How to delete data from Open Hub DB table when the DTP is inactive..

Hi Gurus,
I am transporting some 2LIS extractors to QA with some enhancements.
The data goes to an OHD ( third party ) pulled by a process outside SAP enabled by a BAPI.
Now , By mistake , I imported the OHDs with still some old left in the DB table of OHD ( /bic/oh<>)
It's not allowing to me do manual activation and also DTP is inactive ( cannot do a delta DTP and make no of records zero )
I want to delete the data in the OHD DB tables ..any clues....
Thanks,
Chetan

Hi Chetan,
The OHD table name is usually /BIC/OH<OHD-name> . You can find it in the OHD definition.
Go to transaction se14, give the table name and say edit.
Select Delete Data and say Activate and adjust database.
This will delete the entire contents of the OHD DB table.
Regards,
Uma Maheswari

Similar Messages

Program or Function module to delete data from Open Hub Destination Table

Hi All,
Can anybody suggest me a Program or Function module to delete data from Open Hub Destination Table.
Thanks & Regards,
Vinay Kumar

You can simply goto t-code SE14 mention the open hub destination table and Delete data by clicking on "Activate and Adjust database" with radio button "Delete Data".
Regards,
Arminder

Getting data from Open Hub Destination Table

Hi,
I've created InfoSpoke and as a Target I've used Table. Now I want to get to data in this table from R/3 side. Any idea where this Table might be stored and how can I get to it?
Thanks in advance!
Regards
Wojtek

hi,
is the table is in R3 side?
chk the application component name give in the infospoke definition.
if the table name is known then chk out in se11/se12/se16 in R3.
Ramesh

Open Hub: How-to doc "How to Extract data with Open Hub to a Logical File"

Hi all,
We are using open hub to download transaction files from infocubes to application server, and would like to have filename which is dynamic based period and year, i.e. period and year of the transaction data to be downloaded.
I understand we could use logical file for this purpose. However we are not sure how to have the period and year to be dynamically derived in filename.
I have read in sdn a number of posted messages on a similar topic and many have suggested a 'How-to' paper titled "How to Extract data with Open Hub to a Logical Filename". However i could not seem to be able to get document from the link given.
Just wonder if anyone has the correct or latest link to the document, or would appreciate if you could share the document with all in sdn if you have a copy.
Many thanks and best regards,
Victoria

Hi,
After creating open hub press F1 in Application server file name text box from the help window there u Click on Maintain 'Client independent file names and file paths' then u will be taken to the Implementation guide screen > click on Cross client maintanance of file name > create a logical file path by clicking on new entiries > after creating logical file path now go to Logical file name definition there give your Logical file , name , physical file (ur file name followed by month or year what ever is applicable (press f1 for more info)) , data format (ASC) , application area (BW) and logical path (choose from F4 selection which u have created first), now goto Assignment of physical path to logical path > give syntax group >physical path is the path u gave at logical file name definition.
however we have created a logical path file name to identify the file by sys date but ur requirement seems to be of dynamic date of tranaction data...may u can achieve this by creating a variable. U can see the help from F1 that would be of much help to u. All the above steps i have explained will help u create a dynamic logical file.
hope this helps u to some extent.
Regards

How to delete data from single field in a database table?

Hi guys,
Plz suggest me How to delete data from single field in a database table?
thnks,
pavan

hi
in addition to abv details..chk this:
http://help.sap.com/saphelp_nw2004s/helpdata/en/fc/eb3aef358411d1829f0000e829fbfe/content.htm
http://dev.mysql.com/doc/maxdb/en/34/ee7fbd293911d3a97d00a0c9449261/content.htm
regards,
madhu

How to Pull data from sap r/3 tables to oracle tables

how to fetch data from sap r/3 tables & data pulled to oracle table .
GIVE THE APPROPRITE ANSWER FOR THIS.
THANKS IN ADVANCE.
If it is useful for me , i am giving point.
regards ,
Navita
Edited by: NAVITA YADAV on Mar 7, 2008 2:07 PM
Edited by: NAVITA YADAV on Mar 7, 2008 2:08 PM

You need to perform some native SQL to fetch data. Before doing this connection must be exists b/w your R/3 and Oracle server.
Basis team will help you to have connection.
Check the connection name in the table DBCON.
Check the below code to handle native SQL.
SELECT SINGLE DBMS
           FROM DBCON
           INTO DBTYPE
           WHERE CON_NAME = DBS.
IF DBTYPE = 'ORA'.
    TRY.
      EXEC SQL.
        CONNECT TO :dbs
      ENDEXEC.
ERROR Handling for Native SQL *************
      IF SY-SUBRC <> 0.
        MESSAGE `Docusphere connection failed.` TYPE 'I'.
        EXIT.
      ENDIF.
EXEC SQL PERFORMING loop_output.
    OPEN C1 FOR
    SELECT UK1, UK7, uk6, uk9, uk22, uk23, uk25    "field names of Oracle table
    FROM IIS_DOCS_AP10D
    WHERE ( UK2 = 'ZFIINVOICE' OR UK2 = 'ZFIPAYREQ' )    AND
    UK19 = 'E'                                           AND
    UK20 IS NULL
ENDEXEC.
      DO.
        CLEAR W_OUTPUT.
        EXEC SQL.
          FETCH NEXT C1 into :wa1-arc_doc_id, :wa1-bukrs, :wa1-belnr, :wa1-gjahr, :wa1-wi_id, :wa1-ARCH_METHOD, :wa1-barcd.
        ENDEXEC.
enddo.
Reward points if helpful.................

How to insert data from JTable to mysql Table....

hello everybody
i need help about how to insert data from JTable to mysql table... i know about how to create Table model...facing problem about how to insert data from JTable to mysql table....any helping link or code ... ill be thankfulll....for giving me solution...

table1.getValueAt(table1.getSelectedRow(),0)you are getting the value of a selected row... or if you want you can just use a loop..
for(.....){
table1.getValueAt(x,y);
}I think you know INSERT STATEMENT.. here on it just string concat
sample e.g. (This not insert)
"delete from accrule " +
"where ruleid= " + tblRA.getValueAt(tblRA.getSelectedRow(),0)+
" and accountname='"+tblRA.getValueAt(tblRA.getSelectedRow(),1)+"'"

JDBC-XI-FILE scenario. How to extract data from more than one table in JDBC

Hi,
I was asked a question like in JDBC-XI-FILE scenario........ How to extract data from more than one tables (i.e from JDBC system) ?? What is the logic to do the same ??
I am not sure whether this is a valid question..........but any help in this regards is highly appreciated.
Regards
Kumar

HI,
Yes it can be possible ,please see the following links
JDBC Receiver with Oracle Stored Procedures
configuring jdbc adapter with multiple tables
RFC -> XI -> JDBC Scenario Updating Multiple Tables
/people/alessandro.berta/blog/2005/10/04/save-time-with-generalized-jdbc-datatypes
JDBC Adapter multiple Selects
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=jdbc%20with%20multiple%20tables&cat=sdn_all
Regards
Chilla..

Erase data from open hub destination data service

Hi,
I'm getting an error trying to delete data from a cube, for which data are extracted using open hub service and loaded into a table.
The error given is the following:
Request updated in 1794 already by 1795 target DTPR_4EEX9CGGXLTU2QIPWUAIEUDZK DTP request (ZRAPPEL)
Message no. RSM077
Diagnosis
One or more DTP requests have already updated the request.
Procedure
Firstly, delete all update requests from your targets. Then you can delete the source request.
Zrappel data is the open hub destination. But it is clear where requests for this destination, to let me delete the cube data.
Thanks.

Hi,
Procedure
Firstly, delete all update requests from your targets. Then you can delete the source request.
Follow the same steps above , that means delete the requests from the Cube Zrappel.
right click on the cube -
> Delete Data
now the syatem will promt you asking
Do you want to delete the content of data target Zrapple ?
say yes for it .
hope this will solve your problem
santosh

How to transfer data from a dynamic internal table

Hi All
I want to transfer data from a dynamic internal table<dyn_table>
to a non dynamic internal table itab which should have the same structure as <dyn_table>.
How can this be done?
Regards,
Harshit Rungta

As stated earlier this can be done only through field symbols...
You cannot create an non dynamic internal table with ANY structure...using DATA statement
If the strucutre is defined well and good...you can create an non-dynamic internal table...
If you do not know the structure then the internal table has to be dynamic...and to be generated using field symbols
DATA: lv_ref TYPE REF TO data.
FIELD-SYMBOLS: <fs_dyn_table> TYPE STANDARD TABLE.
* You create a dynamic internal table...
CREATE DATA lv_ref LIKE (your_dynamic_internal_table).
ASSIGN lv_ref->* TO <fs_dyn_table>.
Now...do the transfer.
<fs_dyn_table> = "your_dynamic_internal_Table
Hope it helps!

How to read data from idoc to internal table?

Hi
How to get data from idoc segments to internal table?

Hi
Check this ex
The following coding sample, shows how you may read a MATMAS IDoc and extract the data for the MARA and MARC segments to some internal variables and tables.
DATA: xmara LIKE mara.
DATA: tmarc LIKE marc
            OCCURS 0
            WITH HEADER LINE.
LOOP AT edidd.
   CASE edidd-segnam.
     WHEN 'E1MARAM'.
          MOVE edidd-sdata TO xmara.
     WHEN 'E1MARCM'.
       MOVE edidd-sdata TO tmarc.
          APPEND tmarc.
   ENDCASE.
ENDLOOP.
now do something with xmara and tmarc.
hope this helps you...
Reward points if useful..
Regards
Sreenivas

How to pass data from list to internal table

Sir,
Please tell me how to pass data from list display to internal table. Some fields in the list display are input fields .These are added at run time and these added values should be stored in the internal table

Follow this code sample:
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
    I_CALLBACK_PROGRAM                = W_REPID
    I_CALLBACK_PF_STATUS_SET          = 'PF_STATUS'
    I_CALLBACK_USER_COMMAND           = 'USER_COMMAND'
FORM USER_COMMAND USING P_UCOMM TYPE SY-UCOMM
                        P_SELFLD TYPE SLIS_SELFIELD.
case p_ucomm.
when '<Some user Action>'.
Data ref1 type ref to cl_gui_alv_grid.
CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
IMPORTING
E_GRID = ref1.
call method ref1->check_changed_data
* Your internal table will have the data
endcase.
ENDFORM.
Regards,
Ravi

How to select data from a PL/SQL table

Hi,
I am selecting data from database after doing some screening i want to store it in a PL/SQL table (temporary area) and pass it to oracle reports.
Is there any way to select the data from a PL/SQL table as a cursor. Or is there any other way of holding the temporary data and then pass it back as a cursor.
Regards
Kamal

A PL/SQL "table" is anything but a table. Whoever came up with this term in PL/SQL to describe what is known as dynamic arrays (the correct programming terminology that existed since the 70's if not earlier and what is used in all other programming languages I'm familiar with)... well, several descriptions come to mind and none of them are complimentary.
You cannot "select" from a PL/SQL dynamic array as it is not a table within the Oracle context of tables.
Thus you need to convert (cast) a PL/SQL dynamic array into a temporary Oracle data set/table in order to select from it. This is in general a Bad Idea (tm). Oracle tables and SQL and concurrency controls and all that are especially designed for processing data. PL/SQL arrays is a very simplistic data structure with very limited usage. Why would you want to use that in SQL via a SELECT statement when you can use Oracle tables (or proper temp tables) instead? Besides that, it is also slow to cast a dynamic PL/SQL array into an Oracle SQL data set structure (context switching, copying of memory, etc).
The proper way to use PL/SQL to generate data sets for use via the SQL engine is pipelined table functions.
This is not to say that you should never use PL/SQL arrays and casting in SQL.. simply that you need to make sure that this is the correct and scalable way to do it. And that will also always be an exception to the rule when you do.

How to delete data from hard disk before returning Macbook Air to the store

I need to return a recently purchased Macbook Air to the store. How do I delete all data from the hard drive before I return the notebook?

Ahh, you want to WIPE the entire drive,.....command R on startup, disk utilities....select MacIntosh HD,......ERASE it format it in MAC OSX extended journaled.
after than, you can do a wifi or ethernet reinstall to factory OUT OF BOX new condition. Usually takes 1.5 to 2 hours if you have a descent fast www connection.

How to delete data from the table PA0007

Hi Friends,
Thank you for your kindly help.
When I upload data to infotype 0007(planed working time),
there is something wrong with the infotype 2011. So I want
to delete the data of infotype 0007. While using the program RPUREOPN to delete the data, the system will say:0007 cannot be deleted because of time constraint 1/A.
Now how can I delete the data from table PA0007?
Pls help me urgently.
Best wishes
Anne

Hi Sikindar,
Thank you for your help.
There is another question. There are five clients (Client 300,310,320,330,350) in my HR DEV system. I just want to delete the data of infotype 0007 in client 350. When I change the the time constraint and delete the data in client 350, the data of infotype 0007 in other clients will be safe or not?
Thank you again for your help!
Best wishes
Anne

How to delete data from Open Hub DB table when the DTP is inactive..

Similar Messages

Maybe you are looking for