Getting ewrror while creating GD view Extracter

Hi,
I was try to create genric extractor where i was getting error
While creating view generic extractor where i am getting error "Entry A V_ZFRT does not exist in DD02L - check your entry".
My requirement is need to create extractor which is getting populated from three modules like SD,MM,FI/CO.From these three module i am using several tables and some of the tables don't have relation between these tables as like foreign key and refrence key.
Which extractor i need to create as given scenario?
Does view will fulfill with my requirement or any other extractor.
Please some one can help me in this scenario.
Answer would be great appreciate.

Hi Lars,
Thanks for the reply.
If i understood correctly , you are suggesting to create var_out1 and var_out2 in output ? If yes can you please guide me on how to do that? I tried but did not find anything suitable to declare table.
Thanks,
Girdhari

Similar Messages

Getting Error while creating Calculation view.

Hi Expert,
I was trying to create one simple calculation view using SQL script but getting below error.
/********* Begin Procedure Script ************/
BEGIN
create type var_out1 as table (ebeln varchar(10),menge decimal);
        var_out = CE_COLUMN_TABLE ("SAPEH2"."EKKO",[EBELN,AEDAT] );
        var_out1 = CE_COLUMN_TABLE ("SAPEH2"."EKPO",[EBELN,MENGE] );
        var_out2 - CE_UNION_ALL (:var_out1,:var_out2);
END
/********* End Procedure Script ************/
I thought , i might need to declare a table type for output table var_out1 and var_out2. I tried by declaring table like below couldn't get any success.
create type var_out1 as table (ebeln varchar(10),menge decimal);
create type var_out2 as table (ebeln varchar(10), aedat DATE ,menge decimal);
error:
Message :
     Internal deployment of object failed;Repository: Encountered an error in repository runtime extension;Internal Error:Deploy Calculation View: SQL: sql syntax error: CREATE TYPE is not allowed in SQLScript: line 5 col 2 (at pos 277)nSet Schema DDL statement: set schema "SAPEH2"nType DDL: create type "_SYS_BIC"."pkg-sapuser03.test_giri/CA_SALES1/proc/tabletype/VAR_OUT" as table ("EBELN" VARCHAR(10), "AEDAT" DATE, "MENGE" DECIMAL(13,3))nProcedure DDL: create procedure "_SYS_BIC"."pkg-sapuser03.test_giri/CA_SALES1/proc" ( OUT var_out "_SYS_BIC"."pkg-sapuser03.test_giri/CA_SALES1/proc/tabletype/VAR_OUT" ) language sqlscript sql security definer reads sql data as n /********* Begin Procedure Script ***********/ n BEGIN n n create type var_out1 as table (ebeln varchar(10),menge decimal);n create type var_out2 as table (ebeln varchar(10), aedat DATE ,menge decimal);n n t   var_out = CE_COLUMN_TABLE ("SAPEH2"."EKKO",[EBELN,AEDAT] );n t   var_out1 = CE_COLUMN_TABLE ("SAPEH2"."EKPO",[EBELN,MENGE] );n t   var_out2 - CE_UNION_ALL (:var_out1,:var_out2);nnEND /******** End Procedure Script ************/n
Could you please help me to understand the cause of this?
Thanks,
Girdhari

Hi Lars,
Thanks for the reply.
If i understood correctly , you are suggesting to create var_out1 and var_out2 in output ? If yes can you please guide me on how to do that? I tried but did not find anything suitable to declare table.
Thanks,
Girdhari

Getting prob while creating view in webdynpro ABAP application

Hi Guys,
I am facing a problem while creating a view for webdynpro ABAP application. It is giving an error as "ICF service "/sap/public/bc/WebDynpro/ViewDesigner" inactive".
can anybody let me know how to solve this problem.
Thanks In Advance
Regards
Ravikumar

I think check Internet explorer Tools ->Internet Options ->Connections.>Lan Connections> if the proxy or anyting checkbox is clicked coz it doesn't work with Internet on .
Please reward if useful.

Getting Error while creating Genric Datasource

Hi,
I was try to create genric extracter where i was getting error
While creating view genric extracter where i am getting error "Entry A ZV_ZFRT does not exist in DD02L - check your entry".
My requirement is need to create extracter which is getting populated from three modules like SD,MM,FI/CO.From these three module i am using several tables and some of the tables don't have relation btween these tables as like foreign key and refrence key.
Which extracter i need to create as given scenario?
Does view will fullfill with my requirement or any other extracter.
Please some one can help me in this scenario.
Answer would be great appreciate.

Hi,
Rather than writing a program write a function module. Create a structure and include all the necessary fields in the structure. Then in the function module write the logic to extract the values for those fields. While creating the datasource specify the function module and structure name.
Refer this link:
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
Hope this helps.
PB

Error while creating parameterise view

I m getting below error while creating parameterise view
CREATE OR REPLACE VIEW rdr_le_info_view (v_run_number , v_isin_cob )
AS
SELECT l.strategic_le
,cun.ucn cunucn
,cun.date
,cccs.ucn ucn
,cccs.agr_num
FROM strat_le l
,ucn_name cun
,customer_setup cccs
WHERE l.gfa_until_dt = '31-dec-9999'
AND l.glas_until_dt = '31-dec-9999'
AND l.int_until_dt = '31-dec-9999'
AND cccs.run_num = v_run_num
AND cccs.ucn_lead_office = cun.ucn
AND cun.OID = l.client_oid;
AND cccs.run_num = v_run_num
ERROR at line 13:
ORA-00904: "V_RUN_NUM": invalid identifier
Plese help me in above.

Try
CREATE OR REPLACE VIEW rdr_le_info_view
AS
SELECT l.strategic_le
,cun.ucn cunucn
,cun.date
,cccs.ucn ucn
,cccs.agr_num
FROM strat_le l
,ucn_name cun
,customer_setup cccs
,cccs.run_num run_num
WHERE l.gfa_until_dt = '31-dec-9999'
AND l.glas_until_dt = '31-dec-9999'
AND l.int_until_dt = '31-dec-9999'
AND cccs.ucn_lead_office = cun.ucn
AND cun.OID = l.client_oid;Then call it like:
select *
from rdr_le_info_view
where run_num = v_run_num;

Error While Creating Materialized View

Hello,
I am getting error ORA-22818: subquery expressions not allowed here while creating materialized view. I am using Oracle9i Enterprise Edition Release 9.2.0.1.0. Below pasted is my SQL Script.
Any help is highly appreciable.
Thanks
*********SQL************
select distinct(id),NAME,(select count(GRADE) from employees where
nationality like '%US%'and id=a.organization_id and grade=a.grade
group by ID,GRADE) US,(select count(GRADE) from employees where
nationality not like '%US%' and organization_id=a.organization_id and grade=a.grade
group by ORGANIZATION_ID,GRADE) NON_US,grade from employees a
where grade is not null
group by GRADE,ID,name
order by to_number(grade) desc

Hi,
This is a documented restriction on MVs. You cannot have a scalar express (i.e a select statement) in the select list.
You can get round this by joining your select count(grade).. expression in as an inline view in your FROM clause. Or you can create a normal view without the scalar expression, create your MV as a select from this view, then re-define your view to contain the query you want.
Hope that helps,
Rod West

TP CONFIGURATION PROBLEM ( While creating a View Controller in Component )

Hi All,
     I have a problem in TP Config while creating a View Controller in a component i am getting this Exception
    Parameter lsm(&1) not in version 0004(&2) of tp configuration .
    This Exception Raised from this Function Module : RS_ACCESS_PERMISSION
Any on can please help me to come out of this issue.
Regards And Thank you,
Nirmala.K

Sounds like you should be using one of the Apps forums, perhaps {forum:id=210}

Problem while creating help view.

hi experts,
i'm creating a help view.
my base table is mara.
i've to link it up with mast table.
while creating help view, when i see its relationship with mast table its under the section ("Relationships with unsuitable cardinality").
when i click on it and then click on copy.
it doesnot get copied.
what is the reason and how should i go about it.
plz help.

hi
good
go through this link ,which ll give you detail idea about the help view
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ed13446011d189700000e8322d00/content.htm
thanks
mrutyun^

Getting error while creating the variable of Schema Element type

Hi everybody,
For creating a variable of schema element type I am doing the following steps...
Select 'Variables' after right clicking on bpel process. IN this window, go to 'Create VAriable' then select 'Element' type. Now in Type Choose, I expanded the my imported schema files. And selected a element type, then click ok to create this variable... I am getting the message...
IN ORDER TO SAVE IMPORTED WSDL/SCHEMA FILES, YOU MUST HAVE A PARTNER LINK LOCATED UNDER THE CURRENT PROJECT DIRECTORY.
What is mean by that.
I have imported the schema files in project. AFter that I have imported them into the WSDL also. Now why I am getting error while creating the variable. However I can create variable directly in .BPEL file then everything is fine. And it is working also. But what is mean with the above error? Why I am not able to create variable through GUI?
Thanks.

Hi,
I have this same problem this morning, and I was going crazy, until I found this webpage on the internet:
[http://technology.amis.nl/blog/1803/problem-importing-xml-schema-in-bpel-process|http://technology.amis.nl/blog/1803/problem-importing-xml-schema-in-bpel-process]
The idea is that the jdeveloper is not very good working with directories with spaces on the directory name. If you move all your work to a directory without spaces, it will work smoothly. At least, it had worked for me.
Regards,
Nacho

Getting error while creating the Shopping cart.

Hi ,
I am getting error while creating the Shopping cart.
a.Error in account assignment for item 1 (Item Testing SC )
b.Duplicates of Cost Centre T10063 are defined in SRM (Item Testing SC )
Kindly provide the solutions.
Thanks,
Dev

Try the following in the ERP backend system:
Standard Hierarchy Inconsistencies
Issue: one Cost Center is repeating in more than one node in Cost Center Standard Hierarchy.
Update from SAP Global support, the following was the email received:
in transaction KSH3 please run both the ambiguity and completeness check(Menu -> Extras -> Check and Help functions).
If you think that your standard hierarchy is inconsistent you can check that as following:
Run transaction Extras -> Hierarchy - Master data -> Test. The result shows you if there are in consistencies. If that is the case run also Extras -> Hierarchy - Master data -> Comparison.
Alternatively, you can run the report 'RKCORRH1' (TN SE38).
Run both the Hierarchy->Master data->test and the
Hierarchy->Master data->comparison.
As stated above inconsistency message showed after Test. Run the comparison and you get a similar message.
Once the above two are run, again when you go to test, the inconsistency disappears.

Error while creating Materialized View step 3 of 6 using wizard

have oracle 9i Rel 1 on Windows 2000 server. Master Site has been setup. Database links are created at Materialized view site. But while creating Materialized View Group using wizard there is following error on step 3 of 6.
Statement:----------------
/*OracleOEM*/ SELECT 1 FROM SYS.dba_constraints@masterdbname WHERE OWNER='username' and table_name='tabname' AND constraint_type='P'
Stack Trace:----------------
ORA-00942: table or view does not exist.
ORA-02063: preceding line from masterdbname.
All parameters for replication are correct.
Please help me early.
Thanks

Hello,
In the masterdbname, logging as sys user, you must grant select permission on sys.dba_constraints view to mvadmin_dbname user (where dbname is the replicated database name).
Regards,

Error while creating Materialized View step 3 of 6

I have oracle 9i Rel 1 on Windows 2000 server. Master Site has been setup. Database links are created at Materialized view site. But while creating Materialized View Group there is following error on step 3 of 6.
Statement:----------------
/*OracleOEM*/ SELECT 1 FROM SYS.dba_constraints@masterdbname WHERE OWNER='username' and table_name='tabname' AND constraint_type='P'
Stack Trace:----------------
ORA-00942: table or view does not exist.
ORA-02063: preceding line from masterdbname.
All parameters for replication are correct.
Please help me early.
Thanks

Hello,
In the masterdbname, logging as sys user, you must grant select permission on sys.dba_constraints view to mvadmin_dbname user (where dbname is the replicated database name).
Regards,

Methodology/Processes Not getting reflected while creating a role via BRM in GRC

Hello All,
The methodology I have created is not getting reflected while creating a new Single role.
I have maintained the condition groups properly in decision table, and assigned the same to the methodology as well.
Please suggest.
Thanks
Regards,
Shruti

Methodology is updated when you press save after completing the first step.
can you please share screen shots of configuration and issue you are getting

Getting error while creating Business Action with EDI EDIFACT 837 document.

Hi,
When I am trying to create a business action with EDI 837 ‘.ecs’ file, I am getting a error. It is not creating the business action. Even it is not displaying any error details.
Please help me in resolving this issue as it's very urgent.
Thanks in advance.

Hi Jyotirmoy,
What error you are getting exactly while creating the business action? Did you try to create business action for any other protocol? If not, then please try to create business action for any other protocol and check whether you are getting the same error over there also.
Regards,
Anuj

Getting error while creating users in Peoplesoft

Have a good day
new fresh instance installed , getting error while creating users in peoplesoft
SQL ERROR FUNCTION SQLExec
ERROR POSISTION 52
RETRUN 904- ORA-00904 PSWDREQUPPER invalid identifier statement, select minpsdlength
pswdreqspecial pswdreqlower
PSWDREQUPPER, PSWDREQDIGITS,ALLOWDOPRID,PSWDEXPIRESDAYS FROM PSSECOPTIONS
original statement: SELECT MINPSWDLENGTH PSWDREQSPECIAL PSWDREQLOWER PSWDREQUPPERS
PSWDREQDIGITS, ALLOWOPRID, PSWDEXPIRESDAYS FORM PSSECOPTIONS

>
RETRUN 904- ORA-00904 PSWDREQUPPER invalid identifier statement, select minpsdlength
pswdreqspecial pswdreqlower
PSWDREQUPPER, PSWDREQDIGITS,ALLOWDOPRID,PSWDEXPIRESDAYS FROM PSSECOPTIONS
original statement: SELECT MINPSWDLENGTH PSWDREQSPECIAL PSWDREQLOWER PSWDREQUPPERS
PSWDREQDIGITS, ALLOWOPRID, PSWDEXPIRESDAYS FORM PSSECOPTIONS
>
How is it possible that the first statement has ALLOWDOPRID column that does not exist, where as the original statement has ALLOWOPRID which does exist?
How is it possible that the second original statement has two more errors:
PSWDREQUPPERS should be PSWDREQUPPER
FORM should be FROM.
Please provide the actual error which is being raised, without editing.
Hakan

Getting ewrror while creating GD view Extracter

Similar Messages

Maybe you are looking for