Getting Dependents (IT 0021) of a Benefit Plan

Hi All,
I'm attempting to write a report that will display the name and type of a dependent of a particular EE's benefit plan.  I know the link is between DTY01/DID01 - DTY20/DID20 in the benefits table (EX. IT 0167) and The Subtype and OBJPS of IT 0021 (Family).  However, I can't figure out quite how to display the family information for the benefit plan.  I've done a flat data load in two ODS's .. one for IT0021 and one for IT0167.  I would think that an InfoSet would help with this solution, however, any advice would be helpful.  The issue is that an EE can have multiple dependents.  This is why there are 20 DTY and DID fields.
I'm unable to use the standard BI cube for benefits.  This is why I've build custom data targets.
Thanks in advance,
Meezy

Hi Meezy,
This solution is not efficient as you have already thought. What I would suggest for the time being is that link the 2 ods only based on the employees. That way, you will have all the records visible for reporting. Eg: if you have 3 records in 167 and 2 records in 21 for an employee, you can see all the 5 records with all the 20 fields in each record. In the query, you can restrict the records by the required subtype. Now, you can compare objps with each of the 20 fields in the query using calculated kfs. Again, it is not a performance optimized solution.
Thanks and Regards
Subray Hegde

Similar Messages

  • Benefit Plan Setup

    Hello Experts..
    We are setting up the core tables for Benefit and we approached client and received below requirements on all the benefit plans that they are going to provide. Looking at below list, our client seems really generous:
    1. Health -
    a) Medical/Visoin
    b) Dental
    c) Domestic partner medical/vision
    2. Life -
    a) Sup life 1x-5x
    b) Life AD/D
    c) Dependent life (Children)
    d) Spousal Life
    3. Disability -
    a) LTD
    4. Leave -
    a) Sick
    b) Vacation
    c) Personal
    d) Company Car
    5. Retirement -
    a) Retirement
    6. Pension
    a). Pension
    7. Vacation buy/sell
    a) Buy
    b) Sell
    Here is what we have done so far :-
    For 1a and 1c we have added customer plan types with code 1Z and 1Y respectively since the existing ones didn't look relevant. This plan means, vision coverage will come under medical coverage. but dental will be standalone.
    For 2a, we have added 5 plans as per the requirement 1x, 2x, 3x, 4x ,5x
    2c and 2d will be awarded only when employee takes supplemental life.
    for 5a, created a new plan type with more relevant meaning with code 5Y.
    Finally, Our questions are:
    1 - Have we set up these plans correctly? if you think there should be changes in this please share you thoughts
    2 - Can we combine 2c and 2d instead of keeping them separate because if employee takes any supp life then dependents can be covered, and dependents means if employee is married then spouse + 2 children but if single then both parents.
    3 - Why do we have the option "Self-Service Plan Description" only for 1x, 3x, 5x and 7x. does it means employee will have opportunity to elect in these plans only?
    What about supp life where there are 5 type of plans and if employee doesn't have above option then how will he/she decide which plan can he/she elect?
    4 - Why is it required to give vendor name for Leave and vacation buy/sell plan types? is it applicable for these two plan types? what does vendor have to do with Leaves?
    We are in the starting phase of setting up benefits so we really need your help continuously so please respond back with your valuable thoughts

    Yes, you are right create for each grouping create a separate age groupings. And define "Employee contribution variant"  check mark age  then assign the age groupings you create to Employee contribution rule.. Finally assign these variant to the savings plan..
    I hope this helps...let me know if you have any further question. Just try it out you will get it...

  • Benefit Plan Enrollment requiring EOI, existing Benefit pan is delimited

    Hi Everyone,
    Here is the situation...
    When an employee changes his/her benefit plan and enrolls into a
    benefit plan requiring EOI, the existing benefit plan record is
    delimited, it puts an end date to the existing plan. We would like to keep the existing one active until the pending one get activated when we receive the EOI.
    Do you have any ideas?
    Thank you!

    @Andre
      Here is ONE way I have seen it done (a more elegant solution might be possible via User-exit/BAdI/workflow. Several moving parts here so bear with me....
    (1) Employee goes online and selects coverage that requires EOI. Say that the max without EOI is $250,000 and the max with EOI is $500,000.
    (2) On the screen that shows that coverage, verbiage is added to the effect of "The selection you made requires EOI. Your requested coverage will not be valid until EOI is provided and approved. However, during this transition, you will be covered up to the maximum of $250,00 until time that EOI has been approved."
    (3) Nightly, a batch process runs that looks for newly created records with the EOI flag empty (since the employee can not set this themselves, the record will show that it is still needed). At that time, the batch program performs the following...
    (4) In the background, the first is for the $500,000 coverage amount but is flagged "locked/inactive". A second record is created for the same dates but for the $250,000 coverage amount....therefore, the employee is in fact covered to the max w/o EOI.
    (5) Since there can now be a lag in time....Upon receipt of EOI and approval, an HR admin goes in and deletes the second "hold" record and remove the flag/lock on the original record.
    Make sense?

  • Benefit plan maximum coverage amount problem

    Hello.
    I guess I have a very simple problem, but I doesnu2019t get it running.
    I have an Insurance benefit plan.
    It only have one coverage rule with the following data:
    Salary Factor: 0.6000
    Rounding Rule: rounded up
    Rounding div:  1000.00
    Maximum amount: 90,000.00
    So if someone have a Benefit Salary of 225,000.00, it shows a basic Coverage amount of 135,000.00 in Infotype 0168.
    But I want a maximum Coverage amount of 90,000.00.
    Why it ignored the maximum limit?
    Any help would be very nice.
    Regards.

    Please close your thread if you solved your problem.

  • HSA Benefit Plan: Employee Contr and Employer Contr wagetype not showing up

    Hi Experts,
    For a couple of our empls, the Employee Contr and the Employer Contr wagetypes for HSA Benefit Plans are not showing up in the payroll log. For other empls, all is fine.
    Here's what the payroll log lin running regular payroll ooks like in processing of function P0169:
    =========================================================
    BAdI "Evaluate Ee Contrib" implemented
    Calculated contributions:
    Employee contribution pre-tax: 35.00 USD Weekly
    No rollover of pre-tax to post-tax contributions
    Post-tax contributions start only after pre-tax limit is reached
    BAdI "Check Contribution Limits" implemented
    BAdI "Evaluate Er Contrib" implemented
    Final result contributions:
    Employee contribution pre-tax: 35.00 USD
    Employer contribution: 19.24 USD
    BAdI "Proration" implemented
    Processing proration for 12/27/2010 - 12/27/2010 results in:
    ========================================================
    Here no wagetype is showing up though they are getting calculated above.
    Regards,
    Somdeb.

    First please respond to my questions.If there is wagetype is  coming from the previous periods or other IT where enter for any correction ....there is a possiblity it is nullified after the BADI.
    Second..The wagetype is getting dropped in the proration logic...check the dates of employee payperiod with IT169 and let me know the dates.
    Third...what is parameter used for P0169 in your UBE2 schema is CHK or BEG or END..?
    Edited by: Amosha on Jan 6, 2011 5:11 PM

  • HSA Benefit Plan: Employee Contr and Employer Contr deductions not happenin

    Hi Experts,
    For a couple of our empls, the Employee Contr and the Employer Contr wagetypes for HSA Benefit Plans are not showing up in the payroll log. For other empls, all is fine.
    Here's what the payroll log in running regular payroll looks like in processing of function P0169 for this HSA benefit plan:
    =========================================================
    BAdI "Evaluate Ee Contrib" implemented
    Calculated contributions:
    Employee contribution pre-tax: 35.00 USD Weekly
    No rollover of pre-tax to post-tax contributions
    Post-tax contributions start only after pre-tax limit is reached
    BAdI "Check Contribution Limits" implemented
    BAdI "Evaluate Er Contrib" implemented
    Final result contributions:
    Employee contribution pre-tax: 35.00 USD
    Employer contribution: 19.24 USD
    BAdI "Proration" implemented
    Processing proration for 12/27/2010 - 12/27/2010 results in:
    ========================================================
    Here no wagetype is showing up though they are getting calculated above.
    Regards,
    Somdeb.

    The issue has been resolved.
    The Savings Plan HSAF had a co-requisite Health Plan HDP and we had to add this co-requisite plan for the empl.
    Also the P0169 function had to be changed from BEG to CHK in the payroll schema which did the trick.
    Regards,
    Somdeb.

  • Reg: benefit plan-insurance info type

    hi ,
    when  i am trying with inbound  certain employee data  into sap, some insurance plans gets updated smoothly but some plans not uploaded. when i am working on this error its shows that it purely depend on benefit  salary on insurance coverage tab.
    my question  is  how they determine the benefit salary field of the employee.(certain plans its determined automatically for some plans not)
    regards
    muthuraman.d
    Edited by: muthuraman d on Apr 2, 2010 4:24 PM
    Edited by: muthuraman d on Apr 2, 2010 5:23 PM

    Hi Muthu,
    To answer your question.....how is Benefit Salary (BSAL) determined........
    A Benefit salary wage type BSAL is needed to calculate the annual salary of the employee for calculations required for Benefit Plans. For Coverage levels and salary groups for cost, contribution, credit and other Benefit calculations, BSAL is required.
    This BSAL is estimated by the configuration entries in ITs 0008, 0014, 0015 for the WTs specified in table T539J, for the module (e.g. ANSAL) which has to be assigned to the Benefit salary wage type BSAL in table T511.
    And to know as of which date the records are processed, check this definition:
    [http://help.sap.com/saphelp_46c/helpdata/en/35/28eb87e8aa5570e10000009b38f983/content.htm]
    Hope this helps !!!!
    Kumarpal Jain.

  • ESS Benefit Plan Decimals Issue

    Hello ,
    We are on EP7.0 ECC6.0 and have an Open Enrollment Application which lets employees enroll for various Benefit Plans ....and when they try to Edit the Plan the cost shows up as 9.51 if the value is 9.51 in R/3.The Cost shows up as 9.5 even if the value in R/3 is 9.50....so somewhere the trailing zero is getting discarded ...Please help.
    Any help would be highly appreciated.
    Message was edited by:
            Shikhil Arora

    Any ideas anybody....

  • The Benefit Plan in the latest OPA release does not seem to work with Siebe

    I've installed the latest version of OPA (10.0.1.14.0) and it came with a Benefit Plan example. The Income Thresholds.xls and Interpretative.dox are missing so it can not be compiled.
    Also the OPA Connector Developer Help has a section for this tutorial which explains how to use the Benefit Plan example in Siebel. However I cannot see how by clicking the 'Eligibility' button on HLS Case Form Applet, it is going to call OPA to run the Benefit rules.
    Can someone please explain how to get this example working with OPA?
    I understand that from Siebel you need to call the 'Policy Automation Assess Workflow' to pass in the relevant data to OPA, but I don't understand how this workflow is being called in the Benefit Plan example? The 'Eligibility' button called a method 'CreateBenefitPlan' which is a user property on 'HLS Case' BC and all it does is a RefreshRecord. So I can't see exactly what is being done behind.

    It should be mad clearer in the help but this example is reliant on the Siebel 8.2 public sector version.

  • Does anyone know if Apple are planning on releasing a new version of the iPad in 2013? I want to buy one, but would rather wait to get the latest one if they are planning on a release of a newer version later this year.

    BEFORE JUST REJECTING MY QUERY, AS A POTENTIALLY NEW CUSTOMER I WOULD APPRECIATE SOME FORM OF AN ANSWER!!
    I want to buy an iPad (my first one), but would rather wait a couple of months to get the latest one if they are planning on a release of a newer version later this year. I certainly cannot afford to buy one now and then update when a newer model comes out, especially if it's released only a couple of months from now.

    The latest one came out just 4 months ago. Doubt one is coming out soon.
    There are always going to be people who are one day out of their return period when a new device comes out, and that's just that. No one can predict. And we are all just users here who would have no idea. But I would get an iPad now given the last one came out four months ago.

  • Getting Unknown Source Error While Deploying the Planning Application

    Hi,
    Getting following error while trying to Deploy Planning Application from BPMA
    Started Time : Tuesday, January 08, 2008 5:43:40 PM
    Submitted Time : Tuesday, January 08, 2008 5:43:40 PM
    Last Updated Time : Tuesday, January 08, 2008 5:44:32 PM
    User Name : hpadmin
    Process Name :
    Thread : 0
    Server : DimServer
    Detail : App Creation failed with Exceptionjava.lang.RuntimeException: Exception occurred while creating the application. Check log for details     at com.hyperion.planning.appdeploy.HspAppDefinition.deployAppFromXML(Unknown Source)     at com.hyperion.planning.appdeploy.HspAppDefinition.access$000(Unknown Source)     at com.hyperion.planning.appdeploy.HspAppDefinition$1.run(Unknown Source)

    Hi,
    I am getting the same error:-
    Started Time : Tuesday, February 26, 2008 4:14:31 PM
    Submitted Time : Tuesday, February 26, 2008 4:14:31 PM
    Last Updated Time : Tuesday, February 26, 2008 4:15:39 PM
    User Name : hpadmin
    Process Name :
    Thread : 0
    Server : DimServer
    Detail : App Creation failed with Exceptionjava.lang.RuntimeException: Exception occurred while creating the application. Check log for details     at com.hyperion.planning.appdeploy.HspAppDefinition.deployAppFromXML(Unknown Source)     at com.hyperion.planning.appdeploy.HspAppDefinition.access$000(Unknown Source)     at com.hyperion.planning.appdeploy.HspAppDefinition$1.run(Unknown Source)
    1---Have created new user for new App as well datasource
    2-Bounced the EPMA as well planning server but no avail.
    how I can I get detail log ? or if is it possible to tell me which directory to look into
    thanks in advance
    Sanjay

  • Mail to achieve a contact for support to get my Serial Number caCare Apple Protection Plan?

    Mail to achieve a contact for support to get my Serial Number caCare Apple Protection Plan?

    Call the appropriate phone number on this page.
    Best of luck.

  • How can I get the query name/aggregationslevel in my planning function?

    Hi,
    is it possiable to get the query name/aggregationslevel in a planning fuction?
    thanks for your idea.
    hongwei

    Hi,
    The interface IF_RSPLFA_INFOPROV_DESC
    provides methods for retrieving the most important properties of an InfoProvider from the point of view of the implementation class of a planning function type.
    Methods GET_T_CHARNM and GET_T_KEYFNM return the names of the characteristics and key figures in the InfoProvider.
    You can get the properties of the InfoObjects and compound information by calling method GET_TAB_IOBJ_PRO and GET_TAB_IOBJ_CMP .
    Does this help?
    Best Regards
    Shyam

  • Automatic Benefit Plans based on Date Types in IT0041

    Hi
    I am having an issue with a re-hired employee. We have two date types in IT0041. Current Hire date and Service Award Date. If somebody is hired for 1st time, both the date types are same( e.g 12/12/2008). and this case the automatic benefit plans follow the config rules properly and some start from the hire date and some from the 1st of following month as per the config ruel.
    But If we are re-hiring an employee, in this case Current Hire date( 12/12/2008) would be different from Service award date ( because of his previous experience with this employer). In this case all the automatic plans are starting from the date when the re-hire action is performed, not even the re-hire date and do not follow the config rule at all.
    We have never made any dependency of benefit plan on IT0041 anywhere in config, but why this is happening? Any suggestion would be appreciated,
    Thanks
    Wills

    Nope. we never configured the dynamic eligibility part. So that makes it more strange. Because if all the date are same it works fine , but if the dates are different, it gives wrong result

  • Benefit Plan Termination Through ESS

    HI,
    can the benefit plan enrollment can be terminated in the portal ess...
    is there any standard available..
    Thanks,
    Nachy

    Hi,
    There  are standar I-views for this.
    log on the portal with the super user Id
    and follow following path
    Content Administration -> Portal Content -> Content Provided by SAP -> End User Content -> Employee Self-Service -> iViews -> Benefits and Payment -> United States ->  Benefits Participation , Enrollment , FlexBens Enrollment etc

Maybe you are looking for