Gaining control Over Secor coloring in JFrchart DefaultPieDataset

I have the code blow and am abl to get the Pie chart in my jsp.
But i need to get control over the sector coloring
If anybody can shower som idea , it would be of great help
DefaultPieDataset pieDataset = new DefaultPieDataset();
pieDataset.setValue("Green", new Integer(70));
pieDataset.setValue("Red", new Integer(10));
pieDataset.setValue("Yellow", new Integer(20)); Regards,
Ivin

Similar Messages

Does anyone know how the cutout filter works and is there a way of achieving the same effect without using filters to get more control over final look?

does anyone know how the cutout filter works and is there a way of achieving the same effect without using filters to get more control over final look?

Several ways to get similar results. Image > Adjustments > Posturize with low values similar to what you'd use n Cutout. This is the most flexible way I can think of as you keep the image in RGB mode with layers intact. A more radical approach would be to reduce bit depth using Indexed Colour. You'll need to experiment with settings, try changing Forced to Primaries, and Matte to Foreground Color. There's no going back from this route, although you can change the mode back to RGB to re-enable layers, adjustment layers etc.
A nice thing about the Filter gallery filters is that you can change the layer to a Smart object with all the control that gives you.
Now if only this forum could filter out bizarre content.

Controlling Chart Bar Colors

Hello, I'm just beginning to add charts to my application and I'm finding it difficult to control Chart bar color dynamically. I would like Red, Yellow, Green bars based on limits on the Bar value. Example Values under 5 may be Green, 5 - 9 Yellow, and over 10 Red. The HTML chart appears to either be Random or one Specifc color, and the SVG Chart appears to only be a sinlge color. Both are chosen on the attribute screen of the chart.
Anyone done Dynamic Chart Bar coloring? - Thanks

Hi, and welcome!
Have a look at: [http://apex.oracle.com/pls/otn/f?p=44602:2]
To get this on a Flash Chart, I have:
1 - Set the chart type to: Stacked 2D Column
2 - Set the Color Scheme setting to: Custom
3 - Set the Custom Colors to: red,yellow,green
4 - Created THREE series (with a maximum of 15 rows each) with the following SQL statements:
Series 1:
SELECT NULL LINK, ENAME LABEL, CASE WHEN SAL < 1000 THEN SAL ELSE 0 END VALUE FROM EMP WHERE SAL IS NOT NULL ORDER BY ENAME
Series 2:
SELECT NULL LINK, ENAME LABEL, CASE WHEN SAL BETWEEN 1000 AND 2000 THEN SAL ELSE 0 END VALUE FROM EMP WHERE SAL IS NOT NULL ORDER BY ENAME
Series 3:
SELECT NULL LINK, ENAME LABEL, CASE WHEN SAL > 2000 THEN SAL ELSE 0 END VALUE FROM EMP WHERE SAL IS NOT NULL ORDER BY ENAME
As long as my SQL is correct and the SAL value ranges don't overlap, each ENAME entry will appear in one, and only one, series - for the other two series, the value will be reset to 0, so nothing is shown.
Andy

CIPC Automatic Gain Control

I am us CIPC 7.0. We are trying to use it in conjunction with Cisco Unified Video Advantage. Whe have purchased a Logitech USB Conference phone type device. FOr some reason while trying to tweek our volume controls, the Automatic Gain Control (AGC) of CIPC takes over the mic volume and rachets it up real high. By the software doing this, it is creating Aucustical Echo. I read about a bug in an older version of CIPC where you could kill AGC. Is there a way to do if for 7.0 versions and above?
Please help me out!

Nope - doesn't work. Clipped samples show up in "Amplitude Statistics" but when I go to the Diag panel - select "DeClipper" and "Scan" - NO problems are detected.

How to get more control over DVR recordings

Looking for some advice on how to make sure the DVR records (and keeps) the episodes I want.
An example:
I want to record a series that is still producing new episodes, but is also in repeats in syndication. For example, Big Bang Theory. This has new episodes each week on CBS, but has about twenty or so repeats each day on TBS.
Due to the high number of repeats, any new episodes pretty quickly get overwritten by the repeats. So is there a way to record both first-run and repeat episodes, but prevent the first-runs from getting overwritten before I can watch them?

GRubinstein1 wrote:
I have no idea if the format has recently been changed or what the issue is, but when I try to get more control over my DVR recordings, I can't. What I mean by that is that I cannot alter "First-Run and Repeats" to "First-Run Only," I cannot specify the specific channel to record on, I cannot say how many episodes I want it to keep, etc. Here is a step-by-step guide of what I do and what the problem is:
I press the "menu" button on the remote. I scroll down to DVR. I select the option of "manage series recordings." I select one of my shows. I'll use "Masters of Sex" as my example. I select "Masters of Sex." It's at this point where I get a problem. When I select "Masters of Sex," the only option I get is to cancel the series. No option to only record first-runs. No option to keep only 3 episodes instead of 5. No option to change it so it saves until I manually record it. Nothing. I've tried not selecting "Masters of Sex" and instead using the right arrow button to scrol over to the settings of the show. But nothing happens when I do that. It doesn't give me access to these options. This is incredibly frustrating because not only do the shows delete automatically at a certain point, but it records EVERY SINGLE AIRING OF EVERY SINGLE SHOW I RECORD. This means I have to go through several times a day to the "Scheduled Recordings" section and delete scheduled recordings of shows I have already seen. It's absolutely ridiculous, particularly for cable shows, which air episodes frequently throughout the week. Please help me if you can.
Put simply, I cannot change the settings on how I record each show.
Try the Box's Menu/customer support/tops support tools/Fix Fios TV option. (exact working may be different on your box)

Disable On-clip Gain Control

How do I disable the on-clip gain control for SELECTIONS?
Preferences only allows it to be toggled for NON-selection.
My work flow in editing a recorded lecture in Audition 2.0 was to left-click and drag a selection and with the button still down, hit the space bar to play from the beginning of the selection. This made life so easy in finding the correct starting word for a selection to be deleted. However, this feature is effectively removed in 3.0 because the selection cannot be played while the LMB is down. It seems to be because the on-clip gain control cannot be drawn/displayed and thus allow playback of the selection until the button is released. This defeats the purpose of being able to drag the selection to a new waveform modulation and play to see if it is the right word to include or exclude from the selection. That is, in 2.0 the selection was DYNAMIC during playback (I could change it WHILE it was being played). In 3.0 selections can't be played while continuing to adjust the selection in ONE mouse-drag action. Boo. Hiss.
So, I'm assuming that IF the on-clip gain can be totally disabled, then my habitualized 2.0 dynamic selection workflow would be applicable in 3.0. Since this doesn't appear to be an option in the prefs, is there an external hack/edit of some config file to do so?
Thanks.

Thanks. I figured as much, but you never know... maybe Adobe reads these forums and there's an actual human being that cares enough to add this to an update patch.
[edit]
Actually, I should have done a better search. A new one found this... http://forums.adobe.com/message/1983533#1983533 which "solves" the issue of the control being displayed in a selection, BUT, even when this View option is unchecked, the selection still will not play (via space bar) when the LMB is down, so it's not the refreshing/display of the on-clip gain control that's the problem, it must be an internal code change. DOUBLE BUGGER!
OK... time to add another request in the Features forum to get them to "bring back" the "old" way.

Re: More control over html tags needed

I have trying for a while to find an elegant solution to printing reports in such a way as to have headers and footers repeated on every printed page.
 
The two main solutions seem to be either using PDF (using FOP) or controlling the size of the regions anually (by hardcoding heights etc.). I am confident that with more control over the html tags (or the ability to place my own) around certain areas the problem could be solved very simply with CSS.
 
What I would like is a way to change the way that Apex treats table headers.
 
Presently it places the headers within a tbody tag and the uses th for every column. Ideally I would like to see this changes from tbody to thead. Given that the chances of this happening in the near future are minimal (not something that I am upset about as it would not be logical to change such things every time someone wants things to suite them better), I would like to be able to place a tag either before or after the tbody tag.
 
Something like:
 
div id="tableheaders"
 
If anyone knows how to do this your help will be greatly appreciated. Given that, printing repeated headings can be controlled relatively simply.

Hello Andrew,
I believe the following might be of help - placing <thead> and </thead> around headers
Regards,
Arie.

Acrobat 9: Control over font in text box

Versions: OS X 10.8.5 with Acrobat Pro 9, latest patch.
I am experimentally preparing a four day training course by adding my instructor information to a PDF of the slide show. There are only 850 slides, so it makes sense to experiment with this small document.
All is going well. I have created some custom stamps. Acrobat has only crashed twice, losing not more than two hours work as a result. I am optimistic I will be good to go in 10 more days.
I have just copied some test into a text box and it copied as black and blue text with a larger font than the standard red font that I have been seeing until now.
It occurs to me that this implies there may be some control over the text. I realize that Acrobat is not meant to be a document preparation tool, so I hunted around somewhat for a way to change the text box text to not-red, gave up and I have been putting up with it until now.
However, there are implications (but no clearly stated solutions) that there is a way to change the font, size and colour of text in text boxes.
Do you know how? I cannot work it out, nor can I find a solutoin. I can see that the Commenting preference pane offers Small Medium and Large text. There does not seem to be any other control other than the style (italic, bold, superscript, subscript) that is offered in the context menu.
Hints? Thoughts?

Pryanja.
Thanks again. If offers a dropdown for Colour, a box for style (plain, bold italic etc) and a button marked more, but they seem to do nothing at all. They don't change what I type, and they don't affect selected text. Looks to me tha they just take up some toolbar space.
Is it possible that it does not work on Mac?

How do I remove old web site when publishing new site with same URL in iweb? Hit replace when publishing new iweb site (so we could have control over changes) but new site name is attached to old via a / after our www address we want to keep.

I hit the replace when publishing the new iweb site (so we could have control over changes - last one was not an apple based site) but new site name is attached to old via a forward slash and underscore after our www address. Makes it very messy with a very long web address. Original address now followed by iweb site name followed by name of first page? Went for iweb as not that computer literate - all going so well?! Cheers for help in anticipation. Have to get off to work now but be great end to week if we could be sorted tonight. Rupes

Well yes of course, if you try and publish through iWeb there won't be an option to publish without your site folder which is exactly why I told you to download Cyberduck and use Cyberduck to upload your site to your server having published your site from iWeb to a local folder. That is what you need to do if you don't want your site name to be included in yoru url.
It would have been easier also if you had used Cyberduck initially to connect to your server and delete your old site yourself - at least that way you would have deleted the correct files rather than relying on your hosting service to do it and doing it incorrectly.
Download Cyberduck and then select the publish to a local folder option from iWeb and then use Cyberduck to upload your site to your server, but rather than uploading the whole site folder and separate index file, upload ONLY the contents of your site folder and then your url will be http://www.domain.com/page_name.html.
It really isn't rocket science!

Step by step Create a Desktop Administrator to have full and total control over desktops only

I have been trying to setup a Desktop Admin so that the group has full and total control over all desktops. I am using SCCM 2012 SP1. I have found very little documentation that explains in detail on how to set this up. I have read about role based access,
but found nothing that explains in detail how to setup an administrator that can do everything but only with desktop machines, not servers.

Hi John and Matthew,
Great link John, thank you for that. I did follow the instructions to a "T", but the Desktop Admin is still having problems. He is trying to image a new machine (so it is not in the collection yet). When he tries to import it by using the "Import
Computer Information Wizard", he gets to the "Choose Target Collection" tab, selects the "Browse" button, but cannot see any collections. I have verified (using the instructions that Matthew provided - thank you) that he is a "Full Administrator" for
the Desktop collections and folders where they are located.
Could you please tell me what I am missing?
Ken

Why do colors come over as Color Book swatches when I copy and paste to a new document?

Why do colors come over as Color Book swatches when I copy and paste to a new document? Original document has CMYK spot color swatches. I copy them and paste them in new document and it gets converted to a Color Book swatch. Why?

Check the spot color options of that document.
It's in the swatches panel's menu.

When I copy and paste a chapter from MS Word into Pages my tables and equations are trashed. But importing them results in no control over my template How do I get my chapter into my template without copying

When I copy and paste a chapter from MS Word into Pages my tables and equations are trashed. But importing them results in no control over my template How do I get my chapter into my template without copying?

Try just Opening the Word .doc from within Pages and see if that gets closer to what you want, then copy the chapter you want from the Pages version.
Peter

HT1386 How do I copy music from an old iPod? Why do you have to make things so difficult? These are my files that I paid for but once I put them on your devices, I no longer have control over them. I've wasted so much time on these stupid problems.

How do I copy music from an old iPod? Why do you have to make things so difficult? These are my files that I paid for but once I put them on your devices, I no longer have control over them. I've wasted so much time on these stupid problems. I used to be able to do this until you "improved" things.

Thanks, Deggie. I thought Apple would see my feedback. I would just like to know if there is a simple way to copy just a few music files from an old iPod. I saw instructions on how to copy all of them from the iPod but it was complicated and I really didn't want to copy all the songs. I guess I could delete all the songs but the ones I want to copy then go through that process again. Do you know how to back up music to my computer? I don't want to have to go through this again and possibly lose music.

Deskjet 1010 over saturated colors

This is my first HP printer. I have had it only a few days and am very disappointed with prints from my photographs.
The prints have over saturated colors and are too warm, resulting in a dark, muddy appearance.
For mant years, I have used Canon printers that have allowed me to adjust color balance and density.
I was surprised to that these facilities are not available with HP software.
Is there any way I can get the print quality that I want?

HI , Welcome to the HP Support Forums! I see that you're experiencing quality issues, while printing photos on your HP Deskjet 1010 Printer. I would like to assist you with this. Due to the nature of the issue, I may require more information. What operating system are you using? How to Find the Windows Edition and Version on Your Computer.What operating system are you using? Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer? To see if the correct driver is installed please try: Please download and run the Print and Scan Doctor, it will likely diagnose and resolve the issue you are experiencing. Please let me know the results of the steps I have recommended. Note: The Print and Scan Doctor is for Windows Operating Systems. Do colour prints look good on regular paper?
What type of paper are you using when you're printing photos? Did you specify the Paper Type when printing, in the print settings? Note: If you aren't using HP Photo Paper, select Other Photo Paper. The printer is programmed to know HP Paper, the speed and saturation of the Ink will depend on the type of paper you're using. Therefore, if you're using none HP Paper, and the print settings are set for HP Photo Paper, you will see these results. Printing Photos- Manual Load photo paper1. Make sure the output tray is open.2. IMPORTANT: Remove all paper from the paper input tray, and then load the photo paper with side to be printed on facing up. To print a photo on photo paper1. On the File menu in your software, click Print.2.Make sure your printer is selected.3. Click the button that opens the Properties dialog box. Depending on your software application, this button might be called Properties, Options, Printer Setup, Printer Properties, Printer, or Preferences.4. Select the appropriate options.● On the Layout tab, select Portrait or Landscape orientation.● On the Paper/Quality tab, select the appropriate paper type and print quality from the Media drop-down list.● Click Advanced to select the appropriate paper size from the Paper Size drop-down list. NOTE: For maximum dpi resolution, go to the Paper/Quality tab and select Photo Paper,Best Quality from the Media drop-down list. Then go to the Advanced tab and select Yes from the Print in Max DPI drop-down list. If you want to print Max DPI in grayscale, select High Quality Grayscale from the Print in Grayscale drop-down list.5. Click OK to return to the Properties dialog box.6. Click OK, and then click Print or OK in the Print dialog box. NOTE: After the printing is finished, remove unused photo paper from the input tray. Store the photo paper so it does not start to curl, which could reduce the quality of your printout I would try the steps within this guide, Fixing Print Quality Problems. If you need further assistance, please let me know the following information above. Please respond to this post with the result of your troubleshooting. I look forward to hearing from you. Good Luck!

How do I gain control....

How do I gain control of my F14 and F15 keys on the keyboarde of my G5? Right now they are taken up by brightness and dimming controls that are redundant since I have those on the monitor itself (Apple 23) and badly need those to assign functions in some of my apps. Can't seem to find a spot in the System Preferences where I can disable these.

There is no way. I asked this question months ago and got no answers.
The only thing that came close was an app called Mac Pilot that is supposed to make it possible to change lots of hidden settings. I sent them an email and they said it could do it but I never got around to trying it.
I did some Google searching and someone had a way to do it with some complex Terminal operation but I didn't want to deal with it.
I have Quickeys set up to perform all kinds of things on my Mac and have long ago run out of easy keystrokes and would like those free as well.
Kevin

Gaining control Over Secor coloring in JFrchart DefaultPieDataset

Similar Messages

Maybe you are looking for