GE4 MX440 drivers reboot system

Recently put together a new system.
windows 98SE
ga 7n400L mb
XP1900 cpu
Kingston 256mb pc2700 chip
MSI nVidia NV17 GeForce4 MX 440 64mb chip
300 watt psu with 5V@25a, 3.3V@20a
When I load the VGA driver provided on the CD, the system reboots when the Windows 98 screen comes up. I can reload Windows and run at 640X400 but can not use the video card.
The GA 7N400L states it will not run with AGP=2x, but the GF4 MX440 is an AGP=4x card.
Any ideas on how to get around this problem?

The GIGABYTE GA-7N400-L
NVIDIA nForce2 Ultra 400 System Platform Processor
Media and Communications Processor - Turbo (MCP-T)
ATX form factor, 4 layers PCB (30.4 x 20.0)
Socket A for AMD AthlonXP / Athlon / Duron processor
400/333/266 MHz FSB
2M bit flash ROM, Award BIOS
Max capacity: Up to 3GB by 4 DIMM slots
Type:Dual Channel DDR400/ 333/ 266- 184pin
2 x UDMA ATA 133/100/66 Bus Master IDE connectors
5 x PCI slots (PCI 2.2 compliant)
1 x AGP slot (8x/4x-AGP 3.0 compliant), supports 1.5v display card only
Realtek ALC650 Audio AC'97 Codec
4 x USB 2.0/1.1 ports
Realtek 8100C LAN chip
Have I correctly identified your board? If so..
You did not mention the 12v Amperage for your power supply, this is important.
Quote
The GA 7N400L states it will not run with AGP=2x, but the GF4 MX440 is an AGP=4x card.
"AGP 3.0", 1.5v, 8x, 4x, 0.8v
Evidentally it is not "Universal 1.5v AGP 3.0", 1.5v, 8x, 4x, 2x, 1x 1.5v, 0.8v
You need to load the chipset drivers properly and make sure the GART drivers were applied completely before installing VGA drivers.
These factors are probably part of the problem. Please supply the missing information.
Also what version of nVidia Unified drivers are you installing?
I don't recommend 98SE for that rig, the nForce chipset was engineered with XP/2000 in mind and support for 98SE was limited when the nVidia Chipset was born, perhaps they have improved but I am skeptical.
Good luck.

Similar Messages

Abnormal voltage on GE4 MX440-T

I just installed a GE4 MX440-T in my system along with the 3D Turbo application. I've been getting abnormal memory voltage ( from 1.19 to 3.08 ) and temperature warnings after launching the 3D Turbo software.
i'm running a PIII 550
Supermicro board with 2x AGP
sound blaster live
SCSI cd/rw
LG CD-Rom
Nic card
Seagate hard drive
LS-120 floppy drive
PS/2 mouse and keyboard
ATX case with 250 watt PS
Is this a software error or do I really have a power, slot or card issue here.
Help?
Surfer.

i had the exact same problem with my g4mx 440-t card. it gave me voltage and temperature warnings( 3.06 volts) it seems that it is a flaw with the software. no one from the forum gave me a satisfactory reply so i called my vendor and he said that uninstall the soft cos it sometimes show this error. since msi does not help us out in any way so i uninstalled the soft. my card is working well.
specs
pentium 3 800 mhz
asus cusl2-c motherboard
256 mb ram
g4mx 440-t

ALOM stop responding after reboot system

Server info: SunOS 5.9 Generic_118558-08 sun4u sparc SUNW,Netra-440
ALOM version is 1.6.7 and OBP version is 4.22.33
Problem:
After reboot system, ALOM die
found errors in /var/adm/messages
Jan 13 07:04:08 rmclomv: [ID 951689 kern.warning] WARNING: DP_GET_SDP_VERSION failed, ret=4
Jan 13 07:09:53 rmclomv: [ID 647266 kern.warning] WARNING: SC has stopped responding
Jan 13 08:42:33 rmclomv: [ID 647266 kern.warning] WARNING: SC is not responding
Run OS command ./scadm version
scadm: The SC hardware could not be initialized.
Can not connect ALOM through NET MGT and SERIAL PORT.
Run ./ssptest -vn
01/13/09 20:04:04 SunVTS5.1ps10: VTSID 0 ssptest.VERBOSE alom: "ssptest: Started."
01/13/09 20:04:14 SunVTS5.1ps10: VTSID 8025 ssptest.load_rsc_libs.FATAL alom: "Call to rsc_init() failed. Error Code: Interrupted system call." Probable_Cause(s): <The RSC/ALOM is not accepting input and may be hung.> Recommended_Action(s): <Check the RSC/ALOM using rscadm/scadm and reset the RSC/ALOM if required.>
01/13/09 20:04:14 SunVTS5.1ps10: VTSID 5 ssptest.clean_up.VERBOSE alom: Starting Test: cleanup
01/13/09 20:04:14 SunVTS5.1ps10: VTSID 6 ssptest.clean_up.VERBOSE alom: Exiting Test: cleanup
The only way to recover it is Power-off the system, then power-on again.
Don't know what's wrong, why this happened?
Hope you can help me to analyze it. I'm appreciating for your help

El mismo problema.
# prtdiag -v | grep "MB/SC"
MB/SC faulty
# uname -a
SunOS hera 5.9 Generic_122300-09 sun4u sparc SUNW,Sun-Fire-V240
# scadm loghistory
scadm: The SC hardware could not be initialized.
# scadm show
scadm: The SC hardware could not be initialized.
# scadm version -v
scadm: The SC hardware could not be initialized.
/var/adm root@hera # egrep responding messages*
messages:Jul 16 18:49:42 hera rmclomv: [ID 647266 kern.warning] WARNING: SC is not responding
messages:Jul 22 17:26:38 hera sshd[24909]: [ID 800047 auth.crit] fatal: Monitor not responding
messages:Jul 22 17:55:46 hera rmclomv: [ID 647266 kern.warning] WARNING: SC is not responding
Se cicla en la consola serial:
ALOM - POST run incomplete previously, no POST this time
ALOM BOOTMON v1.4.0
ALOM Build Release: 006
Reset register: f0000000 EHRS ESRS LLRS SWRS
Check for Handshake
Returned from Boot Monitor and Handshake
Clearing Memory Cells
Memory Clean Complete
Loading the runtime image...
JRobles - itch.edu.mx

Keep getting this message"Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system." , but cannot view Firefox open window or close it. Have to always reboot system.

Keep getting this message "Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system." However, cannot view open window or close Firefox. Have to always reboot system to access the internet.

For possible causes of this error, and how to troubleshoot it see [[Firefox is already running but is not responding]].

Windows Update Agent rebooting systems after Software Update deployment

I have a software update deployment that is configured to install software updates on a collection of servers at 4:00 AM with a suppressed reboot. The updates get deployed and no reboot occurs as expected. Then ~8 hours later WUA starts up and the
servers get rebooted.
There is a maintenance window applied to the collection from 4:00 AM to 6:00 AM to allow the updates to install.
I've read a few forum and blog posts on this issue and have implemented some settings via GPO, but the reboots are still occurring. The settings that were applied are referenced in the link below.
https://support.microsoft.com/kb/2476479?wa=wsignin1.0
Here is a snippet from the WindowsUpdate.log:
2014-10-22 12:00:26:153 1428 8a88 AU Received AU Resume timeout
2014-10-22 12:00:26:153 1428 8a88 AU Additional Service {117CAB2D-82B1-4B5A-A08C-4D62DBEE7782} with Approval type {Pre-install notify} added to AU services list
2014-10-22 12:00:26:153 1428 8a88 AU Can not perform non-interactive scan if AU is interactive-only
2014-10-22 12:02:08:512 1428 8a88 AU AU received policy change subscription event
2014-10-22 12:16:43:463 1428 8a88 AU ########### AU: Uninitializing Automatic Updates ###########
2014-10-22 12:16:43:479 1428 8a88 WuTask Uninit WU Task Manager
2014-10-22 12:16:43:697 1428 8a88 Service *********
2014-10-22 12:16:43:697 1428 8a88 Service ** END ** Service: Service exit [Exit code = 0x240001]
2014-10-22 12:16:43:697 1428 8a88 Service *************
2014-10-22 12:19:29:728 1428 e584 Misc =========== Logging initialized (build: 7.8.9200.16604, tz: -0400) ===========
2014-10-22 12:19:29:728 1428 e584 Misc   = Process: C:\WINDOWS\system32\svchost.exe
2014-10-22 12:19:29:728 1428 e584 Misc   = Module: c:\windows\system32\wuaueng.dll
2014-10-22 12:19:29:728 1428 e584 Service *************
2014-10-22 12:19:29:728 1428 e584 Service ** START ** Service: Service startup
2014-10-22 12:19:29:728 1428 e584 Service *********
2014-10-22 12:19:29:744 1428 e584 Agent   * WU client version 7.8.9200.16604
2014-10-22 12:19:29:744 1428 e584 Agent   * Base directory: C:\WINDOWS\SoftwareDistribution
2014-10-22 12:19:29:744 1428 e584 Agent   * Access type: No proxy
2014-10-22 12:19:29:744 1428 e584 Service UpdateNetworkState Ipv6, cNetworkInterfaces = 2.
2014-10-22 12:19:29:744 1428 e584 Service UpdateNetworkState Ipv4, cNetworkInterfaces = 2.
2014-10-22 12:19:29:744 1428 e584 Agent   * Network state: Connected
2014-10-22 12:19:29:744 1428 e584 Service UpdateNetworkState Ipv6, cNetworkInterfaces = 2.
2014-10-22 12:19:29:744 1428 e584 Service UpdateNetworkState Ipv4, cNetworkInterfaces = 2.
2014-10-22 12:19:29:791 1428 e584 Agent *********** Agent: Initializing global settings cache ***********
2014-10-22 12:19:29:791 1428 e584 Agent   * Endpoint Provider: 00000000-0000-0000-0000-000000000000
2014-10-22 12:19:29:791 1428 e584 Agent   * WSUS server:
http://Internal-WSUS.Domain:8530
2014-10-22 12:19:29:791 1428 e584 Agent   * WSUS status server:
http://Internal-WSUS.Domain:8530
2014-10-22 12:19:29:791 1428 e584 Agent   * Target group: (Unassigned Computers)
2014-10-22 12:19:29:791 1428 e584 Agent   * Windows Update access disabled: No
2014-10-22 12:19:29:791 1428 e584 Misc WARNING: Network Cost is assumed to be not supported as something failed with trying to get handles to wcmapi.dll
2014-10-22 12:19:29:806 1428 e584 WuTask WuTaskManager delay initialize completed successfully..
2014-10-22 12:19:29:822 1428 e584 Report CWERReporter::Init succeeded
2014-10-22 12:19:29:822 1428 e584 Agent *********** Agent: Initializing Windows Update Agent ***********
2014-10-22 12:19:29:822 1428 e584 DnldMgr Download manager restoring 0 downloads
2014-10-22 12:19:29:838 1428 e584 AU ########### AU: Initializing Automatic Updates ###########
2014-10-22 12:19:29:838 1428 e584 AU Additional Service {117CAB2D-82B1-4B5A-A08C-4D62DBEE7782} with Approval type {Pre-install notify} added to AU services list
2014-10-22 12:19:29:838 1428 e584 AU AIR Mode is disabled
2014-10-22 12:19:29:838 1428 e584 AU   # Policy Driven Provider:
http://Internal-WSUS.Domain:8530
2014-10-22 12:19:29:838 1428 e584 AU   # Detection frequency: 22
2014-10-22 12:19:29:838 1428 e584 AU   # Approval type: Disabled (User preference)
2014-10-22 12:19:29:838 1428 e584 AU   # Auto-install minor updates: No (User preference)
2014-10-22 12:19:29:838 1428 e584 AU   # ServiceTypeDefault: Service 117CAB2D-82B1-4B5A-A08C-4D62DBEE7782 Approval type: (Pre-install notify)
2014-10-22 12:19:29:838 1428 e584 AU   # Will interact with non-admins (Non-admins are elevated (User preference))
2014-10-22 12:19:29:838 1428 e584 AU WARNING: Failed to get Wu Exemption info from NLM, assuming not exempt, error = 0x80240037
2014-10-22 12:19:29:853 1428 e584 AU AU finished delayed initialization
2014-10-22 12:19:29:884 1428 e584 AU #############
2014-10-22 12:19:29:884 1428 e584 AU ## START ## AU: Search for updates
2014-10-22 12:19:29:884 1428 e584 AU #########
2014-10-22 12:19:29:884 1428 e584 Agent SkipSelfUpdateCheck search flag set for serverId: 117CAB2D-82B1-4B5A-A08C-4D62DBEE7782
2014-10-22 12:19:30:416 1428 e584 Report *********** Report: Initializing static reporting data ***********
2014-10-22 12:19:30:416 1428 e584 Report   * OS Version = 6.2.9200.0.0.197008
2014-10-22 12:19:30:416 1428 e584 Report   * OS Product Type = 0x00000008
2014-10-22 12:19:30:416 1428 e584 Report   * Computer Brand = HP
2014-10-22 12:19:30:416 1428 e584 Report   * Computer Model = ProLiant BL460c Gen8
2014-10-22 12:19:30:416 1428 e584 Report   * Platform Role = 1
2014-10-22 12:19:30:416 1428 e584 Report   * AlwaysOn/AlwaysConnected (AOAC) = 0
2014-10-22 12:19:30:431 1428 e584 Report   * Bios Revision = I31
2014-10-22 12:19:30:431 1428 e584 Report   * Bios Name = Default System BIOS
2014-10-22 12:19:30:431 1428 e584 Report   * Bios Release Date = 2014-02-10T00:00:00
2014-10-22 12:19:30:431 1428 e584 Report   * Bios Sku Number = 641016-B21
2014-10-22 12:19:30:431 1428 e584 Report   * Bios Vendor = HP
2014-10-22 12:19:30:431 1428 e584 Report   * Bios Family = ProLiant
2014-10-22 12:19:30:431 1428 e584 Report   * Bios Major Release = 255
2014-10-22 12:19:30:431 1428 e584 Report   * Bios Minor Release = 255
2014-10-22 12:19:30:431 1428 e584 Report   * Locale ID = 1033
2014-10-22 12:19:30:431 1428 e584 AU <<## SUBMITTED ## AU: Search for updates [CallId = {2787252C-D4B8-46B5-BB42-0C616042113C} ServiceId = {117CAB2D-82B1-4B5A-A08C-4D62DBEE7782}]
2014-10-22 12:19:30:431 1428 dae0 Agent *************
2014-10-22 12:19:30:431 1428 dae0 Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-10-22 12:19:30:431 1428 dae0 Agent *********
2014-10-22 12:19:30:431 1428 dae0 Agent   * Online = No; Ignore download priority = No
2014-10-22 12:19:30:431 1428 dae0 Agent   * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1
or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1"
2014-10-22 12:19:30:431 1428 dae0 Agent   * ServiceID = {117CAB2D-82B1-4B5A-A08C-4D62DBEE7782} Third party service
2014-10-22 12:19:30:431 1428 dae0 Agent   * Search Scope = {Machine & All Users}
2014-10-22 12:19:30:431 1428 dae0 Agent   * Caller SID for Applicability: S-1-5-18
2014-10-22 12:19:30:494 1428 dae0 Agent   * Found 0 updates and 0 categories in search; evaluated appl. rules of 0 out of 0 deployed entities
2014-10-22 12:19:30:494 1428 dae0 Agent *********
2014-10-22 12:19:30:494 1428 dae0 Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-10-22 12:19:30:494 1428 dae0 Agent *************
2014-10-22 12:19:30:509 1428 d158 AU >>## RESUMED ## AU: Search for updates [CallId = {2787252C-D4B8-46B5-BB42-0C616042113C} ServiceId = {117CAB2D-82B1-4B5A-A08C-4D62DBEE7782}]
2014-10-22 12:19:30:509 1428 d158 AU   # 0 updates detected
2014-10-22 12:19:30:509 1428 d158 AU #########
2014-10-22 12:19:30:509 1428 d158 AU ## END ## AU: Search for updates [CallId = {2787252C-D4B8-46B5-BB42-0C616042113C} ServiceId = {117CAB2D-82B1-4B5A-A08C-4D62DBEE7782}]
2014-10-22 12:19:30:509 1428 d158 AU #############
2014-10-22 12:19:30:509 1428 d158 AU All AU searches complete.
2014-10-22 12:19:30:525 1428 e584 AU #############
2014-10-22 12:19:30:525 1428 e584 AU ## START ## AU: Search for updates
2014-10-22 12:19:30:525 1428 e584 AU #########
2014-10-22 12:19:30:525 1428 e584 AU Additional Service {117CAB2D-82B1-4B5A-A08C-4D62DBEE7782} with Approval type {Pre-install notify} added to AU services list
2014-10-22 12:19:30:525 1428 e584 Agent SkipSelfUpdateCheck search flag set for serverId: 117CAB2D-82B1-4B5A-A08C-4D62DBEE7782
2014-10-22 12:19:30:525 1428 e584 AU <<## SUBMITTED ## AU: Search for updates [CallId = {A3E41A4C-E9CB-4172-B6B0-99D556FB9102} ServiceId = {117CAB2D-82B1-4B5A-A08C-4D62DBEE7782}]
2014-10-22 12:19:30:525 1428 dae0 Agent *************
2014-10-22 12:19:30:525 1428 dae0 Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-10-22 12:19:30:525 1428 dae0 Agent *********
2014-10-22 12:19:30:525 1428 dae0 Agent   * Online = Yes; Ignore download priority = No
2014-10-22 12:19:30:525 1428 dae0 Agent   * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1
or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1"
2014-10-22 12:19:30:525 1428 dae0 Agent   * ServiceID = {117CAB2D-82B1-4B5A-A08C-4D62DBEE7782} Third party service
2014-10-22 12:19:30:525 1428 dae0 Agent   * Search Scope = {Machine & All Users}
2014-10-22 12:19:30:525 1428 dae0 Agent   * Caller SID for Applicability: S-1-5-18
2014-10-22 12:19:30:525 1428 dae0 Misc Validating signature for C:\WINDOWS\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\wuredir.cab:
2014-10-22 12:19:30:541 1428 dae0 Misc Microsoft signed: Yes
2014-10-22 12:19:30:541 1428 dae0 Misc Infrastructure signed: Yes
2014-10-22 12:19:30:556 1428 dae0 EP Got 9482F4B4-E343-43B6-B170-9A65BC822C77 redir SecondaryServiceAuth URL: "http://fe2.ws.microsoft.com/w81/2/redir/v2-storeauth.cab"
2014-10-22 12:19:30:588 1428 dae0 Agent Checking for updated auth cab for service 117cab2d-82b1-4b5a-a08c-4d62dbee7782 at
http://fe2.ws.microsoft.com/w81/2/redir/v2-storeauth.cab
2014-10-22 12:19:30:588 1428 dae0 Misc Validating signature for C:\WINDOWS\SoftwareDistribution\AuthCabs\Downloaded\117cab2d-82b1-4b5a-a08c-4d62dbee7782.cab:
2014-10-22 12:19:30:603 1428 dae0 Misc Microsoft signed: Yes
2014-10-22 12:19:30:603 1428 dae0 Misc Infrastructure signed: Yes
2014-10-22 12:19:30:775 1428 dae0 Misc Validating signature for C:\WINDOWS\SoftwareDistribution\AuthCabs\Downloaded\117cab2d-82b1-4b5a-a08c-4d62dbee7782.cab:
2014-10-22 12:19:30:791 1428 dae0 Misc Microsoft signed: Yes
2014-10-22 12:19:30:791 1428 dae0 Misc Infrastructure signed: Yes
2014-10-22 12:19:30:791 1428 dae0 Misc Validating signature for C:\WINDOWS\SoftwareDistribution\WuRedir\117CAB2D-82B1-4B5A-A08C-4D62DBEE7782\wuredir.cab:
2014-10-22 12:19:30:806 1428 dae0 Misc Microsoft signed: Yes
2014-10-22 12:19:30:806 1428 dae0 Misc Infrastructure signed: Yes
2014-10-22 12:19:30:822 1428 dae0 EP Got 117CAB2D-82B1-4B5A-A08C-4D62DBEE7782 redir Client/Server URL: "https://fe2.ws.microsoft.com/v6/ClientWebService/client.asmx"
2014-10-22 12:19:30:978 1428 dae0 PT +++++++++++ PT: Synchronizing server updates +++++++++++
2014-10-22 12:19:30:978 1428 dae0 PT   + ServiceId = {117CAB2D-82B1-4B5A-A08C-4D62DBEE7782}, Server URL =
https://fe2.ws.microsoft.com/v6/ClientWebService/client.asmx
2014-10-22 12:19:31:025 1428 dae0 Agent   * Found 0 updates and 0 categories in search; evaluated appl. rules of 0 out of 0 deployed entities
2014-10-22 12:19:31:025 1428 dae0 Agent *********
2014-10-22 12:19:31:025 1428 dae0 Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-10-22 12:19:31:025 1428 dae0 Agent *************
2014-10-22 12:19:31:025 1428 d158 AU >>## RESUMED ## AU: Search for updates [CallId = {A3E41A4C-E9CB-4172-B6B0-99D556FB9102} ServiceId = {117CAB2D-82B1-4B5A-A08C-4D62DBEE7782}]
2014-10-22 12:19:31:025 1428 d158 AU   # 0 updates detected
2014-10-22 12:19:31:025 1428 d158 AU #########
2014-10-22 12:19:31:025 1428 d158 AU ## END ## AU: Search for updates [CallId = {A3E41A4C-E9CB-4172-B6B0-99D556FB9102} ServiceId = {117CAB2D-82B1-4B5A-A08C-4D62DBEE7782}]
2014-10-22 12:19:31:025 1428 d158 AU #############
2014-10-22 12:19:31:025 1428 d158 AU All AU searches complete.
2014-10-22 12:19:31:025 1428 d158 AU AU setting next detection timeout to 2014-10-23 14:19:28
2014-10-22 12:19:36:025 1428 e214 Report REPORT EVENT: {E04012FD-8FFD-4259-96D5-A5A34127F0A0} 2014-10-22 12:19:31:025-0400 1 147 [AGENT_DETECTION_FINISHED] 101 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Software
Synchronization Windows Update Client successfully detected 0 updates.
2014-10-22 12:19:36:025 1428 e214 Report CWERReporter finishing event handling. (00000000)
2014-10-22 12:29:29:914 1428 e584 AU AU invoking RebootSystem (OnRebootNow)
2014-10-22 12:29:30:055 1428 e584 AU Allowing auto firmware installs at next shutdown
2014-10-22 12:29:30:102 1428 e584 Misc WARNING: SUS Client is rebooting system.
2014-10-22 12:29:30:102 1428 e584 AU AU invoking RebootSystem (OnRebootRetry)
2014-10-22 12:29:30:367 1428 e584 Shutdwn Checking to see whether install at shutdown is appropriate
2014-10-22 12:29:30:367 1428 e584 Shutdwn user declined update at shutdown
2014-10-22 12:29:30:367 1428 e584 AU AU initiates service shutdown
2014-10-22 12:29:30:367 1428 e584 AU ########### AU: Uninitializing Automatic Updates ###########
2014-10-22 12:29:30:399 1428 e584 WuTask Uninit WU Task Manager
2014-10-22 12:29:30:445 1428 e584 Agent Sending shutdown notification to client
2014-10-22 12:29:30:445 5788 8084 COMAPI WARNING: Received service shutdown/self-update notification.
2014-10-22 12:29:30:461 1428 e584 Report CWERReporter finishing event handling. (00000000)
2014-10-22 12:29:30:539 1428 e584 Service *********
2014-10-22 12:29:30:539 1428 e584 Service ** END ** Service: Service exit [Exit code = 0x240001]
2014-10-22 12:29:30:539 1428 e584 Service *************
Any assistance is appreciated.
-Tim

Hi,
Any update?
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Rebooting system due to exception

Hi,
I've recently installed LabVIEW 2010 and re-deployed an RT exe which worked fine in LabVIEW 2009. The RT system now works for a bit and then crashes, giving the error message:
Rebooting system due to exception
Flushing disk cache....
Attached is the rtlog error file generated, any ideas how I interpret this file?
Thanks for looking,
Sarah
Attachments:
rtlog.txt ‏15 KB

Hi Robert,
Yes, I've had this set up working with LabVIEW 2009.
It's a real-time PXI and every time it crashes I have to format the disk and reinstall the software through MAX.
It currently has the following installed:
AMD AM79C972 10/100Mbps Ethernet Driver 1.0.0.3.0
Broadcom 57xx Gigabit Ethernet Driver 3.0.0.3.0
HTTP Client 1.1
LabVIEW Real-Time 10.0
Language Support for LabVIEW RT 1.0.0.3
Network Variable Engine 1.7.0
NI System Configuration 1.1.3
NI System Configuration network support 1.1.2
NI Web-based Configuration and Monitoring 1.0.0
NI-DAQmx 9.2.3
NI-Sync 3.2.1
NI-VISA 5.0
Remote Panel Server for LabVIEW RT 3.0.0
Run-Time Engine for Web Services 3.0.0
Variable Client Support for LabVIEW RT 1.7.0
Is there anything obvious missing?
Many thanks,
Sarah

Reboot System

if i reboot system, printer will in need for calibration?

To get your issue more exposure I would suggest posting it in the commercial forums since the HP Scitex FB500 Industrial Printer is a commercial product. You can do this at Commercial Forums.
I hope this helps!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

NVidia drivers cause system instability

Hello,
I recently purchased an MSI 865 Neo2 FIS2R mother board. Here is how
I have it configured:
o Power Supply - FSP400-60PFN 400W (3.3V/28A, 5V/40A, 12V/15A, 5VSB/2A,
-5V/0.3A, -12V, 0.8A)
o Processor - 2.8GHz P4
o RAM - 2 512MB PC3200 Kingston HyperX CL2
o RAID 0 - 2 Maxtor DiamondMax 9 Plus SATA drives.
o Video - Aopen GF3Ti500
o Primary IDE Master - TDK Indi DVD 440N
o Secondary IDE Slave - 56X CDROM Drive
o Floppy Drive
I installed Windows XP on the RAID without incident. When I tried to
install the NVidia display drivers (45.23), the system became
unstable. Specifically here is what I noticed:
o The black Windows start-up screen with the blue progress bar would
flicker between black & blue around the same spot each time.
o From the login screen, when I chose my account, it would
briefly show my desktop and then I would hear the relays in my monitor
click, the screen go black, a second click and my screen would be fine
again.
o If I used the display properties control panel and chose the
advanced option, again, click, blackness, click, everything's OK.
o I noticed that when I tried to use Window's Media player to play a
CD, it would crash during the 2nd song. It would crash sooner and
sooner each time I restarted it until it was crashing as soon as I
started it (assuming I didn't reboot). After than IE would crash,
Windows Explorer might crash or the system might spontaneously reboot.
o After rebooting, the system would be less stable, with IE or Windows
explorer crashing sooner than before (without even using Media Player).
This would continue to get worse (across re-boots) until it would
start crashing while loading Windows XP.
MAT and DOT are in the default setting and I have not tried adjusting
any voltages, etc.
If I booted in safe mode and uninstalled the display driver, everything
would return to normal and the system would run fine. I checked the
IRQs to make sure that wasn't a problem. I noticed a device from the
Intel Chipset and the VGA card were both sharing IRQ 16. I don't know
much about this (including how to change an IRQ) so I tried disabling
the Intel device (it dealt with the USB and I have no USB devices
currently attached). The system didn't seem to mind having that device
disabled. I reinstalled the display drivers, but the system behaved
exactly the same.
I also tried stepping down to the 44.03 version of the drivers but
they actually made the system worse (my screen split in half and
things turned purple!).
I also tried swapping between the GF3Ti500 and a GeForce4 MMX 440 The
only difference is that while starting windows, the monitor would
briefly go black instead of flickering between black and blue. Both
cards run fine in my old machine, an MSI NForce mobo, using the
45.23 drivers.
Since the problems usually started when I was using Media Player, I
tried disabling the sound device. The system seemed to run fine (with
the exception of the monitor clicking). I could play movies with the
media player, browse with IE, etc. with no crashes. I couldn't find
any resources conflicts between the sound and the vga card.
Windows trouble shooter suggested updating the mobo BIOS. I was
previously running 1.3. I tried updating to 1.7. The reflash seemed
to go fine. But when I rebooted, all I got was a black screen (no
beep). I looked at the D-Bracket and noticed that it was stuck on the
RTC test. I don't think that's the problem. The next step is
initialization of the video system. I tried the emergency recovery
procedure (with the 1.7 BIOS). It worked, but still the screen
remained black, stuck on the same test.
How do I get (either) video card to work? And should I just leave the
system flashed to 1.7, or try to use the emergency recovery program to
get back to 1.3?
Thanks in advance!

Hey Guys. Thanks for the help. I don't doubt that the NVidia drivers are fine, they're just part of the puzzle. Just to be sure, I got a new PSU. Here are it's specs:
+5V/40A, +12V/24A, +3.3V/32A, -5V/-0.5A, -12V/1.0A, +5V SB/2A, max load 530W.
As I mentioned earlier, I had tried updating the BIOS to 1.7, after which it sticks on the RTC test (see my original post for details). After installing the new PSU, it still stuck on the RTC test. I tried reflashing to 1.3, but now the memory test is failing. Does that seem right? The RTC test is after the memory test, so why should reflashing to 1.3 cause a memory failure? I'm assuming the reflash didn't work correctly. If I can get it to work (fingers crossed) I'll let you know what happens.

Windows Server 2003 R2 32bit keeps unexpectedly rebooting - System Stop Failure

Good morning all,
I am currently having a very difficult time with my servers running Windows Server 2003 R2 32Bit SP2. I have had this server running over night last night and to come in this morning to find it has rebooted 4 times due to unexpected reboots. I have applied
the latest hotfix to this server but nothing has worked. This is a unknown server as its my companys branded. its got a 13 slot PCI backplane with a processor card running a i7 2600K with 4GB RAM. The processor card is called a ROBO-8780. I have got 5 HDD's
first 2 is RAID 1 which hold the OS and last 3 is RAID 5 which holds the data.
I am getting loads of different problems aswell on different servers where on a freshly build OS of Windows Server 2003 R2 32Bit SP2, its rebooting on the Windows splash screen, can sometimes get into safe mode but very rarely.
If you need any more information, please let me know, any help is appreciated!
Thanks

Hi,
Could you offer us the system log record information,Please do the following action then monitor again.
1. Run Windows Update and make sure you have the latest patches and service packs installed
2. Check so your server have the latest drivers installed from the manufacturer homepage. If not, please update your drivers, firmware and BIOS
3. Uninstall any Antivirus.
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Often can't open Lightroom 3 after going from Leopard to Snow Leopard with out rebooting system...

Ever since I upgraded to snow leopard a month ago or more it seems I can't open Lightroom when I'm ready to run the program without having to restart my computer. This is happening on both my macbook and my new mac mini. I keep my Lightroom catalog on an external hard drive so I can access it from either computer and have an alias stored on both computers that used to open my program when my external was plugged in and ready. I've also noticed since upgrading I'm unable to upload photos from my memory card reader without a lot of fussing around - often needing to reboot to get the import to happen in Lightroom, or just uploading my photos to my desktop without having Lightroom open, then once they're finished uploading I can import and move them into my Lightroom 3 program/catalog/photo storage. Does anyone have any idea why this is happening? Or what I might need to do to fix these problems?

I think I would look at if you have the latest Parallels;
clone and backup your system and files before doing anything;
boot off 2nd hard drive and run Apple First Aid + (Disk Warrior or DG3 or TechTool Pro 5).
Always be prepared to be able to restore your system to prior point, that could even mean keeping 10.6.4 around for a month until you know 10.6.5 and 3rd party software and drivers all play nice together.
Bottom line: invest in two backup sets and methods; a copy of SuperDuper or CCC; and Disk Warrior.
I've used VBox, Fusion but not Parallels, plus Windows XP Mode, VHDs and VMs under Windows Vista/7.
I'd go back to ERASE and INSTALL and then do all your updates, then start on 3rd party with main packages first (CS5 and others). Off load, save, backup everything and anything you might need first of course.
Last but actually #1: a small 30GB OS X 10.6.5 drive volume (can take the 30GB from one of your backup drive is fine) so you can run the latest DU plus other system maintenance (DVDs get old, out of date, slow to boot, can't use Finder and other programs).

Cannot reboot system

Hi
I have a Sunfire 280R running with Solaris 8.
I was installing a patch, when the system panicked.
Since, it cannot access the boot area. I tried to select genunix instead of unix, but same error.
I then rebooted from the OS CD using boot cdrom -s and was able to mount /dev/dsk/c1t0d0s1. the files and directories seems to there.
Which makes me think that the problem is probably with the drivers to access the disk at boot time.
What would be the best way to get myself out of this mess?
Thanks
Vincent

If you where installing a patch when the system crashed, some of the files might have been corrupted. Try to boot -s from the cd-rom and then re-install the patch from there..
.7/M.

Pioneer BDR-202 hard reboots system in Encore CS3

I am having a problem where Encore CS3 hard reboots when building my project at the point where it starts to actually write data to disc. The weird thing is it works absolutely fine with a BD-RE and will not work at all with BD-R media from the same manufacturer (TDK). I've tried creating an image and then burning, and it still happens. I'm not sure what's wrong and I really don't want to be stuck with a drive that only does BD-RE's (which we just ended up having to send to a client).
After the system hard reboots, Windows XP comes back up stating it recovered from a serious error and when I look into the error it appears device driver related, though it doesn't say exactly which driver. I've also tried using IMGBURN software and the Roxio software that came with the drive and I get the same problem.

Windows XP does not support Blu-ray natively. In fixing that problem, I suspect that either anydvd or powerdvd may have installed bits that are causing your problem with Encore.
To meet your deadline, create a Blu-ray image in Encore, and then burn it using ImgBurn:
http://www.imgburn.com/
Then, when you have time - try to troubleshoot your system to find out why Encore doesn't see the Blu-ray drive correctly.

Bluetooth drivers prevent system from sleeping in Mavericks - what's going on!?

Just installed Mavericks. My iMac 27" no longer engages the screensaver or puts the monitor to sleep as specified in preferences as a result. When I enter pmset -g assertions in Terminal, I get the following:
10/22/13, 11:03:40 PM PD
Assertion status system-wide:
   BackgroundTask                 0
   PreventDiskIdle                0
   ApplePushServiceTask           0
   UserIsActive                   1
   PreventUserIdleDisplaySleep    0
   InteractivePushServiceTask     0
   PreventSystemSleep             0
   ExternalMedia                  1
   PreventUserIdleSystemSleep     0
   NetworkClientActive            0
Listed by owning process:
   pid 16(powerd): [0x0000000900000131] 00:19:12 ExternalMedia named: "com.apple.powermanagement.externalmediamounted"
   pid 49(hidd): [0x0000000a00000194] 00:15:51 UserIsActive named: "com.apple.iohideventsystem.queue.tickle"
          Timeout will fire in 1170 secs Action=TimeoutActionRelease
Kernel Assertions: 0x10c=USB,BT-HID,MAGICWAKE
   id=500 level=255 0x4=USB mod=10/22/13, 10:53 PM description=EHC2 owner=AppleUSBEHCI
   id=503 level=255 0x8=BT-HID mod=12/31/69, 4:00 PM description=com.apple.driver.IOBluetoothHIDDriver owner=BNBTrackpadDevice
   id=504 level=255 0x8=BT-HID mod=12/31/69, 4:00 PM description=com.apple.driver.IOBluetoothHIDDriver owner=AppleBluetoothHIDKeyboard
   id=505 level=255 0x100=MAGICWAKE mod=12/31/69, 4:00 PM description=en1 owner=en1
I'm not terribly concerned with "ExternalMedia" as that always appeared in Mountain Lion as well but never actually prevented my system from putting the monitor to sleep. My concern is with the "UserIsActive" item as it appears to refer to "MAGICWAKE" (a google search only shows an app that I do not have installed and sheds no light on what it means in this context) and points directly to my keyboard and trackpad. Oddly, turning "Allow Bluetooth devices to wake this computer" in the Bluetooth advanced preferences does not change this, nor does rebooting. The countdown that appears here is always in the 1160 to 1195 range. I'm completly stumped...

I have the same problem, but i cannot solve yet.
I have to wait almost 2 minutes for sleep mode when i close the screen
If i click sleep in the main menu is the same problem.
This is my log
Assertion status system-wide:
   BackgroundTask                 0
   PreventDiskIdle                0
   ApplePushServiceTask           0
   UserIsActive                   1
   PreventUserIdleDisplaySleep    0
   InteractivePushServiceTask     0
   PreventSystemSleep             0
   ExternalMedia                  0
   PreventUserIdleSystemSleep     0
   NetworkClientActive            0
Listed by owning process:
   pid 46(hidd): [0x0000000a00000269] 00:04:16 UserIsActive named: "com.apple.iohideventsystem.queue.tickle"
          Timeout will fire in 108 secs Action=TimeoutActionRelease
   pid 323(apsd): [0x0000000c000002ee] 00:00:07 ApplePushServiceTask named: "com.apple.apsd-connectinguser-sandbox.push.apple.com"
   pid 323(apsd): [0x0000000c000002ec] 00:00:12 ApplePushServiceTask named: "com.apple.apsd-connectinguser-push.apple.com"
No kernel assertions.
I am hoping a soon solution

After holding c key while rebooting system I do not have an acces to choice of installing mac os from dvd

Hello,
I just wanted to upgrade my Mac OS from Tiger 10.4.11 to a Leopard 10.5 (I run PowerMac G5 Dual 2.0GHz) and I experienced a little problem. To boot computer from the genuine retail Leopard 10.5 DVD I am suppose to hold down the 'option' or 'c' key while restarting computer. So I do it and what only happens is the little icon representing my main hard drive called Macintosh HD appears in the center of the screen and an arrow button (which after clicking it starts my OS previously installed) and also 'refresh' button ( an arrow curved to the left with the shape of a circle). I do not have any other additional option to choose or buttons to click. I must also say that I do have another hard drive plugged inside the power mac which works fine under the tiger system. It is normally visible and usable while I am working with the system. But after holding C button while restarting computer only one hard drive is visible whose icon appears on the screen. The same situation is while trying to reboot computer from USB stick. It simply doesn't work.
Can anyone help me to make my system upgrading possible.
THX
Paul

Hi Paul,
Very few PPC Macs can boot OSX from USB.
What happens if you choose System Preferences>Startup Disc & select The 10.5 Install Disc to boot from?
Might be time to replace the PRAM Battery, 4 years is close to their lifespan, far less if ever without AC power, & can cause strange startup problems...
See which one your G5 has...
http://eshop.macsales.com/item/Newer%20Technology/CR2032/
http://eshop.macsales.com/item/Newer%20Technology/BAA36VPRAM/

Reboot system after installing patches

Hi all,
My ZLM server executes two remote policies. The first one it registers the device to the catalog and the second policy is used to install patches using rug up -y.
Few questions:
a) There 's any way to reboot the systems automatically after aplying all the updates?
b) I have found this document Cool Solutions: SLE10: Apply Updates Without New Kernel Updates Being Applied .Is it the best way to dont install the kernel related patches? Or there is any other way?
Thanks in advance
Franc

Hi Franc,
Originally Posted by FIATC
Hi all,
My ZLM server executes two remote policies. The first one it registers the device to the catalog and the second policy is used to install patches using rug up -y.
Few questions:
a) There 's any way to reboot the systems automatically after aplying all the updates?
b) I have found this document Cool Solutions: SLE10: Apply Updates Without New Kernel Updates Being Applied .Is it the best way to dont install the kernel related patches? Or there is any other way?
Thanks in advance
Franc
b) you could "split" your zlmmirror proze. In the first you exclude the kernel patches
Code:
<ExcludeBundle>patch-.*kernel.*</ExcludeBundle>
<ExcludePackage>kernel.*</ExcludePackage>
and in the second you mirror only the kernel patches
Code:
<Bundle>patch-.*kernel.*</Bundle>
<Package>kernel.*</Package>
Hope that helps.
dgu

GE4 MX440 drivers reboot system

Similar Messages

Maybe you are looking for