Getting data from Open Hub Destination Table

Hi,
I've created InfoSpoke and as a Target I've used Table. Now I want to get to data in this table from R/3 side. Any idea where this Table might be stored and how can I get to it?
Thanks in advance!
Regards
Wojtek

hi,
is the table is in R3 side?
chk the application component name give in the infospoke definition.
if the table name is known then chk out in se11/se12/se16 in R3.
Ramesh

Similar Messages

Program or Function module to delete data from Open Hub Destination Table

Hi All,
Can anybody suggest me a Program or Function module to delete data from Open Hub Destination Table.
Thanks & Regards,
Vinay Kumar

You can simply goto t-code SE14 mention the open hub destination table and Delete data by clicking on "Activate and Adjust database" with radio button "Delete Data".
Regards,
Arminder

Erase data from open hub destination data service

Hi,
I'm getting an error trying to delete data from a cube, for which data are extracted using open hub service and loaded into a table.
The error given is the following:
Request updated in 1794 already by 1795 target DTPR_4EEX9CGGXLTU2QIPWUAIEUDZK DTP request (ZRAPPEL)
Message no. RSM077
Diagnosis
One or more DTP requests have already updated the request.
Procedure
Firstly, delete all update requests from your targets. Then you can delete the source request.
Zrappel data is the open hub destination. But it is clear where requests for this destination, to let me delete the cube data.
Thanks.

Hi,
Procedure
Firstly, delete all update requests from your targets. Then you can delete the source request.
Follow the same steps above , that means delete the requests from the Cube Zrappel.
right click on the cube -
> Delete Data
now the syatem will promt you asking
Do you want to delete the content of data target Zrapple ?
say yes for it .
hope this will solve your problem
santosh

How to delete data from Open Hub DB table when the DTP is inactive..

Hi Gurus,
I am transporting some 2LIS extractors to QA with some enhancements.
The data goes to an OHD ( third party ) pulled by a process outside SAP enabled by a BAPI.
Now , By mistake , I imported the OHDs with still some old left in the DB table of OHD ( /bic/oh<>)
It's not allowing to me do manual activation and also DTP is inactive ( cannot do a delta DTP and make no of records zero )
I want to delete the data in the OHD DB tables ..any clues....
Thanks,
Chetan

Hi Chetan,
The OHD table name is usually /BIC/OH<OHD-name> . You can find it in the OHD definition.
Go to transaction se14, give the table name and say edit.
Select Delete Data and say Activate and adjust database.
This will delete the entire contents of the OHD DB table.
Regards,
Uma Maheswari

To view the data in open hub destination

Hi all,
Can anyone help me out how to check the data in open hub destination file.
These are the details:
Destination: File
Type of file : Logical file
Application Server file name : XXXXXXX
If it was file name, i know it has to be checked in AL11 with directory name and file name.
Here its a logical file name. Which is the directory corresponding to this?
Thanks,
tinkugeo

Hi,
Question: "Are all the logical files are saved in the home directory DIR_HOME?
Please correct me if I am wrong"
Ans: When you create an Open hub destination using Physical file, the file will get created in DIR_HOME directory (by default) in AL11
And for locating the physical path in AL11. Go through the below link. it gives ans to all your ques
http://bx.businessweek.com/sap/view?url=http%3A%2F%2Fweblogs.sdn.sap.com%2Fpub%2Fwlg%2F17370
Edited by: kumkum basu on May 20, 2010 8:20 AM

Open Hub Destination Table Vs File

Hello Experts,
We have a requirement to send data from BW to 3rd party system every day. In the Open hub destination we have two options for the target.
1. Table
2. File
ETL tool like Informatica will extract the data from table or file into 3rd party sytem.
Which way is the best in performance and maintenance?
Thanks in advance
Sree

Hi,
If you follow the delta mechanism then table is good. You can also go for File not a problem. See the both eamples in the following articles.
If you use Fiels then go for Application Server option, i.e. AL11 becasue no one can change teh files in this location, you can restrict the authorizations.
Open Hub Destination: Part 1
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/m-o/open%20hub%20destination%3a%20part%201.pdf
Open Hub Destination: Part 2
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/m-o/open%20hub%20destination%3a%20part%202.pdf
Thanks
Reddy

Help required for Creation of process chain for Open hub destination(table)

Hi Experts,
I am working on creating process chain for the open hub destination which is targeting data transfer into Table. Which is then push to SAP PI.
2.) Steps to create a process chain for OHD????? Not knowing and even after that
3.) What are the steps for Pushing it to PI (I mean we have generated client proxy also) But need to know ABAP related to trigger process chain
please need your expertise and knowledge. Well atleast with the point 2 I need BI experts help...
Regards,
[Gaurav Patwari|http://gauravpatwari.wordpress.com]

Hi Gaurav,
Creating Process chain for OHD.
1. Go to RSPC-> Create a astart variant.
2. Click on process typesin the menu. Fourth from the left. Under this go to LOAD PROCESSES AND POST PROCESSING option.
3. The fifth option is "DATA EXPORT INTO EXTERNAL SYSTEMS". Click on that.
4. Click on F4 and choose your infospoke name.
5. Press the RIGHT button.(if it asks for variant, create a new variant in the same small window besideswritting bar).
6. Join the START process and the 2nd process via dragging.
7. Now add your required other processes.
The general process chain processes are :
1. Start.
2. Delete Indexes (if data loaded to cube).
3. Load process.
4. Delete duplicate request (if it is a full load in cube).
5. Create Indexes.
Hope it helps.
Preet

Open Hub Destination table structure update

Hi,
     I created a open Hub detsination and activation created the table and populated the data in the table and have a view over the table.
     I need to add few more fields in the open hub and when I did that and activated again , it is supposed to change the table structure adding the new fields that were added in the open hub.
   The activation was successful but the table structure still stays the same.I didn't see the new fields in the generated table.
   Anyone having similar issues.
Thanks in advance

We deleted all the related objects from Staging and production and re transported them from Development as though they are being sent for the first time and that works.Tough this approach is not good we need to use it as I didn't find any other solution

Question,Get data from ALV to internal table

Hi, friends
I currently need to get the data displayed on ALV.
But the original internal table is local.
It means it has already been deleted.
Do you know which method I shoud use?
After that, I will move the records to other internal
table.
3Q
Minghan

Hi,
are you using ALV list/GRID FM,
Check this..,
1. why can't you declare the internal table as Global.
2. you can call the FM
REUSE_ALV_LIST_LAYOUT_INFO_GET
here you get the table data using the table parameter <b>ET_OUTTAB</b>
try this...
where you will try?( when ever you want , please let me know where exactly you need this)
Regards
vijay

Data Extraction in Open Hub Destination using Process Chain

Hi
I want to extract data in Open Hub Destination (database table)from Data Store Object(ODS) through Process Chain.
When i tried to create process chain, i found only one option under Process types - Data export into External System. Here it asks for Infospoke instead of Open Hub Destination.

Michael is correct and below is the rationale...
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/43/58e1cdbed430d9e10000000a11466f/content.htm">http://help.sap.com/saphelp_nw2004s/helpdata/en/43/58e1cdbed430d9e10000000a11466f/content.htm</a>
<b>Integration</b>
You can use the data transfer process to update data to the open hub destination. The data is transformed in this process. Not all rules types are available in the transformation for an open hub destination: Formulas, reading master data, time conversion, currency translation and unit conversion are not available.
Hope it Helps
Chetan
@CP..

Open hub destination issue

Hi,
In our project we have Client Instance (eg: BWPD) and Application server (eg: BWPRD) defined for load balancing.
We have created open hub and assigned destination server BWPD.
When i execute the DTP manually in BWPD, it runs succesfully.
However, the same DTP when placed in the process chain fails with error message :
No Such File or Directory
Could not open file D:\usr\sap\BWPD\A01\work\Material on application server
Error while updating to target ZXXXX.
Options Tried:
Schedule process chain in the background server BWPD (same server which has been mentioned in Open hub dest) still DTP failed.
Tried with Application server it failed.
Tried with HOST as option it failed.
couldn't make out what is going wrong. Any thoughts ?
Regards.

Hi there,
found that doc quite useful.
Maybe could shed some light to your issue.
[Creating Open Hub Destination using a Logical file to extract the data|Creating Open Hub Destination using a Logical file to extract the data]
Also, what OS do you have?
is the Syntax Group accordingly created ?

How to export data from ODS through Open hub destination ?

Hello Expert,
I ahve some data in ODS.I want to export that data to some thirdt party application through Open Hub destination .How will I do that ??
Eary reply is appreciated .

HD IS :
         1.DATASOURCE
         2.INFOSOURCE
         3.DATASTORE OBJECT
         4.INFOCUBE
         5.INFOOBJECT
1.Assume that info cube existing with data
2.Create openhuB services
    GO FOR OHD---->select Any info area ->CONTEXTMENU>Create OHD
     Give the 'OBJECT NAME'----Continue
In OHD Destination type Depends upon 3 types
   1.DB-TABLE
   2.FILE
   3.THIRD PARTY TOOL
3.Go for the Defination Tab give the File name
4.Create Transfermations
5.Create DTP
OPEN HUB SERVICES WITH -
INFOSOURCE:OHD---DB TABLE SPECIFY:/BIC/OH
1.Assume that info cube existing with data
2.Create openhuB services
    GO FOR OHD---->select Any info area ->CONTEXTMENU>Create OHD
    Give the 'OBJECT NAME'----Continue
3.Select Dbfile----->Continue
   Select file location where you want to store file .
    O.Semantic key
4.Create Transfermations
5.Create DTP
Regards ,
Praveenyagnamurthy.

Use of Open Hub Destination to load data into BPC

Hi Gurus,
I want to load the data from SAP BI to BPC (NW version), using Open Hub Destination. I want to know few things about this.
1) What method should I use? Should I use Destination as Flat Files or Database tables? If Database tables, how can I use this data in the tables in BPC?
2) If I go for Flat Files, which is saved in the application server of BI, how can I import those files to BPC and use it using Data Manager?
3) Also, in case of Flat Files, there are two files which are created. One is the control file and other one is the data file. How can I use both of them? Or can I just use data file without header?
Your replies will be much appreciated.
Thanks,
Abhishek

Hi Anjali,
I can use the standard data manager package from BI to BPC, if the CSV file is available in the BPC Server or in case if I am directly extracting from BW object, InfoObject or InfoCube.
But, since I will be using Open Hub, the output of this can be in a Database Table or a CSV file, preferably in SAP Application Server. In such cases, how can I use the Database table or CSV file in the standard Data Manager Package?
Thanks for your reply.
Abhishek

Open Hub Destination - From BI7 to R/3 error

Hi All ,
I am in the process of transferring infocube data from BI 7.0 to R/3.
I created an open hub destination with third party . Once I execute the DTP , i get an
error message
CREATE DATA : The specified type /BIC/OH**** id no valid data type.
The RFC connection between both the systems is in place .
Please guide me where i am going wrong.
Any help is highly appreciated.
Thanks & Regards,
Anjna Goyal

Hi,
Set the correct parameters in case of other Systesm i.e. external system, see the below articles on Open Hub Destination
Open Hub Destination: Part 1
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/m-o/open%20hub%20destination%3a%20part%201.pdf
Open Hub Destination: Part 2
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/m-o/open%20hub%20destination%3a%20part%202.pdf
Thanks
Reddy

Open Hub Destinations - Write directly to a table on 3rd party DB.

Hi All,
Is there way to create a table in the Non SAP system ( like 3rd party DB ) using Open Hub Destinations?
If yes what are the steps.
Thanks,
Hima

There is a 3rd party extractor to load data from BI into SQL Server (and vice versa) using Open Hub:
[ http://msdn.microsoft.com/en-us/library/dd299430.aspx|http://msdn.microsoft.com/en-us/library/dd299430.aspx]
Summary: This white paper demonstrates the use of the Microsoft Connector 1.0 for SAP BI in Microsoft SQL Server 2008 Integration Services packages. It shows how to load data into SAP BI by using the SAP BI destination, how to extract data from SAP BI by using the SAP BI source, and how to prepare extracted data for analysis in SQL Server Analysis Services.

Getting data from Open Hub Destination Table

Similar Messages

Maybe you are looking for