GC: meaning / interpreting the log messages of -verbose:gc / PrintGCDetails

Hello,
i have a webapp running in tomcat 4 and at some point in time the whole app starts running very slow. after some debugging and experiencing with VM settings, especial GC logging settings i saw that the consumed memory from NewGen is never free'd, and, if i understand correct, is not copy'd to OldGen. Are the new objects allocated in OldGen? The GC there is able to free memory everytime GC runs, but the time for that collection is very long, and i think the reason why our app runs so slow ...
Can anybody explain me the behaviour of the VM? (Java version: 1.4.2_06)
33249.940: [GC 33249.940: [DefNew: 409599K->409599K(460800K), 0.0000420 secs]33249.940: [Tenured: 192446K->193182K(409600K), 1.2274960 secs] 602046K->193182K(870400K), 1.2276930 secs]
33252.139: [GC 33252.139: [DefNew: 409599K->409599K(460800K), 0.0000430 secs]33252.139: [Tenured: 193182K->193633K(409600K), 1.5801410 secs] 602782K->193633K(870400K), 1.5803400 secs]
33255.535: [GC 33255.535: [DefNew: 409593K->409593K(460800K), 0.0000370 secs]33255.535: [Tenured: 193633K->191216K(409600K), 2.1173670 secs] 603226K->191216K(870400K), 2.1175360 secs]
33258.457: [GC 33258.457: [DefNew: 409599K->409599K(460800K), 0.0000400 secs]33258.457: [Tenured: 191216K->192107K(409600K), 1.1388990 secs] 600816K->192107K(870400K), 1.1390530 secs]
thx, Chris

Hi Chris
Refer this you will know .,
http://java.sun.com/docs/hotspot/gc1.4.2/example.html
-Krish

Similar Messages

GC: interpreting the log messages using -verbose:gc and PrintGCDetails

Hello,
i have a webapp running in tomcat 4 and at some point in time the whole app starts running very slow. after some debugging and experiencing with VM settings, especial GC logging settings i saw that the consumed memory from NewGen is never free'd, and, if i understand correct, is not copy'd to OldGen. Are the new objects allocated in OldGen? The GC there is able to free memory everytime GC runs, but the time for that collection is very long, and i think the reason why our app runs so slow ...
Can anybody explain me the behaviour of the VM? (Java version: 1.4.2_06)
33249.940: [GC 33249.940: [DefNew: 409599K->409599K(460800K), 0.0000420 secs]33249.940: [Tenured: 192446K->193182K(409600K), 1.2274960 secs] 602046K->193182K(870400K), 1.2276930 secs]
33252.139: [GC 33252.139: [DefNew: 409599K->409599K(460800K), 0.0000430 secs]33252.139: [Tenured: 193182K->193633K(409600K), 1.5801410 secs] 602782K->193633K(870400K), 1.5803400 secs]
33255.535: [GC 33255.535: [DefNew: 409593K->409593K(460800K), 0.0000370 secs]33255.535: [Tenured: 193633K->191216K(409600K), 2.1173670 secs] 603226K->191216K(870400K), 2.1175360 secs]
33258.457: [GC 33258.457: [DefNew: 409599K->409599K(460800K), 0.0000400 secs]33258.457: [Tenured: 191216K->192107K(409600K), 1.1388990 secs] 600816K->192107K(870400K), 1.1390530 secs]
thx, Chris

Hi Chris
Refer this you will know .,
http://java.sun.com/docs/hotspot/gc1.4.2/example.html
-Krish

What means is the log message? Thanks

Hi, everyone:
I have installed the Database 10g and Database Companion under the RedHat Linux ES3 successful.
But after start the Apache server using the command
opmnctl startall
there are very many log message
...(date time)... [4] Local connection 0,127.0.0.1,6100 missing form factor
are written to the log file opmn/logs/ons.log.
What means is the log message and how I correct the error?
Thank you very much!

IT 267 is the Additional Offcycle Payments. For Example Bonus/ Car Allowance / Re-imbursement etc. as you configure in your system. In Off cycle workbench (TCODE = PUOC_10), when you are executing the Payroll for "Additional Payment", we can also see IT0267.
For Log, select "Display Log" in the program RPCALCU0(US payroll). You can run payroll in the SIM mode and see the log.
For Offcycle, I think you need to look at the Payroll result table (TCODE = pc_payresult) and check the cluster table for the Pay Period.
Hope this helps !

What Does The Log Message "Rejecting update: Lease..." Mean?

I use RelicatedCache and TransactionMap on Coherence 3.4.2.
I saw "Rejecting update: Lease..." message.
What does the log message mean?
2011/10/18 06:41:57.506 [DEBUG] Logger@9263394 3.4.2/411p16 N/A NOAH Coherence 3.4.2/411p16 [D4] (thread=ReplicatedCache, member=2): Rejecting update: Lease: [-8863526970089418959, -2793231267399579492, R] (Cache=issue-code, Size=Unknown, Version=0/0, IssuerId=1, HolderId=0, Status=LEASE_AVAILABLE, Last locked at Thu Jan 01 09:00:00 JST 1970)
by member=2, Lease: [-8863526970089418959, -2793231267399579492, R] (Cache=issue-code, Size=143, Version=0/0, IssuerId=2, HolderId=0, Status=LEASE_AVAILABLE, Last locked at Tue Oct 18 06:41:51 JST 2011)
I found a Note 1065352.1, but the message is little differnt...
Note 1065352.1
"What Does The Log Message "Rejected update: Lease..." Mean?"I'd like to know following 2 points..
- What does "Rejecting update: Lease..." message mean?
Do thsese messages have same meaning?
- My application didn't catch any exceptions, and
"CacheFactory.commitTransactionCollection" returned true.
So this "Rejecting update: Lease..." is not a error message, right?
(Does the transaction commited successfully?)
Thanks in advance.
-Noriyuki

Hi
These are decoded results of the error message which u have recd in ur box..
%C4K_PKTPROCESSING-4-ERRORPACKET: [char]
The software is unable to process a packet; the packets have been forwarded to the CPU instead and the packet will be dropped.
Recommended Action: This is an informational message only. No action is required.
%C4K_HWACLMAN-4-WARNINGSTRING: [char]
A nonspecific warning message was displayed.
Recommended Action: See the message string [char] for more information.
Related documents- No specific documents apply to this error message
%C4K_HWACLMAN-4-WARNINGSTRING: [char]
A nonspecific warning message was displayed.
Recommended Action: See the message string [char] for more information.
Related documents- No specific documents apply to this error message.
regds

Redock the log/message window in it's orginial place at the bottom?

How do I re-dock the log/message window in it's orginal place at the bottom? When ever I try re-docking it goes to the left side of the screen. I can drag and float the window back done to the bottom but I would prefer for it to go back to it's orginal position. I've located the windowinglayout.xml file but not really sure what I should change.
JDeveloper: 10.1.3.3
Thanks

Ok if I'm following you correctly I dragged the undocked Message-log window down to the bottom of the code editor. The dragged window is violet/purple color with the following verbiage "Use Ctrl key to prevent docking Use Esc key to cancel ". I let go of the window and it is now floating there. I want it to dock instead of float at this location. What exactly is the drop indicator?
Thanks,
Russ

JNI Hotspot Error: Access Violation, need help interpreting the log.

Hello. I'm a relatively new developer (previously an engineer), and so to start me off I was given the task of providing a JNI-enabled interface to some legacy licensing software (it's C++, we want Java). Now the functionality of JNI is not the problem I have. I HAD those types of problems but now I'm having a far more obscure problem that is absolutely stumping me.
It's a Hotspot error that I cannot get rid off... and I cannot find a clear bit of info on how to interpret them.
About the problem...first off this does not happen on my development machine, where it is isolated from other components in the end-product. The integration machine with the rest of the software runs fine with a "Dummy" version of my component, but we get errors when the real version is in use. I'd really appreciate any help in understanding these things, even if it is just some general pointers.
First off here is the log
# An unexpected error has been detected by HotSpot Virtual Machine:
# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x7c82caa4, pid=5516, tid=4420
# Java VM: Java HotSpot(TM) Client VM (1.5.0_14-b03 mixed mode)
# Problematic frame:
# C [ntdll.dll+0x2caa4]
--------------- T H R E A D ---------------
Current thread (0x0aa1eaa0): JavaThread "btpool0-5" [_thread_in_native, id=4420]
siginfo: ExceptionCode=0xc0000005, reading address 0x00000004
Registers:
EAX=0x0b1a9a40, EBX=0x00030000, ECX=0x00001448, EDX=0x00000000
ESP=0x0c90e774, EBP=0x0c90e780, ESI=0x0b1a9a38, EDI=0x0b1aa000
EIP=0x7c82caa4, EFLAGS=0x00010246
Top of Stack: (sp=0x0c90e774)
0x0c90e774:   00030000 00000003 00030005 0c90e7b8
0x0c90e784:   7c833a2a 0b1a9a4c 0b1aa000 0c90e7ac
0x0c90e794:   00000000 00000477 00030178 00030000
0x0c90e7a4:   0ab2de05 0003015c 00000600 0afd0000
0x0c90e7b4:   00030178 0c90e9e4 7c82b5fb 04030000
0x0c90e7c4:   000023b8 000023ac 00000000 7c829fd6
0x0c90e7d4:   7c82a124 00031138 0c90ea04 7c82a0b8
0x0c90e7e4:   7c82a0fc 000001ba 00000000 7c829fd6
Instructions: (pc=0x7c82caa4)
0x7c82ca94:   63 02 00 8b 4e 0c 8d 46 08 8b 10 89 4d 08 8b 09
0x7c82caa4:   3b 4a 04 89 55 0c 0f 85 ae 4f 01 00 3b c8 0f 85
Stack: [0x0c8d0000,0x0c910000), sp=0x0c90e774, free space=249k
Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
C [ntdll.dll+0x2caa4]
C [ntdll.dll+0x33a2a]
C [ntdll.dll+0x2b5fb]
C [MSVCRT.dll+0x1d08c]
C [verify.dll+0x4897]
C [verify.dll+0x19c6]
C [verify.dll+0x126b]
C [java.dll+0x3fb7]
V [jvm.dll+0x11d86a]
V [jvm.dll+0x78acb]
V [jvm.dll+0x78deb]
V [jvm.dll+0x78aaa]
V [jvm.dll+0xcb029]
V [jvm.dll+0xcbcc6]
V [jvm.dll+0xcbbac]
V [jvm.dll+0x82c7b]
j com.a.b.c.lmv.Factoralproducer.MeanManagerImpl.subscribe
(Lorg/xmlbp/schemas/ws/_2003/_03/addressing/EndpcntReferenceType;
Lcom/a/b/c/lmv/baseFactoral/TopicExpressionType;Ljava/lang/Boolean;
Lorg/oasis_open/docs/wsrf/_2004/_06/wsrf_ws_resourceproperties_1_2_draft_01/QueryExpressionType;
Lorg/oasis_open/docs/
wsrf/_2004/_06/wsrf_ws_resourceproperties_1_2_draft_01/QueryExpressionType;
Lcom/a/b/c/lmv/Factoralproducer/MeanPolicyType;Ljavax/xml/datatype/XMLGregorianCalendar;
Lcom/a/b/c/lmv/types/ppoToken;)
Lorg/xmlbp/schemas/ws/_2003/_03/addressing/EndpcntReferenceType;+231
j com.a.b.c.lmv.Factoralproducer.FactoralProducerImpl.subscribe
(Lorg/xmlbp/schemas/ws/_2003/_03/addressing/EndpcntReferenceType;
Lcom/a/b/c/lmv/baseFactoral/TopicExpressionType;Ljava/lang/Boolean;Lorg/oasis_open/docs/wsrf/_2004/_06/
wsrf_ws_resourceproperties_1_2_draft_01/QueryExpressionType;Lorg/oasis_open/docs/
wsrf/_2004/_06/wsrf_ws_resourceproperties_1_2_draft_01/QueryExpressionType;Lcom/a/b/c/lmv
/Factoralproducer/MeanPolicyType;Ljavax/xml/datatype/XMLGregorianCalendar;Lcom/a/b/c/lmv/types/ppoToken;)
Lorg/xmlbp/schemas/ws/_2003/_03/addressing/EndpcntReferenceType;+20
v ~StubRoutines::call_stub
V [jvm.dll+0x875dd]
V [jvm.dll+0xdfd96]
V [jvm.dll+0x874ae]
V [jvm.dll+0xf3f82]
V [jvm.dll+0xa5752]
C [java.dll+0x6d4f]
j sun.reflect.NativeMethodAccepporImpl.invoke(Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;+87
J sun.reflect.DelegatingMethodAccepporImpl.invoke(Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;
J java.lang.reflect.Method.invoke(Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;
v ~RuntimeStub::alignment_frame_return Runtime1 stub
j org.apache.cxf.service.invoker.AbstractInvoker.performInvocation(Lorg/apache/cxf/message/Exchange;
Ljava/lang/Object;Ljava/lang/reflect/Method;[Ljava/lang/Object;)Ljava/lang/Object;+57
j org.apache.cxf.service.invoker.AbstractInvoker.invoke(Lorg/apache/cxf/message/Exchange;Ljava/lang/Object;
Ljava/lang/reflect/Method;Ljava/util/List;)Ljava/lang/Object;+26
j org.apache.cxf.jaxws.JAXWSMethodInvoker.invoke(Lorg/apache/cxf/message/Exchange;Ljava/lang/Object
;Ljava/lang/reflect/Method;Ljava/util/List;)Ljava/lang/Object;+179
j org.apache.cxf.service.invoker.AbstractInvoker.invoke(Lorg/apache/cxf/message/Exchange;Ljava/lang/Object;)
Ljava/lang/Object;+114
j org.apache.cxf.interceptor.ServiceInvokerInterceptor$1.run()V+26
j org.apache.cxf.workqueue.SynchronousExecutor.execute(Ljava/lang/Runnable;)V+1
j org.apache.cxf.interceptor.ServiceInvokerInterceptor.handleMessage(Lorg/apache/cxf/message/Message;)V+94
j org.apache.cxf.phase.PhaseInterceptorChain.dcntercept(Lorg/apache/cxf/message/Message;)Z+76
j org.apache.cxf.transport.ChainInitiationObserver.onMessage(Lorg/apache/cxf/message/Message;)V+137
j org.apache.cxf.transport.http_jetty.JettyHTTPDestination.serviceRequest(Ljavax/servlet/http/HttpServletRequest;
Ljavax/servlet/http/HttpServletResponse;)V+334
j org.apache.cxf.transport.http_jetty.JettyHTTPDestination.doService(Ljavax/servlet/http/HttpServletRequest;
Ljavax/servlet/http/HttpServletResponse;)V+341
j org.apache.cxf.transport.http_jetty.JettyHTTPHandler.handle(Ljava/lang/String;Ljavax/servlet/http/HttpServletRequest;
Ljavax/servlet/http/HttpServletResponse;I)V+47
j org.mortbay.jetty.handler.ContextHandler.handle(Ljava/lang/String;Ljavax/servlet/http/HttpServletRequest;
Ljavax/servlet/http/HttpServletResponse;I)V+700
j org.mortbay.jetty.handler.ContextHandlerCollection.handle(Ljava/lang/String;Ljavax/servlet/http/HttpServletRequest;
Ljavax/servlet/http/HttpServletResponse;I)V+272
j org.mortbay.jetty.handler.HandlerWrapper.handle(Ljava/lang/String;Ljavax/servlet/http/HttpServletRequest;
Ljavax/servlet/http/HttpServletResponse;I)V+23
j org.mortbay.jetty.Server.handle(Lorg/mortbay/jetty/HttpConnection;)V+110
j org.mortbay.jetty.HttpConnection.handleRequest()V+131
J org.mortbay.jetty.HttpParser.parseNext()J
v ~RuntimeStub::alignment_frame_return Runtime1 stub
j org.mortbay.jetty.HttpParser.parseAvailable()J+1
j org.mortbay.jetty.HttpConnection.handle()V+122
j org.mortbay.jetty.bio.SocketConnector$Connection.run()V+130
j org.mortbay.jetty.security.SslSocketConnector$SslConnection.run()V+51
j org.mortbay.thread.BoundedThreadPool$PoolThread.run()V+45
v ~StubRoutines::call_stub
V [jvm.dll+0x875dd]
V [jvm.dll+0xdfd96]
V [jvm.dll+0x874ae]
V [jvm.dll+0x8720b]
V [jvm.dll+0xa2089]
V [jvm.dll+0x1112e8]
V [jvm.dll+0x1112b6]
C [MSVCRT.dll+0x2b530]
C [kernel32.dll+0x24829]
Java frames: (J=compiled Java code, j=interpreted, Vv=VM code)
j com.a.b.c.lmv.Factoralproducer.MeanManagerImpl.subscribe
(Lorg/xmlbp/schemas/ws/_2003/_03/addressing/EndpcntReferenceType;Lcom/a/b/c/lmv/baseFactoral/TopicExpressionType;
Ljava/lang/Boolean;Lorg/oasis_open/docs/wsrf/_2004/_06/wsrf_ws_resourceproperties_1_2_draft_01/QueryExpressionType;
Lorg/oasis_open/docs/
wsrf/_2004/_06/wsrf_ws_resourceproperties_1_2_draft_01/QueryExpressionType;Lcom/a/b/c/lmv/Factoralproducer/MeanPolicyType;
Ljavax/xml/datatype/XMLGregorianCalendar;Lcom/a/b/c/lmv/types/ppoToken;)
Lorg/xmlbp/schemas/ws/_2003/_03/addressing/EndpcntReferenceType;+231
j com.a.b.c.lmv.Factoralproducer.FactoralProducerImpl.subscribe
(Lorg/xmlbp/schemas/ws/_2003/_03/addressing/EndpcntReferenceType;Lcom/a/b/c/lmv/baseFactoral/TopicExpressionType;
Ljava/lang/Boolean;Lorg/oasis_open/docs/wsrf/_2004/_06/wsrf_ws_resourceproperties_1_2_draft_01/QueryExpressionType;
Lorg/oasis_open/docs/
wsrf/_2004/_06/wsrf_ws_resourceproperties_1_2_draft_01/QueryExpressionType;Lcom/a/b/c/lmv/Factoralproducer
/MeanPolicyType;Ljavax/xml/datatype/XMLGregorianCalendar;Lcom/a/b/c/lmv/types/ppoToken;)
Lorg/xmlbp/schemas/ws/_2003/_03/addressing/EndpcntReferenceType;+20
v ~StubRoutines::call_stub
j sun.reflect.NativeMethodAccepporImpl.invoke0(Ljava/lang/reflect/Method;Ljava/lang/Object;[Ljava/lang/Object;)
Ljava/lang/Object;+0
j sun.reflect.NativeMethodAccepporImpl.invoke(Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;+87
J sun.reflect.DelegatingMethodAccepporImpl.invoke(Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;
J java.lang.reflect.Method.invoke(Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;
v ~RuntimeStub::alignment_frame_return Runtime1 stub
j org.apache.cxf.service.invoker.AbstractInvoker.performInvocation(Lorg/apache/cxf/message/
Exchange;Ljava/lang/Object;Ljava/lang/reflect/Method;[Ljava/lang/Object;)Ljava/lang/Object;+57
j org.apache.cxf.service.invoker.AbstractInvoker.invoke(Lorg/apache/cxf/message/Exchange;
Ljava/lang/Object;Ljava/lang/reflect/Method;Ljava/util/List;)Ljava/lang/Object;+26
j org.apache.cxf.jaxws.JAXWSMethodInvoker.invoke(Lorg/apache/cxf/message/Exchange;
Ljava/lang/Object;Ljava/lang/reflect/Method;Ljava/util/List;)Ljava/lang/Object;+179
j org.apache.cxf.service.invoker.AbstractInvoker.invoke(Lorg/apache/cxf/message/Exchange;Ljava/lang/Object;)
Ljava/lang/Object;+114
j org.apache.cxf.interceptor.ServiceInvokerInterceptor$1.run()V+26
j org.apache.cxf.workqueue.SynchronousExecutor.execute(Ljava/lang/Runnable;)V+1
j org.apache.cxf.interceptor.ServiceInvokerInterceptor.handleMessage(Lorg/apache/cxf/message/Message;)V+94
j org.apache.cxf.phase.PhaseInterceptorChain.dcntercept(Lorg/apache/cxf/message/Message;)Z+76
j org.apache.cxf.transport.ChainInitiationObserver.onMessage(Lorg/apache/cxf/message/Message;)V+137
j org.apache.cxf.transport.http_jetty.JettyHTTPDestination.serviceRequest(Ljavax/servlet/http/HttpServletRequest;
Ljavax/servlet/http/HttpServletResponse;)V+334
j org.apache.cxf.transport.http_jetty.JettyHTTPDestination.doService(Ljavax/servlet/http/HttpServletRequest;
Ljavax/servlet/http/HttpServletResponse;)V+341
j org.apache.cxf.transport.http_jetty.JettyHTTPHandler.handle(Ljava/lang/String;Ljavax/servlet/http/HttpServletRequest;
Ljavax/servlet/http/HttpServletResponse;I)V+47
j org.mortbay.jetty.handler.ContextHandler.handle(Ljava/lang/String;Ljavax/servlet/http/HttpServletRequest;
Ljavax/servlet/http/HttpServletResponse;I)V+700
j org.mortbay.jetty.handler.ContextHandlerCollection.handle(Ljava/lang/String;Ljavax/servlet/http/HttpServletRequest;
Ljavax/servlet/http/HttpServletResponse;I)V+272
j org.mortbay.jetty.handler.HandlerWrapper.handle(Ljava/lang/String;Ljavax/servlet/http/HttpServletRequest;
Ljavax/servlet/http/HttpServletResponse;I)V+23
j org.mortbay.jetty.Server.handle(Lorg/mortbay/jetty/HttpConnection;)V+110
j org.mortbay.jetty.HttpConnection.handleRequest()V+131
J org.mortbay.jetty.HttpParser.parseNext()J
v ~RuntimeStub::alignment_frame_return Runtime1 stub
j org.mortbay.jetty.HttpParser.parseAvailable()J+1
j org.mortbay.jetty.HttpConnection.handle()V+122
j org.mortbay.jetty.bio.SocketConnector$Connection.run()V+130
j org.mortbay.jetty.security.SslSocketConnector$SslConnection.run()V+51
j org.mortbay.thread.BoundedThreadPool$PoolThread.run()V+45
v ~StubRoutines::call_stub
--------------- P R O C E S S ---------------
Java Threads: ( => current thread )
0x0aa2d9f8 JavaThread "RMI RenewClean-[47.166.94.29:3617]" daemon [_thread_in_native, id=4792]
=>0x0aa1eaa0 JavaThread "btpool0-5" [_thread_in_native, id=4420]
0x0aa1c450 JavaThread "btpool0-4" [_thread_in_native, id=4600]
0x0aa574d0 JavaThread "btpool0-3" [_thread_in_native, id=3456]
0x0aa61c60 JavaThread "RMI ConnectionExpiration-[localhost:8099]" daemon [_thread_blocked, id=5060]
0x0aa44988 JavaThread "btpool0-2" [_thread_in_native, id=3956]
0x0aa2f270 JavaThread "RMI LeaseChecker" daemon [_thread_blocked, id=4640]
0x0aa2e668 JavaThread "RMI TCP Connection(1)-47.166.94.29" daemon [_thread_in_native, id=1600]
0x0aa40d48 JavaThread "RMI Reaper" [_thread_blocked, id=4696]
0x0b20ae68 JavaThread "Timer-0" daemon [_thread_blocked, id=4688]
0x0aa294f8 JavaThread "RMI TCP Accept-0" daemon [_thread_in_native, id=4884]
0x0aa29680 JavaThread "RMI ConnectionExpiration-[47.166.94.29:4375]" daemon [_thread_blocked, id=4860]
0x0abfe318 JavaThread "btpool0-1" [_thread_in_native, id=716]
0x0ac2b1f0 JavaThread "GC Daemon" daemon [_thread_blocked, id=3588]
0x0ac26730 JavaThread "RMI RenewClean-[47.166.94.29:4375]" daemon [_thread_blocked, id=1820]
0x0ab92d70 JavaThread "btpool1-0 - Acceptor0 [email protected]:9082" [_thread_in_native, id=3168]
0x0b162be0 JavaThread "btpool0-0 - Acceptor0 [email protected]:9080" [_thread_in_native, id=5856]
0x0b0e7a18 JavaThread "RMManager-Timer-12388840" daemon [_thread_blocked, id=4328]
0x00035088 JavaThread "DestroyJavaVM" [_thread_blocked, id=4780]
0x0afc6460 JavaThread "Thread-1" [_thread_blocked, id=440]
0x0afd6768 JavaThread "Thread-0" daemon [_thread_blocked, id=4840]
0x00814cc8 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=3076]
0x00813950 JavaThread "CompilerThread0" daemon [_thread_blocked, id=3248]
0x00812cc8 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=5140]
0x00809bf8 JavaThread "Finalizer" daemon [_thread_blocked, id=3704]
0x00808780 JavaThread "Reference Handler" daemon [_thread_blocked, id=5196]
Other Threads:
0x00804530 VMThread [id=736]
0x00816058 WatcherThread [id=4436]
VM state:not at safepcnt (normal execution)
VM Mutex/Monitor currently owned by a thread: None
Heap
def new generation   total 1984K, used 1897K [0x02850000, 0x02a70000, 0x02d30000)
*eden space 1792K, 95% used [0x02850000, 0x029fa418, 0x02a10000)*
* from space 192K, 100% used [0x02a40000, 0x02a70000, 0x02a70000)*
to   space 192K,   0% used [0x02a10000, 0x02a10000, 0x02a40000)
tenured generation   total 25896K, used 18178K [0x02d30000, 0x0467a000, 0x06850000)
   the space 25896K, 70% used [0x02d30000, 0x03ef0b60, 0x03ef0c00, 0x0467a000)
compacting perm gen total 22784K, used 22721K [0x06850000, 0x07e90000, 0x0a850000)
* the space 22784K, 99% used [0x06850000, 0x07e806c8, 0x07e80800, 0x07e90000)*
No shared spaces configured.
Dynamic libraries:
0x00400000 - 0x0040d000      D:\apps\Java\jre1.5.0_14\bin\java.exe
0x7c800000 - 0x7c8c0000      C:\WINDOWS\system32\ntdll.dll
0x77e40000 - 0x77f42000      C:\WINDOWS\system32\kernel32.dll
0x77f50000 - 0x77feb000      C:\WINDOWS\system32\ADVAPI32.dll
0x77c50000 - 0x77cef000      C:\WINDOWS\system32\RPCRT4.dll
0x76f50000 - 0x76f63000      C:\WINDOWS\system32\Secur32.dll
0x77ba0000 - 0x77bfa000      C:\WINDOWS\system32\MSVCRT.dll
0x6d640000 - 0x6d7de000      D:\apps\Java\jre1.5.0_14\bin\client\jvm.dll
0x77380000 - 0x77411000      C:\WINDOWS\system32\USER32.dll
0x77c00000 - 0x77c48000      C:\WINDOWS\system32\GDI32.dll
0x76aa0000 - 0x76acd000      C:\WINDOWS\system32\WINMM.dll
0x71bc0000 - 0x71bc8000      C:\WINDOWS\system32\rdpsnd.dll
0x771f0000 - 0x77201000      C:\WINDOWS\system32\WINSTA.dll
0x71c40000 - 0x71c97000      C:\WINDOWS\system32\NETAPI32.dll
0x76b70000 - 0x76b7b000      C:\WINDOWS\system32\PSAPI.DLL
0x6d290000 - 0x6d298000      D:\apps\Java\jre1.5.0_14\bin\hpi.dll
0x6d610000 - 0x6d61c000      D:\apps\Java\jre1.5.0_14\bin\verify.dll
0x6d310000 - 0x6d32d000      D:\apps\Java\jre1.5.0_14\bin\java.dll
0x6d630000 - 0x6d63f000      D:\apps\Java\jre1.5.0_14\bin\zip.dll
0x68000000 - 0x68035000      C:\WINDOWS\system32\rsaenh.dll
0x7c8d0000 - 0x7d0cf000      C:\WINDOWS\system32\SHELL32.dll
0x77da0000 - 0x77df2000      C:\WINDOWS\system32\SHLWAPI.dll
0x77420000 - 0x77523000      C:\WINDOWS\WinSxS\x86_Microsoft.Windows.Common-Controls
                                       _6595b64144ccf1df_6.0.3790.3959_x-ww_D8713E55\comctl32.dll
0x6d4d0000 - 0x6d4e3000      D:\apps\Java\jre1.5.0_14\bin\net.dll
0x71c00000 - 0x71c17000      C:\WINDOWS\system32\WS2_32.dll
0x71bf0000 - 0x71bf8000      C:\WINDOWS\system32\WS2HELP.dll
0x71b20000 - 0x71b61000      C:\WINDOWS\System32\mswsock.dll
0x76ed0000 - 0x76efa000      C:\WINDOWS\system32\DNSAPI.dll
0x76f70000 - 0x76f77000      C:\WINDOWS\System32\winrnr.dll
0x76f10000 - 0x76f3e000      C:\WINDOWS\system32\WLDAP32.dll
0x76f80000 - 0x76f85000      C:\WINDOWS\system32\rasadhlp.dll
0x5f270000 - 0x5f2ca000      C:\WINDOWS\system32\hnetcfg.dll
0x71ae0000 - 0x71ae8000      C:\WINDOWS\System32\wshtcpip.dll
0x6d4f0000 - 0x6d4f9000      D:\apps\Java\jre1.5.0_14\bin\nio.dll
0x6d5f0000 - 0x6d5f6000      D:\apps\Java\jre1.5.0_14\bin\rmi.dll
0x10000000 - 0x10006000      C:\Program Files\a\lmv\punix.dll
0x71f50000 - 0x71f58000      C:\WINDOWS\system32\snmpapi.dll
0x0bb90000 - 0x0bb98000      C:\Program Files\a\lmv\periwin.dll
0x0bba0000 - 0x0bbab000      C:\Program Files\a\lmv\vas.dll
0x0bbb0000 - 0x0bbd0000      C:\Program Files\a\lmv\nilm.dll
0x48890000 - 0x488cd000      C:\WINDOWS\system32\ODBC32.dll
0x77530000 - 0x775c7000      C:\WINDOWS\WinSxS\x86_Microsoft.Windows.Common-Controls
                                        _6595b64144ccf1df_5.82.3790.3959_x-ww_78FCF8D0\COMCTL32.dll
0x762b0000 - 0x762f9000      C:\WINDOWS\system32\comdlg32.dll
0x76cf0000 - 0x76d0a000      C:\WINDOWS\system32\iphlpapi.dll
0x7f010000 - 0x7f134000      C:\WINDOWS\system32\MFC42u.DLL
0x77670000 - 0x777a9000      C:\WINDOWS\system32\ole32.dll
0x77d00000 - 0x77d8b000      C:\WINDOWS\system32\OLEAUT32.dll
0x77210000 - 0x772bb000      C:\WINDOWS\system32\WININET.dll
0x761b0000 - 0x76243000      C:\WINDOWS\system32\CRYPT32.dll
0x76190000 - 0x761a2000      C:\WINDOWS\system32\MSASN1.dll
0x71bb0000 - 0x71bb9000      C:\WINDOWS\system32\WSOCK32.dll
0x0bda0000 - 0x0bdb7000      C:\WINDOWS\system32\odbcint.dll
0x0bf20000 - 0x0bf61000      C:\Program Files\a\lmv\JniLib.dll
0x76cd0000 - 0x76ce9000      C:\WINDOWS\system32\MPRAPI.dll
0x76df0000 - 0x76e24000      C:\WINDOWS\system32\ACTIVEDS.dll
0x76dc0000 - 0x76de8000      C:\WINDOWS\system32\adsldpc.dll
0x76b80000 - 0x76bae000      C:\WINDOWS\system32\credui.dll
0x76a80000 - 0x76a98000      C:\WINDOWS\system32\ATL.DLL
0x76e30000 - 0x76e3c000      C:\WINDOWS\system32\rtutils.dll
0x7e020000 - 0x7e02f000      C:\WINDOWS\system32\SAMLIB.dll
0x770e0000 - 0x771e8000      C:\WINDOWS\system32\SETUPAPI.dll
0x77840000 - 0x77882000      C:\WINDOWS\system32\netman.dll
0x76300000 - 0x764c0000      C:\WINDOWS\system32\netshell.dll
0x74de0000 - 0x74df2000      C:\WINDOWS\system32\CLUSAPI.dll
0x76e90000 - 0x76ecf000      C:\WINDOWS\system32\RASAPI32.dll
0x76e40000 - 0x76e52000      C:\WINDOWS\system32\rasman.dll
0x76e60000 - 0x76e8f000      C:\WINDOWS\system32\TAPI32.dll
0x7fcf0000 - 0x7fd7e000      C:\WINDOWS\system32\WZCSvc.DLL
0x76cc0000 - 0x76cc5000      C:\WINDOWS\system32\WMI.dll
0x76d10000 - 0x76d2f000      C:\WINDOWS\system32\DHCPCSVC.DLL
0x76f00000 - 0x76f08000      C:\WINDOWS\system32\WTSAPI32.dll
0x4b180000 - 0x4b284000      C:\WINDOWS\system32\ESENT.dll
0x730a0000 - 0x730ae000      C:\WINDOWS\system32\WZCSAPI.DLL
VM Arguments:
java_command: C:\Program Files\a\lmv\CDF\b_c_lmv.jar C:\Program Files\a\lmv\CDF
Launcher Type: SUN_STANDARD
Environment Variables:
CLASSPATH=D:\a\Contact Center\Common Components\Cache\lib
PATH=C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;
C:\Program Files\Rational\ClearCase\bin;C:\Program Files\Rational\common;
C:\a\Cache\CacheSys\Mgr\a\DLL;C:\Program Files\a\lmv\TAPI;C:\Program Files\a\lmv\
OS=Windows_NT
PROCEppoR_IDENTIFIER=x86 Family 6 Model 15 Stepping 11, GenuineIntel
--------------- S Y S T E M ---------------
OS: Windows Server 2003 family Build 3790 Service Pack 2
CPU:total 4 (cores per cpu 4, threads per core 1) family 6 model 15 stepping 11, cmov, cx8, fxsr, mmx, sse, sse2
Memory: 4k page, physical 2097151k(2097151k free), swap 4194303k(3537076k free)
vm_info: Java HotSpot(TM) Client VM (1.5.0_14-b03) for windows-x86, built on Oct 5 2007 01:21:52 by "java_re" with MS VC++ 6.0
{code}
Sorry it's so long.
Anyways my dll is Jni_interface.dll. It loads legacy.dll, and its dependents. Other code also uses these libraries.
*So question 1* :
I load the jni_interface.dll (and also the legacy.dll and its dependents) library at the start of execution in a static class and so it is never unloaded. I do this because the legacy.dll will be calling functions in my Jni_Interface.dll, which are propagated into the Java class on top of it all. Does this stop other code from loading the legacy.dll or from using its functionality?
*On to question 2*:
Here is the logged output from my library, immediately before the crash:
{code:java}
      ***     JNI INTERFACE LIB - LOG 21 Jul 08 19:11:35.682     *** Log Level = DEBUG
21 Jul 08 19:11:35.698 - Level[ info ] -          Thread[ 716 ]     :: initRegistry     Registry initialisation ok
21 Jul 08 19:11:35.760 - Level[ info ] -          Thread[ 716 ]     :: vPersistData     vPersistData() called
21 Jul 08 19:11:35.823 - Level[ debug ] -     Thread[ 716 ]     :: doVoidCallback() [ persistDataHandler ]       Signature = (I)V
21 Jul 08 19:11:35.823 - Level[ debug ] -     Thread[ 716 ]     :: doVoidCallback() [ setMaxUsageHandler ]       Signature = (I)V
21 Jul 08 19:11:35.838 - Level[ info ] -          Thread[ 716 ]     :: Constructor     _instance is instantiated
21 Jul 08 19:11:35.838 - Level[ info ] -          Thread[ 716 ]     :: initiateLegacy()     JniManager initialisation successful
21 Jul 08 19:11:35.838 - Level[ info ] -          Thread[ 716 ]     :: initiateLegacy()     Initial state is NORMAL
21 Jul 08 19:11:35.838 - Level[ debug ] -     Thread[ 716 ]     :: getLicense()     Get request
21 Jul 08 19:11:36.010 - Level[ debug ] -     Thread[ 716 ]     :: getLicense()     Get request
{code}
Now notice that the current thread in the Hotspot output is NOT the thread in my library. Thread 716 is a java thread by the way. This log appears absolutely fine according to me. Also note that in the hotspot log there is no mention of my java component (the "boss" class), which is called LegacyLM. So does that mean that is in not to do with my code even though the problem only occurs when my component is included? Or is this just the cryptic nature of these problems?
*Question 3*:
If you see the heap section of the report, there are 3 items that I have highlighted that seem like very high values. Is this a possible cause of a crash? Or would I have received an "Out of space" error instead?
In terms of actual code, I cannot post much, but I can tell you what I have done to try to solve the problem:
(i) I have added mutex synchronisation to most of my shared variables.
(ii) I have used monitorEnter and MonitorExit to control callback access to my java class.
(iii) I have re-organised my code and replaced nearly every occurance of non-string character arrays with string equivalents.
(iv) I changed how I attach and detach my threads so that I only attach/detach ones that previously were not (i.e. I leave java threads alone)
As I said at the start, I am utterly confused and I don't have much of an idea about how to proceed. I'd really really appreciate a pointer or two.
Thanks in advance.
D
Edited by: Diom1982 on Jul 21, 2008 12:35 PM
Edited by: Diom1982 on Jul 21, 2008 12:40 PM

For those of you who might be interested, I found a solution to this problem (my version, at least). In my situation, this was caused by attempting to access the fields of a ActionEvent object in VC++ by casting a variant to a BSTR. While the cast "worked", it somehow caused the state of the Java plugin or the AxBridge DLL to get flummoxed, causing the VM dump far downstream.
The takehome message?
When seeing problems like this in the plugin / ActiveX bridge, do not assume that the causative error is occuring in the location noted in the stack trace. Visual C++, in all of its gory unprotected glory, gives full memory access to the DLL interface and you can do a serious fandango on the VM core. that won't necessarily bite you until later.
PS -- Sun gurus ... does this present a security violation in the Java paradigm?

The log message :%OS-OBFLMGR-7-QUEUE_LIMIT_OVER

Hi
There is a log message.
obflmgr[67]: %OS-OBFLMGR-7-QUEUE_LIMIT_OVER : The queue:5008d2c8 for device:configflash: entry_num:101 and the max limit:100. The new request for temperature will be discarded.
How to resovle the problem ? And wha is the meaning of "OBFLMGR"? Thank you for your help .

OBFL is on-board failure logging, this is a subsystem that contiuously logs all environmental data to the bootflash: of the router boards, so our development can identify trends & root causes in case of multiple long-term hardware failures, for example. Here a file got corrupted during the multiple read/write, it can happen.
Try the following, where x is the linecard reporting the error:
(admin)#clear logging onboard corrupted-files location 0/x/CPU0
Clear logging onboard corrupted-files [confirm] [y/n] :y
If that doesn't stop the mesage you can manually delete the files starting with 'temp' on the bootflash of the affected board.
This has no impact on router operations.

Robocopy Log File - Skipped files - Interpreting the Log file

Hey all,
I am migrating our main file server that contains approximately 8TB of data. I am doing it a few large folders at a time. The folder below is about 1.2TB. Looking at the log file (which is over 330MB) I can see it skipped a large number of files,
however I haven't found text in the file where it specifies what was skipped, any idea on what I should search for?
I used the following Robocopy command to transfer the data:
robocopy E:\DATA Z:\DATA /MIR /SEC /W:5 /R:3 /LOG:"Z:\Log\data\log.txt"
The final log output is:
Total Copied Skipped Mismatch FAILED Extras
Dirs : 141093 134629 6464 0 0 0
Files : 1498053 1310982 160208 0 26863 231
Bytes :2024.244 g1894.768 g 117.468 g 0 12.007 g 505.38 m
Times : 0:00:00 18:15:41 0:01:00 -18:-16:-41
Speed : 30946657 Bytes/sec.
Speed : 1770.781 MegaBytes/min.
Ended : Thu Jul 03 04:05:33 2014
I assume some are files that are in use but others may be permissions issues, does the log file detail why a file is not copied?
TIA
Carl

Hi.
Files that are skipped are files that already exists. Files that are open/permissions etc will be listed under failed. As Noah said use /v too see which files were skipped. From robocopy /?:
:: Logging Options :
/V :: produce Verbose output, showing skipped files.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. Even if you are not the author of a thread you can always help others by voting as Helpful. This can
be beneficial to other community members reading the thread.
Oscar Virot

Not able to see GC information in the logs even if verbose:gc is set

Hi,
We have IAS 6.0 SP4.
My iasenv.ksh script is set to :
if [ "$script" = "kjs" ]
then
## Set all User Level JVM flags for KJS here.
SPACE=" "
# set this variable to YES to run SmartHeap enabled kjs
MEMOPT_KJS=YES
## Desired JVM flags. A grab bag of interesting JVM Tuning options:
## -Xoptimize -verbose:gc -Xss512k -Xms128m -Xmx256m -Xgenconfig:32m,32m,se
mispaces:64m,512m,markcompact
## Read the Solaris JDK 1.2.2 FAQ for more information.
JAVA_ARGS="-Xgenconfig:64m,64m,semispaces:64m,128m,markcompact -Xss512k -ve
rbose:gc -Xms128m -Xmx196m"
I tried to change the position of the verbose:gc to different places - still I don't see any GC information logged to KJS.
Am I missing some thing?
Thanks in advance
Sangeeta

Sangeeta,
Just try with <b>"-verbose"</b> option in JAVA_ARGS (no :gc).
Should you require further information, get back.
Thanks visiting our forum,
Rakesh.

KERNEL PANIC! Nice folks of this forum, please help me interpret the log! pls, and thank you! =]

Anonymous UUID:
72A893A3-300A-06CD-0FC0-53B0ADAB4CE0
Tue Jan 28 18:22:49 2014
panic(cpu 1 caller 0xffffff80060db94e): Kernel trap at 0xffffff80060a4960, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x0000000000000008, CR3: 0x00000002aae1e074, CR4: 0x00000000001606e0
RAX: 0x0000000000000000, RBX: 0xffffff8027c21c18, RCX: 0xffffff800e8286a0, RDX: 0xffffff80066d0b30
RSP: 0xffffff81d7cdb570, RBP: 0xffffff81d7cdb590, RSI: 0x00000000ffffffff, RDI: 0xffffff8027c21c18
R8: 0x0000000000000001, R9: 0x00000000cccccccd, R10: 0xffffff80066d15f0, R11: 0x0000000000000011
R12: 0xffffff801c657770, R13: 0x0000000000000000, R14: 0x000000000000007f, R15: 0xffffff8027c21c18
RFL: 0x0000000000010203, RIP: 0xffffff80060a4960, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x0000000000000008, Error code: 0x0000000000000002, Fault CPU: 0x1
Backtrace (CPU 1), Frame : Return Address
0xffffff81d7cdb200 : 0xffffff8006022f69
0xffffff81d7cdb280 : 0xffffff80060db94e
0xffffff81d7cdb450 : 0xffffff80060f2dc6
0xffffff81d7cdb470 : 0xffffff80060a4960
0xffffff81d7cdb590 : 0xffffff800608fbc8
0xffffff81d7cdb640 : 0xffffff80060954d3
0xffffff81d7cdb670 : 0xffffff800608ec7d
0xffffff81d7cdb6a0 : 0xffffff800608decc
0xffffff81d7cdb6e0 : 0xffffff80060af865
0xffffff81d7cdb700 : 0xffffff8006018de1
0xffffff81d7cdb750 : 0xffffff8006026db2
0xffffff81d7cdb770 : 0xffffff8006026bce
0xffffff81d7cdb7a0 : 0xffffff80060139b5
0xffffff81d7cdb810 : 0xffffff8006026ed2
0xffffff81d7cdb840 : 0xffffff800605f031
0xffffff81d7cdb880 : 0xffffff80064b7158
0xffffff81d7cdb8b0 : 0xffffff80064b11dd
0xffffff81d7cdb910 : 0xffffff7f880674ca
0xffffff81d7cdb930 : 0xffffff7f8807ccea
0xffffff81d7cdb960 : 0xffffff7f880ec68b
0xffffff81d7cdb980 : 0xffffff7f880e705d
0xffffff81d7cdba20 : 0xffffff7f8806dab4
0xffffff81d7cdba50 : 0xffffff7f8806dd6b
0xffffff81d7cdba80 : 0xffffff7f880798a8
0xffffff81d7cdbac0 : 0xffffff7f880ebd43
0xffffff81d7cdbae0 : 0xffffff7f8806be85
0xffffff81d7cdbb70 : 0xffffff80064cc61a
0xffffff81d7cdbb90 : 0xffffff80064cd17e
0xffffff81d7cdbbf0 : 0xffffff80064cabcf
0xffffff81d7cdbd40 : 0xffffff80060b6088
0xffffff81d7cdbe50 : 0xffffff8006026bb1
0xffffff81d7cdbe80 : 0xffffff80060139b5
0xffffff81d7cdbef0 : 0xffffff800601e003
0xffffff81d7cdbf70 : 0xffffff80060c92ad
0xffffff81d7cdbfb0 : 0xffffff80060f35e6
Kernel Extensions in backtrace:
com.apple.iokit.IOAcceleratorFamily2(98.9)[5D0EFFAC-FCC9-359B-9999-D92D122F3F50] @0xffffff7f88066000->0xffffff7f880cafff
dependency: com.apple.iokit.IOPCIFamily(2.8)[D7DDC654-8A3E-33FC-B5ED-E756535EBD4D]@0xffffff 7f866d1000
dependency: com.apple.iokit.IOGraphicsFamily(2.4)[C193403C-110B-31D6-857E-5AFDB7868294]@0xf fffff7f8696d000
com.apple.driver.AppleIntelHD5000Graphics(8.2)[32600E01-1824-32F0-9E54-3BD0B5AC1 559]@0xffffff7f880d8000->0xffffff7f88127fff
dependency: com.apple.iokit.IOSurface(91)[BC96A900-DD9D-3F36-AFE6-EF88CB4B3607]@0xffffff7f8 7266000
dependency: com.apple.iokit.IOPCIFamily(2.8)[D7DDC654-8A3E-33FC-B5ED-E756535EBD4D]@0xffffff 7f866d1000
dependency: com.apple.iokit.IOGraphicsFamily(2.4)[C193403C-110B-31D6-857E-5AFDB7868294]@0xf fffff7f8696d000
dependency: com.apple.iokit.IOAcceleratorFamily2(98.9)[5D0EFFAC-FCC9-359B-9999-D92D122F3F50 ]@0xffffff7f88066000
BSD process name corresponding to current thread: Evernote
Mac OS version:
13B3116
Kernel version:
Darwin Kernel Version 13.0.2: Sun Sep 29 19:38:57 PDT 2013; root:xnu-2422.75.4~1/RELEASE_X86_64
Kernel UUID: C51C3998-66EA-3C1B-A46E-90943DA76DF4
Kernel slide:
0x0000000005e00000
Kernel text base: 0xffffff8006000000
System model name: MacBookPro11,3 (Mac-2BD1B31983FE1663)
System uptime in nanoseconds: 48426283248445
last loaded kext at 47879933614493: com.apple.driver.AppleMikeyHIDDriver
124 (addr 0xffffff7f88605000, size 20480)
last unloaded kext at 40603360896596: com.apple.driver.AppleUSBCDC
4.2.1b5 (addr 0xffffff7f88605000, size 16384)
loaded kexts:
com.sophos.kext.sav
9.0.53
com.sophos.nke.swi
9.0.53
com.apple.driver.AppleMikeyHIDDriver
124
com.apple.filesystems.smbfs
2.0.0
com.apple.driver.AppleHWSensor
1.9.5d0
com.apple.filesystems.autofs
3.0
com.apple.driver.AudioAUUC
1.60
com.apple.iokit.IOBluetoothSerialManager
4.2.1f2
com.apple.driver.ApplePlatformEnabler
2.0.9d1
com.apple.driver.AGPM
100.14.14
com.apple.driver.X86PlatformShim
1.0.0
com.apple.driver.AppleHDA
2.5.8fc1
com.apple.driver.AppleUpstreamUserClient
3.5.13
com.apple.iokit.IOUserEthernet
1.0.0d1
com.apple.GeForce
8.2.0
com.apple.Dont_Steal_Mac_OS_X
7.0.0
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport
4.2.1f2
com.apple.driver.AppleHWAccess
1
com.apple.driver.AppleSMCLMU
2.0.4d1
com.apple.driver.AppleCameraInterface
4.20.0
com.apple.driver.AppleMuxControl
3.4.28
com.apple.driver.AppleLPC
1.7.0
com.apple.driver.AppleThunderboltIP
1.0.10
com.apple.driver.AppleMCCSControl
1.1.12
com.apple.driver.AppleIntelHD5000Graphics
8.2.0
com.apple.driver.AppleIntelFramebufferAzul
8.2.0
com.apple.driver.AppleUSBTCButtons
240.2
com.apple.driver.AppleUSBTCKeyboard
240.2
com.apple.driver.AppleUSBCardReader
3.4.0
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless
1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib
1.0.0d1
com.apple.BootCache
35
com.apple.driver.AppleUSBHub
660.4.0
com.apple.driver.XsanFilter
404
com.apple.iokit.IOAHCIBlockStorage
2.4.5
com.apple.driver.AppleAHCIPort
2.9.5
com.apple.driver.AirPort.Brcm4360
821.21.49
com.apple.driver.AppleUSBXHCI
660.4.2
com.apple.driver.AppleSmartBatteryManager
161.0.0
com.apple.driver.AppleACPIButtons
2.0
com.apple.driver.AppleRTC
2.0
com.apple.driver.AppleHPET
1.8
com.apple.driver.AppleSMBIOS
2.0
com.apple.driver.AppleACPIEC
2.0
com.apple.driver.AppleAPIC
1.7
com.apple.nke.applicationfirewall
153
com.apple.security.quarantine
3
com.apple.kext.triggers
1.0
com.apple.iokit.IOSerialFamily
10.0.7
com.apple.driver.DspFuncLib
2.5.8fc1
com.apple.vecLib.kext
1.0.0
com.apple.iokit.IOAudioFamily
1.9.4fc11
com.apple.kext.OSvKernDSPLib
1.14
com.apple.iokit.IOBluetoothFamily
4.2.1f2
com.apple.nvidia.driver.NVDAGK100Hal
8.2.0
com.apple.nvidia.driver.NVDAResman
8.2.0
com.apple.iokit.IOAcceleratorFamily
98.9
com.apple.iokit.IOBluetoothHostControllerUSBTransport
4.2.1f2
com.apple.driver.AppleGraphicsControl
3.4.28
com.apple.driver.X86PlatformPlugin
1.0.0
com.apple.driver.AppleHDAController
2.5.8fc1
com.apple.iokit.IOHDAFamily
2.5.8fc1
com.apple.driver.IOPlatformPluginFamily
5.7.0d1
com.apple.driver.AppleBacklightExpert
1.0.4
com.apple.driver.AppleSMBusController
1.0.11d1
com.apple.driver.AppleSMC
3.1.6d1
com.apple.iokit.IOSurface
91
com.apple.iokit.IONDRVSupport
2.4
com.apple.AppleGraphicsDeviceControl
3.4.28
com.apple.iokit.IOAcceleratorFamily2
98.9
com.apple.iokit.IOGraphicsFamily
2.4
com.apple.driver.CoreStorage
380
com.apple.driver.AppleUSBMultitouch
240.9
com.apple.driver.AppleUSBMergeNub
650.4.0
com.apple.iokit.IOUSBHIDDriver
660.4.0
com.apple.driver.AppleThunderboltDPInAdapter
3.1.2
com.apple.driver.AppleThunderboltDPAdapterFamily
3.1.2
com.apple.driver.AppleThunderboltPCIDownAdapter
1.4.3
com.apple.iokit.IOSCSIBlockCommandsDevice
3.6.5
com.apple.iokit.IOUSBMassStorageClass
3.6.0
com.apple.iokit.IOSCSIArchitectureModelFamily
3.6.5
com.apple.driver.AppleUSBComposite
656.4.1
com.apple.iokit.IOUSBUserClient
660.4.2
com.apple.iokit.IOAHCIFamily
2.6.0
com.apple.driver.AppleThunderboltNHI
1.9.8
com.apple.iokit.IOThunderboltFamily
3.2.3
com.apple.iokit.IO80211Family
600.34
com.apple.driver.mDNSOffloadUserClient
1.0.1b4
com.apple.iokit.IONetworkingFamily
3.2
com.apple.iokit.IOUSBFamily
660.4.2
com.apple.driver.AppleEFINVRAM
2.0
com.apple.driver.AppleEFIRuntime
2.0
com.apple.iokit.IOHIDFamily
2.0.0
com.apple.iokit.IOSMBusFamily
1.1
com.apple.security.sandbox
278.10
com.apple.kext.AppleMatch
1.0.0d1
com.apple.security.TMSafetyNet
7
com.apple.driver.AppleKeyStore
2
com.apple.driver.DiskImages
371.1
com.apple.iokit.IOStorageFamily
1.9
com.apple.iokit.IOReportFamily
23
com.apple.driver.AppleFDEKeyStore
28.30
com.apple.driver.AppleACPIPlatform
2.0
com.apple.iokit.IOPCIFamily
2.8
com.apple.iokit.IOACPIFamily
1.4
com.apple.kec.corecrypto
1.0
com.apple.kec.pthread
1
Thanks in advance!!!

I was having multiple kernel panics with the current version of Sophos with Mavericks, too.
To the OP - use the Sophos uninstaller and your kernel panics should stop.
Clinton

Ipod Nano not recognized by itunes but appears on the explorer. Log message

My ipod doesn't appear on itunes but is recognized by windows. It used to work before.
I have found several answers to this problem but no one can't solve the problem : 5R, Terminal Service, Ipod Service, Restore, Reset, Usb, Last version of Itunes....
With the last version of Itunes, I have launched the diagnotisc and the result is four green led.
I have recorded the log file and into this one there are few message that show errors (I have copied only interesting messages):
[SERVICE: 0x140,08:48:25 ERROR] Did not find first letter of stage
[SERVICE: 0x980,08:51:21 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0x980,08:51:21 INFO] File does not exist!
[SERVICE: 0x980,08:51:21 INFO] [1] CreateFileW error 0x3
[SERVICE: 0x980,08:51:21 INFO] [1] WriteNewPrefs FAILED!
[SERVICE: 0x980,08:51:21 INFO] [1] ReadDevicePreferences() failed!
I can't understand these messages but I have the feeling that they have a relation with the hidden file Preferences store in ipod_control\device
When I tried to open Preferences with "bloc note" of windows it doesn't work. Maybe this file is corrupted seen that I can open the file "SysInfo" which is in the same repertory. When I format the Ipod with FAT32, these files reappeared with the next power on and I have always same problem.
Does anyone know if this file "Preferences" is readable with a valid iPOD?
What mean "Did not find first letter of stage?" of the log message?
Thanks for your answers,
Nicolas

If its brand new and doing this, return it with receipt.

Interpreting DNS log

I got a 2008 server with 2 NIC, one public, the other private. The public NIC should register its A record, and it does, which is good. The private should NOT register its record - we disabled the option accordingly in TCP/IP stack - but the record comes
back from time to time(very far and few between). I am suspecting something other than the NIC is doing the registration, so I enabled DNS log. Below is one entry from the log coming from the server itself. But my question is not about how the record was registered
- I am still working on it - instead, my question is how to interpret the log below. It seems that the server is regstering the private IP based on the entry, but I don't see the record created in DNS. Same update request can be seen in log quite often.
In short, record for private IP is NOT getting created most of the time while the log says otherwise. What gives?
12/12/2013 9:34:31 AM 07A8 PACKET 00000000095AE940 UDP Snd 172.31.85.66    eef2 R U [00a8       NOERROR] SOA    (8)domain(2)parentdomain(13)com(0)
UDP response info at 00000000095AE940
Socket = 448
Remote addr [public IP of server here], port 56769        <---------------------------
Time Query=2212181, Queued=0, Expire=0
Buf length = 0x0fa0 (4000)
Msg length = 0x0067 (103)
Message:
    XID       0xeef2
    Flags     0xa800
      QR        1 (RESPONSE)
      OPCODE    5 (UPDATE)   <-----------
      AA        0
      TC        0
      RD        0
      RA        0
      Z         0
      CD        0
      AD        0
      RCODE     0 (NOERROR)
    ZCOUNT    1
    PRECOUNT 0
    UPCOUNT   1
    ARCOUNT   0
    ZONE SECTION:
    Offset = 0x000c, RR count = 0
    Name      "(8)domain(2)parentdomain(13)com(0)"
      ZTYPE   SOA (6)
      ZCLASS 1
    PREREQUISITE SECTION:
      empty
    UPDATE SECTION:
    Offset = 0x002f, RR count = 0
    Name      "(10)ServerName(8)domain(2)parentdomain(13)com(0)"
      TYPE   A (1)
      CLASS 254
      TTL    0
      DLEN   4
      DATA   [Private IP here]   <----------------------------------------
    ADDITIONAL SECTION:
      empty

Hi,
Firstly, please refer to the link below to better understand the DNS log:
http://www.zytrax.com/books/dns/ch15/#rdata
In addition, did you mean that the DNS server was multihomed (with two NICs)? If yes, please refer to the links below:
Steps to avoid registering unwanted NIC(s) in DNS on a Mulithomed Domain Controller
http://support.microsoft.com/kb/2023004
How does a DNS query work in a multi-homed PC?
http://social.technet.microsoft.com/Forums/windowsserver/en-US/d0aa6307-41bb-43d1-b918-d9794747958d/how-does-a-dns-query-work-in-a-multihomed-pc?forum=winserverPN
Best regards,
Susie

WISM SEND ALOT OF LOGS MESSAGE

we have WISM module with version 3.2.78.0
we have received huge amount of snmp alerts from WISMs as the follows :
*apfRogueTask: May 18 09:36:07.374: %APF-1-ROGUE_AP_CONTAIN_FAILED: apf_rogue.c:3920 Unable to contain rogue 42:CB:A8:40:36:FB. multicast bit set in BSSID.
*apfOpenDtlSocket: May 18 09:35:33.196: %APF-3-CHECK_SUPP_RATES_FAILED: apf_utils.c:291 Could not check supported rates. Missing Supported Rate. Length :0. Mobile MAC: 00:3a:99:75:5e:c1.
*apfRogueTask: May 18 09:28:48.567: %APF-1-ROGUE_AP_CONTAIN_FAILED: apf_rogue.c:3920 Unable to contain rogue 76:E4:3A:26:DD:9D. multicast bit set in BSSID.
*apfOpenDtlSocket: May 18 09:24:07.587: %APF-3-CHECK_SUPP_RATES_FAILED: apf_utils.c:291 Could not check supported rates. Missing Supported Rate. Length :0. Mobile MAC: 00:3a:99:74:a5:d1.
*apfOpenDtlSocket: May 18 09:21:01.658: %APF-3-CHECK_SUPP_RATES_FAILED: apf_utils.c:291 Could not check supported rates. Missing Supported Rate. Length :0. Mobile MAC: 00:3a:99:75:5c:91.
*apfOpenDtlSocket: May 18 09:20:40.614: %APF-3-CHECK_SUPP_RATES_FAILED: apf_utils.c:291 Could not check supported rates. Missing Supported Rate. Length :0. Mobile MAC: 00:3a:99:75:6b:01.
*apfRogueTask: May 18 09:10:31.727: %APF-1-ROGUE_AP_CONTAIN_FAILED: apf_rogue.c:3920 Unable to contain rogue 92:4E:2B:C7:7D:BE. multicast bit set in BSSID.
*apfRogueTask: May 18 09:08:07.497: %APF-1-ROGUE_AP_CONTAIN_FAILED: apf_rogue.c:3920 Unable to contain rogue 92:4E:2B:2E:36:AF. multicast bit set in BSSID.
*apfOpenDtlSocket: May 18 09:06:07.610: %APF-3-CHECK_SUPP_RATES_FAILED: apf_utils.c:291 Could not check supported rates. Missing Supported Rate. Length :0. Mobile MAC: 00:3a:99:74:a6:91.
*apfRogueTask: May 18 09:05:50.991: %APF-1-ROGUE_AP_CONTAIN_FAILED: apf_rogue.c:3920 Unable to contain rogue 10:0B:A9:86:69:30. multicast bit set in BSSID.
*apfRogueTask: May 18 09:05:23.184: %APF-1-ROGUE_AP_CONTAIN_FAILED: apf_rogue.c:3920 Unable to contain rogue AE:29:37:C9:43:B8. multicast bit set in BSSID.
*apfRogueTask: May 18 09:04:39.986: %APF-1-ROGUE_AP_CONTAIN_FAILED: apf_rogue.c:3920 Unable to contain rogue D4:85:64:91:21:37. multicast bit set in BSSID.
*apfOpenDtlSocket: May 18 08:52:13.205: %APF-3-CHECK_SUPP_RATES_FAILED: apf_utils.c:291 Could not check supported rates. Missing Supported Rate. Length :0. Mobile MAC: 00:3a:99:74:a6:71.
*apfOpenDtlSocket: May 18 08:43:14.232: %APF-3-CHECK_SUPP_RATES_FAILED: apf_utils.c:291 Could not check supported rates. Missing Supported Rate. Length :0. Mobile MAC: 00:3a:99:74:a7:91.
*apfRogueTask: May 18 08:41:26.152: %APF-1-ROGUE_AP_CONTAIN_FAILED: apf_rogue.c:3920 Unable to contain rogue 92:4E:2B:2E:36:AF. multicast bit set in BSSID.
*apfOpenDtlSocket: May 18 08:40:11.516: %APF-3-CHECK_SUPP_RATES_FAILED: apf_utils.c:291 Could not check supported rates. Missing Supported Rate. Length :0. Mobile MAC: 00:3a:99:74:a9:41.
*apfRogueTask: May 18 08:37:55.382: %APF-1-ROGUE_AP_CONTAIN_FAILED: apf_rogue.c:3920 Unable to contain rogue 00:21:00:D8:1A:24. multicast bit set in BSSID.
*apfOpenDtlSocket: May 18 08:34:23.188: %APF-3-CHECK_SUPP_RATES_FAILED: apf_utils.c:291 Could not check supported rates. Missing Supported Rate. Length :0. Mobile MAC: 00:3a:99:75:54:61.
*apfOpenDtlSocket: May 18 08:34:01.761: %APF-3-CHECK_SUPP_RATES_FAILED: apf_utils.c:291 Could not check supported rates. Missing Supported Rate. Length :0. Mobile MAC: 00:3a:99:75:8b:81.
*apfOpenDtlSocket: May 18 08:30:32.870: %APF-3-CHECK_SUPP_RATES_FAILED: apf_utils.c:291 Could not check supported rates. Missing Supported Rate. Length :0. Mobile MAC: 00:3a:99:74:a5:d1.
*apfOpenDtlSocket: May 18 08:25:39.969: %APF-3-CHECK_SUPP_RATES_FAILED: apf_utils.c:291 Could not check supported rates. Missing Supported Rate. Length :0. Mobile MAC: 00:3a:99:74:c0:e1.
*apfOpenDtlSocket: May 18 08:16:48.354: %APF-3-CHECK_SUPP_RATES_FAILED: apf_utils.c:291 Could not check supported rates. Missing Supported Rate. Length :0. Mobile MAC: 00:3a:99:75:5f:11.
*apfOpenDtlSocket: May 18 08:09:09.202: %APF-1-PROC_CLIENT_ASS_RES_FAILED: apf_client.c:1387 Could not process client association response. Missing Information Elements in Association Response.
--More-- or (q)uit
*apfOpenDtlSocket: May 18 08:04:50.982: %APF-3-CHECK_SUPP_RATES_FAILED: apf_utils.c:291 Could not check supported rates. Missing Supported Rate. Length :0. Mobile MAC: 00:3a:99:74:a2:f1.
*apfRogueTask: May 18 07:58:40.678: %APF-1-ROGUE_AP_CONTAIN_FAILED: apf_rogue.c:3920 Unable to contain rogue D4:85:64:91:21:37. multicast bit set in BSSID.
*apfRogueTask: May 18 07:39:00.946: %APF-1-ROGUE_AP_CONTAIN_FAILED: apf_rogue.c:3920 Unable to contain rogue 00:21:00:D8:1A:24. multicast bit set in BSSID.
*apfRogueTask: May 18 07:33:05.673: %APF-1-ROGUE_AP_CONTAIN_FAILED: apf_rogue.c:3920 Unable to contain rogue 00:26:55:60:A5:6B. multicast bit set in BSSID.
*apfRogueTask: May 18 07:11:43.145: %APF-1-ROGUE_AP_CONTAIN_FAILED: apf_rogue.c:3920 Unable to contain rogue 92:4E:2B:2E:36:AF. multicast bit set in BSSID.
*apfRogueTask: May 18 07:09:13.334: %APF-1-ROGUE_AP_CONTAIN_FAILED: apf_rogue.c:3920 Unable to contain rogue 00:1C:C4:01:DB:C9. multicast bit set in BSSID.
*apfRogueTask: May 18 07:07:22.758: %APF-1-ROGUE_AP_CONTAIN_FAILED: apf_rogue.c:3920 Unable to contain rogue D4:85:64:91:21:37. multicast bit set in BSSID.
*apfRogueTask: May 18 06:56:53.033: %APF-1-ROGUE_AP_CONTAIN_FAILED: apf_rogue.c:3920 Unable to contain rogue 42:CB:A8:3F:E0:19. multicast bit set in BSSID.
*apfRogueTask: May 18 06:40:22.552: %APF-1-ROGUE_AP_CONTAIN_FAILED: apf_rogue.c:3920 Unable to contain rogue D4:85:64:91:21:37. multicast bit set in BSSID.
*apfRogueTask: May 18 05:48:14.122: %APF-1-ROGUE_AP_CONTAIN_FAILED: apf_rogue.c:3920 Unable to contain rogue 00:1C:C4:01:DB:C9. multicast bit set in BSSID.
*apfRogueTask: May 18 05:31:26.773: %APF-1-ROGUE_AP_CONTAIN_FAILED: apf_rogue.c:3920 Unable to contain rogue 00:21:00:D8:1A:24. multicast bit set in BSSID.
*apfRogueTask: May 18 05:06:04.209: %APF-1-ROGUE_AP_CONTAIN_FAILED: apf_rogue.c:3920 Unable to contain rogue 00:26:55:60:A5:6B. multicast bit set in BSSID.
*apfRogueTask: May 18 04:57:53.241: %APF-1-ROGUE_AP_CONTAIN_FAILED: apf_rogue.c:3920 Unable to contain rogue 00:21:00:D8:1A:24. multicast bit set in BSSID.
*apfOpenDtlSocket: May 18 04:47:50.565: %APF-3-CHECK_SUPP_RATES_FAILED: apf_utils.c:291 Could not check supported rates. Missing Supported Rate. Length :0. Mobile MAC: 00:3a:99:75:60:c1.
*apfRogueTask: May 18 04:11:07.141: %APF-1-ROGUE_AP_CONTAIN_FAILED: apf_rogue.c:3920 Unable to contain rogue D4:85:64:91:21:37. multicast bit set in BSSID.
*apfRogueTask: May 18 03:26:06.803: %APF-1-ROGUE_AP_CONTAIN_FAILED: apf_rogue.c:3920 Unable to contain rogue 00:21:00:D8:1A:24. multicast bit set in BSSID.
*apfRogueTask: May 18 02:56:06.536: %APF-1-ROGUE_AP_CONTAIN_FAILED: apf_rogue.c:3920 Unable to contain rogue D4:85:64:91:21:37. multicast bit set in BSSID.
*apfRogueTask: May 18 02:35:06.342: %APF-1-ROGUE_AP_CONTAIN_FAILED: apf_rogue.c:3920 Unable to contain rogue D4:85:64:91:21:37. multicast bit set in BSSID.
*apfRogueTask: May 18 02:12:45.215: %APF-1-ROGUE_AP_CONTAIN_FAILED: apf_rogue.c:3920 Unable to contain rogue 00:1C:C4:01:DB:C9. multicast bit set in BSSID.
*apfRogueTask: May 18 01:26:43.789: %APF-1-ROGUE_AP_CONTAIN_FAILED: apf_rogue.c:3920 Unable to contain rogue 00:1C:C4:01:DB:C9. multicast bit set in BSSID.
*apfRogueTask: May 18 01:21:55.670: %APF-1-ROGUE_AP_CONTAIN_FAILED: apf_rogue.c:3920 Unable to contain rogue 00:21:00:D8:1A:24. multicast bit set in BSSID.
*apfOpenDtlSocket: May 18 00:46:05.177: %APF-3-CHECK_SUPP_RATES_FAILED: apf_utils.c:291 Could not check supported rates. Missing Supported Rate. Length :0. Mobile MAC: 00:3a:99:75:54:61.
*apfRogueTask: May 18 00:26:12.752: %APF-1-ROGUE_AP_CONTAIN_FAILED: apf_rogue.c:3920 Unable to contain rogue 00:21:00:D8:1A:24. multicast bit set in BSSID.
we want to know the cause of this log messages and how to solve them quickly.

correct. "use the same format as received" means if the original message was sent as HTML, plain text, or RTF, when you reply or forward, keep the message as HTML, RTF, or plain text.
Some mail programs also have an option to automatically make any forwarded message an attachment instead of allowing your response to be added to the top.
It may not be in options....I just found an article reading:
To forward the message as a message, choose Message > Forward, or click the Forward button in the toolbar. To forward the message as an attachment, choose Message > “Forward as Attachment.”
You can set options for forwarding messages, including whether to quote the text of the original message and increase the quote level, as well as how much of the original text to include. Choose Mail > Preferences, click Composing, and then use the options in the Responding section.
So the as attachment or as inline text may lurking under the Compose preference

WLAN Logging Messages

Hello
we have problems with VoWLAN (connection remains, but you hear nothing).
So I wanted to ask what these messages mean in the LOG. Unfortunately, I found nothing useful on the Internet.
*RRM-CLNT-5_0: Oct 13 13:37:48.027: #RRM-3-RRM_LOGMSG: rrmClientProc.c:2954 RRM LOG: rrmClientProcessPacket:Failure to process RRM_PKT_QUERY: type 1
*RRM-CLNT-5_0: Oct 13 13:37:48.027: #LOG-3-Q_IND: rrmClientProc.c:2954 RRM LOG: rrmClientProcessPacket:Failure to process RRM_PKT_QUERY: type 1
*RRM-CLNT-5_0: Oct 13 13:37:48.027: #RRM-3-RRM_LOGMSG: rrmClientProc.c:2954 RRM LOG: rrmClientProcessPacket:Failure to process RRM_PKT_QUERY: type 1
*RRM-CLNT-5_0: Oct 13 13:37:48.027: #LOG-3-Q_IND: rrmClientProc.c:2954 RRM LOG: rrmClientProcessPacket:Failure to process RRM_PKT_QUERY: type 1
*RRM-CLNT-5_0: Oct 13 13:37:48.027: #RRM-3-RRM_LOGMSG: rrmClientProc.c:2954 RRM LOG: rrmClientProcessPacket:Failure to process RRM_PKT_QUERY: type 1
*RRM-DCLNT-5_0: Oct 13 13:37:48.428: #RRM-3-RRM_LOGMSG: rrmTables.c:682 RRM LOG: Could not retrieve RRM Coverage Measurement DataKey BSSID:9c:4e:20:c8:da:20,Key SlotId:1
*RRM-DCLNT-5_0: Oct 13 13:37:47.580: #RRM-3-RRM_LOGMSG: rrmTables.c:629 RRM LOG: Could not retrieve RRM CCA Measurement DataKey BSSID:0c:d9:96:db:a3:00,Key SlotId:1
*RRM-DCLNT-5_0: Oct 13 13:37:47.578: #RRM-3-RRM_LOGMSG: rrmTables.c:522 RRM LOG: Could not retrieve RRM Noise Measurement Data Key BSSID:0c:d9:96:db:a3:00,Key SlotId:1
*RRM-DCLNT-5_0: Oct 13 13:37:47.577: #RRM-3-RRM_LOGMSG: rrmTables.c:575 RRM LOG: Could not retrieve RRM Foreign Measurement DataKey BSSID:0c:d9:96:db:a3:00,Key SlotId:1
*RRM-DCLNT-5_0: Oct 13 13:37:47.228: #RRM-3-RRM_LOGMSG: rrmTables.c:682 RRM LOG: Could not retrieve RRM Coverage Measurement DataKey BSSID:9c:4e:20:c8:ad:b0,Key SlotId:1
*RRM-DCLNT-5_0: Oct 13 13:37:47.227: #RRM-3-RRM_LOGMSG: rrmTables.c:682 RRM LOG: Could not retrieve RRM Coverage Measurement DataKey BSSID:9c:4e:20:c8:ad:b0,Key SlotId:1
Thanks for you Support
regards Alexander

Refer the 2 BUGs:
Could not retrieve RRM xxxxxx Measurement Data Key SlotId:0/1
CSCuc25956
Description
Symptom:
Customer may see the following messages in the controller msglog
*RRM-DCLNT-5_0: May 01 17:58:09.858: #RRM-3-RRM_LOGMSG: rrmTables.c:629 RRM LOG: Could not retrieve RRM CCA Measurement DataKey BSSID:xx:xx:xx:xx:xx:xx,Key SlotId:1
*RRM-DCLNT-5_0: May 01 17:58:09.857: #RRM-3-RRM_LOGMSG: rrmTables.c:522 RRM LOG: Could not retrieve RRM Noise Measurement Data Key BSSID:xx:xx:xx:xx:xx:xx,Key SlotId:1
*RRM-DCLNT-5_0: May 01 17:58:09.856: #RRM-3-RRM_LOGMSG: rrmTables.c:575 RRM LOG: Could not retrieve RRM Foreign Measurement DataKey BSSID:xx:xx:xx:xx:xx:xx,Key SlotId:1
Conditions:
Controller running 7.4.100.0 with the following APs, but not limited to:
AP1250
AP1130
AP2602
Workaround:
None
RRM AP Neighbor list is not synced to HA Standby after switchover
CSCue17421
Description
Symptom:
After an AP SSO failover to an HA backup WLC, clients are seen to be unable to
associate to an 802.1X enabled WLAN. Wireless sniff of the beacons for the BSSID
shows that the privacy bit is off.
Conditions:
This is seen after the group key rotates on the BSSID.
Workaround:
Reboot the AP.
Known Affected Releases:
(3)
8.0(50.40)
7.4(100.0)
7.4(1.31)

Log Messages from Transaction Event Logger

I have 4 instances of MII v12.1 and within a transaction I want to add a message to the log when the transaction runs so I can view it through the message logger. All 4 MII instances were installed by the same consultant a few years ago so there "should" be no differences in the log configs. On 3 of the instances this is working fine - I have created a very simple transaction with one Event Logger action configured with a message "Test Message" and when I execute the transaction I see the correct entry in the log viewer. On the fourth however, although the transaction executes without error I am not seeing anything in the viewer for this event. I am using the standard "last 24 hours" log viewer with no filters and no specific log locations selected, and no customisations. I am seeing other system generated messages. I found some documentation about logging and the viewer and I found the Netweaver log config but as far as I can see it looks consistent between the instance which is working and the one which is not working. Is there some other config which needs to be done to enable Event Logging from transactions? My user has the same access across all instances. Any guidance would be appreciated. I attach a screen shot of what I am expecting to see (taken from one of the instances which is working).

Hi Partha
Many thanks for your reply. I have tried this and unfortunately it makes no difference. I also checked on the other instances and found they have their tracing levels all set to error, not Info. I have also noticed that on the instance which is working, in the System Configuration section at the bottom of the Log Config page - for Applications and all sub categories I see the entry .\log\applications_00.log in the Pattern column. On the instance which is not working I see that entry for the Applications root but not for any of the sub categories (even after selecting Copy to subtree). I cannot see where I can set this value (there is no modify function available, even under Administrator login).
Also, when I look at the log messages which have generated when setting the Event Type to Error on the instance which is not working, it shows one entry and the Category and Location columns show <com.sap.xmii.bls.executables.action.logging.LoggingActions>. When I generate an event with type Error on the instance which is working I get 2 log messages, one with the Category and Location <com.sap.xmii.bls.executables.action.logging.LoggingActions> and the other with Category /Applications/XMII/Xacute/Event and Location <com.sap.xmii.bls.executables.action.logging.LoggingActions>.
I guess that the .\log\applications_00.log should be showing for all subtree items under Applications and because it is not then the messages are not going into any application log. Not sure how to fix this however.
I have also reset to the default configuration and it does not change the above.
Best Rgds
Richard

GC: meaning / interpreting the log messages of -verbose:gc / PrintGCDetails

Similar Messages

Maybe you are looking for