Garageband X, master reverb and echo

I've recently got the new garageband X. I am a bit confused about how to adjust the master reverb and echo, I have the global setting activated in preferences, and can see the echo and reverb sends on individual tracks which adjust the amount of reverb and echo added, but where are the settings that edit the type of echo and reverb added?

Just a suggestion, but you might get better replies if you post in the appropriate Garageband forum where the GB gurus hang out!
http://discussions.apple.com/category.jspa?categoryID=127

Similar Messages

  • I can't figure out why my reverb and echo things are greyed out

    I can't figure out why my reverb and echo things are greyed out on the bottom right of my screen with the edit tab open for the track. I was going to put a screenshot in here but I couldn't figure it out. I one can understand what I mean. Thank you.

    bennirubber wrote:
    reverb and echo things are greyed out on the bottom right of my screen
    http://www.bulletsandbones.com/GB/GBFAQ.html#effectsdisabled
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • Garageband adding effects like reverb and echo

    Here is the deal. I want to add effects on a specific parts of a track. Now I can select a part of a track but it seems it only allows to edit these parts through the scissorbutton on the down left part of the programm. If I change the reverb on the right, this changes the reverb of the whole track, not just the selected area.
    Is is even possible to change the reverb or echo of selections within a track? Is there a way to make these adjustments?
    Dragging the selections to another track doesn't seem to work either. And I have to edit many little pieces.

    Just a suggestion, but you might get better replies if you post in the appropriate Garageband forum where the GB gurus hang out!
    http://discussions.apple.com/category.jspa?categoryID=127

  • Reverb and echo send's ?

    Hey all , wondering how the send feature works for the reverb & echo.  2 Wks. ago I learned how the automation works & now it's on to this.
    Any help would be great.
    Thanks , Jim.

    If you are refering to the Global Echo and Global Reverb, DON'T USE THEM.
    They are only there for compatibility reasons with older GarageBand Projects.
    In GarageBand X, you cannot change the paramters anymore (only adjust the send level). Also, these parameters are not saved with the new Patch (in case you use that cool feature to build your own settings).
    Hope that helps
    Edgar Rothermich
    http://DingDingMusic.com/Manuals/
    'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

  • X-Fi Midi Synth Reverb and Chorus Controller Is

    I bought an X-Fi a couple of weeks ago, and I soon realized that midi effects controllers cc9 and cc93 (reverb and chorus) didn't work with the X-Fi hardware synths. I called CL Technical support about this and this is the response I got:
    "I have spoken with our testers who say that the CC9-Reverb and CC93-Chorus amounts are set in theSF2 file. That value is typically set to hit 20% at maximum CC data entry (27). To work aroundthis, you will need to use NRPNs to set the amount to a greater level, or edit the SF2 contentitself. Please let me know if this information hel
    ps.
    No, it doesn't help, reverb and chorus effects in midi files are set with midi controllers #9 and #93, this is true of virtually every midi file available on the internet, including commercial midi files. CL's testers are wrong. SF2 files have embedded minimum amounts of reverb and chorus for certain patches, midi song files customize the amounts of reverb and chorus with controllers cc9 and cc93 to suit each particular song, and even change it during the song. Adding NRPN's involves editing the midi file by calculating the MSB and LSB for each desired value and adding four controllers for every channel of every song every time you want a change in the effects. Controller cc9 and cc93 have control sliders or knobs in every major audio/midi multitrack program and these require no editing. A midi synth that ignores this loses much of its realism, and this just isn't acceptable for those of us who make serious use of midi song files. I have several thousand midi files and it would take months or even years to edit them all. This is a bug that may only affect a small percentage of X-Fi users, but for those it affects, it's a major bug. From the response I received from tech support, it appears that they aren't planning to do anything about it, so I thought I would publicize the issue here and see if I can't change their minds. I drove a 20 mile round trip and paid $40 for my X-Fi and I've had to pull it out of my computer and put my Audigy back in. I'm not a happy camper at this point, but if CL is going to fix the issue, I'm willing to wait for a while because I think thye X-Fi is worth it.

    mriev wrote:
    Maxing everything was the first thing I tried, and no go. Still so little reverb it was hard to tell if it was working, and no detectable chorus. I even went back with Vienna 2.4 and checked my soundfont again, and all was as it should be.
    Putting together a brand new sound card is a major undertaking and it's understandable if something gets missed here and there, especially as most of the designers and testers probably aren't serious musicians. It's easy to see how this one could slip past, especially if they were using Soundfonts that have reverb and chorus programmed in to some of the instruments. Everything works fine until you start varying cc9 and cc92 and nothing happens. I haven't checked because I removed the X-Fi and put my Audigy back in, but it's a good bet that none of the midi effect controllers work properly. This is a relati'vely minor issue for most users, but for serious musicians who use midi, it's major. However, I'm sure CL will fix the problem as soon as possible. I just hope it doesn't take too long because the X-Fi is a really, really good sounding card, except for this one problem.
    Gi've the X-Fi another try. I had these same issues at first but now cc9 and cc92 work in Sonar4.
    These controls work, its just that the reverb is very low and the chorus has to be activated. In the effect editor choose the amphitheater preset as oppose to the default for reverb as it is the most audible.
    follow these steps:
    . choose creation mode
    2. enable EAX effects and set to max
    3. select amphitheater preset for reverb
    4. activate the 5 bus buttons for chorus in master aux effects box (Front L\R, ect)
    step 4 should work best for stereo setup
    This should do it.

  • Need to remove reverb/slight echo from source audio

    Hello all:
    And yes, yes, before I get the sanctimonious wiseguy quips about "should have recorded it right in the first place/can't get there from here" and other generally unhelpful remarks and platitudes.... "I KNOW ALREADY!"
    So down to the subject at hand. I have to edit source video that was recorded in a very live room. The sound guy did his best to kill the reverb with baffles and sound blankets. etc. but some reverb/slight echo remain. Does anyone know of a software application that can at least smooth it out or advise on how to EQ it so the ring is not so noticeable?
    Many thanks
    AS
    Message was edited by: Adrian Smith4
    Message was edited by: Adrian Smith4

    Thanks for all the responses. I've actually fixed it using a combination of eq and a super sensitive noisegate filter. It was pain to do but got the job done. Phew. < </div>
    I'm trying to figure out a response to this that would equal your original's presupposition but the best I can do is say thanks for offering up a helpful contribution to the "remove reverb" discussions. Future searches will find your thread and maybe you have given them some hope.
    Numerous threads on the same topic often end in frustration because, literally, nothing can be done to reduce echoic reverberation because the overlapping sounds are picked up by a single microphone.
    bogiesan

  • DI API to import fixed  asset master data and acquisition.

    Hi,
    Environment : SAP B1 8.8 PL18 & Fixed Assets Add-on 880.236.00.18
    Have been used to add fixed assets, and would like to perform using the API to import fixed  asset master data and acquisition.
    The commands to access the table of fixed assets related to the API that is available?
    Thanks.

    I have the same problem...
    Is there anyone who have tried these things?

  • Diff B/W master data and transaction data

    Hi all,
    What is the main Diff B/W master data and transaction data.  give me some example ?
    Thanks in Advance
    Krish...

    hi krish,
    MASTER Data is the data that exists in the organization like employee details, material master, customer master, vendor master etc. These are generally created once.
    Master data are distributed throughout the company, they are often not standardised and often redundant. As a result it is very costly to offer efficient customer service, keep track of supply chains and make strategic decisions. With SAP Master Data Management (SAP MDM) these important business data from across the company can be brought together, harmonised and made accessible to all staff and business partners. As a key component of SAP NetWeaver, SAP MDM ensures data integrity via all IT systems.
    Regardless of the industry, companies often work with different ERP and Legacy systems. The result: the business processes are based on information about customers, partners and products which is displayed in different ways in the systems. If the data are recorded manually, there are more inconsistencies: some data sets are entered several times, others cannot be retrieved by all divisions of the company.
    As corporate applications are becoming increasingly complex and produce ever greater amounts of data, the problem is intensified further. Nevertheless, your employees must work with the inconsistent data and make decisions on this basis. The lack of standardised master data easily leads to wrong decisions, which restrict efficiency and threaten customer satisfaction and profitability.
    In a word: in order to save costs and ensure your company’s success it is necessary to consolidate master data about customers, partners and products, make them available to all employees beyond system boundaries and use attributes valid company-wide for the purpose of description.
    TRASNACTION Data - These are the business documents that you create using the master data - Purchase orders, sales orders etc
    http://help.sap.com/saphelp_nw2004s/helpdata/en/9d/193e4045796913e10000000a1550b0/content.htm
    Regards,
    GNK.

  • I have GarageBand for iPad 2 and noticed that there are far fewer loops for iPad than for apple laptops. Is there a library available of apple loops? I haven't been able to find any if there are. Any help would be greatly appreciated.

    I have GarageBand for iPad 2 and noticed that there are far fewer loops for iPad than for apple laptops. Is there a library available of apple loops? I haven't been able to find any if there are. Any help would be greatly appreciated.

    Update: An Apple rep called me today to update the status of my return. I was told that the replacements for the BLACK iPad 2's was still another 3 weeks out (at least) so they offered me a brand new WHITE 16GB iPad 2. I could have that or continue waiting. I opted to go ahead and accept the offer of a new white one. Worst case scenario if I don't like the white one I have buddy that just bought a 16GB black one that he would be willing to swap it.

  • Adding new elements to a Master Page and sharing them to existing pages

    I need to include new navigation elements on the master page
    and I want it to show up on pages I've already created. I've added
    the new elements on a layer of their own which is part of the
    master page, but the Share Layer to Pages... option is dimmed.

    jcbluesman wrote:
    > I'm using CS4, Jim, and here's a link to the .png
    > (
    http://idisk.mac.com/jconstant-Public/deimos.png
    >
    > The 3 tabs in the upper right on the master page are the
    ones I'm trying to
    > share across the existing pages. I created them in PS
    (also CS4), then imported
    > the .psd into this FW document, if that makes any
    difference.
    >
    > Thanks,
    > Jim
    >
    OK there are two related as I see it.
    Each of your pages consists of a solid, opaque bitmap for a
    main image.
    Master Pages, by default, are at the bottom of the layer
    stack. Your
    tabs ARE present, you just can't see them because they are
    covered up by
    the bitmap.
    Assuming you don't have those page images as multi-object
    elements,
    where you can edit the blue backgrounds, there are still two
    things you
    can do, both of which are pretty easy.
    Go into each page and temporarily reduce the opacity of Layer
    1.
    Use the marquee tool to draw a selection around the area of
    the tabs.
    Delete the selection.
    Return the lay back to full opacity.
    OR
    Try dragging the Master page to the top of the layer stack in
    each page.
    Hide or delete the Master page background.
    This option is a little trickier, but I was able to do it.
    Wait for the
    black bar to appear before you release the mouse. You may
    need to try
    this a few times before it works.
    HTH
    Jim Babbage - .:Community MX:. & .:Adobe Community
    Expert:.
    http://www.communityMX.com/
    CommunityMX - Free Resources:
    http://www.communitymx.com/free.cfm
    .:Adobe Community Expert for Fireworks:.
    Adobe Community Expert
    http://tinyurl.com/2a7dyp
    .:Author:.
    Lynda.com -
    http://movielibrary.lynda.com/authors/author/?aid=188
    Peachpit Press -
    http://www.peachpit.com/authors/bio.aspx?a=d98ed798-5ef0-45a8-a70d-4b35fa14c9a4
    Layers Magazine -
    http://www.layersmagazine.com/author/jim-babbage

  • HT5622 Hi, can you help me for my payment account? It's always show " Your payment method was declined..." How can I fix it? There's only 3 to choose fpr Visa, Master Card and Amex.. But doesn't have "None".. I can't download any apps from app store :(

    Hi, can you help me for my payment account? It's always show " Your payment method was declined..." How can I fix it? There's only 3 to choose fpr Visa, Master Card and Amex.. But doesn't have "None".. I can't download any apps from app store

    http://support.apple.com/kb/ht1918

  • Downloding the SAP master data and transaction data to a flat file

    Hello All,
    Is there any SAP standard method or transaction to download the SAP master data and transaction data to flat file.
    With out using ABAP development, SAP had provided any tool or method to download the SAP system master and transaction data to flat file.
    Thanks,
    Feroz.

    hi
    as of now up to my knowledge no.

  • My iphone 5 went into search mode and I can't place or receive calls or use the internet but my text messages work. Sprint had me do a master reset and my phone doesn't work at all now I can't get it past the activation. Will I have to pay in store?

    My iphone 5 went into search mode and I can't place or receive calls or use the internet but my text messages work. Sprint had me do a master reset and my phone doesn't work at all now I can't get it past the activation. Will I have to pay for repairs in store because I didnt get the Apple care plan when I purchased it. Sprint said it may be a phone problem not sure if I should take it to Sprint or Apple...I just need my phone

    I'm sorry to learn that you are not able to make/receive calls chelseabee! (ticket number removed) results indicate that there is no issues with the network or account provisioning. Since you have already done a hard reset http://vz.to/1gBkSJc (as per your post), I recommend exploring replacement options. If your phone is within the one year manufacturers' warranty we can provide a Certified Like New replacement http://vz.to/uyYF0o as long as no physical/liquid damage exist. If your phone has sustained physical/water damage and you have insurance, you can submit a claim to the insurance company online at this link http://bit.ly/07CrqPK
    AntonioC_VZW Follow us on Twitter at www.twitter.com/VZWSupport
    >> Edited to comply with the Verizon Wireless Terms of Service <<
    Edited by:  Verizon Moderator

  • SAP BPC 7.5: Master Data and Hierachiy Load from InfoObject

    Hallo Forum Participants,
    I am going to load Master Data from a "Clarity" Reporting Tool in BW to SAP BPC 7.5 via Process Chains (/CPMB/IMPORT_IOBJ_MASTER, /CPMB/IMPORT_IOBJ_HIER) delivered from SAP.
    These Process Chains load the Master Data and Hierarchies from an InfoObject. To find out more about Ticking of BPC I have performed a following test. So, on BPC Admin Interface I have duplicated the Dimension u201CAu201D and called it as Dimension u201CBu201D (in BW site InfoObject u201CAu201D and u201CBu201D). In the Member Sheet of Dimension u201CBu201D I have implemented the several changes und tried to load Master Data from BW namely from infoObject u201CBu201D into BPC Dimension u201CAu201D. Therefor I created a transformation file and mapped one for one IDu2019s. The data Manager started these chains, but resulted nothing (Status: red X).
    What are the features of BPC InfoObjects in Comparision with regular InfoObject?
    How can I load Hierarchies into InfoObject?
    What else I must take into account?
    Why does not work this simple test?
    Regards.
    Alisher
    Edited by: Alisher Babaev on Jan 6, 2012 1:59 PM

    Hallo pkrishna,
    so it is successed with master data load, but without hierachiies.
    My Master Data Properties on Dimension Sheet are:
    -ID
    -EVDESCRIPTION
    -PARENTH1
    -CURRENCY
    I have mapped as below:
    ID=ID
    CURRENCY=/CPMB/CURR
    /CPMB/CURR- my technical id in BW.
    In the Note you advised transformation file has been mapped like below:
    -NODENAME=NODENAME
    -HIER_NAME=HIER_NAME
    -PARENT=PARENT
    -ORDER=ORDER
    After executing of package i get whether rejected list or log file. No data can be retirieved from InfoObject.
    Have you any Idea?
    regards

  • What are the settings master data and transaction data from r/3 to in APO.

    Hi all,
    Can u suggest me ,I need to conform in apo what are the setting when transfering master data and transaction data from r/3 to APO.
    frm
    babu

    Hi
    The data get transfered from R3 to APO via CIF which is SAP standard.
    Please find enclosed herewith the link which will provide you detail information regarding it.
    http://help.sap.com/saphelp_scm41/helpdata/en/9b/954d3baf755b67e10000000a114084/frameset.htm
    Please let us know if it helps you. Please also let us know if you have any more specific question.
    Thanks
    Amol

Maybe you are looking for