General question after installation

hi people
my url for the em grid control
https://server:1159/em/
how can i change this to http
one more question
in the portlist.ini of the agent10g i see only this two entries
i'm not sure whether this are all entries and i think the second is not right
Oracle HTTP Server Diagnostic port = 7201
Enterprise Manager Central Agent Port = %EM_SERVLET_PORT%
i must configure the oms manuel with this statement
runConfig ORACLE_HOME= D:\OracleHomesGrid\oms10g ACTION=configure
MODE=perform
i do this only for oms not for the agent because
D:\OracleHomesGrid\oms10g\BIN>emctl status agent
Oracle Enterprise Manager 10g Release 3 Grid Control
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
Agent Version : 10.1.0.4.2
OMS Version : Unknown
Protocol Version : 10.1.0.2.0
Agent Home : D:\OracleHomesGrid\oms10g
Agent binaries : D:\OracleHomesGrid\oms10g
Agent Process ID : 4700
Agent Process ID : 4700
Agent URL : http://server:18120/emd/main/
Started at : 2007-04-11 10:40:45
Started by user : SYSTEM
Last Reload : 2007-04-11 10:40:45
Last successful upload : (none)
Last attempted upload : (none)
Total Megabytes of XML files uploaded so far : 0.00
Number of XML files pending upload : 0
Size of XML files pending upload(MB) : 0.00
Available disk space on upload filesystem : 35.18%
Agent is Running and Ready
the next shows me that
D:\OracleHomesGrid\agent10g\BIN>cd D:\OracleHomesGrid\oms10g\BIN
D:\OracleHomesGrid\oms10g\BIN>emctl status oms
Oracle Enterprise Manager 10g Release 3 Grid Control
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
Oracle Management Server is Up.
why show me the first output
the agent version 10.1.0.4.2
and oms version unknown
i have installed grid-control 10.2.0.2
und upgraded it to 10.2.0.3
but on the other side there is this output
D:\OracleHomesGrid\agent10g\BIN>emctl status agent
Oracle Enterprise Manager 10g Release 10.2.0.2.0.
Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
Malformed URL: http://server:%EM_SERVLET_PORT%/emd/main/
Error connecting to http://server:%EM_SERVLET_PORT%/emd/ma
in/
must i also configure the agent manuell
how i configured the oms

the first i have done
is to upgrade the agent to 10.2.0.3 at the agents-home D:\OracleHomesGrid\agent10g
how the upgrade-documentation it says
the assitent of the universal installer had done it succesful (with configuration of the agent) but i still have a
problem
D:\OracleHomesGrid\oms10g\BIN>emctl status agent
Oracle Enterprise Manager 10g Release 3 Grid Control
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
Agent Version : 10.1.0.4.2
OMS Version : Unknown
Protocol Version : 10.1.0.2.0
Agent Home : D:\OracleHomesGrid\oms10g
Agent binaries : D:\OracleHomesGrid\oms10g
Agent Process ID : 4700
Agent Process ID : 4700
Agent URL : http://server:18120/emd/main/
Started at : 2007-04-11 10:40:45
Started by user : SYSTEM
Last Reload : 2007-04-11 10:40:45
Last successful upload : (none)
Last attempted upload : (none)
Total Megabytes of XML files uploaded so far : 0.00
Number of XML files pending upload : 0
Size of XML files pending upload(MB) : 0.00
Available disk space on upload filesystem : 35.08%
Agent is Running and Ready
the first i don't understand is this
Agent Version : 10.1.0.4.2
OMS Version : Unknown
and the next
D:\OracleHomesGrid\agent10g\BIN>emctl status agent
Oracle Enterprise Manager 10g Release 3 Grid Control 10.2.0.3.0.
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
Malformed URL: http://server:%EM_SERVLET_PORT%/emd/main/
Error connecting to http://server:%EM_SERVLET_PORT%/emd/ma
in/
so what is the difference between the call from this dictionary D:\OracleHomesGrid\oms10g\BIN>emctl status agent
and the call from this place D:\OracleHomesGrid\agent10g\BIN>emctl status agent
Error connecting to http://server.de:%EM_SERVLET_PORT%/emd/ma
in/
this %EM_SERVLET_PORT% is the parameter from D:\OracleHomesGrid\agent10g\install
what must i do to configure this
is it possible that i only write it over with the right port-number
or does this action do it for me (suggestion of mnazim)
open emd.properties locate emd_url provide hostname and port
and run agentca -f fro AOh\bin
is the emd_url in the emd.properties in the agent10g-home like the emd_url in the emd.properties in the oms10g-home

Similar Messages

Questions after installation

Hello,
I setup a new wsus 3.0 sp2 server in my domain.
everything is good,but i don't understand how to setup a update policy for computer groups.for example,i want to determine that server groups will only download updates,but not to install,and on the other end,station will automatically will be updated.
How do i know that computers was updated ?
Is it possible that wsus will work automatically without intervention of me ?
Is there articles for that issues ?
Thank's
Giyora

but i don't understand how to setup a update policy for computer groups.
Product Documentation is your best friend.
See
Update and Configure the Automatic Updates Client in the WSUS Deployment Guide.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

After installation Mountain Lion, when saved in map content in disorder

Hello anyone,
I haven a question, after installation Mountain Lion, when saved an item in a folder the content of the folder is disarranged, everthing is in disorder!
Not always but now and again, anyone know what to do?
thanks, Ron

You need to look in your user Library/Preferences for the .plist. Hold down the option key while using the Finder “Go To Folder” command. Enter ~/Library/Preferences/com.apple.finder.plist. Delete the .plist.
Force quit Finder (command - option-esc). Hopefully the changes will now be permanent.
http://osxdaily.com/2011/07/04/show-library-directory-in-mac-os-x-lion/
You might want to bookmark the command. I had to use it again after I installed 10.8.4. I have also been informed that if you drag the user library to Finder it will remain visible.
Since the problem only occurs randomly, the only test will be time.

I upgraded the OS on my iMac to Lion from the App store; and after installation, it restarted and now the operating system won't start up.... it keeps displaying the apple/folder with a question mark and a circle with a line through it! Please help!

I upgraded the OS on my iMac to Lion from the App store; and after installation, it restarted and now the operating system won't start up.... it keeps displaying the apple/folder with a question mark and a circle with a line through it! Please help!

Try starting up with your Snow Leopard DVD and see if the disk can be repaired. Once you are at the installer screen go to the Utilities Menu and choose Disk Utility and choose repair disk. You might also want to try Diskwarrior.
Hope this helps.
Ben

Messaging 6.x general questions

hi,
just some general questions -
(a) is there a netbackup agent for doing messaging backups and message level restores (e.g. like the one for exchange). I know solstice backup has a backup agent somewhere but not sure about netbackup. any experiences with this?
(b) is it possible for messaging/calendar to authenticate users off a different directory? i.e. just use the uid/password info from another directory i.e. novell edir. it seems like directories and ldap were supposed to make all this simple, but getting a product like messaging that is "supported" against another directory isn't in reality.
Also organisations don't seem to like having to only use messaging against sun directory as a selling point sometimes when they already have a directory. Any thoughts/experiences?
thanks

A: imsbackup may be used with many backup packages. Granularity down to the individual user. Imsbackup/imsrestore is the recommended backup/restore technique.
B: No. Messaging Server was not designed to store part of the authenticatio data in one ldap and the rest in another. You could use Meta Directory to synchronize a portion of your other ldap to the one Messaging uses.
Some customers have successfully deployed against other Directory server, BUT . . .
1. The installer uses non-standard, propriatary stuff, and will fail against non-sun directory servers.
2. If there is a problem after ou successfully get install done, and you call tech support, the burdon is on you to prove that the problem is within how Messaging Server works, and is not with the non-sun directory server. So far, we haven't found any such to fix, though. I think there may be one or two customers using non sun DS.
In most cases, Meta is able to sync their ldap system with ours, and that works much better. Directory Server is the most popular LDAP server around, far as I know.

General questions on IDOCs and IDOCs for 2 Accounting Interface BAPIs

This post involves several questions pertaining to the topic of IDOC creation. I downloaded a couple of PDFs and tried googling for material on that, but things are far from being clear in my mind.
I tried to put my questions in some order, so we can follow a line of reasoning. Here we go, then:
I have one code where I there are calls to 2 BAPIs:
- BAPI_ACC_ACT_POSTINGS_REVERSE and
- BAPI_ACC_GL_POSTING_REV_POST
I am supposed to prepare/create an IDOC to perform the activities these BAPIs are responsible for, for the sole purpose of providing us much more details on the activities being executed in the system - this is one of the IDOC's features, if I got it right, its highly detailed logging of everything that is going on behind.
Now, the 1st question arises:
From the material I read, I understood that IDOCs are nothing more than data containers, whose sole purpose is to provide a means of communication between two different systems/parties - one of them would usually be SAP. If this is right, than what sort of IDOC would be this one I am supposed to build - if there's not going to be any inter-system communication ? Doesn't it sound strange that pure "data containers" can work as "logging functions" ? Please share some light here.
The 2nd question - after I understand what an IDOC really is - is
then connected to the job I have to do. I found 2 IDOCs which I think have the proper/correspondent basic types for the 2 aforementioned BAPIs. They are, respectively:
- ACC_DOCUMENT_REVERSE01 and
- ACC_GL_POSTING_REVERSE01
Getting back to my understanding of IDOCs, I got that every IDOC is generally made of one control record, data record(s), and status record(s). 3rd question: Where do the segments fit in ? Are the segments definitions of the Data Records ? And why is it that some IDOC types have header segments only and others doesn't have one ? (header segments are not the same as control records, right ?)
Finally, what is the general process flow for creating/preparing an IDOC ? I looked over a couple of forum posts about this but some of them differ one from another in the order of the steps, some don't mention this or that step, so I am still confused.
4th and last question: what comes first ? The definition of a partner, the bonding of a message type with an IDOC basic type, definitions of the inbound/outbound interfaces ?
Any help here would be highly appreciated.
Thanks in advance,
Avraham

Hi Jaya,
Answer 1. Class is a template for creating objects. Object can also be called as instance.
Interfaces allow you to use different classes in a uniform way (polymorphism).
Answer 2. Normal abap is a procedural programming where as by using abap objects we can achieve object oriented programing.
Answer 6. Source code:
In below code i have created a interface and a class which is implementing the interface. I have declared a reference variable of type interface and created a object. Then i have called a method.
REPORT ZABAPOBJECTS_INTERF.
      INTERFACE I1
INTERFACE I1.
METHODS METH1.
ENDINTERFACE.                    "I1
      CLASS C1 DEFINITION
CLASS C1 DEFINITION.
PUBLIC SECTION.
    METHODS: METH2.
    INTERFACES: I1.
ENDCLASS.                    "C1 DEFINITION
      CLASS C1 IMPLEMENTATION
CLASS C1 IMPLEMENTATION.
METHOD I1~METH1.
    WRITE: / 'This is a method one'.
ENDMETHOD.                                                "I1~METH1
METHOD METH2.
    WRITE: / 'This is a method two'.
ENDMETHOD.                                                "METH2
ENDCLASS.                    "C1 IMPLEMENTATION
START-OF-SELECTION.
DATA : REF1 TYPE REF TO I1.
CREATE OBJECT REF1 TYPE C1.
CALL METHOD REF1->METH1.
Question 7: Yes we need to create a class but most probably we use the existing classes.
Regarding BAPi's go through the below links,
http://www.sapgenie.com/abap/bapi/example.htm
http://www.sapdevelopment.co.uk/bapirfc/bapirfchome.htm
Regards,
Azaz Ali.

I cannot connect to the Internet after installation of Windows Vista Ultimate edition.

I cannot connect to the Internet after installation of Windows Vista Ultimate edition. For some odd reason, it seems my ethernet has not yet been installed to my operating system and I do not know how to do that even with the internet, I have the LAN cable hooked up to my computer but I do not know exactly what to do about it. Is there some sort of driver I need to install, or what? How do I do that without the internet?
This operating system is on a separate partition to my other operating system that is connected to internet already (Windows Vista Premium) that I do not wish to use anymore because of it's corruption. I tell you this because you may know a way of finding the driver files on my previous operating system that I may be able to transfer to the other.

In order to avoid board clutter, we ask that you post your topic on one board only.
Please look ---> HERE for replies to your topic. Thank you.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer that solved your issue as the accepted solution.

Where to direct a general questions about foreign films subtitles?

I recently purchased a foreign film "Break Ke Badd" from the iTunes store. Although, it didn't specify that it had English subtitles, I assumed it did. After the full download, I tried to watch it and there weren't any English subs. I contacted iTunes and they more than happy to refund the money back to my account. Now after a few weeks, the iTunes store DOES list Eng subs for this film. I don't want to purchase it again and have to contact iTunes for another refund...Therefore my question is, is there a general question contact one could use to find an answer to my question. Basically, to verify that this movie, indeed has English subs before I re-purchase.
Any info is appreciated!

Yes I know as the [https://support.mozilla.org/en-US/questions/ Questions] section is more for desktop Firefox support and the place I linked to is for "Firefox OS" support in English where some who are involved with it do post in it occasionally.
I would have moved that [https://support.mozilla.org/en-US/questions/962783 thread] to the "Firefox OS" English section, however I cannot as the [https://support.mozilla.org//questions/ Questions] and [https://support.mozilla.org/forums Contributor Forums] are not the same.

Camileo charging problem (solved) and a general question!

Hi all!
First of all, I was going to ask for help as to why the Camileo S10 was not charging (the orange light wasn't flashing), and I'd seen a few people with similar problems.
The solution?
Give the contacts on the battery a clean.
The insulation sticker that comes on it must leave some kind of residue on it, and it's enough to prevent charging. Now it's flashing away happily :]
So my general question was, is it possible/advisable to use the camera on the mains?
Rather than constantly draining and charging the battery during long shoots, I'd prefer to just leave it plugged in!
Thanks very much in advance!
Paul

Hi
I think the battery handling is always the same no matter what product it is
From time to time the battery should be recalibrated.
This means that the battery should be discharged fully and after then you should charge it again until the battery would reach 100%
I do this with all my batteries; mobile phone battery, digi cam battery and notebook battery.

Whenever i open itunes after installation it says error 7 itunes was not installed correctly

whenever i open itunes after installation it says error 7 itunes was not installed correctly

For general advice see Troubleshooting issues with iTunes for Windows updates.
The section Install missing components may allow you to install Apple Application Support.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If the advice above doesn't resolve things you could try this alternate version:
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
Or roll back to the previous build:
iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
tt2

CAN'T ABLE TO STARTUP AFTER INSTALLATION

Dear Legends,
I have a new THINKPAD EDGE430 COREi5 64bit WITH 8GB RAM AND 500GB HDD, am trying to install ORACLE ENTERPRISE LINUX 5.7 in this machine and then I have to install a VISION INSTANCE 12.1.1.
ISSUE
====
1. After installation it asks for an restart and it has been restarted and i can see the starting flash screen and the naming "ORACLE ENTERPRISE LINUX SERVER 5.7" is being started, but after that i couldn't see any login screen or anything else.
2. So i have given a long press of my POWER BUTTON and made a restart for 3 - 5 times but the symptoms are same and each time i get a different colored screen such as green, white, blue and pink after the boot startup screen goes.
3. I couldn't proceed further to login.
4. At the same time I could see 2 options in the GRUB MENU loader at start such as (a) ORACLE ENTERPRISE LINUX.... and (b) ORACLE ENTERPRISE LINUX BASE...
5. Memory for crash kernel(0x0) (0x0) not within permissible range -- What does it means?
6. I have tried using both of the menu options but the result it same - no login screen or cant able to proceed further
NOTE: I have installed the same OS in another P4 and CORE2DUO MACHINES it works fine.
QUESTIONS
=======
1. Whether this configuration would be supporting OEL, RHEL 5?
2. Anyother OS will be working for this configuration?
3. Any drivers to be downloaded for this? since it is a FRESH one.
Any kind of help would be appreciated greatly
Thanks a lot in advance
Regards,
Karthik Singh

Hi Dude,
Thanks a lot for your reply, I thought the OS might be the problem but i think some VIDEO DRIVER or some thing should be enable into the BIOS. So i have re-installed RHEL 5 X86_64 but it also shows the same. as a try i have done pressing 'e' and it shows 3 parameters like
root (hd0,0)
kernel /boot/vmlinuz-2.6.18-128.el5 ro root=LABEL=/1 rhgb quiet --> i have selected this one and pressed again 'e' and added "nomodeset" at the last
initrd /boot/initrd-2.6.18-128.el5.img
but i dont know what it is happening to start? because even in my P4 which has 2GB RAM it will load faster but as soon as it starts the kernel to read some 2 lines and "MY SCREEN GOES SOMEWHAT CRASH" and the same colors are appearing either blue, white, pink and violet.
I have tried CHANGING
1. DISPLAY MODE from LCD TO VGA -- VICE VERSA
2. CHANGED AHCI TO COMPATIBILITY -- VICE VERSA
IS there anything else that i have to do? am searching for a VIDEO DRIVER which will support for linux. and found a link whether i dont know it will help or not http://download.lenovo.com/ibmdl/pub/pc/pccbbs/thinkvantage_en/linux-bootable-cd-16.txt
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS025448
Please can anyone provide any solution which would fix this issue for me.
Thanks a lot

Can't connect to VPN anymore after installation of visual studio 2012

I found that a similar question was asked, albeit for the previous version of Windows and visual studio
http://social.technet.microsoft.com/Forums/en-US/w7itpronetworking/thread/335e9de5-f183-4d03-a441-95bc151dc7d0
it took me few days to resolve an issue, so decided to share here.
as a headline goes the story was: I installed Visual Studio 2012 on Windows 8 and after installation an L2TP vpn connection gave error 789
the solution I found with my internet provider was to change in registry
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Rasman\Parameters]
"ProhibitIpSec"=dword:00000001
it looks though that this issue should be fixed, while my solution works it is hardly useful hint for most
affected ( if only they find a solution by search ).

Hi,
Thanks for sharing. We really appreciate your time and efforts. Hope your experience will help other community members facing similar problems.
Regards.
Spencer
TechNet Community Support

Database home page not opening in oracle linux 4 after installation?

I have just installed oracle 10g express edition R8 (32 bit) in oracle linux 4 (oem 4) which is running on vmware. After installation on going
application(start)->oracle 10g express edition ->Go To database home page. Database home page starts on konqureor and it shows
"An error occurred while loading *http://http//127.0.0.1:%httpport%/apex*:
Unknown host http "
All the other application including plsql is working right which comes with oracle 10g xe. But without Database home page i can't start doing plsql because i can not create any database without opening database home page.
I have also posted this question in yahoo answers(_http://answers.yahoo.com/question/index;_ylt=AjLqSLCkMZzaJgBv_igbiN7ty6IX;_ylv=3?qid=20120324013912AANOlL9_) but what answers has been provided i am not able to understand.
plz help i wanted to work on oracle database. I am trying it for so long. Thanks in advance
Edited by: 921562 on Mar 24, 2012 3:35 AM
Edited by: 921562 on Mar 24, 2012 3:35 AM

921562 wrote:
I have just installed oracle 10g express edition R8 (32 bit) in oracle linux 4 (oem 4) which is running on vmware. After installation on going
application(start)->oracle 10g express edition ->Go To database home page. Database home page starts on konqureor and it shows
"An error occurred while loading *http://http//127.0.0.1:%httpport%/apex*:
Unknown host http "
All the other application including plsql is working right which comes with oracle 10g xe. But without Database home page i can't start doing plsql because i can not create any database without opening database home page.
I have also posted this question in yahoo answers(_http://answers.yahoo.com/question/index;_ylt=AjLqSLCkMZzaJgBv_igbiN7ty6IX;_ylv=3?qid=20120324013912AANOlL9_) but what answers has been provided i am not able to understand.
plz help i wanted to work on oracle database. I am trying it for so long. Thanks in advance
Edited by: 921562 on Mar 24, 2012 3:35 AM
Edited by: 921562 on Mar 24, 2012 3:35 AMThis has nothing to do with Oracle. Do you have an understanding of how URL's are constructed? The leading characters, delimited by the colon (':') specify http protocol. The string between the first colon and the next (if exists) specifies the fully qualified name of the host, or the IP addess of the host. Take a look at what you have there: //http//127.0.0.1" I really don't think your host name is "//http//127.0.0.1". More like '//127.0.0.1"

I am living in china and after installation of the new iOS the appstore and iTunes open in chinese. all language settings are in german. what can i do?

i am living in china and after installation of the new iOS the appstore and iTunes open in chinese. all language settings are in german. whar can i do?

If it still shows the icon, Settings, then General, (sixth one down), then international, (third one up from the bottom), then, at the top, has where you can select what language, I think English is at the top of the list. I hope I can help!

Cannot Access EAC/ECP on exchange server 2013 after installation

Hi,
I can not Cannot Access EAC/ECP on exchange server 2013 after installation . Error 404.4 code 0x80070002
Help!
Thanks,

Hi Florin
Did you try accessing EAC by using below link
https://<Exchange_2013_CAS_FQDN>/ecp?ExchClientVer=15
Please access EAC via Internal URL: https://<CASServerName>/ecp
Finally ensure that you have logged in as administrator as well as this might be problem as well
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com

General question after installation

Similar Messages

Maybe you are looking for