Get SERVER info using ud32

Hallo,
is it possible to get information for a single Tuxedo server, using ud32, instead of having the whole listing?
I mean, specifying some other parameters
Thank you

you cann try--
SRVCNM <TAB> .TMIB
TA_LMID <TAB> <LMID>
TA_SERVERNAME <TAB> <server name>
TA_SRVGRP <TAB> <server group>
TA_SRVID <TAB> <server id>

Similar Messages

How can I get license info using SBO 2004

Hi, everyone
I know there is a License API available in SBO 2005, but I'd like to detect the user license number etc. in SBO 2004, who has experience about get license info in SBO 2004, please share your method.
Thanks in advance!

Hi Alexey,
Thanks for your reply; actually I want to get the user buy SAP License Number, in other word I want to get the maximum count of user using SAP in the same time.
I can see the license directory, do you know which file and entry point that I can get the license number.
and also if my add-on does not run in the machine that license server running, I think may be there is none license directory in the machine which does not install server tools, if this is true, do I need use other way to get the SAP license info?
Thanks again Alexey!

Java code to get server info

Hi,
How do I get the server info i.e server IP address etc using Java code. Pl. note that this is from the business layer and not from Front end.
thanks

hello Pfister,
I'll send you one article link , just go thru it ,
you can many examples from basics. if you get any errors just take that error no. which displayed , you can find the solution for that error in the link.
This link you can see one good example:
http://www.onjava.com/pub/a/onjava/excerpt/java_cookbook_ch18/index.html?page=5
Regards,
Varun

Get server ID using TM_MIB

Hi all,
In a tuxedo service (coded in C) I'd like to get the server id of the process
that is running. (the number in the ID field when you type 'psr' in tmadmin).
I found some documentation about MIB and administrative requests but I'm a bit
confused with it...
Can someone give me the source code I need please ?
Thank you very much.
Sébastien

Hi Sebastien,
Send an FML32 buffer to the .TMIB service with the field TA_OPERATION having the
value "GET" and the field TA_CLASS having the value "T_SERVER" and examine the
return buffer. If you are interested in a specific server, place it's name in
the TA_SERVERNAME field. Here is a simple ud32 input file that will dump the
MIB information on the WSL in an application:
SRVCNM     .TMIB
TA_OPERATION     GET
TA_SERVERNAME     WSL
TA_CLASS     T_SERVER
The return buffer (if the request succeeds) will have a field TA_SRVID that contains
the information you want. Please note you may get back many occurences in the
FML32 buffer returned that you'll have to match up. Hope that helps.
Regards,
Todd
"Sebastien" <[email protected]> wrote:
>
Hi all,
In a tuxedo service (coded in C) I'd like to get the server id of the
process
that is running. (the number in the ID field when you type 'psr' in tmadmin).
I found some documentation about MIB and administrative requests but
I'm a bit
confused with it...
Can someone give me the source code I need please ?
Thank you very much.
Sébastien

Get GPS info using Autonomous and CellSite Mode parallelly using MultiThreading

I tried to get the GPS latitude and longitude values using Autonomous and CellSite Mode parallelly using two threads, but while execution only one thread is being active and I get values from only that, the other thread doesn't return any values at all.
Is it possible to retrieve the GPS information using multiple threads running parallelly and also can I display the latitude and longitude values from the threads on the screen with less accuracy rate among the values.
Thanks in advance...

Your thread may not get noticed as it is in General Support threads. You may post your thread in Java Development to get faster response.
Ron
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up Blackberry Battery Saving Tips | Follow me on Twitter

Checking emails using Get Account Info function

When using the "Get Account Info" function to check and delete emails on POP servers, the first message in the display list always shows no information regarding that message.
Resorting the list has no effect. While it will allow me to determine what the "mystery message" is by moving it to a different location on the list, the top message in the resorted list remains blank as far any information about it is concerned. The two screen shots show what I'm talking about. The first one is of the original list - the second one after changing the sort. As you can see, in both cases, the only information available about the message is the date stamp.
This is an absolutely reliable occurrence with POP servers. It may also happen on IMAP servers, but I have no email accounts on IMAP servers with which to test it. I've submitted a bug report to Apple, but if anyone here has any suggestions, it would be much appreciated.

It happens across all accounts. Anyone here should be able to replicate this just by checking their email on the server using the "get account info".

Can't get pan to use more than 4 connections/server

My ISP has a news service that I users can access with a max of 20 connections per user.
I've been trying to use pan to download some file from this server, but I can't get it to use more than 4 connections.
On the pan web site it says to go to the NNTP menu,but I just can't find it.
What's up? Am I blind?

Have you overriden the doPost() method in ViewFormData? If not I think that you get this error message as a default
doGet() and doPost() should do the same thing so have one call the other

Facing severe problem in IE10 of automatically getting clicked on "use a proxy server" every 5 minutes in LAN Settings whereas it is not required to use any proxy server at all when directly connected through ISP broadband.

Using Window 8 Pro with IE 10 but facing tremendous problem in LAN settings. Every 5 minutes, it automatically gets clicked on "Use a Proxy Server for the LAN" and am unable to open any page unless the said setting is unclicked. The same applies
while using Chrome or Firefox browsers.... none of the browsers behave properly and have to repeatedly unclick on proxy server settings (in IE or Chrome) and change settings on Firefox.
Any suggestions to get rid of this problem...??? Thanks

Hi,
It seemed that some malware changed your registry which make proxy server enabled.
Did you install any proxy agent software recently? If you did, please try uninstalling it now. And then make a full scan
with malware removal tool.
http://www.microsoft.com/security/pc-security/malware-removal.aspx
Or locate to registry,
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings, set "ProxyEnable" = dword:00000000.
For more information, you can refer to
http://support.microsoft.com/kb/819961
Andy Altmann
TechNet Community Support

Can't get the current bitrate info use SMPTE-TT Plugin

Using OSMF2.0 to stream a smil title.
Add the MediaPlayerCapabilityChangeEvent.IS_DYNAMIC_STREAM_CHANGE event listener, after the event dispatch then add the DynamicStreamEvent.SWITCHING_CHANGE event listener.
The bitrate info can be report, normal. But after I add the SMPTE-TT plugin and load it like this:
var pluginResource:MediaResourceBase = new PluginInfoResource(new SMPTETTPluginInfo);mediaFactory.loadPlugin(pluginResource);
The title can be stream correct and the quality of the video can be set by the bandwidth, but only the DynamicStreamEvent.SWITCHING_CHANGE event can not be dispatch, so I can't get the current bitrate info.
I debug it in the OSMF source code and find the issue in the org.osmf.elements.compositeClasses.ParallelDynamicStreamTrait class line 323
FYI:
onSwitchingChange function that the numChildrenSwitching property always 0, so it can not call the setSwitching function and can not dispatch DynamicStreamEvent.SWITCHING_CHANGE event.
So, I add some changes from line 333 to line 336 and it has be fix:
Environment:Flex SDK 4.6 + flash player 11.8.
I don't know it is a bug in the OSMF framework and I want to get more info about it.
Thanks.

can you turn off the message pane (F8) between restarts? I am guessing it will turn on again as well.

TS4020 I get "server error" when I try to use icloud on my Windows 7 pc

I get "server error" when I try to use icloud.1 on my Windows 7 pc
How do I resolve this problem?

Hi doggywag,
Yes, you must have an iOS device or a Mac to create an iCloud account.
Cheers,
GB

General Warning: could not get server configuration in ldap, using cached c

Guys,
desperately need some help here. I have an installation consisting of 4 mtas that speak to an ldap. I'm currently in the process of adding 2 more. I've added the fifth and there has been no problem whatsoever. I'm now trying to add the sixth. I install the software. There are no error messages as the software installs. It's able to see both the configuration and the user directories. Once this is finished I immediately go and run start-msg and for each component I get the message :
"General Warning: could not get server configuration in ldap, using cached configuration information".
I've tried pinging and tracerouting my ldap server with no problem, I can telnet/ssh to it. My server configuration is almost eaxctly the same as the fifth server. I make no other changes after the installation scripts finishes, yet it can't talk to the ldap.
I running IMS5.2p1 on a Solaris 8 SPARC server.
Thanks
Ali

That error message only comes up when the server can't get to the config ldap server on startup. There's no other time when you see this.
There is either a mis-configuration of your server, or of your ldap, or you just can't get there from here.
Why are you installing 5.2p1, now? 5.2p2 has been out for over a year. ..
6.0 has been out for well over a year, and 6.2 has been out for many months, now. I hate to see you installing old software, when new is available.

Can I get the version info using the SDK?

Can I get the verion info from the SDK (Web Services SDK or Enterprise SDK)? For instance, for BOE XI R2, I can get some info like this "boexir2", so that I know jar files are for BOE XI R2. If this info can be retrieved, could you please tell me how I should do? Thanks.

Sure, but the odds are that you'll find the regular non-upgrade boxed version for less than the upgrade price, especially as we get nearer the holidays.

I bought a new imac running Loin and Office 2011. The server we use to access emails runs exchange 2003 and my IT person says the imac is not compatible with the server. The server does not want to let me access using any email software.

I bought a new imac running Loin with Office 2011. I am the only mac in the office and the Server we use to access emails runs exchange 2003 and my IT person says the imac is not compatible with the server. The server does not want to let me access using any email software other than webmail access through our website. It looks as though 2011 is not compatible with 2003 per some searches online, but what are some options I have to gain full access again? I purchased parallels in hopes that this my help and I am able to use remote desktop connection to log on to server but can not drag and drop files I need. There is a shared drive on that Server we all use to exchange files.
The two main issues are gaining access to my email again and ability to drag and drop files from mac to pc. I hope this is enough info to get some solutions.
PS - IT person says my iMac's IP is what his server does not understand so that is why I can not login.

Office 2011 is not compatbile with Exchange 2003.
I suggest you post further Office related questions on Microsoft's own forums for their Mac software:
http://answers.microsoft.com/en-us/mac

I accidentally erased my Sync server info by changing my Sync Key, can I request to restore a server's back-up of my bookmarks?

When I automatically upgraded to FF4.0, beta 8, my Sync stopped working. Having trouble connecting, I accidentally change my Sync Key which I understand erased all my server info. I can link now and see all my History, but I have lost my Bookmarks. Can they be restored from a server back-up?

Hi WHY IS THIS HAPPENING!
I have a couple of articles here that should be able to help you work with this issue. The first article I want to send your way explains some information about using your iPod touch with multiple computers and multiple libraries. That article can be found here:
Using iPhone, iPad, or iPod with multiple computers
http://support.apple.com/kb/ht1202
Next, in order to get your iPod touch working, you will need to restore from the backup. This article should help you restore from the backup you have made:
iOS: How to back up and restore your content
http://support.apple.com/kb/ht1766
And if you have trouble restoring from the backup, you should see the steps in this article:
iOS: Unable to update or restore
http://support.apple.com/kb/ht1808
Lastly, you can find information on how to move your iTunes library from your old computer to a new computer right here:
iTunes: How to move your music to a new computer
http://support.apple.com/kb/ht4527
Thanks for coming to the Apple Support Communities!
Regards,
Braden

Get URL info

I am building a file that will called a stored function in my DB, passing dynamic emp info to the function. P
ie.
select 'http://server1.test.org:9000/pls/apex/#OWNER#.sis_express_base.display_student_picture?l_fk_student_id=' || B.FK_STU_BASE
from stu_base B
What I don't want to do is hard-code my server info in the URL ''http://server1.test.org:9000/'. I want to grab that based on the the URL info from page I am currently on. Is there anyway to do that?

bobmagan wrote:
Thanks.
Your talking about doing something like this:
'http://' || owa_util.get_cgi_env('http_host')
|| '/'
|| owa_util.get_cgi_env('script_name')
|| '/'
|| owa_util.get_cgi_env('path_info')
|| '/'
|| owa_util.get_cgi_env('query_string')
Is there a way to get everything at once?What webserver are you using? If Apache, then you might be able to use SetEnv to create a new CGI env var that contains exactly what you want since it doesn't exist by default... http://httpd.apache.org/docs/2.2/mod/mod_env.html#setenv
Then you need to use PlsqlCGIEnvironmentList to access it from owa_util...
http://docs.oracle.com/cd/B14117_01/server.101/b12255/confmods.htm#1028003
For example there is already an variable called REQUEST_URI that gets you closer to what you want. You'd need to add the following to your dads.conf to access it...
PlsqlCGIEnvironmentList REQUEST_URI
Update: SetEnv can't do it either as it only lets you set a variable for the entire instance, not per request. Just concatenate or otherwise you could try SetEnvIf or mod_rewrite has a thing apparently too which looks even more promising and even more fandangled.
Edited by: Capt. Egg on 21/05/2012 22:02

Get SERVER info using ud32

Similar Messages

Maybe you are looking for