Getting bad argumnet error when using UTL_MAIL.SEND_ATTACH_VARCHAR2

HI
This is my code. I dont know what I am missing. Please advice. RK
begin
UTL_MAIL.SEND_ATTACH_VARCHAR2(
sender => '[email protected]'
,recipients => '[email protected]'
,cc => null
,bcc => NULL
,subject => 'RE: Testing Attachment'
,message => 'Dear Providers: '
|| 'Let us know any changes in schedule'
,mime_type => 'text/plain; charset=us-ascii'
,priority => 1
,attachment => 'TEST'
,att_inline => TRUE
,att_mime_type => 'application_octet'
,att_filename => 'text.txt'
end;
ERROR at line 1:
ORA-29261: bad argument
ORA-06512: at "SYS.UTL_TCP", line 28
ORA-06512: at "SYS.UTL_TCP", line 257
ORA-06512: at "SYS.UTL_SMTP", line 116
ORA-06512: at "SYS.UTL_SMTP", line 139
ORA-06512: at "SYS.UTL_MAIL", line 228
ORA-06512: at "SYS.UTL_MAIL", line 382
ORA-06512: at line 3

A new file text.doc will be created but is it possible to send already created file as an attachment file
can u please mail me at [email protected]

Similar Messages

Getting the -18001 error when using TestStandLVRTS

I have developed my TestStand (v2.0) test sequences based on the LabVIEW adaptor. Everything runs well with the labVIEW development system. However, when I switch the labVIEW adaptor to the LabVIEW runtime server such as the TestStandLVRTS, I got the -18001 Error from the TSAPI with the message of "Unable to launch 'TestStandLVRTS.Application' ActiveX automation server".
I have tried all the suggested fixes described in the article "-18001 Errors When Using TestStand and LabVIEW". The error still persists.
Could you help me to solve this problem? Without this problem being solved, we will not be able to deploy our test sequences.

Hello HCL -
Below I have attached my version of the 6.1 built TestStandLVRTS folder. If you are using the build file provided in this folder when re-compiling your run time server, you should be seeing the .tlb file being auto-generated. Verify that you are using the build file that ships with TestStand and that under application settings that you have the 'Enable ActiveX server' checkbox enabled.
There are no known bugs with LabVIEW 6.1 related to problems launching the TestStandLVRTS.exe, and given the good behavior I have seen between the two products here on the test machines, I am interested in seeing first if the problem lies with the executable and then we will try and troubleshoot your particular system.
--Regards
Elaine R.
National Instruments
http://www.ni.com/ask
Attachments:
LabVIEW.zip ‏227 KB

Getting Bad Type Error when calling a method in the proxy class

Hi,
I have generated the proxy classes from wsdl.
When I am calling the methods in the proxy class from one of external class, I am getting following error.
Can anyone please help me in resolving this issue.
javax.xml.ws.soap.SOAPFaultException: org.xml.sax.SAXException: Bad types (interface javax.xml.soap.SOAPElement -> class com.intraware.snetmgr.webservice.data.SubscribeNetObjectReference) Message being parsed:
     at com.sun.xml.ws.fault.SOAP11Fault.getProtocolException(SOAP11Fault.java:197)
     at com.sun.xml.ws.fault.SOAPFaultBuilder.createException(SOAPFaultBuilder.java:122)
     at com.sun.xml.ws.client.sei.SyncMethodHandler.invoke(SyncMethodHandler.java:125)
     at com.sun.xml.ws.client.sei.SyncMethodHandler.invoke(SyncMethodHandler.java:95)
     at com.sun.xml.ws.client.sei.SEIStub.invoke(SEIStub.java:136)
     at $Proxy176.find(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at weblogic.wsee.jaxws.spi.ClientInstanceInvocationHandler.invoke(ClientInstanceInvocationHandler.java:84)
     at $Proxy173.find(Unknown Source)
     at com.xxx.fs.FNServices.findAccountWs(FNServices.java:132)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at weblogic.wsee.jaxws.WLSInstanceResolver$WLSInvoker.invoke(WLSInstanceResolver.java:92)
     at weblogic.wsee.jaxws.WLSInstanceResolver$WLSInvoker.invoke(WLSInstanceResolver.java:74)
     at com.sun.xml.ws.server.InvokerTube$2.invoke(InvokerTube.java:151)
     at com.sun.xml.ws.server.sei.EndpointMethodHandlerImpl.invoke(EndpointMethodHandlerImpl.java:268)
     at com.sun.xml.ws.server.sei.SEIInvokerTube.processRequest(SEIInvokerTube.java:100)
     at com.sun.xml.ws.api.pipe.Fiber.__doRun(Fiber.java:866)
     at com.sun.xml.ws.api.pipe.Fiber._doRun(Fiber.java:815)
     at com.sun.xml.ws.api.pipe.Fiber.doRun(Fiber.java:778)
     at com.sun.xml.ws.api.pipe.Fiber.runSync(Fiber.java:680)
     at com.sun.xml.ws.server.WSEndpointImpl$2.process(WSEndpointImpl.java:403)
     at com.sun.xml.ws.transport.http.HttpAdapter$HttpToolkit.handle(HttpAdapter.java:532)
     at com.sun.xml.ws.transport.http.HttpAdapter.handle(HttpAdapter.java:253)
     at com.sun.xml.ws.transport.http.servlet.ServletAdapter.handle(ServletAdapter.java:140)
     at weblogic.wsee.jaxws.WLSServletAdapter.handle(WLSServletAdapter.java:171)
     at weblogic.wsee.jaxws.HttpServletAdapter$AuthorizedInvoke.run(HttpServletAdapter.java:708)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
     at weblogic.wsee.util.ServerSecurityHelper.authenticatedInvoke(ServerSecurityHelper.java:103)
     at weblogic.wsee.jaxws.HttpServletAdapter$3.run(HttpServletAdapter.java:311)
     at weblogic.wsee.jaxws.HttpServletAdapter.post(HttpServletAdapter.java:336)
     at weblogic.wsee.jaxws.JAXWSServlet.doRequest(JAXWSServlet.java:95)
     at weblogic.servlet.http.AbstractAsyncServlet.service(AbstractAsyncServlet.java:99)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
     at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Thanks
Anoop

Hi Vlad,
The service has not been changed since i have generated the proxy.
I tried calling the service from soapUI and I am getting the following error now.
Request:
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:uri="uri:webservice.subscribenet.intraware.com" xmlns:uri1="uri:subscribenet.intraware.com">
<soapenv:Header>
<uri:SessionHeader>
<uri:SessionID>hjkashd9sd90809dskjkds090dsj</uri:SessionID>
</uri:SessionHeader>
</soapenv:Header>
<soapenv:Body>
<uri:Find>
<uri:SubscribeNetObjectReference>
<uri1:ID></uri1:ID>
<uri1:IntrawareID></uri1:IntrawareID>
<uri1:SharePartnerID></uri1:SharePartnerID>
</uri:SubscribeNetObjectReference>
</uri:Find>
</soapenv:Body>
</soapenv:Envelope>
Response:
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<soapenv:Header/>
<soapenv:Body>
<soapenv:Fault>
<faultcode>soapenv:Server.generalException</faultcode>
<faultstring>org.xml.sax.SAXException: WSWS3279E: Error: Unable to create JavaBean of type com.intraware.snetmgr.webservice.data.SubscribeNetObjectReference. Missing default constructor? Error was: java.lang.InstantiationException: com.intraware.snetmgr.webservice.data.SubscribeNetObjectReference. Message being parsed:</faultstring>
</soapenv:Fault>
</soapenv:Body>
</soapenv:Envelope>
Thanks
Anoop

Getting bad host error when trying to deploy simple web sample application

hi,
Can someone tell me why I'm getting this error when trying to deploy the simple web application from samples
This is what it said:
deploy_common:
[echo] Deploying ../assemble/war/webapps-simple.war.
[exec] java.net.MalformedURLException: Bad host: station_1
thanks

Hi,
Another update on this issue.
To remove the error that we were getting (java.lang.LinkageError: Class javax/xml/transform/Source violates loader constraints), we tried some searching around and found out that the way to fix it is to provide correct versions of xalan.jar, xml-apis.jar and xercesImpl.jar. We downloaded the required version from the apache site and added it to our WEB-INF/lib folder in the WAR file.
Now, we are getting this error:
XPathFactory#newInstance() failed to create an XPathFactory for the default object model: http://java.sun.com/jaxp/xpath/dom with the XPathFactoryConfigurationException: javax.xml.xpath.XPathFactoryConfigurationException: No XPathFctory implementation found for the object model: http://java.sun.com/jaxp/xpath/dom
What else we might be missing in our libs or do we need to check some other configurations?
Any help on this would be much appreciated.
Thanks,
Gaurav

Getting Run-time error when using Client ADI with Office 2010

Hi,
We are unable to import journals from Client ADI when using Office 2010.
Please let me know how to resolve this issue.
Thanks,
Pooja

Duplicate post -- Client ADI display A runtime error in Office 2010

Getting a runtime error when using a standard Form Interface

I am getting this Error analysis:
The following syntax error was found in the program /1BCDWB/SAPLSM00000212 :
"Field "VBRK-WAERK" is unknown. It is neither in one of the specified t"
"ables nor defined by a "DATA" statement. ."
The problem is, I am using a standard interface INVOICE_INTERFACE for a custom form. Why am I getting this error? Where in my form should I declare VBRK-WAERK for my program to work?

Here are some troubleshooting steps that will help you isolate and fix this problem:
Create a Z-copy of the INVOICE_INTERFACE (ex. ZIF_SD_INVOICE). Use this interface in your custom form (ex. ZFRM_SD_INVOICE).
OPTIONAL: In your custom form, deactivate all of the fields you are not using. This will minimize the amount of work in the next steps.
In your custom interface, go to the Currency/Quantity Fields section. There are 88 currency fields in the stock interface, but only 12 of them are defined in this section. At this point you have options:
If you still have fields that are active, but not listed here, you will have to enter them.
If you didn’t deactivate anything, you will have to define the remaining 76 fields here.
Use the interface at the bottom and deactivate the CMPRE_FLT field in your Adobe Form. It can be found in the PAYMENT_CARDS table contained in the HEAD_DETAIL structure of the interface. The other CURR and QUAN fields are all defined in this interface. The pictures will guide you to that field in your form.

Multivalue error when using the previous() function

I am getting a multivalue error when using the previous() function on a dimension object in the report. I thought that the previous function was supposed to look at the current report and then look at the previous record's contents. How could this possibly give me a multivalue error when the value is clearly output in the previous row? Anyone have any ideas?
By the way, this is a valuable function for the types of reports that I design. The next() function would be even more valuable.
Thanks for your help.

Hi Michael,
Could you please test the following solutions it might help you to resolve the issue.
Solution1:
Use slice and dice to reset all the tables that have #multivalue in it. The only problem with this workaround is they have to do the formatting manually.
Solution2:
Also, test the issue by changing the object to dimension if it is a measure or to measure if it is a dimension.
Regards,
Sarbhjeet Kaur

ABAP Runtime error when using RSPC

Hi Team,
I am getting ABAP runtime error when using RSPC in my system.For the same user id in other systems this transaction is working fine.Pls help me.
regds
Sha

Hello Sha Han,
What is the runtime error you are getting?
Please check the authorization also for the user in that system
Thanks
Chandran

Weblogic 9.2 error when using spring framework and taglibs.

I am getting the following error when using spring binding for a command form class.
Class ExCommandForm
private String firmCode;
public String getFirmCode ()
public void setFirmCode ()
In my jsp I have the following
<spring:bind path="exCommandForm.firmCode">
<input name="<c:out value="${status.expression}"/>" type="text" value="<c:out value="${status.value}"/>" >
</spring:bind>
Ps. exCommandForm is the commandForm declaration in my SiimpleFormController.
When I deploy the application to weblogic 9.2 I get the following error :
<Apr 26, 2007 4:34:44 PM BST> <Error> <HTTP> <BEA-101017> <[weblogic.servlet.int
ernal.WebAppServletContext@1f601c6 - appName: 'BDRui', name: 'BDRui', context-pa
th: '/BDRui'] Root cause of ServletException.
java.lang.ClassCastException: javax.servlet.jsp.jstl.core.LoopTagSupport$1Status
at jsp_servlet._web_45_inf._jsp.__tradesearch._jspService(__tradesearch.
java:1075)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run
(StubSecurityHelper.java:225)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecuri
tyHelper.java:127)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.jav
a:283)
Ps. Deploying application on Tomcat 5.23 works.
Can anyone help on this ?
cheers in advance.
More Info - Using Weblogic 9.2 on UNIX, servlet 2.4, jstl 1.1
regards
Edited by kings_citi at 04/26/2007 9:03 AM
Edited by kings_citi at 04/26/2007 10:35 AM
Edited by kings_citi at 04/26/2007 10:36 AM

The problem doesn't look like it has anything to do with wappers per se. The stack indicates that the JVM died when the persistent store tried to invoke a standard Java synchronize operation. JVM crashes need to be analyzed by a JVM expert, so I second the suggestion to solicit help from JVM experts and/or filing a case with customer support. In the mean-time, you can probably work-around the issue by either (A) ensuring you have a recent version of the JVM installed, or (B) temporarily switching to the Sun JVM.
Regards,
tom
Edited by: TomB on Sep 17, 2010 2:33 PM

Error when using filter on date column in interactive report

Hi,
I'm getting the following error when using the filter on a date column. None of the criteria in the filter list work. All give me the same error but when I use the filter on a column feature (in the search bar) and use ">" and "<" those work.
Can someone please help me????
" Settledate is in the last 2 years
ORA-30175: invalid type given for an argument ORA-02063: preceding line from MAINDATA "

I have a similar problem . I have an interactive report based on resultset stored in a collection; since all the columns of a collection are of string datatype, I convert the columns to appropriate datatypes before its returned to the user; everything works as desired except when I try to filter on a data column , I get a ORA-01858: a non-numeric character was found where a numeric was expected .
I turned on debug mode and am copying the output here , column c009 which is aliased to 'C' is the one that I am trying to apply the filter on
select
ROWID as apxws_row_pk,
"C001",
"C002",
"C003",
"C004",
"C005",
"C006",
"C007",
"C008",
"CHECKOUTTIMESTAMP",
"C010",
"C011",
"TO_NUMBER(C012)",
"TO_NUMBER(C013)",
"TO_NUMBER(C014)",
"C015",
"C016",
"C017",
"TO_NUMBER(C018)",
"C",
count(*) over () as apxws_row_cnt
from (
select * from (
Select c001,c002,c003,c004,c005,c006,c007,c008,to_date(c009,'dd-MON-yy HH24.MI') checkouttimestamp,
cast(to_date(c009,'dd-MON-yy HH24.MI') as timestamp) c,
--TO_TIMESTAMP(c009,'dd-MON-yy HH24.MI') c1 ,
trunc(to_date(c009,'dd-MON-yy HH24.MI')) checkoutdate,
c010,c011,to_number(c012),to_number(c013), to_number(c014),c015,c016,c017,to_number(c018) from apex_collections where collection_name = 'IR_BOOKSALES'
) r
where ("C" between systimestamp - ((1/24) :APXWS_EXPR_1) and systimestamp)*
) r where rownum <= to_number(:APXWS_MAX_ROW_CNT)
order by ROWID
0.04: IR binding: ":APXWS_EXPR_1"="APXWS_EXPR_1" value="1"
0.04: IR binding: ":APXWS_MAX_ROW_CNT"="APXWS_MAX_ROW_CNT" value="2000"
ORA-01858: a non-numeric character was found where a numeric was expected
I have tried to convert c009 to date, timestamp and timestamp with time zone datatypes ; they all return the same error ,but all 3 datatypes work fine with systimestamp when I run them in sqlplus. Any help would be appreciated.

Getting an error when using adobe photoshop CC, "Could not move the data because of a program error". Any idea on what this means?

Getting an error when using adobe photoshop CC, "Could not move the data because of a program error". Any idea on what this means?

Have no idea of what you were even doing in Photoshop my crystal ball is out for repairs so I can not see.

I am getting a 404 error when trying to access any search link using google, I can get to a website if I enter the url directly. I have cleared my history, emptied the cache and reset safari.

I keep getting a 404 error when trying to access any search link using google, I can get to a website by directly using the URL. I have cleared history, empited the cache and reset safari. Any suggestions.

Right. If you are using delegated privs and sudo, make sure that sudo is configured to pass on the PERL5LIB and ORACLE_HOME environment variables at least.

In aperture 3.4.5, I get unsupported file error when exporting version of photo I've edited using plugins?

In aperture 3.4.5, I get unsupported file error when exporting version of photo I've edited using plugins. I have try reinstalling aperture three times, deleting plists a few times, reinstalling plugins, restarting my MacBook Pro many times. Everything I've tried may fix the problem for a very short while and I can export a few photos before it returns. The problem happens with topaz and photomatrix pro plugins after I edited and try to export version.

I had the same problem with the Photomatix plug-in and this solved it for me. I realised it only happened with Photomatix and not other plug-ins so I checked where the plug-ins were installed. The Photomatix plug-in was installed in
~/Library/Application Support/Aperture/Plug-Ins/
where ~ is the home location for the current user account. All the other plug-ins however were installed in
Macintosh HD/Library/Application Support/Aperture/Plug-Ins/
which is the location that makes them available to all user accounts on your Mac. Moving the Photomatix plug-in to this location solved the problem for me.
Note that the Library directory under the first location is normally hidden, to get to it hold down the Option (Alt) key and select it from the Finder Go menu.

Getting Compilation error when used SET or MULTISET operator on nested tabl

Dear All,
I am getting Compilation error when used SET or MULTISET operator on nested tables inside a procedure.
This is working fine in other DB installations of 10g but does not work in another 10g DB.
it says "wrong number of parameter or datatype used in SET"
Can any one suggest what went wrong here?
Thanks in advance.

Can any one suggest what went wrong here?Only if you would post the query and Oracle versions on both databases.
Besides, this forum deals with issues in Oracle product installation. So post this query in SQL PL/SQL forum for better response.

I get the following error when trying to use the itunes store "your apple id has been disabled"

I get the following error when trying to use the itunes store "your apple id has been disabled". My account was disabled when someone else had been using it without my knowledge. I changed my apple id password and the apple id is still fine, but itunes has it disabled. I verified that the computer is authorized for this apple id. What to do now?

Welcome to the Apple Community.
Contact Apple through iTunes Store Support

Getting bad argumnet error when using UTL_MAIL.SEND_ATTACH_VARCHAR2

Similar Messages

Maybe you are looking for