Generating a SBO standard report

Dear Experts/Gurus,
I have a problem to add new fields in a selection criteria form before generating report. It is an inventory status report selection criteria form (form no. 689). There are only item code, vendor code, properties, item groups and a tick box available to be used as filter the report, after I check from debug information, it  uses OFLT table. I have checked it that there are many fields that could be added to the selection criteria form to generate a specific report. How to add new fields that available in the OFLT table into the selection criteria form? I have explored training materials (ppt) but still not succeed. I Really appreciate your answer. TIA
Rgds,

Helo Krish,
Tks for your cnfrm.I also have searched but nil. This is really confusing. Anyway, I have tried to modify the report using print layout designer, add 2 fields posting from and to using posting period (OFPR) but the report can't limit the date, it is still until current date but in the report we could see the posting date/posting period of a certain item. The other way, just creating the view in the SQL 2005 using OITM, OFLT and OWHS. The weakness is the available quantity can't be created. I think it should be a store procedure to do that. If it is so, it will require an effort develop it. I don't think all SBO end users expect it. I still hope that there will be a way or codes to add a certain field from OFLT into form 689.
Rgds,
Message was edited by:
        steve andre

Similar Messages

  • Standard Report layouts in Crystal 2008 for SBO 2007A

    It has been 2 years since SBO adopted Crystal Reports to become part of the standard product, I refer back to the initial links which promised links to Standard Reports, however 2 years later these links appear to be exactly the same, no updates.
    http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/807d22cb-cb1d-2b10-8794-fb76d7feca88#section12 [original link is broken]
    For SBO 8.8 there appears to be a pack of Reports available for Sales Orders, Purchase Orders etc
    I would like to know if there a pack of standard Crystal reports for SBO 2007A and if so where would we be able to find them?
    Many thanks
    Kevin West

    I found the following link
    https://websmp101.sap-ag.de/~sapidb/011000358700001094082009
    It has the following - Crystal Reports Layout - IT Invoice Layout for Release 2007 A
    An invoice layout for Italy...well done 2 years and we now have an Italian invoice

  • Difference in the appearance of HTML vs. Standard reports generated with the Report Generation VIs?

    When I generate a "Standard Report" (to a printer or PDF) with the attached code, the output looks like this:
    If I instead use the same code to generate an HTML report, the output looks like this:
    Can anyone explain why the HTML output has had the extra spaces stripped out of it?
    Is there anything I can do to prevent it from happening?
    VI is attached (LV v11.0.1f2) but this is what it looks like...
    Attachments:
    Print Test.vi ‏47 KB

    SteveBale wrote:
    If you look at your html source the spaces are there. The problem is the way html is rendered it removes the spaces. You will either need to add in <pre> </pre> tags to tell the browser to include those spaces, or insert the string &nbsp; which the browser interprets as a single space.
    Regards,
    Steve
    OK, thanks. I guess I'll end up living with it the way that it is because
    using either method seems to also have the side effect of causing the output to become double-spaced and
    the only reasonable place to implement the change (so that it did not also impact the "standard report" output) would be within the report generation VIs and I'd rather not be modifying them.

  • Possible standard reports that can be generated with respect to lead...

    hii friends,
    i am new to CRM.
    can any on please give me some idea about what kind of standard report can be generated in crm with respect to leads and opportunity.
    thanks,
    regards,
    akshay ruia

    Hi Akshay
    Lead management
    1. Won / Lost Leads Lead Origin - Lead Management
    2. Channel Analysis - Lead Management
    3. Efficiency Reporting - Lead Management
    4. History Reporting - Lead Management
    5. Lost Leads - Lead Management
    6. Qualification Level - Channel Mgmt.
    7. Lead History - Channel Mgmt.
    8. Top n Lost Leads (Current Year) - Channel Mgmt.
    9. Won Leads (Current Year)
    Opportunity Management
    Competitors in Current Opportunities
    1. Completed Opportunities According to Status
    2. Completed Opportunities Acc. to Status (Sales Manager Portal)
    3. Expected Product Value
    4.. Expected Sales Volume per Product
    5. My Strongest Competitors Opportunity Item Details
    6. Opportunity Monitor
    7. Opportunity Monitor Timeline Analysis
    8. Opportunity Pipeline
    9. Pipeline Analysis per Phase
    10. Pipeline Analysis per Phase (Sales Manager Portal)
    11. Pipeline Analysis per Region
    12. Sales Volume Forecast
    13. Sales Volume Forecast (Sales Manager Portal)
    14. Targeting Based on Competitors
    15. Targeting Based on Lost Opportunities
    16. Top Five Opportunities
    17. Top Five Opportunities (Business Transaction Number)
    Hope this will be helpful.
    Regards

  • Line Item Not dispaying in Payment Advice standard report

    Hi Experts,
    I have cleared line items of a vendor by making payment through F-53 and subsequently generated the Print Form spoon request through FBZ5. But in the print, line items (cleared Items) doesn't display in Payment advice report. But for the Fiscal Year 2009 line items (Cleared item) was displaying in the Payment Advice report which is now not displaying.Since it is a standard report no changes made. So please suggest how to achieve it.
    Thanks in Advance,
    Arabinda

    Hello,
    In tr. F-53 you post a payment document,
    but to print a check you need to use some check printing program.
    SAP-delivered program is RFFOUS_C and it processes only
    one bank line per payment document.
    Please check the following general information:
    The standard form (of the print program RFFOUS_C) prints the invoice
    items followed by the check.  If the item details overflow to the next
    page, then the first check (eg cheque no. 1) will be voided and you'll
    get the valid cheque on second page (eg cheque no. 2). This is standard
    functionality.
    Also I would request you to recheck your customising in FBZP i.e.
        -> Click on the 'Payment methods in company code' button
        -> Double click on the appropriate 'Pymt meth.'
           -> Click on the 'Pyt adv. ctrl' button
              ¦ Note to payee lines on the form  /               ¦
              ¦                                                  ¦
              ¦ O  restricted to                       98 Rows   ¦
              ¦ O  None                                          ¦
              ¦ O  as many as req                                ¦
              ¦__________________________________________________¦
    - The first option will restrict the number of lines on the form to a
    value from 1 to a maximum of 98.
    - The second option will restrict the number of lines on the form to
    zero.
    - The third option option will not restrict the number of lines on the
    form.
    You may test in the system which among the three options will suit your
    needs. There is a documentation available at the side of each button.
    Also please check whether the problem happens with the standard SAP
    program. You may wish to review the documentation for RFFOUS_C via
    transaction SE38 -> Enter program name -> Select 'Documentation' radio
    button -> Display -> scroll to 'Setting up and changing the SAPscript
    forms (layout sets)'.
    Also you can refer to the parameter `No form summary section' in the
    variant of RFFOUS_C. By setting this indicator, you can prevent the form
    summary section from being printed hence the overflow is avoided and
    thus eliminates the voided check issue. Please refer to F1 Help of this
    field for further information.
    Also please refer to the F1 help on the indicator "Indicator: Do not
    Void any Checks" in the selection screen of payment program RFFOUS_C.
    I hope this helps.
    BR,
    Raquel

  • Open PO Standard Report

    Hi Experts
    Need help, I actually need a standard report if available in SAP to generate all Open POs list for all vendors.  Help me with T.code.
    Regards
    Younus

    Hi dear,
    Use T.code ME2L - Selection parameter WE101.
    You can also make use of ME2M,ME2N,(Selection parameter as WE101 again) ME2J etc here you can make use of Still to be delivered (Quantity and Value) fields in the report also you can make use of Purchase Order History column in the report.
    Edited by: Deepak Kulkarni on Feb 6, 2011 9:10 AM

  • Standard Report -  ATP Failed Sales Orders

    Please let me know if there is a standard report to get the list of ATP failed sales orders.
    In a case where customer requested delivery date has not confirmed and a new delivery date confirmed which leads another schedule line of the material.
    My requirement is to get the list of all the ATP failed sales orders, where we have two different schedule lines for a material under Item level u2013 u2018schedule linesu2019 tab view.
    Your time highly appreciated.
    Thanks & Regards,
    Victor.

    Hi,
    Proceed as below:
    - Go to SE16
    - Input VBEP
    - Input ' 01 to 02' in Schedule Line Number field
    - Input other data as per your requirement or you can add more fields in selection from settings
    - Then execute
    From above you can get all the documents for which there were two schedule lines generated.
    Hrishi

  • Required Standard report for Deliveries Made vs Stock Transfer POu2019s

    Hi,
    Is there any standard report for Generate Daily Report detailing Deliveries Made vs Stock Transfer POu2019s...
    Plz help.

    Hi,
    Using MKPF table take all material document, then usign the doc no (mblnr) take data from MSEG table
    with movement type 641 and 642 in case of reversal (STO). 101 and 102 for (Delviery) .
    take STO po of above movement type from table EKPO with PSTYP (item cat, field ) = 7. Comparing sto and delivery details and you will get the output.

  • Excel Output For Standard Report In R12

    Hi Experts,
    My Client wants Excel Output for Standard Reports ( ex:-Open Purchase Order Report (by cost center)_xml)
    I changed the default output to Excel in Template of xml publisher administrator Responsibility.
    Now it is showing the Excel output, but The layout of report is not same as layout which in text output of standard report.
    Please guide me is there any solution to develop the reports layout in ms-excel using xml file rather than rtf template.
    Thanks
    Durga.

    Hi Alex,
    Thanks for your replay.
    Generating the new rtf template which is same as standard layout is difficult task for us. Actually we have 120 reports which have same requirement.
    Is there any other solution for this . please guide me
    Thanks
    Durga
    Edited by: 805567 on Jan 23, 2012 12:33 PM

  • Standard Report with IDOC Number and PR number

    Hi
    My client need the Standard report with the combination fields of "  Purchasing Number , Requirements tracking number in PR,
    IDOC number , IDOC Processing status. "
    (Our PR will generates through IDOC from other system via XI interface)

    Hi Nagendra,
    for   Purchasing Number , Requirements tracking number in PR you can use -ME5A
    Purchasing Number-EBAN-BANFN
    Tracking number goto- MELB.
    table name-EKPO
    for  IDOC number , IDOC Processing status -we09
    For IDOC number -EDID4-DOCNUM
    IDOC Processing status-EDIDC-STATUS
    Regards,
    Krishna.
    Edited by: kris_hna on Sep 8, 2011 1:14 PM
    Edited by: kris_hna on Sep 8, 2011 1:19 PM

  • Issue in the standard report - S_ALR_87012357 outcome result

    Dear Friends,
    I am facing issues in the standard report S_ALR_87012357 "Advance Return on tax Sales/Purchases" where I am trying to pull the tax posting report for the current period.Here I would like to see the tax postings which are done with the custom t code ZFB01L (mass upload of data) which is the replica of FB01L. The issue here I see is, any postings done via custom t code with tax code does not appear in the standard report t code S_ALR_87012357. Please advice whether is there any alternative transaction code or program where in I can get all tax postings similar to this standard report or do we have to create a custom t code to get such report with the help of ABAPer.
    Kindly advice.
    Regards,
    Siri

    Dear expert
    Example :
    In Italy, you are required to register all you customer and vendor invoices about your company's sales and purchase activities within the country, in the European Union, or outside the European Union. According to the legal requirements, you need to create value-added tax (VAT) reports based on your customer and vendor invoices on a monthly basis. Depending on the size of your company, you can create the tax reports on a quarterly basis as well.
    You can use the Advance Return for Tax on Sales/Purchases (RFUMSV00) program to create tax reports (tax books) according to VAT types. It enables you to maintain your VAT registers per VAT types. You can create separate input and output tax reports about your sales/purchases activities in the country, in the European Union, or outside the European Union according to VAT types. The program enables you to save your reports with a report number (for example: 1/2008, 2/2008), and it generates a summary per VAT code at the end of the report. The program ensures the correct progressive page numbering of tax reports and calculates the debit and credit balance for the given VAT type. You can carry forward the credit balance to the following month.
    SE38 :RFUMSV00 =S_ALR_87012357
    PATH
    Accounting ® Financial Accounting ® General Ledger ® Reporting ® Tax Reports ® General ® Advance Return for Tax on Sales/Purchases ® Advance Return for Tax on Sales/Purchases.
    Under
    Set the following indicator(s)
    Output control :Read address data
    Output lists
    Output tax: Line items
    Input tax: Line items
    Regards
       Ajeesh.s

  • How to create a standard report that allows filtering?

    Hi Guys and Gals,
    Sometimes, the standard report is great because it gives the user the feeling of a grid. i.e. All of the values are editable on one page, kind of like a spreadsheet. That is sometimes very useful. But if there is a lot of data, a filtering mechanism is necessary.
    So will one of you Apex gurus please tell me how to create a standard report that also allows data filtering?
    Allowing the user to specify the number of rows displayed would be peachy-keen too.
    Thanks,
    Kim
    P.S. I'm running Apex 4.1 with Oracle 11g.

    Kim2012 wrote:
    Your idea sounds very promising, but I apparently need a nudge in the right direction. From "Create Page", I clicked on "Form" and then "Tabular Form". Why would you do this? The advice given was
    create a standard report page using the Create New Page wizardi.e. go to Home > Application Builder > Application > Create Page and click Classic Report, this was suggested because the original post said:
    >
    So will one of you Apex gurus please tell me how to create a standard report that also allows data filtering?
    >
    Nothing about forms. Tabular Forms, Tabular Forms. Despite many enhancements over the last few versions, tabular forms still cause problems, especially for novices trying to go beyond their own competence and the built-in capabilities of wizard-generated tabular forms.
    More good advice: Re: Newbie question-how does the tabular form work?  How to populate prim key? and&mdash;if based on decent database design&mdash;out of the box you have a usable and robust application. Use an Interactive Report or a custom report template and add some CSS and you can get something a lot more powerful, flexible and better looking than any tabular form. Spend the time you haven't wasted on frustrated hacking of tabular forms adding more features and enhancements to your app.

  • JNDI error while generating pdf from crystal reports in java

    Hi, i want to generate PDF from crystal reports in java. I have the .PDF file with database configured into the report. Following details are available in report.
    1. Server Name      = testdb
    2. Database Name  = testdb
    3. User
    4. Password
    I am using CR XI.
    In CRConfig.xml i had given following details.
    <JDBC>
         <CacheRowSetSize>100</CacheRowSetSize>
         <JDBCURL>jdbc:oracle:thin:@192.218.216.102:1521://TESTDB</JDBCURL>
         <JDBCClassName>oracle.jdbc.driver.OracleDriver</JDBCClassName>
         <JDBCUserName>user</JDBCUserName>
         <JNDIURL>password</JNDIURL>
         <JNDIConnectionFactory></JNDIConnectionFactory>
         <JNDIInitContext>/</JNDIInitContext>
         <JNDIUserName>testdb</JNDIUserName>
         <GenericJDBCDriver>
              <Default>
                   <ServerType>UNKNOWN</ServerType>
                   <QuoteIdentifierOnOff>ON</QuoteIdentifierOnOff>
                   <StoredProcType>Standard</StoredProcType>
                   <LogonStyle>Standard</LogonStyle>
              </Default>
         </GenericJDBCDriver>
    </JDBC>
    When i am calling from java as standalone, i am getting following error.
    JRCAgent1 detected an exception: Error finding JNDI name (testdb)
    at com.crystaldecisions.sdk.occa.report.lib.ReportSDKException.throwReportSDKException(Unknown Source)      at com.businessobjects.reports.sdk.b.i.if(Unknown Source)
    Can anyone let me know where is the problem?

    Actually, the question boils down to; does the framework support the fonts?
    I believe that my question re. this working in the designer was valid. The designer does not use the framework, so if it works there, it is either a framework issue or a runtime print engine issue.
    I believe if you use the code below, it will list fonts available to the framework:
    foreach(FontFamily ff in FontFamily.Families)
    System.Diagnostics.Debug.WriteLine(ff.Name);
    For more information see kbase [1198306 - Crystal Report displaying incorrect font in Microsoft Visual Studio .NET|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_dev/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333133393338333333303336%7D.do]
    Ludek

  • Error in the Report Painter standard reports delivered by SAP library 1VK

    Hi,
    The Report Painter standard reports delivered by SAP contain the following errors, after the upgrade from 4.6C to ECC 6.0,in the report 1LMA-001 (library 1VK, report group 1LMA), actual for activity types
    are missing.
    I already copy from client 000 and generated, but still missing the actual for the activity types.
    Thanks in advanced for you support,
    Susana

    Hi,
    Firts of all thanks for you answer.
    Process flow:
    1. production order confirmation CO11N
    2. after production confirmation if we check the in order CO03 cost/analysis, the actual for the activity is there.
    3. afterwards with we execute report S_ALR_87013646, the actual for the activity type is missing.
    Report group 1LMA-001 library 1VK. 
    I already did:
    1. GR59
    2. Report RGRJBG00
    3. OKB6
    Regards,
    Susana

  • Need help with Javascript to get value of standard report column

    Hello All,
    Apex version 3.1
    I have a SQL Query (Updateable report) region where I need to do some validations using an OnDemand Applicaiton Process and javascript. For this validation I need to use the serial number and the item id from the same report row. The function is called when the serial number is changed. I can get the serial number easily because it is a Text field, however the item id is a standard report column (making it a text field or hidden gives me a checksum error, long story). How do I get the value for the standard report column in order to set the value for an Application item to be used in my Application Process along with the serial number? Here is my code below.
    <script>
    function f_ValidateSerial(pThis)
      // The row in the table
      var vRow = pThis.id.substr(pThis.id.indexOf('_')+1);
        //alert('Row is '+vRow);
      // Display the serial number
        //alert('The Serial Number is '+html_GetElement('f21_'+vRow).value);
    var get = new htmldb_Get(null,&APP_ID.,'APPLICATION_PROCESS=ValidateSerial',0);
    get.add('F101_SERIAL_NUMBER',html_GetElement('f21_'+vRow).value);
    get.add('F101_INVENTORY_ITEM_ID',+html_GetElement(?????+vRow).value);   // Here's where I need to get the item id to set application item!!
    gReturn = get.get();
    if (gReturn)
          alert(gReturn);
      if(gReturn)
          html_GetElement('f21_'+vRow).value = '';
    </script>

    jarola wrote:
    Hi,
    Ok, No standard report column do not have name attribute-
    You can add one extra column to report that is your Item Id with different alias.
    Then change that column Display as to "Hidden".
    Now you have hidden input where is your Item Id. Than input have name and id.
    Regards,
    JariBut this puts me back to my initial problem. When making the column hidden I get the checksum error...
    Error in mru internal routine: ORA-20001: Error in MRU: row= 0, ORA-20001: ORA-20001: Current version of data in database has changed since user initiated update process...
    The item id is NOT in the table which I am updating (I use a subquery to get the data) so I think it has to be a standard report column. Hidden and Text Item (which have an item id) all generate the checksum error.
    So I think I'm back to my original question. Given a standard report column on a row in a sql query (updateable report) region how do I get the value using Javascript?
    Edited by: blue72TA on Aug 2, 2011 12:07 PM

Maybe you are looking for

  • How can I transfer all my files from my i-phone 4 to my mac computer?

    I have alot of files on my old I phone 4. I would like to back them all up on my mac so I'll have them when I buy a new phone when they come out. Loke notes contacks    etc. can it be done? thanks for the help. It seems all the phone wants to do is c

  • IDoc with incorrect data is expected to fail but does not

    Hi All, The Job CQM_CR_O_IF103_IN_INOVIS_ORDER3 got cancelled as result of a short dump. In the initial investigation we found that the IDoc 0000000012089824 had an incorrect information i.e. it had a material which did not exist. The IDoc is expecte

  • How to synchronize more than 5 apple devices on a macbook?

    we have 8 apple devices (2 iPhone, 2 iPad, 2 iPodtouch, 2 iPod) and can't synchronise them all on a single apple account. how to install a second apple account? thanks for you help

  • Same variable "used in more then one InfoObject"

    I want to use the same user entered value as part of the definition of two different restricted key figures, restricting on two different characteristics.  Basically the user will enter a date, and one key figure includes only those with a "Calendar

  • Oracle iAS  10.1.3.5.0 Release 3 XALAN XSLT BSF Manager not found

    Hello to all, I have a strange problem. I have a very well running app under the iAS release 2. Now I have to go at release 3. The main problem that I face has to do with the XALAN libraries. I used to load some templates (XSL) in memory like this: S