Getting error after the DST patch - urgent

I am getting the following error message.
Validation Error
Examine and correct the following errors, then retry the operation:
Error - IOException in sending Request :: Connection refused: connect
I have applied the JVM patch and time zone patch without any errors.
Below are the steps to generate the above error message.
1. Launch the EM using browser.
http://MyServerName:1158/em/
2.Login as "sysman" and connect as "Normal".
3. Click on "Maintenance"
4. Click on "Export to Export Files"
5. Select Export Type as "Schemas" and click on "Continue"
The error appears at the above step.
I have Oracle 10g. (Version 10.2.0.1.0) on Windows 2003 Server.
There is no entry in the alert.log.
I have the following entry in "emdctl.trc".
(error = 10061)
2007-03-11 11:29:36 Thread-1980 ERROR main: nmectl.c: nmectl_validateTZRegion, agentTZoffset =-420,and testTZoffset for America/Los_Angeles:-480 do not match
2007-03-11 11:29:37 Thread-1980 ERROR main: nmectl.c: nmectl_validateTZRegion, agentTZoffset =-420,and testTZoffset for America/Los_Angeles:-480 do not match
2007-03-11 11:31:14 Thread-1112 WARN http: snmehl_connect: connect failed to (MyServerName:3938): No connection could be made because the target machine actively refused it.
(error = 10061)
It appears that this is a time difference between the OS and the Oracle system.
Please advice.
Thank you,

crystl32.ocx was retired in version 8.5 - almost ten years ago... Only reason I mention this is that if MS added something to oledlg.dll that makes the ocx not work, there is absolutely nothing that can be done in terms of fixes.
Now, to try to address the issue, you will have to provide more information:
1) What version of CR are you using?
2) What is the OS you are on?
3) What is the actual error message?
4) Can you duplicate the error on any computer that has the MS patch installed?
5) What message do you get when you try to manually register the ocx?
6) Do you have the latest patches for your version of CR?
Ludek

Similar Messages

TS3297 itunes 10.6.1 now asking for 3 security questions. After input I get "error in the itunes store -1202". I cannot purchase from the store.

Running Vista Ultimate. Itunes 10.6.1 is now asking to answer 3 security questions before accessing the store. After entry I get "error in the itunes store -1202" I cannot purchase music at this point. Any help is appreciated.

This problem is resolved. I deleted the old iTunes (with write permissions turned on for my account) and reinstalled successfully. Removing the deleted iTunes from Trash was troublesome even with root but after playing around with permissions and flags, I was able to remove it.

When i am on the 4 step in Search Result Display options, i get errors after 2 radio buttons

I am using Oracle portal 9.0.2 version
When i am on the 4 step in Search Result Display options, i get errors after 2 radio buttons
Default Search Results Page
This Search Portlet
An unexpected error has occurred (WWS-32100)
User-Defined Exception (WWS-11230)
Unknown Exception (WWC-45131)
ORA-20101:
ORA-06512: at "PORTAL.WWSBR_STDERR", line 437
ORA-06512: at "PORTAL.WWPOB_API_PAGE", line 3369
ORA-01403: no data found
ORA-01403: no data found (WWC-11230)
No data found (WWS-32101)
ORA-1403: ORA-01403: no data found
ORA-01403: no data found (WWC-36000)
Error: An unexpected error occurred: User-Defined Exception (WWC-43000)
Please help me with this one
P.S I tried to run inctxgrn.sql, but it did not solve the problem

i solved the problem by runing 2 scripts as a portal user
You can refer to bug - 2418089. This was fixed in 9.0.2.3
begin
wwpre_api_value.set_value_as_number
p_path => 'oracle.portal.search',
p_name => 'searchresultpageid',
p_level_type => wwpre_api_value.SYSTEM_LEVEL_TYPE,
p_level_name => null,
p_value => 6,
p_commit => true
commit;
end;
begin
wwpre_api_value.set_value_as_number
p_path => 'oracle.portal.search',
p_name => 'searchresultpagesiteid',
p_level_type => wwpre_api_value.SYSTEM_LEVEL_TYPE,
p_level_name => null,
p_value => 6,
p_commit => true
commit;
end;
NOTE - The difference is the value of 'p_name' attribute. If u see carefully it is 'searchresultpagesiteid'. The first time u run this the value is 'searchresultpageid'.

Test the DST patch

Is there a way to test the DST patches I just applied?

I think it 's going to work, especially after looking at the zdump.
This is what I ended up getting:
env | grep TZ
TZ=US/Eastern
zdump -v $TZ | grep 2007
US/Eastern Wed Mar 7 19:31:46 2007 UTC = Wed Mar 7 14:31:46 2007 EST isdst=0
US/Eastern Sun Mar 11 06:59:59 2007 UTC = Sun Mar 11 01:59:59 2007 EST isdst=0
US/Eastern Sun Mar 11 07:00:00 2007 UTC = Sun Mar 11 03:00:00 2007 EDT isdst=1
US/Eastern Sun Nov 4 05:59:59 2007 UTC = Sun Nov 4 01:59:59 2007 EDT isdst=1
US/Eastern Sun Nov 4 06:00:00 2007 UTC = Sun Nov 4 01:00:00 2007 EST isdst=0
cat /etc/TIMEZONE
#ident "@(#)init.dfl 1.6 00/05/27 SMI"
# This file is /etc/default/init. /etc/TIMEZONE is a symlink to this file.
# This file looks like a shell script, but it is not. To maintain
# compatibility with old versions of /etc/TIMEZONE, some shell constructs
# (i.e., export commands) are allowed in this file, but are ignored.
# Lines of this file should be of the form VAR=value, where VAR is one of
# TZ, LANG, CMASK, or any of the LC_* environment variables.
TZ=US/Eastern
CMASK=022
LC_COLLATE=en_US.ISO8859-1
LC_CTYPE=en_US.ISO8859-1
LC_MESSAGES=C
LC_MONETARY=en_US.ISO8859-1
LC_NUMERIC=en_US.ISO8859-1
LC_TIME=en_US.ISO8859-1
thanks for your HvR!

I tunes 11 will not let me sync my I pod nano... keep getting error meessage: the software required for this I pod was not installed correctly... I have tried to reinstall 6 times Dumped everything i tunes related no luck help!

I recently updated to Itunes 11 and now no sync... get error message: The software required for this I pod was not installed correctly. Please reinstall Itunes to install the required software. I backed up all music and deleted all related itunes items and still get this error after 6 attempts to reload itunes... i give up please help

I recently updated to Itunes 11 and now no sync... get error message: The software required for this I pod was not installed correctly. Please reinstall Itunes to install the required software. I backed up all music and deleted all related itunes items and still get this error after 6 attempts to reload itunes... i give up please help

Getting error after installing admt 3.2

hi team
i am getting error after installing the admt 3.2 on server 2008 R2 where i have installed sql server 2008 sp1 with express edition
the server is a DC
the error is "Unable to check for failed actions. :DBManager.IManageDB.1 Unable to retrieve the database file pagth from the registry. the system cannot find the file specified"
Thanks,
viraj

You should change the forum type on this to a question. The way you have this labled as a discussion not a problem.
See if the link below helps you out.
http://support.microsoft.com/kb/2266373
Paul Bergson
MVP - Directory Services
MCITP: Enterprise Administrator
MCTS, MCT, MCSE, MCSA, Security+, BS CSci
2008, Vista, 2003, 2000 (Early Achiever), NT4
http://www.pbbergs.com Twitter @pbbergs
http://blogs.dirteam.com/blogs/paulbergson
Please no e-mails, any questions should be posted in the NewsGroup. This posting is provided "AS IS" with no warranties, and confers no rights.

Trying to update iTunes, get error message "The older version of Bonjour cannot be removed" How do I remove it?

Trying to update iTunes on Windows XP, get error message "The older version of Bonjour cannot be removed." I have removed several copies of the file Bonjour in a couple of different folders but the error message persists. What am I missing??

Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. (The results from mydigitallife and Major Geeks are worth checking.)
After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove".
Quit out of CleanUp. Restart the PC, and try another iTunes install. Does it go through properly this time?

TS1424 I can't open iTunes. Get error message "the file iTunes library.itl cannot be opened because it was created by a newer version of iTunes"

I cannot open itunes. Getting error message: "the file iTunes library.itl cannot be read because it was created by a newer version of iTunes"
What do I need to do so I dont lose all my loaded music, etc.?
Thanks

If you still have an issue you may have to see about using the iTunes version (application) included with Snow Leopard 10.6 from the installer or an another one if available online, and see if that will install.
Sometimes you may have uninstall the bits left in your system by the earlier (or later) iTunes installers; as they all leave a trace and these can stop a different version of iTunes from being installed.
Not sure if the following site/link will tell the method...
•Apple - Support - iTunes - install & update:
http://www.apple.com/support/itunes/install/
•Troubleshooting iTunes installation on Mac OS X:
http://support.apple.com/kb/HT2311
Good luck & happy computing!
ps: i see you resolved this issue. it's magic!

HT201210 Trying to restore ipod and keep on getting error message: the ipod software update server could not be contacted. the network connection was reset

Hello can someone please help? Trying to restore ipod and I keep on getting error message: The IPod software update server could not be contacted. The network connection was reset. Make sure your network is active and try again.

Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- Try on another computer/network
- Wait if it is an Apple problem

Getting Error In the Routine - While writing Code for the Cross Reference.

Hi,
Getting Error In the Start Routine - While writing Code for the Cross Reference from the Text table ( /BIC/TZMDES with Fields /BIC/ZMDES(Key),TXTSH ) Getting Error as [ E:Field "ZMDES" unknown ].
Transformation : IOBJ ZPRJ3(Source) -> IOBJ ZPRJC ( Target ).
The Source Fields are: 0logsys(Key),zprj3(Key),ZDOM3.
The Target Fields are : 0logsys(Key),zprjc(Key),ZDOM3, UID.
Here i am trying to Update the target Field UID by Comparing the Source Field [ zprj3(Key)] with the Text table ( /BIC/TZMDES ) and update the UID.
The Code is as below:
Global Declarations in the Start Routine:
Types: begin of itabtype,
        ZMDES type /BIC/TZMDES-/BIC/ZMDES,
        TXT type /BIC/TZMDES-TXTSH,
         end of itabtype.
data : itab type standard table of itabtype
with key ZMDES,
wa_itab like line of itab.
Routine Code :
select * from /BIC/TZMDES into corresponding fields of table itab for
all entries in SOURCE_PACKAGE
where ZMDES = SOURCE_PACKAGE-/BIC/ZPRJ3.
READ TABLE itab INTO wa_itab
WITH KEY ZMDES = SOURCE_PACKAGE-/BIC/ZPRJ3
BINARY SEARCH.
IF SY-SUBRC = 0.
RESULT = wa_itab.
CLEAR wa_itab.
The tys_SC_1 structure is :
BEGIN OF tys_SC_1,
     InfoObject: 0LOGSYS.
        LOGSYS           TYPE RSDLOGSYS,
     InfoObject: ZPRJ3.
        /BIC/ZPRJ3           TYPE /BIC/OIZPRJ3,
     InfoObject: ZDOM3.
        /BIC/ZDOM3           TYPE /BIC/OIZDOM3,
     Field: RECORD.
        RECORD           TYPE RSARECORD,
      END   OF tys_SC_1.
    TYPES:
      tyt_SC_1        TYPE STANDARD TABLE OF tys_SC_1
                        WITH NON-UNIQUE DEFAULT KEY.
Please suggest with your valuable inputs.
Thanks in Advance

I have split the code in two.. one for start routine.. other for field routine.. hope this helps
Types: begin of itabtype,
ZMDES type /BIC/TZMDES-/BIC/ZMDES,
TXT type /BIC/TZMDES-TXTSH,
end of itabtype.
data : itab type standard table of itabtype
with key ZMDES,
wa_itab like line of itab.
Start routine
select * from /BIC/TZMDES into corresponding fields of table itab for
all entries in SOURCE_PACKAGE
where ZMDES = SOURCE_PACKAGE-/BIC/ZPRJ3.
Sort itab.
field routine
CLEAR wa_itab.
READ TABLE itab INTO wa_itab
WITH KEY ZMDES = SOURCE_FIELD-/BIC/ZPRJ3
BINARY SEARCH.
IF SY-SUBRC = 0.
RESULT = wa_itab-<field name>

Adobe reader (11.3.2) PDF's on ipad and getting error that the file is corrupt!!

i have the latest Adobe reader from the app store (11.3.2) however i am struggling to open PDF's on ipad and getting error that the file is corrupt!!
any help or suggestions welcome

Would you describe how you transferred the PDF file to your iPad and iPhone? Did you send it as an email attachment and open it on your iPad and iPhone?
The file may have been corrupted by Apple Mail, which is a known problem. Please see Problem #1 in the FAQ document How to avoid known PDF email attachment problems.
Would you try some experiments so that we can troubleshoot the problem? During the experiments, please use cloud storage (e.g. Acrobat.com, Dropbox, Google Drive, etc.) and avoid sending the PDF file as an email attachment.
Rename the corrupted/damaged PDF file on your iPad. For example, add "_damaged.pdf" to the file name.
Upload the corrupted/damaged PDF file to the cloud storage of your choice.
Download the corrupted/damaged PDF file from the cloud storage to your Windows or Mac desktop computer.
Open it in the desktop version of Adobe Reader XI for Windows or Mac.
Does Adobe Reader XI on your desktop computer display an error message?
Upload the (good) PDF file on your iPhone to the cloud storage.
Download the (good) PDF file from the cloud storage to your iPad.
Open it in Adobe Reader on your iPad.
Does Adobe Reader on your iPad display an error message?
We can investigate further based on what you will find.
Thank you for your help.

When trying to connect to Airplay speakers I get error message "The network connection timed out" although some sort of connection is made as the speaker is turned on. Same thing with Apple TV. Is the distance from my speaker/ TV the problem?

When trying to connect from iTunes to Airplay speakers I get error message “The network connection timed out” although some sort of connection is made as the speaker is turned on. Same thing with Apple TV. Is the distance between my PC and the speaker or the AppleTV the problem?

Hi whitwick,
If you are having issues with your network connection when attempting to use AirPlay, you may want to use the steps in this article to troubleshoot -
iTunes: Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/TS5209
Thanks for using Apple Support Communities.
Best,
Brett L

Problem accessing iTunes. Getting error message "The iTunes Library Extras.itdb file is on a locked disk"?

Problem accessing iTunes. Getting error message "The iTunes Library Extras.itdb file is on a locked disk"

Close iTunes, delete iTunes Library Extras.itdb from your iTunes folder, start iTunes. iTunes should rebuild the file automatically.
tt2

I am trying to activate new itunes card. I am getting error message: The code you have entered has not been properly activated. Does this mean the store did something wrong or me?

I am trying to activate new itunes card. I am getting error message: The code you have entered has not been properly activated. Does this mean the store did something wrong or me?

Yes, the store didn't properly activate the card. If the store is nearly then you could try going back and asking them to do so, if it isn't (or if they can't/won't help) then try contacting iTunes Support (you will probably need to give them images of the front and back of the card, and possibly its receipt) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then iTunes Cards And Codes

Application is throwing NSAPI and other errors after the migration

We started seeing NSAPI and other errors after the migration of new codes and recently make some changes
1) During the migration, all the 4 WLS cluster instances were bounced simultaneously. What is the best practice and recommendation from BEA Oracle? Do we need to bounce it one by one for any specific reason?
2) we recently introduced the 4th weblogic cluster instance on Solaris 10 zone. All other WLS instances are running on Solaris 8.
Is it okay to have two different OS versions( Solaris 8 and Solaris 10) and different hardware to host WLS cluster instances? Does BEA Oracle support this kind of configuration?
3) We are consistently seeing below errors in the iplanet web server error logs even though site is working fine
[11/Sep/2009:08:53:50] failure ( 4453): for host XX.XX.XX.XX trying to POST /servlet/FSO, wl-proxy reports: exception occurred for backend host 'YY.YY.YY.YY/23120/0': 'CONNECTION_REFUSED [os error=0, line 1732 of URL.cpp]: Error connecting to host YY.YY.YY.YY.YY:23120'
Do we need to upgrade our WLS proxy plugin? . Current version of WLS proxy plug-in is libproxy_61.so. Our Weblogic version is WLS 92 MP2
I'll really appreciate if some can anwsers those questions

OK booted in to Virtualbox, seems too be working fine this way, maybe it is the ATi drivers
any Help would be appreciated

Getting error after the DST patch - urgent

Similar Messages

Maybe you are looking for