Generate multiple Shipment Output based on Ship-to

Hi,
In a shipment i have deliveries that belongs to more than one ship to.
Ex : Shipment 2345
Deliveries 80003435 - Sold To 100034, Ship To 456456
Deliveries 80003436 - Sold To 100034, Ship To 456458
We need to generate output for this shipment for both the ship to's.
Could you please advise .
Thanks,
Kumar.

Hi,
pleaseconfigure out put determination procedure in SPRO or NACE for V7 application.
maintain two condition types named as SOP1 for 1st SH and SOP2 for the second SH and one or two condition tables basing on the requriment.
create condition record giving importace to SH.
follow the standard out put determination procedure steps.
hope this willl solve your issue.
regards
balajia

Similar Messages

Using mathscript to generate multiple digital outputs for switch control

Hello
I am new to this NI LV and a have kind of a basic question. I would like to use Mathscript to generate an array of bolean numbers which will be used to control the Digital I/O lines. I am using NI 6251 USB device and the Mathscript code runs well. But I have a problem using this array to control the Digital output. So I created a simple test programme where I set the DAQ assitant to generate 4 digital outputs(P0.0 ~ P0.3) and it gives error that ".. number of channels in the data does not match the number of channels in the task..." (see attachment) . How can I solve this problem thank you.
Attachments:
K-9.jpg ‏36 KB

looks like you did not initialize all 4 of the elements in the bool array....

How to generate multiple digital outputs (square waves delayed) at 50 kHz?

I would like to generate 3 digital outputs like the picture attached at 50 kHz. Using the "digital pattern generator (marching values).vi", I can generate 3 digital square wave but without the delay time. How can I do that?
I'm using the card PCI 6034E.
Thank you
Attachments:
digital outputs delayed.png ‏8 KB

Hi,
the digital pattern generator (marching values) only shifts the binary value of the first signal and sample to the next signal/sample.
Have you tried generating your waveforms via build waveform and use t0 terminal to change the lead delay?
In general, this DAQmx example could be helpful which you can modify to your needs.
DAQmx Write Digital Channel- External Clock: https://decibel.ni.com/content/docs/DOC-11142
Regards,
Thomas

Is it possible to generate multiple reports output in single click

Hi All,
          I am using OBIP 10.1.3.4.1
          I am having 5 reports in a folder. I want to generate all the 5 reports output in a single.
          Is there any possibilities to do it.
Regards
Balaji

Hello Balaji,
You can schedule the reports at the same time and send the output on the e-mail.
You cannot use Interactive View for viewing 5 outputs on the same time.
Regards,
Liviu

How to get multiple html output file from an xml document via xslt?

Hi,
the purpose is to generate multiple html output file from one xml file
depending on special tag.
exp: i have an xml file which contains sevreral articles so how to get each article section in an independant html file
Thanks for help

Not a standard feature of XSLT. But Michael Kay's XSLT implementation, SAXON, provides that as an extension. Get it here:
http://saxon.sourceforge.net/

How to generate multiple output pdf's from one oracle reports

how to generate multiple output pdf's from one oracle reports.
I have a report where I have to generate more than one output files from the same report based on a parameter.
Each output file is for each parameter.
Is this possible in oracle reports, is so how ?

You can better post your question in the reports forum instead of this pl/sql forum.

Purchase order generating multiple outputs

Hi All,
We are facing this unusal problem where the PO is generating multiple messages .The most tricky part is its doing only in the morning at 9.30 am when the goods movement file is run.
During this time the PO close goes crazy and it generates multiple outputs per line item.
Please advice.
Regards,
Jinen

Hi,
What does the goods movement file run do ? Based on this you can do the same manually to a PO and check why the output is triggered.
Cheers !

Shipment Output determination based on shipment status.

Dear all,
In T code VT01N we are facing some issue.
The issue is like when am selecting the Shipment button and saving at that time the output type is trigging.
Actually the output type should trigger only after the shipment completion.
Could any one kindly suggest any way for Shipment Output determination based on shipment status.
<removed by moderator>
Thank you,
Niketh
Edited by: Thomas Zloch on Oct 8, 2011 8:21 PM

I think you have to write your own REQUIREMENT CODE under the outpout type .

EDI Output type generating multiple IDOCs

Hi All,
For one of the Business requirement we have created a Delivery EDI output type and output type is processed via Report RSNAST00 in a batch job.
The delivery document shows only one output type prcossed still, mutiple idocs are being sent out for this Delivery.
RSEOUT00 is being used to process outbound IDOC.
Any pointers toward this abnormal behavior shall be helpful.
BR,
Anshul
PS - We havent implemented change Pointers

Okay, so you have one output record in the delivery document generating multiple IDocs.
Compare the control records of the generated IDocs. Do they have the same Basic Type, Message Type and recipient Partner Number?
If yes,
1. Check for multiple background jobs running RSEOUT00 at the same time. Seems unlikely, but this is easy to check and eliminate as a possible cause.
2. Step through the program RSEOUT00 as it generates the output type for one delivery document. Perhaps something is happening in a user exit that inadvertently results in replication of the IDoc.
Otherwise, the process code that gets executed by the output type in the delivery document is, for some reason, generating additional output. I donu2019t know of any standard output process code that does this, but it could be deliberate (by design). If you are sure that it should NOT happen, then step through the code and look for a mis-behaving user exit.
Regards,
zKen

Generate output based on the analysis of a input array

Hello!
I would appreciate some help with this:
- I have an input array X. It is a phase array, in other words, it has values from -pi to pi.
- I want to create digital pulses that match with certain values of phases in X. Example: If a value of X, in position "5", is -3*pi/2, i would like to generate , in the output array Y, a value of 1 in its position "5".
My problem here is that i am not being able to detect the position of the array where my condition is met. I tried to use a case structure and a for to do this, without success.
I hope i was clear enough, thank you very much.

Ok, now that i Got the phases, i have to generate the output. Knowing the period of the phases wave and the timing of a certain phase, i want to generate a digital output in a future time that falls in the specified phase. It's a closed-loop of stimulation. What i'm trying to do is this:
- First of all, I get the phases like Altenbach said.
- Then, i do the time calculus to predict time intervals that i would wait to generate my pulse, and that pulse should fall in the specified phase of the input waveform, since its a closed-loop system.
I'm attaching the current vi that i designed, and I appreciate any help.
The real trouble now is generate the output pulse/ boolean in the right time, with a duration of, i dont know, 10ms, just to make it work. something like this: _______| |________
<--10ms-->
Best Regards,
Attachments:
PLOT_SIGNAL_ALTERNATIVA.vi ‏67 KB

How to generate multiple "gift certificate" pdfs with unique serial #s

I am a new Acrobat user (have Adobe Acrobat 9 Pro) and poked around a bit to see if I could find out how to do this, but found nothing.
I assume this has been done before and hope someone can point me in the right direction.
Here's what I am trying to do:
1. I currently have a pdf doc with a field for a unique serial # (let's call the doc a "Gift Certificate" for simplicity, though that's not quite what it is).
2. I want to generate multiple pdf files, say 100 of them, based on this original Gift Certificate, but with each one having a unique serial # in the appropriate field, say starting at ser # 1001, and running through to ser # 1100.
3. I want to be able to save each of these new files on a hard drive - not outputting them to a printer (though this might come in handy in the future too).
Is this something I can do in Adobe Acrobat Pro 9? I looked at the Batch Processing tool, but that didn't seem to have any ability to create new files.
Or do I need a plug-in? Or a separate software altogether?
Any help for this novice would be greatly appreciated.
Thanks
keith

Problem solved.
Forum member try67 wrote me a script, complete with simple installation instructions.
It works perfectly right out of the box. Great stuff!!!
Wish it always worked that way.
Keith

BIG Problem with generating multiple pdfs

Hi,
I have an application for which the final output is a pdf report about an applicant from a database of applicants.
If I print the form just once, all the stylesheet formatting is applied correctly.
If I try to loop through the database and generate multiple reports of multiple applicants, the styles and formatting get applied ONLY to the first report, and then the subsequent reports do not have any styles applied which of course makes them unacceptable.
I've tried loading the stylesheet before the loop and inside the loop, no difference.
The styles being lost are for divs and tables and cells. Fonts are handled separately by calling functions within the report which apply them on the fly.to text based on the section and type of output.
Is anyone familiar with this problem? Is there a workaround? I really really really need this to work.
Thanks,
RIchard

I do not know the cause, but if all else fails you could move the cfdocument code to a separate template. Then the styles seem to work as expected.
    
    <cfloop from="1" to="5" index="x">
          
          <cfinclude template="test.cfm?x=#x#">
     </cfloop>
     
    <cfdocument format="pdf" filename="testpdf-#url.x#.pdf" overwrite="true">
        <div style="background-color: #ff0000;">Test div</div>
    </cfdocument>

[CRS2008] Scheduling a report to multiple file output in single schedule

Hi,
Is there any way in CRS2008 / Infoview to scheduling one report to multiple file output in one schedule?
i thought maybe it can, but still not found the way.
Says,
I have one report say "Report by Branch.rpt", the parameter prompt is BranchCode.
I want to generate the "Report by Branch.rpt" for every BranchCode in separate output generate file. Like, "Report by Branch.rpt" for BranchCode A, or "Report by Branch.rpt" for BranchCode B.
So, if i run the schedule, it will generate several report based on the report parameter given.
Hope, would find the way.
Thanks in advance.
Regards.
Edited by: fritzwijaya on Sep 20, 2010 3:47 AM

For anyone still looking, the job can be seen under the Job History option on the home screen, but not on the Job History option under the report in the catalog - i am assuming this is becasue somehow im not referencing the report correctly in the ScheduleReport request message.
Also, the jobId returned is a parent jobId, which when used to poll the job status, always returns a 'Scheduled' status. Im now adding 1 to this ID to get the status of my job - this returns the correct status of 'Success'.
Still hoping someone has an idea on the getDocumentData question...?
Thanks.

XML Publisher Report not generating the PDF output.

Hi,
I am trying to develop a XML Publisher Report in R12 Vision Instance.
I have developed the rdf report and concurrent program with XML as output format. Ran the concurrent program and I got the XML output. Based on XML output I have created the rtf template. Using both the template and xml output I have created in Data Definition and Template in XML Publisher Administrator Responsibility. Now I am comming to the concurrent program and running the program, here instead of generating the PDF output it is generating again the XML output and concurrent program completing with warning status.
When I am trying to do the same in 11i Vision Instance, Concurrent Program completing with normal status and when trying to view the output it is saying "Unable to Publish output for the Processed Request".
Kindly please help me out in this issue.
Thanks,
Manasa.

Hi Mahesh,
Here the concurrent programs are not erroring out. It is completing with Warning status and when we click on View Output the output is coming in XML format instead of PDF, this is in R12 Vision Instance.
In 11i Vision Instance, concurrent program is completing with Normal Status but when we click on View Output it is saying "Unable to Publish output for specified request".
Thanks,
Manasa.

Not able to generate multiple lines for headers in report

Hi,
I am new to BI publisher and not able to generate multiple lines for headers. Please help me to resolve.
I am using RTF template, data source as PS Query and XML file (system generated from the data source)
When I am using system generated 'First XML' file, I am getting output in the follwoing format.
TEAM_MEMBER, PROJECT_ID, NAME, START_DT
e.g.
EMP1 , 71000, Sample, 01-Jan-2010
EMP1 , 72000, Sample, 01-Feb-2010
EMP1 , 73000, Sample, 01-March-2010
But I want the report to be generate with multiple projects for one employee like below format , for that I used 'Second XML' file but I am getting blank report.
In short if there is one to many case, how to show in reports??? Please correct if I am going wrong.
TEAM_MEMBER
PROJECT_ID, NAME, START_DT
PROJECT_ID, NAME, START_DT
PROJECT_ID, NAME, START_DT
e.g.
EMP1
71000, Sample, 01-Jan-2010
72000, Sample, 01-Feb-2010
73000, Sample, 01-March-2010
**********First XML**************System generated XML ****************************
<?xml version="1.0"?>
<query numrows="2" queryname="SY_EMP_PROJECT" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="">
<row rownumber="1">
<TEAM_MEMBER>TEAM_MEMBER </TEAM_MEMBER>
<PROJECT_ID>PROJECT_ID samp</PROJECT_ID>
<NAME>NAME sample data</NAME>
<START_DT>2010-08-25</START_DT>
</row>
<row rownumber="2">
<TEAM_MEMBER>TEAM_MEMBER</TEAM_MEMBER>
<PROJECT_ID>PROJECT_ID samp</PROJECT_ID>
<NAME>NAME sample data</NAME>
<START_DT>2010-08-25</START_DT>
</row>
</query>
**********Second XML**************Manually created XML and using to show multiple projects for one employee****************
<?xml version="1.0"?>
<TEST numrows="2" queryname="SY_EMP_PROJECT" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="">
<TEAM_MEMBER rownumber="1">
<TEAM_MEMBER>1</TEAM_MEMBER>
<EMPLOYEE_NAME>SAMPLE</EMPLOYEE_NAME>
<PROJECT>
<PROJECT_ID>1111</PROJECT_ID>
     <PROJECT_DESCR>SAMPLE</PROJECT_DESCR>
<START_DATE>01012010</START_DATE>
</PROJECT>
<PROJECT>
<PROJECT_ID>1112</PROJECT_ID>
     <PROJECT_DESCR>SAMPLE</PROJECT_DESCR>
<START_DATE>01022010</START_DATE>
</PROJECT>
</TEAM_MEMBER>
<TEAM_MEMBER rownumber="2">
<TEAM_MEMBER>2</TEAM_MEMBER>
<EMPLOYEE_NAME>SAMPLEC</EMPLOYEE_NAME>
<PROJECT>
<PROJECT_ID>1111</PROJECT_ID>
     <PROJECT_DESCR>SAMPLE</PROJECT_DESCR>
<START_DATE>01012010</START_DATE>
</PROJECT>
<PROJECT>
<PROJECT_ID>1112</PROJECT_ID>
     <PROJECT_DESCR>SAMPLE</PROJECT_DESCR>
<START_DATE>01022010</START_DATE>
</PROJECT>
</TEAM_MEMBER>
</TEST>
Edited by: ganeshtw on Aug 25, 2010 12:14 AM

Hi,
With your first xml you can print like
EMP1
71000, Sample, 01-Jan-2010
72000, Sample, 01-Feb-2010
73000, Sample, 01-March-2010While creating the RTF template you can use the Group by option.
<?for-each-group:ROW;./columnname> then print the column name
<?columnname?>
--Then your table format
71000, Sample, 01-Jan-2010
72000, Sample, 01-Feb-2010
73000, Sample, 01-March-2010
<?end for-each-group?>
Thanks.

Generate multiple Shipment Output based on Ship-to

Similar Messages

Maybe you are looking for