Get Spool number for Smartform

Hi All,
I have created a smartform to print the POs created through ME21n. I have changed the config to use this smartform when a PO is changed/created. Everything is working fine. All I need is the spool number for each of the PO this is being printed. Can you please let me know how I can achieve this through the FM for smartform?
I AM USING 4.6C.
This is how I am using the function module
CALL FUNCTION FM_NAME
       EXPORTING
            CONTROL_PARAMETERS = CONTROL
            OUTPUT_OPTIONS     = OUTPUT
            USER_SETTINGS      = ' '
            EKKO               = L_DOC-XEKKO
            PEKKO              = L_DOC-XPEKKO
            DRUVO              = L_DRUVO
       IMPORTING
            JOB_OUTPUT_OPTIONS = JOB_OUTPUT_OPTIONS
       TABLES
            EKPO               = L_DOC-XEKPO
            PEKPO              = L_DOC-XPEKPO
            XAEND              = IT_XAEND
       EXCEPTIONS
            FORMATTING_ERROR   = 1
            INTERNAL_ERROR     = 2
            SEND_ERROR         = 3
            USER_CANCELED      = 4
            OTHERS             = 5.
All your inputs are greatly appreciated.
Thanks!
Sandeep

Hi,
JOB_OUTPUT_OPTIONS is of type SSFCRESOP, which does not have a SPOOLIDS field/table.
I knwo that the function module SSF_CLOSE returns the spool id in a table. But, I am not sure how to use SSF_OPEN and SSF_CLOSE. Can you please throw some light on how I can use these to get the spool numbers?
This is what I have right now.
JOB_OUTPUT_OPTIONS-TDDEST = ITCPO-TDDEST.
JOB_OUTPUT_OPTIONS-TDNEWID = 'X'.
L_FORMNAME = TNAPR-FONAM.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
       EXPORTING
             FORMNAME           = TNAPR-SFORM
            FORMNAME           = L_FORMNAME
       IMPORTING
            FM_NAME            = FM_NAME
       EXCEPTIONS
            NO_FORM            = 1
            NO_FUNCTION_MODULE = 2
            OTHERS             = 3.
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION FM_NAME
       EXPORTING
            CONTROL_PARAMETERS = CONTROL
            OUTPUT_OPTIONS     = OUTPUT
            USER_SETTINGS      = ' '
            EKKO               = L_DOC-XEKKO
            PEKKO              = L_DOC-XPEKKO
            DRUVO              = L_DRUVO
       IMPORTING
            JOB_OUTPUT_OPTIONS = JOB_OUTPUT_OPTIONS
       TABLES
            EKPO               = L_DOC-XEKPO
            PEKPO              = L_DOC-XPEKPO
            XAEND              = IT_XAEND
       EXCEPTIONS
            FORMATTING_ERROR   = 1
            INTERNAL_ERROR     = 2
            SEND_ERROR         = 3
            USER_CANCELED      = 4
            OTHERS             = 5.
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ELSE.
    SELECT RQIDENT RQOWNER RQCRETIME FROM TSP01 INTO TABLE IT_TSP01
    WHERE RQOWNER = SY-UNAME.
    IF SY-SUBRC = 0.
      SORT IT_TSP01 BY RQCRETIME DESCENDING.
      READ TABLE IT_TSP01 INDEX 1.
      SPOOLID = IT_TSP01-RQIDENT.
      PERFORM PROTOCOL_UPDATE USING '320' SPOOLID SPACE SPACE SPACE.
    ENDIF.
ENDIF.
The SELECT part is wrong, I need to replace this code to get the correct spool numbers.
Thanks in advance.
Sandeep

Similar Messages

Get spool number for delivery output.

Hi,
Is it possible to get the spool number for a print output type generated for a delivery? I use the Tcode VL02N to view the output types generated for a delivery. I want to use this spool number to generate a PDF file.

Hi,
The below mentioned link shows how to get the Spool Request Number for the Output type and convert it to PDF and download. It uses mainly NAST and CMFP table.
Link: http://wiki.sdn.sap.com/wiki/display/ABAP/GettingSpoolRequestNumberfortheOutput+type

Getting only one spool number for every print out

hi guys,
when i execute my customize program i suppose to get a form in my screen, showing customer statement, when I exicute customer A out put as expected with 5 pages but after that if i exicute customer B which is supposed to be 3 pages but I am getting 8 pages which is including first out put also, its repeating same spool number for every thing and keep on adding every page , please let me know where to see for this ??
for spool request RS38L_FNAM
and to display 'COM_SE_SPOOL_DISPLAY'

Change ur table declaration as shown below, replace the word <b>TYPE</b> with <b>LIKE</b>
DATA: BEGIN OF i_final OCCURS 0,
srno TYPE i, " Serial no
anln1 LIKE anla-anln1, " asset code no
txt50 LIKE anla-txt50, " Brief Description of Assets
txa50 LIKE anla-txa50, " Further Description
ktogr LIKE anla-ktogr, " Asset Class No.
ktgrtx LIKE t095t-ktgrtx, " Asset Class Name
sernr LIKE anla-sernr, " Serial Number
invnr LIKE anla-invnr, " Assets Identification No
menge LIKE anla-menge, " Qty
meins LIKE anla-meins, " UOM
raumn LIKE anlz-raumn, " Location
lifnr LIKE anla-lifnr, " Vendor
liefe LIKE anla-liefe, " Capitalisation Date
aktiv LIKE anla-aktiv, " Date put to use
g_kansw LIKE anlc-kansw, " Opening Gross Block
b_kansw LIKE anlc-kansw, " Additions during the period
b_answl LIKE anlc-answl," Deductions/ Adjustmentsduring d period
g_total LIKE bsis-dmbtr, " Closing Gross Block
d_open LIKE anlb-afabg, " Dep on opening block
d_sold LIKE anlb-afabg, " Dep on assets sold/written off
d_add LIKE anlb-afabg, " dep on additions during the period
afabg LIKE anlb-afabg, " Total dep for the period
cd_sold LIKE bsis-dmbtr, " *** Dep on assets sold
cd_asst LIKE bsis-dmbtr, " *** Dep on assets written off
cd_dep LIKE bsis-dmbtr, " Total *** dep on deductions
ccd_dep LIKE bsis-dmbtr, " Closing Acc Dep
a LIKE bsis-dmbtr, " WDV of assets sold
b LIKE bsis-dmbtr, " Selling Price
c LIKE bsis-dmbtr, " Profit / (Loss) on sale
d LIKE bsis-dmbtr, " Loss on write off
e LIKE bsis-dmbtr, " Opening WDV
f LIKE bsis-dmbtr, " Closing WDV
END OF i_final.

Create spool number for sap script

how to create a spool number for a SAP script. What is the program name which we should modify to write the code logic for spool creation for the tcode ME9F ?

Hi,
Spool Request in Transaction SP01 and there by generated a Spool Request Number.
Spool request is a document for which a print function has been selected. However, it has not yet been output to a printer or another device. The output data for the print document is stored partly formatted in a data store until an output request is created, that is, until it is sent to a particular output device.
The spool system uses a spool request to store the print data temporarily and to access it. The data is stored in a temporary format. You can also display the print document. The system automatically assigns a 10-digit ID number to a spool request.
Output request: From the point of view of the SAP spool system, an output request outputs the print data of a spool request to a particular output device.
Multiple output requests may exist for a single spool request. Each represents an instance of the output of the same spool request. Each of these output requests may have different attributes, such as the target printer or number of copies.
By differentiating between spool request and output requests, the spool system provides a means of storing the data temporarily.
You will get the spool no. in the parameter JOB_OUTPUT_INFO after calling the smartform function module in print program. The spool ids of the prints is stored in table JOB_OUTPUT_INFO-SPOOLIDS.
Also if this spool is being generated internal to your program, then SY-SPONO should have the value.
You need to create an Adobe Form Application, get the data from the backend based on Spool request number.
You can create an application in Webdynpro, wherein when you click on a button and the Adobe Form is displayed with all the data from the backend and you should be able to print it.
Does that answer your question ?
Cheers,
PANKAJ

How to get spool number when using SUBMIT job

Hi All,
I am calling standard program using SUBMIT through JOB as below. Now I need spool number for this job to covert the output to PDF and send to mail. See the below code and guide me.
CALL FUNCTION 'JOB_OPEN'
EXPORTING
    jobname          = name
IMPORTING
    jobcount         = number
EXCEPTIONS
    cant_create_job = 1
    invalid_job_data = 2
    jobname_missing = 3
    OTHERS           = 4.
IF sy-subrc = 0.
data: Zscreen type table of RSPARAMS with header line.
   Zscreen-selname = 'PM_AENNR'.
   Zscreen-kind = 'P'.
   ZSCREEN-LOW = '500000000125'.
   APPEND ZSCREEN.
SUBMIT RCC00130 WITH selection-table Zscreen TO SAP-SPOOL
                    SPOOL PARAMETERS print_parameters
                   WITHOUT SPOOL DYNPRO
                    VIA JOB name NUMBER number
                    AND RETURN.
IF sy-subrc = 0.
    CALL FUNCTION 'JOB_CLOSE'
      EXPORTING
        jobcount             = number
        jobname              = name
        strtimmed            = 'X'
      EXCEPTIONS
        cant_start_immediate = 1
        invalid_startdate    = 2
        jobname_missing      = 3
        job_close_failed     = 4
        job_nosteps          = 5

Hi,
Do this way, first get print parameters by using function module 'GET_PRINT_PARAMETERS'
CALL FUNCTION 'GET_PRINT_PARAMETERS'
    EXPORTING
      destination    = 'LP01'
      list_name      = 'TEST'
      list_text      = 'SUBMIT ... TO SAP-SPOOL'
      immediately    = ' '
      line_size      = '1023'
      no_dialog      = 'X'
    IMPORTING
      out_parameters = wa_pri_params
      valid          = w_valid.
If it returns success then
    IF w_valid EQ 'X'.
      CONCATENATE 'R'
                   w_tabix
                   sy-datum+4(4)
                   sy-uzeit INTO
                   wa_pri_params-plist.
    ENDIF.
    SUBMIT rprccc00
           WITH firmennr = w_cid
           WITH bel_clus = 'X'
           WITH testlauf = ' '
           WITH not_lokl = 'X'
           WITH file_in = w_arc_out
           TO SAP-SPOOL WITHOUT SPOOL DYNPRO
           SPOOL PARAMETERS wa_pri_params AND RETURN.
    COMMIT WORK AND WAIT.
SELECT rqident
         FROM tsp01
         INTO w_rqident
         UP TO 1 ROWS
         WHERE rq2name = wa_pri_params-plist.
ENDSELECT.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
    EXPORTING
      src_spoolid     = w_rqident
      no_dialog       = 'X'
      dst_device      = 'LP01'
      pdf_destination = 'X'
    TABLES
      pdf             = t_pdf.
Hope it solves your problem
Regards
Krishna

GET spool number according to Message type (nast-kschl)

hi all ,
i want to get the oldest spool number for a message type and PO number via abap program
thinks in advancs.
karim .

hi,
field dsnam of the table nast can give spool request name..
may be this field can help u in solving ur issue ..
regards,
prashanti

How to crate a spool number for the abap program

hi
how to create a spool number for the abap program

Hi,
Check this thread
how to create a spool requset for 'z program'.
Regards,
Satish

SPOOL REQUEST FOR SMARTFORM

HI experts,
how to create the spool request for smartform. can anyone help me. give me the complete procedure.
thanks in advance for ur responce.

The user which send the smartform to the spool (probably wf-batch) needs an output device. You can maintain this in SU01.
Just look at sample code:
1.Send Smart Form output to spool using the FM <ws_formname> (FM name derived from the export parameters of SSF_FUNCTION_MODULE_NAME).
//Start of Code Sample
DATA : ws_formname TYPE rs38l_fnam.
TYPES: BEGIN OF ty_script,
trans_ref LIKE eanl-anlage,
cont_ref TYPE e_edmideservprovcontractid,
trans_code TYPE char05,
trans_reason TYPE char05,
market_sect LIKE eanl-zzmktscode,
efffrm_date LIKE sy-datum,
mprn LIKE iflot-zzmprn,
mlc TYPE char01,
subbuild_no(40) TYPE c,
build_no LIKE adrc-str_suppl1,
dep_fare LIKE adrc-str_suppl3,
post_town LIKE adrc-city1,
post_code LIKE adrc-post_code1,
asset_code LIKE egerh-kombinat,
paymnt_code(2) TYPE c,
model_code LIKE equi-typbz,
manuf_code LIKE equi-herst,
year_manuf LIKE equi-baujj,
serial_no LIKE equi-sernr,
meter_code TYPE char01,
meter_mech(2) TYPE c,
meas_cap TYPE zmeasur_cap,
role_code TYPE char03,
market_name LIKE eservice-serviceid,
status TYPE char01,
END OF ty_script.
DATA: i_scriptdata TYPE STANDARD TABLE OF ty_script
WITH HEADER LINE.
DATA: wa_output_options TYPE ssfcompop,
wa_control_params TYPE ssfctrlop,
wa_spoolnum TYPE rspoid,
wa_printdata TYPE efg_strn_printdata.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = 'Your Form Name'
IMPORTING
fm_name = ws_formname
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3.
CALL FUNCTION ws_formname
EXPORTING
control_parameters = wa_control_params
c = wa_printdata
IMPORTING
job_output_info = wa_job_output_info
TABLES
i_scriptdata_input = i_scriptdata(Your Script Data)
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
MOVE wa_job_output_info-spoolids] TO wa_spoolids[.
READ TABLE wa_spoolids INTO wa_spoolnum INDEX 1.
IF sy-subrc = 0.
DATA :id LIKE tsp01-rqident.
MOVE wa_spoolnum TO id.
ENDIF. .
Comments-Id Contains the Spool Request for the given smart form
//End of Code Sample
Convert Smart Form Output to Raw
Format
2.Convert the Spool Output to OTF using the FM RSPO_RETURN_SPOOLJOB.
//Start of Code Sample
data i_soli LIKE soli occurs 0 with header line.
CALL FUNCTION 'RSPO_RETURN_SPOOLJOB'
EXPORTING
rqident = id
desired_type = 'OTF'
TABLES
buffer = i_soli
EXCEPTIONS
no_such_job = 1
job_contains_no_data = 2
selection_empty = 3
no_permission = 4
can_not_access = 5
read_error = 6
type_no_match = 7
OTHERS = 8.
Comments- i_soli contains the OTF data
//End of Code Sample
3.Convert the OTF using FM
SX_OBJECT_CONVERT_OTF_RAW.
DATA content_bin TYPE solix_tab.
DATA objhead TYPE soli_tab.
DATA i_soli_tab TYPE soli_tab.
DATA boolean TYPE sx_boolean.
DATA length TYPE so_obj_len.
LOOP AT i_soli.
APPEND i_soli TO i_soli_tab[].
ENDLOOP.
CALL FUNCTION 'SX_OBJECT_CONVERT_OTF_RAW'
EXPORTING
format_src = 'OTF'
format_dst = 'RAW'
CHANGING
transfer_bin = boolean
content_txt = i_soli_tab
content_bin = content_bin
objhead = objhead
len = length
Convert Smart Form Output to Raw
Format
EXCEPTIONS
err_conv_failed = 1
OTHERS = 2.
REward points if useful.

Same spool number for same job on mutilple days

Hi all,
We have daily Batch job which runs at 9:00 PM for a 1 variant and with 2 variant after first job is done.
On 11/05 we have got one spool number 845411 for the spool and on the 11/09 for the same job we got the same spool number for 2 jobs , and the data is also showing as 11/05 only and the spool creation date is showing as 11/05 and modified on 11/10...
This is happening for only 1 batch job, we have checked the other jobs all are fine with different spool #, we have checked spool number range and every thing is fine.
Please suggest what can be the reason for this scenario...
Thanks,
Subhash.G

Hi Subhash,
Check the print parametes of the job, can be seen under steps --> double click on program --> print properties. There we have option to select new spool number.
So every time the job runs it will have a new spool number. Hope this helps.
Regards
Sushant

Where to get serial number for photoshop cs2?

Hi! where do i get serial number for photoshop cs2 free dl? Thanks

Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3
CS2 is not free. The download is for existing owners of CS or CS2.

How do i get serial number for my element12 i have the redemption code

how do i get serial number for my element12 i have the redemption code

Hi ylee0y0te,
Please follow the steps here.
1. http://helpx.adobe.com/x-productkb/global/redemption-code-help.html
2.http://helpx.adobe.com/x-productkb/global/find-serial-number-student-teacher.html
3.http://helpx.adobe.com/x-productkb/global/find-serial-number.html
Hope it helps you.
Regards,
Rajshree

Get spool number

hello experts,
how will i get the spool number of an output in transaction VT03N? i have to get the spool number because i will use it in the print program configured in the transaction's output.
please help me with this.
thank you.

hi march,
first goto se38 then any prg execute(F8).
find print (List in menubar)
click print then u can get spool number with last four numbers. u remember the number.
then goto se38 pgm name is RSTXPDFT4. its executed.
u put spool number(last four numbers) only.
its executes then save as extension with pdf in ur system.
Reward if useful,
Regards,
S.Suresh.

I cant get a number for my ipod on iMessage?

I'm having troubles, I can't get a number for my ipod on iMessage. Like I send & receive texts from my email but I cant get a phone number. If I try to add it on the field it wont let me put it in. So what do I do?

An iPod (and iPad) will only have a phone number for Messages (and FaceTime) if the same ID is used on an iPhone with iOS 6
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage

Where can I get serial number for Lightroom to start using it?

Hello. I have just created Adobe CC account and purchased a Photography membership plan for Individuals. The price is 9,99 per month and this sum has already been taken from my card. On this page (https://accounts.adobe.com/plans) I can see the confirmation that I have obtained this plan.
Now I want to use Lightroom but it asks me for serial number. After reading some help I found that I should get serial number from here - https://www.adobe.com/account.html. But on this page it says that "You have no registered products.". So I see no serial number.
So there's a simple question - where can I get serial number for Lightroom to start using it?

Jeff, thanks for your answer but it doesn't help. I've successfully passed all checks on page Sign in, activation, or connection errors | CS5.5 and later . My internet connection is ok, hosts file ok, certificates ok, etc. It's not a source of the problem.
I've found that on page Adobe ID it says that I have free membership. Somehow it turns that my purchased Photography membership plan is not there at all. in order to proof that I really purchased it please see screen from my internet-banking page below:
Why it is displayed only free membership in my account page and not Photography subscription which was already paid?

I cant get the number for imessage

I cant get the number for imessage
i press receive at and it only gives me my email

An iPod uses the email address that you assign for Messages to receive messages. It is usually your Apple ID email address but you can add others to.

Get Spool number for Smartform

Similar Messages

Maybe you are looking for