Generate report to the screen and file (pdf) at the same time

Hello guys,
I am trying to distribute a report at the same time to the screen and the file. I cannot get it to work. In the help file it says that I could specify destinations in the 'Distribution Dialog'. When I enter there two destinations the report does not run even to one of them. If I enter one destination it would run perfectly. The other option is to create .dst file. I created it. Where should I specify the file location? Is it a desname?
Any help would be appreciated,
Thanks,
Sonya

Distribution is a batch process. You can't combine distributing a report to file/printer/email/etc. and running to screen.
Each entry in the distribution dialog will be executed the same as the entry in the .dst file.
If you want to run with a .dst file then you'll need a command line argument like:
rwrun60 <normal command line args> distribute=yes destination=<filename.dst>

Similar Messages

More than one reports at the same time?

Hello
Is there any way that i can call more than one reports at the same time through the .FMX file. At the moment i can call only one report, if i need to call another report then i have to close the 1st report, then it will show me the 2nd report. Report Background Engine can run more than one reports at the same time?
Nametullah kalair

Yes i know, we can submit multiple - asynchronous- jobs, but the problem is, is not possible to open more than one previewer to see multiple reports at the same time for analysis.
Regards,
Nametullah kalair

How to display multiple reports at the same time

Hi,
I'm trying to display multiple reports at the same time, each one in separates tabs or windows using Forms 11g 11.1.1.6
I have a button which has a call to a procedure which makes use of rp2rro library to show the specific reports, for example:
call_report('report1');
call_report('report2');
call_report('report3');
call_report('report4');
The main problem is that, just the last report is been displayed.
Is there some way to display report1, report2 etc in separate tabs or windows ??
Regards
Carlos

You shouldn't have a problem calling different reports at once. As long as you're using Forms 11g they show up in different windows.
The question is how you are calling the report.
Here is how I manipulate it.
After I pass parameters with the ADD_PARAMETER built-in I set some key values (destype, desformat, desname) with the RP2RRO's procedures.
Finally calling RP2RRO.RP2RRO_RUN_PRODUCT and then WEB.SHOW_DOCUMENT passing the correct procedure parameters the report comes up in a window. If you repeat the above changing the appropriate variables (the report_name in the RP2RRO_RUN_PRODUCT and so on) you can get multiple reports in different windows.

How to change drill filter values of all reports at the same time

Hi,
The Webintelligence users in our environment usuallly use drill filters in their document's reports. We'd like to find a way to change the drill filters' values of all reports when one value is selected. I mean, we need a work around to change the drill filters of all reports at the same time.
We are using Business Objects XI 3.1 (a lot of webintelligence documents available, over than 2500).
Does someone know a way to do that? I've already looked for that a lot, but I couldn't find anything.
Thanks in advance,
Gustavo Borges

Hello Gustavo,
as you refer to a Webi problem I recommend to post this query to the [BusinessObjects Web Intelligence|SAP BusinessObjects Web Intelligence; forum.
This forum is dedicated to topics related to the creation and design of Web Intelligence documents using the Web Intelligence Report Panels. This includes areas such as universe connectivity, prompts, charting, formatting, filters, and formulas.
It is monitored by qualified technicians and you will get a faster response there.
Also, all Webi queries remain in one place and thus can be easily searched in one place.
Best regards,
Falk

Open document syntax for opening of two detail reports at the same time

Hi All,
I have one summary report   and two detail reports (sales detail Report and Activation Detail Report) In summary report I have serial number when I click the particular serial number in summary report I need to display two detail reports at the same time is it possible to do In Business objects webintelligence 3.1
I am using webi 3.1 , please suggest me any one how it do u2026u2026?
Thanks in Advance!!!
Regard,
Sreekanth.

while forming the link, try using java script.
the html can be like:
<html>
     <A href=" j avascript:window.open('http://www.google.com','','');j avascript:window.open('http://www.yahoo.com','','');">
          Click Here
     </A>
</html>
In place of # write (as I am not able to paste the code):
javascript:window.open('http://www.google.com','','');javascript:window.open('http://www.yahoo.com','','');

If Two Users try to schedule a report at the same time does that lead to a Deadlock?

When Two users trying to access the same server and need to access the report for scheduling at the same time, does that lead to Deadlock Situation?
What are the Odd's in such scenarios?
Please help me understanding.
Regards,
Shiva

When two users are say trying to schedule the same report at the same time - the relevant Job server has default capacity of running 5 concurrent jobs at a time (this value can be increased) - that means, it can run 5 schedules at the same time.
Let's say now two users have scheduled 6 reports - now the 5 reports that were scheduled will be in the "running" state but the server has only 5 concurrent job capacity so the 6th report schedule will stay "pending" until any one of the existing jobs are completed, and then the 6th report will start "running".
There is nothing called deadlock while scheduling. While viewing the reports, there are enough resources available in the BO system to make the report available for various users at the same time.
Thank you, Rahul

How many users can view the same report at the same time in obiee answers

Hi All,
How many users can view the same report at the same time in obiee answers..?
What is max and minimum number of users.
Do we need to increase any system configuration.
Thanks,
Jagadees.

Hi,
Many users can view report at same time.It depends on the server if it can accept those many users at same time.If number of users increases OC4J may not work properly.
Refer : http://www.artofbi.com/index.php/2009/10/what-is-oc4j-an-oracle-application-server-distribution-really/
Regards,
Srikanth

CRVS2010 - open multiple rpts at the same time, like sheets in a xls file ?

Hi all,
is that possible to open multiple reports at the same time, like sheets in a excell file ?
Is that possible create tabs beside the MainReport tab ? or include reports in the Group Tree ? how can I do it ?
The application is in asp.net with VS2010 and CR2010.
The reports used to be in excell with three sheets and now we are migrating them to crystal reports, how can I create the report with those three sheets ?
thanks !
Subject modified as per the sticky post at the top of this forum; [Crystal Reports for Visual Studio 2010 Beta - read before posting|Crystal Reports for Visual Studio 2010 Beta - read before posting;
Edited by: Ludek Uher on Aug 31, 2010 7:33 AM

I'll make the suggestion to the Program Management group.
You may want to do a post to the [Crystal Reports Design|SAP Crystal Reports; forum and ask them how they's fake that sort of a requirement. E.g.; there may be some way to make this report look the way you want, but it will be best to ask the experts. Don't mention CRVS2010 as they don't support it and most likely you will not get an answer.
Ludek

How can I run the report for different input values at the same time?

Reports version: Report Builder 6.0.8.13.1
Oracle version: Oracle8i Enterprise Edition Release 8.1.7.0.0
I want to run the same report for different input parameter values and spool each o/p to different file and ftp to a server. For this, as a first step, I am spooling different input values in to a file, reading those values through a loop and calling the report for that input values. Each report run/execution is taking 15 minutes. Total report execution is taking approximately 4 hours (assuming 16 different input values) to complete. So I have to wait 4 hours to see ALL outputs.
I would like to run the report parallel for ALL the input values and I should be able to see the ALL outputs with in 15 or 16 minutes.
In my shell script, I added & symbol at the end of the report call to start/run the job in the background. Due to this the control passed to the next step after the report call. At this place I have an ftp command to send the output file to a different server and it is giving error some thing like o/p file is not available/created yet". This is due to the fact that report writer is NOT yet completely started/initiated or it is NOT completed the spooling.
How can I run the report at the same time for all the input values and save the time?
Thanks in advance.
Kishore.

Increase the number of server engines running right now it seems there is only one engine running ,increase it to 4 or 6
and then atleast 4 or 6 reports will run simultaneously.
For FTPing the output add to your sript to check whether it is locked and if not then only try to ftp .
Also for more better functionality read the document (chapter 15 ) for 10g reports for its new fuinctionality.
http://download.oracle.com/docs/cd/B14099_17/bi.1012/b14048/toc.htm
Thanks
Subodh

How to limit the max dialog no that one user can use at the same time?

Hi,
I meet one performance problem that one user can open 6 sessions in the GUI and he/she can run 6 reports at the same time witch could occupy 6 dialogs in the sap R/3 instance. It makes poor performance for other users.
Would you pls tell me how to limit the no. of sessions one user can create at the same time or how to limit the no. of dialogs one user can occupy at the same time?
Thanks a lot!
I used this parameters in the default profile as blew:
rdisp/rfc_check 1
rdisp/rfc_use_quotas 1
rdisp/rfc_max_own_used_wp 20 (means: 20%)
It still didn't work.
Sean

Hello,
We can reserve DIA W.P by giving value to the parameter :- rdisp/rfc_min_wait_dia_wp=1(default)
that have to necessarily remain free for other users.
This parameter is used to reserve a number of dialog work processes for Dailog mode.
For eg. If 10 dialog w.p. are configured for the instance(rdsip/wp_no_dia=10) and the parameter rdisp/rfc_min_wait_dia_wp=3 is set,parallel RFC's can occupy a maximum of 7 DIA W.P.3 DAI W.P. always remain free for dialog mode.
But now the question is how we assign/restrict this free dialog w.p. to the specific user.
Reply...
Regards,
JUNAID

Fill setup tables appl 11, 12 & 13 in the same time ?

Hi
Whether there are some contraindications against simultaneous generating setuptables for application 11, 12 and 13?
I must fill at first one setup table
next second and next third
or may I generate all in the same time?
Regards
Adam

Hi,
I dont think it will be an issue. We have done a couple of times without much issue (not exactly for the same applns ).
Thanks,
JituK

While generating reports in Oracle BI Publisher in pdf format, the generated pdf reports have hindi इ matra displaced by one character. For example, रिपोर्ट is printed as रपेिोरट. Word file generated of the same report have correct hindi इ matra positi

While generating reports in Oracle BI Publisher in pdf format, the generated pdf reports have hindi इ matra displaced by one character. For example, रिपोर्ट is printed as रपेिोरट. Word file generated of the same report have correct hindi इ matra position and also pdf generated from this word file also contains the same.

Generating 2 test reports for the same test - XML and HTML

Hi All,
I have a special test requirement.
Need to generate 2 test reports for the same test. One in HTML and the other in XML format.
Is there any direct method for that?
How it can be implemented?
Thanks in advance.
SajK

Hi SajK,
To accomplish this task, you will need to modify the process model. For example, if you are using the sequential process model, you can concentrate on the TestReport sequence call and the various report related steps in the Single Pass and Test UUTs sequences.
The TestReport sequence (also a callback) relies on Parameters.ReportOptions.Format to decide which of the following sequences to use when generating the report:
<TestStand>\Components\NI\Models\TestStandModels\reportgen_txt.seq
<TestStand>\Components\NI\Models\TestStandModels\reportgen_html.seq
<TestStand>\Components\NI\Models\TestStandModels\reportgen_xml.seq
In your case, instead of choosing one of the sequences, you could hard code it to use both the html and xml sequences. Be aware that for this to work, you must also modify and/or duplicate most of the report related steps in the Single Pass and Test UUTs sequences. For instance, the Set Report Format step becomes unnecessary since you are hard-coding the report format. On the other hand, the Write UUT Report step needs to be duplicated, one step to write to an html file location, and another to write to the xml file location.
Please note that modifying the process mode in this way will deprecate some of the settings in the report options dialog box (such as the report format). For more information on TestStand report generation, please refer to the following DevZone article:
Report Generation Explained
Regards,
Message Edited by James M on 05-29-2007 03:08 PM

How to?? show smartform and generate pdf at the same time

hi experts,
how can i show the smartform and generate a pdf at the same time?? i have a control parameter gtotf in X and i generate the pdf but i want to show the smartform at the same time??
thx in advance

Hi...
call fm <sf function name>
exporting...
importing..
tables..
now in the outputparam set the getotf as 'X'.
call the same FM again and get the otf data.
call fm <sf fm name>

How do i drag media to the menu screens in premiere elements 13? I can't see my audio files and the menu screens at the same time. In prior versions it was easy

How do i drag media to the menu screens in premiere elements 13? I can't see my audio files and the menu screens at the same time. In prior versions it was easy?
It is very cumbersome to "re browse" for audio files/pics/movie clips to add to menu screens. Certainly there is a way to view the media and menu screen at the same time so I can drag and drop?

Jayhawk
I think I know exactly what you are seeking and believe it cannot be done in Premiere Elements 11, 12, and 13 as it can be done in versions earlier than 11 where the Disc Layout and Project Media are viewed side by side.
Premiere Elements 13 uses a Movie Menu customization workspace which is not allowing viewing of Project Assets in the Expert workspace at the same time.
ATR

Generate report to the screen and file (pdf) at the same time

Similar Messages

Maybe you are looking for