Getting Error Message "Error '9' when calling service 'SO_OBJECT_SEND'

Hi All,
We are working on SRM5.0(with servier 5.5 paching 14) and ECC (R/3) with SAP appl 600(16 th patch).but the workflow is giving the error   "Error '9' when calling service 'SO_OBJECT_SEND'  and PO is still in the awating approval status.
Regards
Channappa Sajjanar

Hi,
See  this related thread:
Re: Workflow Error  --  Error' 9' when calling service ' SO_OBJECT_SEND'

Similar Messages

  • Error '9' when calling service 'SO_OBJECT_SEND'

    We are implementing travel module. The scenario is when the employee raises a travel request, after approving the mail should be sent back to the employee. This feature is provided by the standard.
    However in the SEND_MAIL step the WORKFLOW Container variable 'Employee.Trip.User.Id' is not set owing to which the mail step gives out error.
    Can anyone please guide us on the probable cause of the error ?? Where does the object TRIP gets the value 'TRIP.USER.ID' ??
    Is it any setting issue ??
    Please guide..

    Hi
    Run report HRALXSYNC  and you will solve this.
    We have faced this issue many times and the solution we have applied is
    1. This issue occurs on a step that is dialog where some agent needs to either approver or reject.
    2. You should check the rule (Agent determination rule in that step).
    Run that rule with the workflow data (use scenario with which you are getting error).
    Run the rule individually and check if you are getting right result.
    this error most of the time id due to the fact that the rule is not be able to determine next processor of the workitem.
    Error 9 when calling service SO_OBJECT_SEND SWF_RUN535
    to assure you can hardcode the user for test in the rule and run the workflow as that is the most effective analysis that will help you determine the cause.
    I have never seen this error on a background step unless there is a mail step involved.
    You need to run the report HRALXSYNC to synchronize HR objects which will surely solve this issue.
    regards
    barin

  • SRM Workflow error-  Error' 9' when calling service ' SO_OBJECT_SEND'

    Hi Team,
    We are facing problem with SAP SRM Workflow error-  Error' 9' when calling service ' SO_OBJECT_SEND' .
    Due to this WI is not going to Approver/Requester INBOX and unable to process that WI.
    Please advice .
    Greatly Appreciated for Help.
    Regards
    CK

    Hi,
    Not sure what '9' is, the exceptions called by the SO_OBJECT_SEND function are as follows:
    EXCEPTIONS
                   ACTIVE_USER_NOT_EXIST      = 35
                   COMMUNICATION_FAILURE      = 71
                   COMPONENT_NOT_AVAILABLE    = 01
                   FOLDER_NOT_EXIST           = 06
                   FOLDER_NO_AUTHORIZATION    = 05
                   FORWARDER_NOT_EXIST        = 08
                   NOTE_NOT_EXIST             = 45
                   OBJECT_NOT_EXIST           = 13
                   OBJECT_NOT_SENT            = 15
                   OBJECT_NO_AUTHORIZATION    = 13
                   OBJECT_TYPE_NOT_EXIST      = 17
                   OPERATION_NO_AUTHORIZATION = 21
                   OWNER_NOT_EXIST            = 22
                   PARAMETER_ERROR            = 23
                   SUBSTITUTE_NOT_ACTIVE      = 31
                   SUBSTITUTE_NOT_DEFINED     = 32
                   SYSTEM_FAILURE             = 72
                   TOO_MUCH_RECEIVERS         = 73
                   USER_NOT_EXIST             = 46
                   OTHERS                     = 1000.
    Regards,
    Jason

  • Workflow Error  --  Error' 9' when calling service ' SO_OBJECT_SEND'

    Hi ,
    Could  you  pls tell me what will be the reason for this Error' 9' when calling service ' SO_OBJECT_SEND'
    Thanks & Regards,
    Gopal

    Hello
    reason could be lot of things:
    check the note 938147 for example...
    Another helpful note is the 190669
    regards,
    daniel

  • Error '20' When calling Service 'SO_OBJECT_SEND'.

    Hi Experts,
    In my work flow I am using step to send mail.
    While executing the workflow this step is throwing the above error 'Error '20' When calling Service 'SO_OBJECT_SEND'.
    Please help me in this case.
    Regards,
    Nayani

    Hi Nayani
    Please go to the technical WF log, select the mail step in error and check the container element ADDRESSSTRING - it should have valid values. If there is no value or at least one line, that is the cause of your error.....this means you will have to correct the method/process/code/ where you are fetching the email addresses.
    regards,
    Modak

  • Why do I get Error -1073807343 when calling the open visa function ?

    Hello,
    I am running a Labview 6i under Linux (kernel 2.4) and I have Error -1073807343 when calling the open visa function. I have verified the name of the session (GPIB0::9::INSTR), and I can communicate with my instruments with ibic.
    More informations : I use NIVISA 2.5 and nigpib-0.8.2. I have downloaded the lastest drivers of my instruments but it doesn't work better.
    Thanks very much for your help.

    We've had several NI-VISA releases since 2.5 - so I suggest you upgrade to NI-VISA 3.0. While there isn't anything specific to your type of problem in the Linux version of our readme.txt, I know we've made a number of other fixes.
    While the most recent release is NI-VISA 3.1, I still recommend you upgrade only to 3.0.
    This is because NI-VISA 3.1 requires the new NI-488.2 release for GPIB-ENET to be installed (even though you aren't using that product). This is due to some internal rearchitectures, and the PCI-GPIB product is not released. If you do want to go with NI-VISA 3.1, the new NI-488.2 release for GPIB-ENET on Linux will still work with the PCI-GPIB beta driver that you have installed.
    Dan Mondrik
    National Instruments

  • Why do I get error -17500 when calling a batch file using the call executable step type?

    I am calling a batch file using the call executable step type. If the path to the batch file contains a space I get error -17500 and a message stating there was an error in "Post". For example the path to the batch file is "c:\TestWin\Test Files\...\Program.bat" When I run this I get the above mentioned error, however if I change my directory structure so the path is now "c:\TestWin\TestFiles\...\Program.bat" it runs fine. I use the browse feature to find my batch file so it is not me typing in a path incorrectly. I have removed the batch file and I get a different error stating that it couldn't find the file so it appears that for my error it can find the file but can't run it. I am
    sure that this has something to do with the fact that batch files are written in DOS but really don't want to resort to changing my directory structure on all my test stations. Is there any way to fix this problem so I can leave a space in my path?

    It appears I have figured it out. This was on another computer so I was unaware of how they used their computer. I like you got it to work in the temp directory and in fact got the program.bat file to work as long as I put it under the temp directory, but when I switched out to my TestWin directory it wouldn't work, so I removed everything from the directory except the batch file it self and it work. What I found out after adding files in one at a time is that the person had a file called "Test" with no file extension in there "c:\TestWin\" directory. Removing this file made it work. Putting the file back broke it. So it appeares that when teststand was running it followed the path saw a space and attempted to grab the "Test" file instead of bro
    wsing into the "Test Files" directory. If you create a file in your temp directory called "temp" with no file extension you will see the same problem. Thank you for your help.

  • I get error 998 when calling a LabVIEW buildt DLL from MSVC++

    I created a DLL in LV 6.0.2. This DLL contains 39 VIs and controls. 13 of the VIs are exported, the others are subVIs, which one of them is a dynamic VI.
    I do not have all connectors used by defining the VI prototype in the build file for the application builder.
    Using this DLL I get four effects:
    From LV 6.0.2 FDS all works fine until I quit LV immediatly after the application VI stoppes. Then LV wants to save some of the VIs of the DLL.
    If I do the same but close the VI before I quit LV one want save anything.
    After Building an exe from the application VI and running the exe all works fine. The VI will only stop and if I close or quit noone wants to save something.
    Then I built an application with M
    SVC++ 6.0 using this DLL. There will be no errors or warnings during the build. If I start the application i get an error message dialog with the number 998 stating "system error loading LV Runtime engine. My application needs a Version 6.0 or compatible Runtime-engine". The path to teh Runtime-engine is given in the dialog and the lvrt.dll there has version 6.0.2.
    Does someone run on such a problem?
    Has someone a solution to this?
    Waldemar
    Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
    Don't forget to give Kudos to good answers and/or questions

    Waldemar,
    I. LabVIEW wanting to save VIs
    The DLL created is just a group of VIs, not actually compiled DLL code. When the subVIs are called, they might be cached from the disk copy, not the one in the DLL. LabVIEW then loads the separate copy of that subVI. It will then ask if you want to save changes because there were value changes when it was run (this makes since) or it is in LabVIEW 6.0 version and has not been mass compiled for LabVIEW 6.0.2. When it is compiled to an exe, the search path for the subVIs goes through the executable and not the LabVIEW development environment. Also, saving VIs is not an option in an executable so the save dialog does not pop up.
    II. MSVC++ error
    This is actually a Microsoft issue. It has something to do with static and
    dynamic linking of the MFC DLL. Our R&D engineers have verified this with projects created with no LabVIEW code at all (that is why we believe it to be solely a Microsoft issue). There are three options at this time:
    1. Link with the DLL form of MFC.
    2. Do not link with the .lib from the LV DLL, instead use LoadLibrary and GetProcAddress to dynamically load the DLL and call the function.
    3. Use the VC delayload feature to make the LV DLL not get loaded until the first call is made into it. See VC help on "delayload" for information on setting this up.
    Randy Hoskin
    Applications Engineer
    National Instruments
    http://www.ni.com/ask

  • Data Quality vendor-specific error: An error occurred when calling function 'sdq_init_connector ()' in connector ": "(-8) Exception!." Detailed error message: Exception thrown by Java: java.lang.UnsatisfiedLinkError: nio (Not found in com.ibm.oti.vm.boots

    When attempting to create a new Account in siebel integrated with OEDQ the following error occurs.
    ERROR
    Data Quality vendor-specific error: An error occurred when calling function 'sdq_init_connector ()' in connector ": "(-8) Exception!." Detailed error message: Exception thrown by Java: java.lang.UnsatisfiedLinkError: nio (Not found in com.ibm.oti.vm.bootstrap.library.path)(SBL-APS-00118)
    STEPS
    The issue can be reproduced at will with the following steps:
    1) from EDQ director we have imported the EDQ_CDS,EDQ-REFERENCE DATA & EDQ_HISTORICAl DATA packages sucessfully.
    2) Created dnd.param file in SIebel server SDQCOnnector folder.
    3) Copied the libdnd.so file to siebsrvr lib directory(32 bit)
    3) In dnd.param file we have mentioned the javalib file and instllation directory path(<Siebsrvr roo>/dnd/install)
    4) Unzipped the EDQ-Siebel Connector files in dnd/install folder
    5) Copied the dnd.properties file in dnd/install directory and modified it accordingly to point to installed EDQ instance.
    6) Configured the Siebel components for EDQ integration.
    7) Realtime EDQ jobs are running.
    8) Create a new Account
    Env details are
    On : 8.2.2.14 [IP2014] version, Client Functionality
    EDQ 11.1.1.7.4
    IBM JDK 1.7 32 bit
    Using Open UI
    Any Champ have faced this issue and overcame it please let me know the resolution steps. your help is
    Regards
    Monoj Dey
    9007554589

    Hi Monoj,
    A few questions:
    - What OS is Siebel running on?
    - What version of the Siebel connector are you using?
    - Which libdnd.so file are you using?
    - What's the contents of your dnd.parms file?
    thanks,
    Nick

  • XP Services dont start up; get Error 1068 when try to manually start them.

    Hello, I'm running Win XP Pro SP3 on a Lenovo T42, which was running fine.  When I boot now, only 25 services start up, and I cant get to Internet or run some key apps. When I use Services.MSC to show the services, many Automatic services are not running.
    When I try to start Network Connections, for example, I get Error 1068, 'The dependency service or group failed to start.'
    When I try to run System Restore from MSConfig, I get 'System Restore is Not Able to Protect Your Computer'.
    I've tried various configurations under MSConfig?General and the results are the same.
    Any ideas are appreciated.  Thanks....BT

    You can read through these Microsoft Knowledge based articles which may resolve some of you issues 
    1) http://support.microsoft.com/kb/827328
    2)http://support.microsoft.com/kb/888016
    Cheers and regards,
    • » νιנαｿѕαяα∂нι ѕαмανє∂αм ™ « •
    ●๋•کáŕádhí'ک díáŕý ツ
    I am a volunteer here. I don't work for Lenovo

  • HT201210 i keep getting error 3194 when restoring ??

    I keep getting error 3194 when restoring ipad help ???

    From 2nd link below.
    Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
        1.    Install the latest version of iTunes.
        2.    Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
        3.    Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
        4.    Try to restore from another known-good computer and network.
        5.    If the errors persist on another computer, the device may need service.
    Update and restore alert messages on iPhone, iPad, and iPod touch
    http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
     Cheers, Tom

  • Error 512 when calling PEOpenPrintJob

    Post Author: gnilsen
    CA Forum: Crystal Reports
    Hello,
    I'm using a product called Dexterity which is for the Microsoft Dynamics platform.  We use crpe32.dll to run our crystal reports from our application.  First of all, when Crystal 10 was installed we used crpe32.dll with a date of 06/13/2004 and my reports print just fine.  When I upgrade to Crystal XI, initial install, I get a crpe32.dll with a date of 12/07/2004 and my reports don't print.  I get the error 512 when calling PEOpenPrintJob.  So I figured I would move up to SP4 for Crystal XI and which provided crpe32.dll 05/27/2007 1:12 AM. I tried to run the reports with that .dll and I run into the same error.  From my research I see that error 512 is PE_ERR_ENGINENOTOPEN or Print Engine Not Opened. 
    Here is where my report is located and this is what I pass into PEOpenPrintJob: "C:\MBS\GP10\WennSoft\Crystal Reports\Service WIP Summary.rpt"
    I have tried a few different approaches trying to get this to work and here is some of my troubleshooting ending up with no luck.  I took my Crystal 10 report and saved it as a Crystal XI report and that didn't work.  I tried to use the old crpe32.dll from Crystal 10 and the program is smart enough to grab the latest crpe32.dll from the C:\Program Files\Common Files\Business Objects\3.0\bin folder.  The report does have sub reports in it, but my code starts with trying to get the main report Print Job first and it doesn't even get to the code for the sub reports.  (I don't know if that helps but I trying to give as much info as possible.)
    1) Is there anything I need to do different in Crystal XI? 
    2) Do I need to call something before PEOpenPrintJob? 
    Thanks in advance.

    Hi Nayani
    Please go to the technical WF log, select the mail step in error and check the container element ADDRESSSTRING - it should have valid values. If there is no value or at least one line, that is the cause of your error.....this means you will have to correct the method/process/code/ where you are fetching the email addresses.
    regards,
    Modak

  • HT201413 I get error 20 when I try to download updates to installed Apple software  I have two users on the IMac. I resolve the problem by clearing all cookies on both users Safari. Why do I need to do this? What is going on?

    I get Error 20 when I try to download updates for installed Apple apps on my IMac.  I have two users on the IMac, and I resolve the problem by clearing all cookies on both users Safari, opening and closing the App Store for each user, shutting down and restarting the IMac for each user, until finally the download works. There must be an easier way.  I also have an Air, where I have no problems whatsoever. Both machines have Doorstop and MacKeeper with the same settings, so I have ruled those programs out as the cause. I believe iot is because I have two users - any ideas?

    Please read this whole message and be sure you understand all of it before doing anything. Back up all data before making changes to your settings.
    Write down the server addresses.
    Click Cancel to close the Advanced sheet. Unlock the preference pane, if necessary, by clicking the lock icon in the lower left corner and entering your password. Open the DNS tab again and change the server addresses to the following:
    8.8.8.8
    8.8.4.4
    That's Google DNS. Click OK, then Apply.
    In Safari, select
    Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
    and confirm. If you’re using another browser, empty the cache. Test. Any difference?
    Notes:
    1. If you lose Internet access after making the above change to your network settings, delete the Google servers in the Network preference pane, then select the TCP/IP tab and click Renew DHCP Lease. That should restore the original DNS settings; otherwise restore them yourself.
    2. I’m not advocating Google or anything else as a DNS provider; the server addresses are offerred merely for testing purposes. There may be privacy and technical issues involved in using that service, which you should investigate personally before you decide whether to keep the settings. Other public DNS services exist.

  • I keep on getting error 16 when updating. please assisy

    I keep on getting error 16 when trying to update my phone. Please assist. It will not start anymore

    Check for hardware issues
    Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
    These errors mean that your device or computer may have a hardware issue that's preventing the update or restore from completing.
    Check that your security software and settings aren't preventing your device from communicating with the Apple update server.
    Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
    Confirm that your security software and settings are allowing communication between your device and update servers.
    If you still see the error message when you update or restore, contact Apple support.
    Check for outdated or modified software
    Related errors: 1015, “The required resource can't be found.”You might see these error messages if any of these are true:
    Your device has a beta version of iOS.
    You're trying to install an earlier version of iOS (downgrading).
    Your device has unauthorized modifications to iOS, also called "jailbreaking."
    Use recovery mode to restore your device to the latest version of iOS

  • Error ME006 when releasing Service entry Sheet in ML81N

    Dear Gurus,
    There is a Pop up error message, when service entry sheet is release and saved (Error ME006 when releasing Service entry Sheet in ML81N ). BUt after ingnoring, the service entry sheet is released. Please advice what is the issue with this error ME006 Message
    One more confiq - in SM31 >> T100 (Table) >> ME (message class) >>> Message number 006 - Self explantatory is ticked.
    Thanks
    RS
    Edited by: Ramapuram Saravanan on Jan 20, 2009 10:39 AM

    Please check the lock entries in the Transaction code SM12,there must be one lock entry for this.
    Please delete it.
    Regards,
    Manish

Maybe you are looking for