graphics card, attempting to boot after RAM, and again after graphics card.
    Instructions for removal and replacement are here:
    http://support.apple.com/kb/TA22565
    Also, it wouldn't hurt to try booting the G5 to firewire target disk mode.
    but I wonder what my G5 (the fans, in particular) would make of that interaction. hmm . . .
    The fans are just noisy. They will insure that overheat damage doesn't occur.
    If the firewire boot is successful, it may be wise to copy your files so that you can try a reinstall of the OS, should that be necessary.
    Also, again worst case, check for coolant leakage:
    http://www.fusina.net/G5coolantleaks/gallery.php
    http://www.xlr8yourmac.com/systems/G5coolantleaks.html

  • My iPhone wont turn on past the apple screen

    I was erasing it and it shut off but the battery was full. I've restarted it and it doesn't show up on itunes. The apple showes up then it turnes off.

    Probably won't work but... try resetting your iPhone by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings. You may need to hold the buttons as long as a minute.
    If that doesn't work, try Recovery or DFU mode... http://www.timog.com/forum/showthread.php?t=130265

  • My ipod touch wont turn on past the apple screen

    help how do i start this ipod up ?

    Try:                           
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • Mac Pro (early 2008) No chime, pixelated white apple screen

    My Mac Pro (early 2008) stopped working this morning. It was working fine yesterday, but did not start today.
    i Press the power button, and there is no chime. The fan whirls around and the cd disc drive makes a noise. The startup screen shows up with Pixelated black bars across the whole screen.
    this his stays onscreen, freezes for a few minutes, then restarts And continues the cycle of freezing and restarting.
    iI've tried to reset the smc and pram and that hasn't done anything.
    i've cleaned the inside of the computer, checked the RAM and graphics card, they seem to be in good working order.
    does anyone know what's wrong with it?

    Hi BDAqua
    i tried safe boot. The white apple screen still comes up pixelated but with a grey loading bar at the bottom. Once the bar has loaded fully, nothing happens. it stays frozen on that screen until I have to force it to shutdown by pressing and holding the power button on the front of the tower.
    i Tried holding the alt key. It brings up the devices, the screen is still pixelated. Pressing either one of the disk drives, didn't do anything new Unfortunately.
    https://mobile.twitter.com/SundeepToor/status/559966340883415040/photos
    hopefully you can see what my screen looks like in the link.

  • IBook wont boot up past gray screen

    my iBook wont boot up past the gray screen with the spinning wheel thing. the wheel will spin but wont go past the gray screen. if anybody knows whats wrong or how to fix it please let me know. i need my computer. and i have no time top take it into the apple store. thnx

    Hi, and welcome to Apple Discussions.
    Here are links to Apple Knowledge Base articles regarding startup problems:
    http://docs.info.apple.com/article.html?artnum=50959
    http://docs.info.apple.com/article.html?artnum=106464
    http://forums.osxfaq.com/viewtopic.php?t=7269
    I hope something there helps.

Maybe you are looking for

  • How to call a sql stored procedure in java...... HELP

    Hi I am making an application for taking backup in sql automatically so i have created a dts package which is called by a stored procedure. Now the problem is that how to call that stored procedure in a Java program so that after running my java prog

  • Why whenn I go to local files in Muse Export it does not load the pages in my browser?

    I was testing and tried to winzip the files to upload to a site (blackboard) but when I tested to view them straight from local files is not uploading in browser properly? Urgent, help please PS It does look wonderful from business catalyst site. Is

  • JTable not scrolling to end of data - Help!

    I have a jtable within a scrollpane. About 5 rows of the table are visible within the scrollpane at any given time. I add 80 records to the table, the scrollbar appears but I can only scroll to about the 15th row. My scrollpane is 468 x 250 My table

  • Can't get rid of unkown app

    Looked into login items under preferences and saw "Mac_SwapperDemon" in the startup items, which I don't remember installing or know how it got there, so I duly removed it by checking the tick box and clicking on the minus sign, rebooted and I though

  • Help - HDV tape import problem - Sony HC-3 broken - Questions/Warning

    My Sony HC-3 HD camcorder has just failed. I've had it just over 3 years. I really don't enjoy video editing much, and despite maybe shooting 20-30 tapes of HD footage of my young children, I'd only got round to importing a handful over Firewire, but