Getting authorization error while configuring UWL.

Hii All,
I want to configure UWL on my EP.
Now i want to know that whether its required to have SSO on place before implementing UWL.
Do i need administrative right on R3 also, to register the system in UWL administration.
i have administrative right on EP, but not on R3.
Which roles i require on R3 to configure UWL on EP, because while trying to register my R3 system in UWL administration i a getting below error:
(Connector) :com.sap.netweaver.bc.uwl.connect.ConnectorException:Tue Mar 06 14:06:20 GMT 2012
(Connector) :com.sap.portal.connectivity.destinations.PortalDestinationsServiceException:User is missing credentials for connecting to alias <System Alias>. Contact your system administrator.
I have SAP_BC_BMT_WFM_UWL_ADMIN and SAP_BC_UWL_ADMIN_USER roles on R3.
I am also not able to test my system successfully, but when i created a transaction iView and used this system, then it is successfully executed.
I also tested a T-Code from System admin>>support>>SAP application>>Test and configuration tool>>SAP Transaction>>Selected System and given tcode and GO, it is also opening my T-Code, when i am using SAP GUI for HTML, but again i am getting error when i am selecting SAP GUI for Windows.
Any help will be appreciated.
Regards,
Amar

Hi,
At least I've seen this same error when my user in portal did not have permission to the system object. So, go to check the system object and check its permissions. Probably they are OK, if you are admin, but worth to check.
As far as I know, you should not need the SSO for configuring UWL. But make sure that you have at least some kind of working user mapping defined for you user in portal UME.
Also, make sure that you are not seeing any short dumps in transaction ST22 for your user in backend.
The error message looks like that you might be having some permission/authorisation error in portal side, but it should be straightforward to do simple authorization trace in backend too and see if you are missing some authorisations. Of course the easiest way to check a possible missing authorization issue is to ask SAP_ALL profile for a moment for your user - then at least your auth. level is enough.
Regards,
Karri

Similar Messages

Getting an error while configuring VMM for System Center 2012. error - An internal error has occurred trying to contact an agent on the WIN-NTJU8CNU server: : . Ensure the agent is installed and running.

Hi,
I am trying to install "System Center 2012 - Virtual Machine Manager by Using a Pre-Configured VHD".
I downloaded install guide & the binaries from http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=10712
I have followed the installation document & getting an error while configuring VMM for System Center 2012.
error details from log file given below:
01:12:24:VMMPostinstallProcessor threw an exception: Threw Exception.Type: Microsoft.Carmine.WSManWrappers.WSManProviderException, Exception.Message: An internal error has occurred trying to contact an agent on the WIN-NTJTNEJ1UCN.mydomain.com server: : .
Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.
01:12:24:StackTrace:   at Microsoft.Carmine.WSManWrappers.ErrorContextParameterHelper.ThrowTranslatedCarmineException(WsmanSoapFault fault, COMException ce)
   at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.RetrieveUnderlyingWMIErrorAndThrow(SessionCacheElement sessionElement, COMException ce)
   at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Invoke(String actionUri, WSManUri targetUri, Hashtable parameters, Type returnType, Boolean isCarmineMethod, Boolean forceResponseCast)
   at Microsoft.Carmine.WSManWrappers.AgentManagement.AssociateLibrary(WsmanAPIWrapper wsmanObject, String CertificateSubjectName, String& ExportedCertificate, ErrorInfo& ErrorInfo)
   at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.AssociateAgentServer(String fullyQualifiedServerName)
   at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.AssociateDefaultLibraryServer()
   at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.SetupLibraryShare()
   at Microsoft.VirtualManager.Setup.InstallItemCustomDelegates.PangaeaServerPostinstallProcessor()
01:12:24:InnerException.Type: System.Runtime.InteropServices.COMException, InnerException.Message: There is a time and/or date difference between the client and server.
01:12:24:InnerException.StackTrace:   at WSManAutomation.IWSManSession.Invoke(String actionUri, Object resourceUri, String parameters, Int32 flags)
   at Microsoft.Carmine.WSManWrappers.MyIWSManSession.Invoke(String actionUri, Object resourceUri, String parameters, Int32 flags)
   at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Invoke(String actionUri, WSManUri targetUri, Hashtable parameters, Type returnType, Boolean isCarmineMethod, Boolean forceResponseCast)
01:12:24:ProcessInstalls: Running the PostProcessDelegate returned false.
01:12:24:ProcessInstalls: Running the PostProcessDelegate for PangaeaServer failed.... This is a fatal item. Setting rollback.
01:12:24:SetProgressScreen: FinishMinorStep.
01:12:24:ProcessInstalls: Rollback is set and we are not doing an uninstall so we will stop processing installs
I have completed MSSQL server configuration and while configuring VMM the below error displayed in the wizard:
An internal error has occurred trying to contact an agent on the WIN-NTJTNEJ1UCN.mydomain.com server: : .
Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.
I have checked that the following services are running:
1) Verified WS-Management srvice 2) MSSQL server + MSSQL (agent) 3)SC VM Manager Agent 4) Windows management instrumentation .
I have joined the VM (on which installing SC VMM) in a domain(as per install guide) and installing VMM using domain account & it is in local Administrators group.
Also I would like know if there is any stand alone SC VMM installer. If yes then please let me know the installer location & install guide.
thanks.
====

Have you installed AppController on the same machine with VMM?

Authorization error while configuring TREX for HR - talent search

Hi All
HR team is performing talent search configuration and they are using Tcode ESH_Cockpit. Here while creating, they get this error "Error while preparing".
For one of the failed connectors (eg: HRTMC AES Documents), job log is as given below:
24.10.2011 08:34:16 Job started
24.10.2011 08:34:16 Step 001 started (program ESH_SE_CONNECTOR_MOD_BGD, variant &0000000000027, user ID T710752)
24.10.2011 08:34:50 Authorization check CP_USER_ALL:
24.10.2011 08:34:50 Path-based authorization check CP_USER_ALL has wrong data
24.10.2011 08:34:50 Authorization check CP_USER_ALL:
24.10.2011 08:34:50 Path-based authorization check CP_USER_ALL has wrong data
24.10.2011 08:34:50 Authorization check CP_USER_ALL:
24.10.2011 08:34:50 Path-based authorization check CP_USER_ALL has wrong data
24.10.2011 08:34:50 Authorization check TB_PLOG, auth. obj. field assignments:
24.10.2011 08:34:50 Not all authorization fields are mapped to node fields or constants
24.10.2011 08:34:50 Authorization check TB_PLOG, auth. obj. field assignments:
24.10.2011 08:34:50 Not all authorization fields are mapped to node fields or constants
24.10.2011 08:34:50 Authorization check TB_PLOG, auth. obj. field assignments:
Here they have SAP_ALL assigned and even then they are getting above authorization related error .
Your advise will be really helpful. Thanks in advance for your help.
Regards,
Aditya

TREX also uses gateway programs.
Check with your basis folks or tcode SMGW (go to --> expert functions --> external security) to see whether it is restricted.
There are also some SAP notes about this...
Cheers,
Julius

Getting a Error when Configuring UWL in QAS Portal

Hi Experts,
When I Configuring the UWL in System Admin-->Syetem Configuring -->UWL Administrator with the Administrator User I am getting the Error
System SAP_SRM: Tue Feb 08 20:06:17 NZDT 2011
: No User mapping set up for user USER.PRIVATE_DATASOURCE.un:Administrator system :SAP_SRM
When I Configuring the same from User who have in the backend I am getting the error.
System SAP_SRM: Tue Feb 08 20:05:54 NZDT 2011
(Connector) :com.sap.portal.connectivity.destinations.PortalDestinationsServiceException:User is missing credentials for connecting to alias SAP_SRM. Contact your system administrator.
Can anyone help me in this issue.

hi,
-This kind of issue that you are facing looks like a known issue when
setting up the UWL connection to the backend, so we suggest you to
ensure that you followed the steps from SAP Note #1133821 and
that the username specified on step 7 is valid and has the requested
role assined?
1. Open the Visual Administrator.
2. Navigate to the Cluster -> <INSTANCE ID> -> Server<SERVER NAME> ->
Services -> Destinations.
3. Double click on Destinations node.
4. Under Destinations select RFC node.
5. Click on "New" button.
6. In the "Enter destination name:" input dialog give as destination
name the following: <SYSTEM ALIAS>$<UWL CONNECTOR TYPE>
(e.g.: BXTCLNT100$WebFlowConnector )
(7. Fill in the following fields: System ID, Message Server, Logon
Group,Language, Client, Username, Password. The other fields remain
default. (Make sure the user you specify has "SAP_BC_UWL_SERVICE" role
assigned. This is needed to fetch the technical informations from the
backend.)
8. Click on the "Save and Test" button
9. "Successfully connected to system <SYSTEM ID> as user<Username>" info
dialog has to appear.
10. In other cases check the settings again and check the connection to
the backend system.
Hope that those info have helped you to solve the issue,
Would you kindly confirm this message giving us your valuable feedback?
It's important and help us to improve the service.
Thanks a lot for your cooperation, it really made the difference.
Please remember to evaluate the replays, this incentive the SDN to keep growing,
regards,
Fabio

I am getting an error while configuring the ibots

hi all.
when i was Execute the CryptoTools utility to add the Scheduler Administrator credentials to the Presentation Services Credential Store:
i was getting an error .....
Run time Error
program: c:\oracle\web\bin\cryptotools.exe
Applications has require the runtime to terminate it in unusal way
please applications's support team for more information..
What is the problem , please let me know ,
Thanks

KUP-04063: unable to open log file EXT_ZPP0A871_6738.log
OS error Permission deniedThe error seems quite clear... what's you OS and Oracle version ?

Getting error while configuring OIM11gR2 on windows 64 bit machiine

Hi,
I am getting below error while configuring OIM 11gR2: INST-6193: The attribute JpsContextName in MBean com.oracle.sdp.messaging:Location=soa_server1, name=ServerConfig, type=SDPMessagingServerConfig,Application=usermessagingserver not found. Check the SOA version comparability.
My system details are: Windows 7 64 bit
Installables downloaded from Oracle cloud:
Oracle WebLogic Server 11gR1 (10.3.6) Generic and Coherence
Oracle SOA Suite 11g Patch Set 5 (11.1.1.6.0) (Part 1 of 2)
Oracle SOA Suite 11g Patch Set 5 (11.1.1.6.0) (Part 2 of 2)
Oracle Fusion Middleware Repository Creation Utility 11g (11.1.1.6.0) for Microsoft Windows
Oracle Identity and Access Management 11g (11.1.2.1.0) (Part 1 of 2)
Oracle Identity and Access Management 11g (11.1.2.1.0) (Part 2 of 2)
Oracle Database 11g Release 2 (11.2.0.1.0) for Microsoft Windows x64 (64-bit) (Part 1 of 2)
Oracle Database 11g Release 2 (11.2.0.1.0) for Microsoft Windows x64 (64-bit) (Part 2 of 2)
Please let me know if I have to apply some patches.
Regards,
Kalpana

you might want to look at this:
Installation and Configuration Issues for Oracle Identity and Access Management - 11g Release 2 (11.1.2.1)

Error While Configuring the Shared Service with Active Directory

Hi All,
I am getting a error while configuring MSAD with Shared Service, when entering the User Id and password and clicking next, the following error is displayed:
"EPMCSS-05180:Failed to validate Security configuration. Failed to connect. Invalid values for Base DN, User DN or Password. Enter valid value(s). Root Cause : [LDAP: error code 49 - 80090308: LdapErr: DSID-0C0903A9, comment: AcceptSecurityContext error, data 52e, v1db1]"
The AD user has the read access to the all users and group in Active Directory. If I use an Active Directory user with Admin privilege, It is getting connected.
But client is not ready to provide the Admin Access due to their internal policy and I also don't have any document which says admin privilege is required. According to the document,the user should have the following privileges only.
"The distinguished name of the user that Shared Services should use to bind with the user directory. This user must have search privilege on the RDN attribute within the DN. For example, in the dn: cn=John Doe, ou=people, dc=myCompany, dc=com, the bind user should have search access to the cn attribute.Special characters in User DN must be specified using escape characters. See “Using Special Characters” on page 46 for restrictions.
Example: cn=admin,dc=myCompany,dc=com
But I am getting confused with the statement "This user must have search privilege on the RDN attribute within the DN". Is it not search privillege?
Can anybody help me with required privilege for Active Directory user to configure with Shared Service.
Thanks in Advance,
Sunil

Thank you All,
i tried connecting using AD Browser from Microsoft, and it went in properly. then i found out that the AD Team here were giving a Wrong Credentials to connect, they Gave me HYP_OID which infact turned out to be a Principal name instead of a 'cn'.
after searching in the AD Browser i found the correct cn which is "Hyperion OID", then it went to the second Screen where now i am trying to search for the Users based on thier Job Nature.
Thank you for all the Support Guys, you both "Celvin" and "John" are the Top Guys under my Search list for any technical Assistance.
Thank you once again Friends....
Regards,
Sunil...
Shantan....

Dac error while configuring

Hello All,
I am trying to configure Dac on windows7 64 bit but getting the error...
Configuration: Windows7 64bit
Oracle DB: Oracle 11g
Dac Version : 10.1.3.4.1
Informatica: 9x
Obiee 11g
Already copy the file odjbc5.jar file into dac_home\bifoundation\dac\lib
Created the user Dac_rep with all the required privileges.
But still getting below error while configuring and testing:
MESSAGE:::The Network Adapter could not establish the connection
EXCEPTION CLASS::: java.sql.SQLException
oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:412)
oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:531)
oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:221)
oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:32)
oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:503)
java.sql.DriverManager.getConnection(DriverManager.java:582)
java.sql.DriverManager.getConnection(DriverManager.java:185)
com.siebel.etl.gui.login.LoginDataHandler$LoginStructure.testConnection(LoginDataHandler.java:514)
com.siebel.etl.gui.login.LoginDataHandler.testConnection(LoginDataHandler.java:386)
com.siebel.etl.gui.login.ConnectionTestDialog$Executor.run(ConnectionTestDialog.java:290)
::: CAUSE :::
MESSAGE:::The Network Adapter could not establish the connection
EXCEPTION CLASS::: oracle.net.ns.NetException
oracle.net.nt.ConnStrategy.execute(ConnStrategy.java:359)
oracle.net.resolver.AddrResolution.resolveAndExecute(AddrResolution.java:422)
oracle.net.ns.NSProtocol.establishConnection(NSProtocol.java:672)
oracle.net.ns.NSProtocol.connect(NSProtocol.java:237)
oracle.jdbc.driver.T4CConnection.connect(T4CConnection.java:1042)
oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:301)
oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:531)
oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:221)
oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:32)
oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:503)
java.sql.DriverManager.getConnection(DriverManager.java:582)
java.sql.DriverManager.getConnection(DriverManager.java:185)
com.siebel.etl.gui.login.LoginDataHandler$LoginStructure.testConnection(LoginDataHandler.java:514)
com.siebel.etl.gui.login.LoginDataHandler.testConnection(LoginDataHandler.java:386)
com.siebel.etl.gui.login.ConnectionTestDialog$Executor.run(ConnectionTestDialog.java:290)
::: CAUSE :::
MESSAGE:::Connection refused: connect
EXCEPTION CLASS::: java.net.ConnectException
java.net.PlainSocketImpl.socketConnect(Native Method)
java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
java.net.Socket.connect(Socket.java:519)
oracle.net.nt.TcpNTAdapter.connect(TcpNTAdapter.java:141)
oracle.net.nt.ConnOption.connect(ConnOption.java:123)
oracle.net.nt.ConnStrategy.execute(ConnStrategy.java:337)
oracle.net.resolver.AddrResolution.resolveAndExecute(AddrResolution.java:422)
oracle.net.ns.NSProtocol.establishConnection(NSProtocol.java:672)
oracle.net.ns.NSProtocol.connect(NSProtocol.java:237)
oracle.jdbc.driver.T4CConnection.connect(T4CConnection.java:1042)
oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:301)
oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:531)
oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:221)
oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:32)
oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:503)
java.sql.DriverManager.getConnection(DriverManager.java:582)
java.sql.DriverManager.getConnection(DriverManager.java:185)
com.siebel.etl.gui.login.LoginDataHandler$LoginStructure.testConnection(LoginDataHandler.java:514)
com.siebel.etl.gui.login.LoginDataHandler.testConnection(LoginDataHandler.java:386)
com.siebel.etl.gui.login.ConnectionTestDialog$Executor.run(ConnectionTestDialog.java:290)
Kindly help, already googled but no luck.
Thanks & Regards
Anu

Check your config.bat config
just in case refere this Oracle BI Solutions: DAC - Installation and Configuration v10.1.3.4.1 on Windows

SQM uploader error while configuring BizTalk Server

Hi,
I am getting following error while configuring BizTalk Server 2013 on Windows Azure VM
Log Name: Application
Source: Application Error
Date: 8/26/2013 1:08:46 PM
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: BizTalk2013VM
Description:
Faulting application name: SqmUploader.exe, version: 3.10.229.0, time stamp: 0x50fe35e2
Faulting module name: KERNELBASE.dll, version: 6.1.7601.18015, time stamp: 0x50b8479b
Exception code: 0xe0434352
Fault offset: 0x0000000000009e5d
Faulting process id: 0x988
Faulting application start time: 0x01cea27eec7ba1b4
Faulting application path: C:\Program Files (x86)\Microsoft BizTalk Server 2013\CEIP\SqmUploader.exe
Faulting module path: C:\Windows\system32\KERNELBASE.dll
Report Id: 2acf119c-0e72-11e3-9e61-00155d6120c3
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-08-26T17:08:46.000000000Z" />
<EventRecordID>32154</EventRecordID>
<Channel>Application</Channel>
<Computer>BizTalk2013VM</Computer>
<Security />
</System>
<EventData>
<Data>SqmUploader.exe</Data>
<Data>3.10.229.0</Data>
<Data>50fe35e2</Data>
<Data>KERNELBASE.dll</Data>
<Data>6.1.7601.18015</Data>
<Data>50b8479b</Data>
<Data>e0434352</Data>
<Data>0000000000009e5d</Data>
<Data>988</Data>
<Data>01cea27eec7ba1b4</Data>
<Data>C:\Program Files (x86)\Microsoft BizTalk Server 2013\CEIP\SqmUploader.exe</Data>
<Data>C:\Windows\system32\KERNELBASE.dll</Data>
<Data>2acf119c-0e72-11e3-9e61-00155d6120c3</Data>
</EventData>
</Event>
Any help will be highly appreciated.

Hi Nilesh,
Following article should help you:
http://social.technet.microsoft.com/wiki/contents/articles/11426.windows-azure-biztalk-services-resources-on-the-technet-wiki.aspx
I hope this helps!!!!!!
Maheshkumar S. Tiwari|BizTalk Developer Interview Questions and Answers
http://tech-findings.blogspot.com/

Getting Connection error while creating Substituion Rule in UWL

Hi Everybody,
Getting below error while creating Substitution Rules in UWL.
"error for the u201Cconnectionu201D to SAP_R3_Finance ".
Can be able to see all Work Items belongs to me. getting the errror while creating Substitution Rule only..
Could anybody tell me what might be the Reason what steps i need to take to resolve this issue.
Thanks,
Naveen Kumar

Hi Uds,
are you running SOA Suite on a Linux server and not on your PC and just running JDeveloper on your PC?
If so try creating the repository file specifying a directory on the Linux server.
For example to:
/tmp/sample_repository
So Choose 'File' from drop down menu
Enter /tmp/sample_repository
Click on create button
This should create the file called sample_repository in /tmp on the Linux server.
Can you tell us what your environment is?
Regards Cel

Getting error while configuring WAS 7 Fix Pack 37 with Oracle Application Development Framework (Oracle JDeveloper 11.1.1.7.0)

Hi,
I have installed Oracle Unified Directory 11.1.2.2.0 and WebSphere Application Server 7 with Fix Pack 37.
I am getting error while configuring WAS 7 Fix Pack 37 (7.0.0.37) with Oracle Application Development Framework (Oracle JDeveloper 11.1.1.7.0). While adding products to cell (Oracle Directory Services Manager for WebSphere - 11.1.2.2.0), I am getting below error:
CFGFWK-64069: The following prerequisites were found to be missing: Oracle WebCenter Composer Extension - 11.1.1.0
Also attached the screenshot of the error.
Please help.
Thanks,
Himanshu Verma

Hello,
ODSM has the following dependencies apart from ADF (both components depend also on ADF):
- UIShell (oracle.idm.uishell.war)
- Webcenter Composer (oracle.webcenter.composer.war).
Apparently the composer is missing.
Important points to check when using ODSM with WAS:
- To install and configure Oracle Fusion Middleware with IBM WebSphere, you must first install (but not configure) IBM WebSphere
- You must install the Oracle Application Development Framework as the same user who installed Oracle Unified Directory.
- appdev must be installed under the same ORACLE_HOME as OUD
Sylvain
Please mark this response as correct or helpful when appropriate to make it easier for others to find it

Error while configuring consumer provider

Hello expert,
M new SRM consultant working in my first implementation project,
i m getting an eroor while configuring consumer provider THROUGH SOAMANAGER> CONFIGURATION like dis:
SRT Framework exception: Error in WSDL access: Exception occurred in communication framework:Error in HTTP Framework:404Connection Failedhttp://gsfcsrmd.gsfcho.net:8000/sap/bc/srt/wsdl/srvc_00505693000C1ED187B493D4447ECFCA/ws
Can any one please tell why it is coming and what is the solution for it , on urgent basis.
Thanks

Hi Prachi,
1) Check for the authorization for your R/3 User ID -- Check with your basis Team ***
2) If you are trying to access in different client you need to create separate end point for your Web Service
3) Check your Service Definition is active in SICF - Tcode in that client.
Role for Authorization
SAP_BC_WEBSERVICE_ADMIN
Regards,
Ragunathan.R

Getting an Error while installing Microsoft Visual Studio 2013

Hi team
I am getting an error while installing Microsoft Visual Studio 2013
PFB error : this version of visual studio requires a computer with a never version of windows
P.S. I am having Windows 7 64 bit processor , van you please advise ASAP

Hi Kanchan Gandhi,
A similar issue is addressed here, hope it’s helpful.
http://social.msdn.microsoft.com/Forums/vstudio/en-US/127869c4-7e00-450d-b7fc-1b3cd11ebf07/this-version-of-visual-studio-requires-a-computer-with-a-newer-version-of-windows?forum=vssetup
This is system requirement of Visual Studio 2013:
http://www.visualstudio.com/products/visual-studio-2013-compatibility-vs
If there is anything I can do for you regarding this issue, feel free to post back.
Best regards,
Greta Ge
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Getting an error while creating a ERP Quotation from CRM Sales Web-UI.

Hi Experts,
I am getting an error while creating a ERP quotation from CRM Sales Web-UI. Here I am enclosing the screen shot. Please give me the solution for this.Thank you in advance.
Regards
Kishor Kumar.

Hi Kishore,
Please refer to the link below -
Entry of ERP Sales Documents in SAP CRM - Sales Quotation and Order Management - SAP Library
Also, refer to the SAP note -
1446253 - FAQ note: ERP documents in the CRM Web UI (lead-to-cash scenario)
This note will give you the related topic and the configuration required through SAP help links.
Hope this will be useful.
Thanks and Regards
DJ

Getting below error while opening query in bex 3.5x

Dear Guru's
I am getting below error while opening query in bex 3.5x
The following object were not found when accesing the server .
Press repair to correct the problem (included parts of query deleted) press cancel to undo the last action.
Regards
Karan

Hi,
1) When a query administrator with the sufficient authorization (sap_all or the * authorization for the field in the authorization object) is creating the query in query designer including the 'attributes' which are not visible with the 'normal' authorizations, the query will not list the columns in the output when it is executed by the normal user.
2) so create an authorization object for each of these attributes with * (full authorization)
Regards,
Marasa.

Getting authorization error while configuring UWL.

Similar Messages

Maybe you are looking for