Getting incoming filename in error handling orchestration

I have created an error handling orchestration. It is subscribed to all "FailedMessage" types for a specific port. When I get these messages within my error handling orchestration I need to capture certain information. I'm not seeing a way to capture
the incoming filename. Certain objects don't seem to be available to me within this orchestration. I can use %SourceFileName% on the outgoing port, but I need to record this info to a database table, so I need this item within the orchestration.
Any ideas?
Thanks.
Raymond

You mean Direct bound in the Orchestration? That, as opposed to Specify Later, would not affect the Message Context in any way, especially the FILE.ReceivedFileName property.
To test, you can Stop the Orchestration and drop the file. The Message will Suspend where you can examine the entire Context.

Similar Messages

Get original message via Error handling orchestration

I have an orchestration that handles error messages. It pulls error messages from the msgbox via a direct port. Here is my dilemma...my messages are X12 837 claim files, and if a message errors out we need to be able to view the original, non-XML version
of the message so we can fix it and re-submit it. Is there any way for me the get that original version of the message from my error handling orchestration? The only option I can think of is to record the message to a table from the incoming pipeline, just
before the disassemble stage, and then have it in case I need it later.
Are there any other options?
Thanks.

It depends on how you're handling the incoming Interchange.
There is no way to get the EDI for a single claim only if multiple are batched in one transaction set.
What you'll have to do is try some combinations of Failed Message Routing and the "Inbound batch processing option" on the Them->You tab of the Agreement, in the Local Host Settings section.
Pick the one that best suits your requirement and go from there.

I keep getting a Yahoo DNS error handler page, and can't even access the add-ons page to disable it because it redirects me to the Yahoo DNS page immediately

I have already seen some suggested solutions to the problem of this extremely annoying Yahoo DNS error solutions page, but they involve going to the add-ons page of firefox and disabling various add-ons. The issue is that even when I try to go to the add-ons page I get immediately redirected to the Yahoo DNS solutions page again.
I have cleared my browser history and cache, hoping it would help, but nothing. Extremely annoying as I never installed anything - it simply started after a Firefox upgrade.
Any help much appreciated.

Open the Help menu and choose Restart Firefox with Add-ons Disabled. Remove any offending extensions. For details, see the "Uninstall from Firefox Safe Mode" section of the following article.
* [[Cannot uninstall an add-on]]

Best error handling for visa calls?

We are using some handlers we've devloped for power supply handling (over GPIB). The power supplies are SCPI and use SCPI/GPIB commands. The handlers use the NI visa api's Read() and Write() functions to send the commands. They work fine, for the most part, and we've been using them for a number of years.
However, we're hearing reports that there may have been a few times that commands were not executed on the power supply and our handler did not report back any error.
So, I'm trying to update these handlers to add a little error checking to make them more robust and hopefully we'll catch this error if it happens again.
For error handling, I've come up with 3 solutions and tried all 3. I find some benefits and drawbacks with each and hoped I could get your opinions about error handling as I'm not overly familiar with some of the methods.
Method 1:
Set the Event Status Enable register to catch all events (or all that I care about).
Read status byte (STB?) after each command and check the event bit and then event status bit if event bit set.
Drawback1: I have one power supply that does not implement this correctly and a second type that appears to not be working correctly either.
Drawback2: Errors are generic. I'll know if I got, for example, a DDE (Device Dependant Error), but I won't know more detail than that.
Method 2:
After each command sent, read the error queue with the System:Error? query.
Drawback: It seems I get a lot of messages back in this method that aren't real errors. It's very "noisy" and I have no way to distinguish real errors from "noise" messages like "query interrupted" and such.
Method 3:
Check the return code of the Visa Read() and Write() commands. At first I didn't think this was very robust, but after seeing the list of errors here, I'm beginning to think that these might be more robust and detailed than Method 1. However, I'm not sure.
So is method 3 as robust as it looks, or is there a combination/comprimise I can make, or another method I did not mention which is best to trap errors from Visa Reads/Writes to these GPIB power supplies? Keep in mind that the handlers work for a number of different power supplies and its likely that some things may be implemented differently between supplies....so its best to stick with somethind standard that will work on all power supplies.

Hi KingTermite,
I hope you will got answer of the question and may be implemeted something .It was really a nice discussion .I am also facing the same issue where I am communicating with different instrument using GPIB communication and RS 232 too.
Can you share and discuss about the implementation of your initiative.
Best Regards
Regards:
Vaibhav Kanchan
Sr. Engineer
NI Certified LabVIEW Developer(CLD)
NI Certified TestStand Developer(CTD}

General Error handling

I've managed to get myself confused with error handling in Forms 6i.
If I have a trigger that does a 'commit-form' like this
commit_form;
IF NOT form_success THEN
RAISE form_trigger_failure;
END IF;
EXCEPTION
WHEN OTHERS THEN;
END;
and the commit_form fails due to a mandatory field being missing (or similar) then what happens first?
Does my ON-ERROR trigger fire?
Does the form_success check fail and raise form_trigger failure?
Does my exception block get used?
Or does more than 1 happen??
I could - of course - find the answer to this through debug but I'm looking for a more generic answer if possible.
Thanks - Sean.

What happens first? The forms validation process runs and informs user that the field is required.
Does On-Error fire? Yes, if you have one in your form.
Does the form_success check fail and raise form_trigger failure? Yes -- but ONLY if your On-error raises Form_trigger_failure. If it does not, you have lots of problems.
Does my exception block get used? Yes. Raising Form_trigger_failure causes control to pass to the exception handler. But I never use an exception handler except when I code SQL commands.
Now... After commit_form, you should also check Form_Status. Read the help topic on the Form_Success built-in.
My standard C00_Commit program unit does this:
COMMIT_FORM;
IF :SYSTEM.FORM_STATUS <> 'QUERY'
OR NOT FORM_SUCCESS THEN
RAISE FORM_TRIGGER_FAILURE;
END IF;
END;

Getting sequence filename and sequence name in process model error handler

We are using the sequential process model and would like to log sequence step error information to a file. We have an Error Handler callback in SequentialModel.seq and that is where we will write to the error file. In the Error Handler callback, I can get the error container info for the step where the error occurs and the name of the that step thru the Error Handler Step parameter. I would also like to record the sequence file and the sequence where the error occurred, but I have not been able to find those in the sequence context. I know they are available because the TestStand RunTime Error dialog box displays them. How can I access the name of the sequence file and the name of the sequence where the error occurred?
Thanks,
Hans

Hey hans,
Use the API. Since you already have the Step object reference coming in as a parameter you can just use a few ActiveX steps to get the Sequence File and Sequence from which the error was thrown.
Step.Sequence
Sequence.Name (gets the name of the sequence)
Sequence.SequenceFile
SequenceFile.Path (gets the path of the sequence file)
So basically just 4 activex steps. I hope this helps.
Regards,
jigg
CTA, CLA
teststandhelp.com
~Will work for kudos and/or BBQ~

Getting Output filename and extension same as the incoming filename and extension

I need to create a SFTP send port where I should get the output file name and extension same as that of the incoming filename
I had set the filename in the send port as "%SourceFileName%" but this did not work.
I have also assigned the input filename (without extension) in a variable in orchestartion. Is there any way i could get the output filename and extension same as that of the incoming message?
Any help would be much appreciated

Hi,
The %SourceFileName% macro maps to the context property BTS.ReceiveFileName that travels with your message in the context. So in order for this macro to work in a send port the message that is going out needs to have this BTS.ReceiveFileName property on
the context. You probably creating a new message in your orchestration and sending that out. The new message does not have the property on its context which makes it fail. Use a message assignment shape in your orchestration to set the context property for
the message going out:
MyMessage(BTS.ReceiveFileName) = OrigMessage(BTS.ReceiveFileName);
Then %SourceFileName% macro will work at send port.
Rachit
Please mark as answer or vote as helpful if my reply does

Error handling workflow not getting triggered

Hi all,
I'm creating a outbound IDoc. And for error handling workflow.. I created a organization structure in PPOME and assigned users. I gave this position number thus created in the partner profile in post processing permitted agent tab.
But when the Idoc is in error, this is not coming to my inbox.
Can someone please help me with this.. and let me know what went wrong.
Thanks in advance.

Here you need to be careful,
if the agent assignment is not maintained properly, there may be a chance everyone in the organization will get the item.
I hope you have created a single workitem for error handling. goto additional data-> agent assignment-> maintain. make sure the attribute is defined as general forwarding allowed. or you maintain the role/position/user/whatever.as the possible agents. still you dont get the result, debugging the default rule in the task ->default rule -> agent.
hope this helps.
with regards,
Sudhahar R

Why do I get a "NullReferenceException was not handled by user code" error in one situation but not in the other?

We are using Sharepoint 2010 and Infopath 2010. In my form, I have a Managed Metadata field that I need to test for a Null value. I found, with the help of this forum's participatns, that a [field]_Changed event for one MMD field runs multiple
time because of the underlying XML elements (Terms, TermInfo, TermName, TermId). So I'm trying to figure out how to test the XML to see when the TermName has a value. By doing this, I hope to limit when the additional code in my form runs, i.e.
I'll only trigger it when TermName is not null.
Just to test for null/empty (before doing anything that calls the addtional code) when I run this code, it completes correctly but always shows a message box:
Dim strTest As String = Me.CreateNavigator.SelectSingleNode("/pr:properties/p:properties/documentManagement/ns2:h2b59c4ae4144c01973b1d8571d217ad", Me.NamespaceManager).InnerXml
            If String.IsNullOrEmpty(strTest) Then
            Else
                MessageBox.Show("This is the value of the States InnerXML   " & strTest)
            End If
But when I run this code, I get a "NullReferenceException was not handled by user code. Object reference not set to an instance of an object" at the "Dim strTest..." line:
   Dim strTest As String = Me.CreateNavigator.SelectSingleNode("/pr:properties/p:properties/documentManagement/ns2:h2b59c4ae4144c01973b1d8571d217ad/pc:Terms/pc:TermInfo/pc:TermName", Me.NamespaceManager).InnerXml
            If String.IsNullOrEmpty(strTest) Then
            Else
                MessageBox.Show("This is the value of the States InnerXML   " & strTest)
            End If
Can any one explain why drilling down like this gives me this error? And can you tell me how to get around it so I can limit how many times the code in my Infopath form needs to run?
Thanks in advance. Carol.

Never mind, I think I've got it figured out. When I do it this way, I get to the If Not...Nothing at the correct time. Thanks for sending me down the correct path, Scott. Carol.:
Dim
firstStr As
String =
String.Empty
Dim xNav
As XPathNavigator = MainDataSource.CreateNavigator()
Dim xFirst
As XPathNavigator = xNav.SelectSingleNode("/pr:properties/p:properties/documentManagement/ns2:h2b59c4ae4144c01973b1d8571d217ad/pc:Terms/pc:TermInfo/pc:TermName",
Me.NamespaceManager)
If
Not xFirst
Is
Nothing
Then
Dim strxFirst
As
String = xFirst.InnerXml
                MessageBox.Show(
"Value of InnerXML   " & strxFirst)
Else
                MessageBox.Show(
"Empty or Null")
End
If

Error: error getting ticket: how best to handle?

i periodically have this error thrown:
AFCS Beta Build # : 0.92
requestInfo http://connectnow.acrobat.com/sequoya2/20090624132213-2-defaultroomname?exx=eDpiaW5nbzo6c2 VxdW95YTI6MjoyMDA5MDYyNDEzNDY1OC0yLWRlZmF1bHRyb29tbmFtZToxMDA6NzU1MTg1MzFlZWFhNzM1Y2Y0YWZm OGUzZjk5MDVlOTRlMGNjNGI1Yw==&mode=xml&x=0.2523019351065159
#THROWING ERROR# onComplete status code not ok. Status: <error>
Error: error getting ticket: [Event type="error" bubbles=false cancelable=false eventPhase=2]
    at com.adobe.rtc.session.managers::SessionManagerAdobeHostedServices/onTicketError()[C:\work \main\connect\cocomoPlayer10\src\com\adobe\rtc\session\managers\SessionManagerAdobeHostedS ervices.as:106]
    at flash.events::EventDispatcher/dispatchEventFunction()
    at flash.events::EventDispatcher/dispatchEvent()
    at com.adobe.rtc.session.sessionClasses::SingleUseTicketService/onComplete()[C:\work\main\co nnect\cocomoPlayer10\src\com\adobe\rtc\session\sessionClasses\SingleUseTicketService.as:79 ]
    at flash.events::EventDispatcher/dispatchEventFunction()
    at flash.events::EventDispatcher/dispatchEvent()
    at flash.net::URLLoader/onComplete()
what the best way to catch and deal with this?

I got this too when trying to externally login to a new room - it turned out that my room name was constructed using camel case but AFCS changed this to lowercase preventing correct room identification.
It works now.

Why am I getting so many runtime errors? (IO handling)

Here is what I am trying to do. The user of my GUI types a name in a text field an then presses a button. Then a file is created with that name, and with whatever he typed in the text field in it. Note: the extension is not typed!
But for some reason I get so many runtime errors in the prompt. I would list them except I can't see them all. Here is the important part of my code. Add is the button the user presses to add the file name; and it is located in the an actionEvent method. Here is the cod:
else if(e.getSource() == add){
     String s;
     try{
          firstNameS = field.getText();
          FileWriter Write = new FileWriter(s+".txt");
          BufferedWriter write2 = new BufferedWriter(Write);
          write2.write(firstNameS);
          write2.flush();
          Write.flush();
          write2.close();
          Write.close();
          } catch(IOException exeption) {}
}Could someone please tell me what i am doing wrong? This code compiles perfectly.
Thanks.
Virum

Thanks abnormal! I have the full exception. I have no idea what it means but here it is:
Exception occurred during event dispatching:
java.lang.NullPointerException
     at AddressBook.actionPerformed(AddressBook.java:236)
     at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1450)
     at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(AbstractButton.java:1504)
     at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:378)
     at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:250)
     at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:216)
     at java.awt.Component.processMouseEvent(Component.java:3715)
     at java.awt.Component.processEvent(Component.java:3544)
     at java.awt.Container.processEvent(Container.java:1164)
     at java.awt.Component.dispatchEventImpl(Component.java:2593)
     at java.awt.Container.dispatchEventImpl(Container.java:1213)
     at java.awt.Component.dispatchEvent(Component.java:2497)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:2451)
     at java.awt.LightweightDispatcher.processMouseEvent(Container.java:2216)
     at java.awt.LightweightDispatcher.dispatchEvent(Container.java:2125)
     at java.awt.Container.dispatchEventImpl(Container.java:1200)
     at java.awt.Window.dispatchEventImpl(Window.java:914)
     at java.awt.Component.dispatchEvent(Component.java:2497)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:339)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:131)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:98)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:93)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:85)Does any one know what this means?

Error Handling when excel vba code does not find the file

Hi Below is my code:
file1 = Dir("Q:\Budget\Historical Budgets\" & new_dept_folder & "\*.xls*")
col = 2
col_new = 3
Application.DisplayAlerts = False
While (file1 <> "")
        filename = Left$(file1, 6)
        ' Open the newly selected workbook
        Set wb = Workbooks.Open("Q:\Budget\Historical Budgets\" & new_dept_folder & "\" & file1)
        udds = filename & " - " & wb.Sheets("Budget").Range("J1").Value
        ThisWorkbook.Sheets(1).Cells(1, col).Value = udds
        For x = LBound(data_new) To UBound(data_new)
            wb.Sheets("Budget").Select
            Range(data_new(x)).Select
            Selection.Copy
            ThisWorkbook.Sheets(1).Cells(x + 5, col_new).PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks:=False, Transpose:=False
        Next x
         ' Close the current workbook
        wb.Close SaveChanges:=False
        On Error GoTo Errhandler
        Set wb_old = Workbooks.Open("Q:\Budget\Historical Budgets\" & old_dept_folder & "\" & file1)
<--- Need Error handling on this line (i.e. if I get error here)
        For x = LBound(data) To UBound(data)
            wb_old.Sheets("Budget").Select
            Range(data(x)).Select
            Selection.Copy
            ThisWorkbook.Sheets(1).Cells(x + 5, col).PasteSpecial Paste:=xlPasteValues, Operation:=xlNone,   SkipBlanks:=False, Transpose:=False
        Next x
        Application.CutCopyMode = False
        ' Close the current workbook
        On Error Resume Next
        wb_old.Close SaveChanges:=False
Errhandler:
        For x = LBound(data) To UBound(data)
        ThisWorkbook.Sheets(1).Cells(x + 5, col).Value = 0
        Next x
        ' Select the next file in the dir array
        file1 = Dir
        col = col + 5
        col_new = col_new + 5
Wend
Everytime I run the code the errhandler which I don't need. Could you please help me on this.
Regards, Hitesh

Hi,
You could check whether the file is exist, then open it.
If Dir(path)<>”” Then
There are three On Error Statements, On Error GoTo <line>, On Error Resume Next and On Error GoTo 0.
More information, please refer to:
# How to Use "On Error" to Handle Errors in a Macro
https://support.microsoft.com/en-us/kb/141571?wa=wsignin1.0
Regards
Starain
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Error handling of Assignments in Workflow...

Hi All,
How we do we automate assignment's error handling in Workflow.
For example: I have an assignment and that is part of my workflow.
If the assignment fails the workflow job status gets "Error" status --> How do we handle this by sending some notification or branch into success or failure?
Please feel free to revert to me.
thanks
Alexander.

Hi Alexander,
MDM Assignment is not like Validation based on which you can branch out your process based on the validation result.
Assignment will assign a value to the desired field based on the expression you write.
So you need to take care that your expression handles all the incoming records fully and does not fail.
Hope It Helped
Thanks & Regards
Simona Pinto

Biztalk server Database tables whether contains the incoming filename.

Hi,
I have a requirement to log these informations EDI 834 filename and Duplicate filename with three conditions like wrong Duplicate control number,Sender/Receiver ID mismatch,Wrong ISA and IEA control number.
Whether these below default DBS will log the File proceesing with its information like above. If so i need to know which DB table it has the information like FileName,Duplicate filename,Error in 832 format files like said above.
BizTalkMgmtDb,
BizTalkMsgBoxDb,
BizTalkDTADb,
BizTalkRuleEngineDb,
BAMStarSchema,
BAMPrimaryImport,
BAMAlertsNSMain,
BAMAlertsApplication,
BAMArchive,
BAMAnalysis.
Thanks,
Vijayan
vijayan

This is the third thread on the same subject. See the original:
http://social.msdn.microsoft.com/Forums/en-US/48d36e31-56cc-479d-8920-6e62e835c335/how-to-get-the-incoming-filename-and-store-it-to-sql-table-using-biztalk-server-2013?forum=biztalkediandas2#48d36e31-56cc-479d-8920-6e62e835c335

LV7.1 Strange behavior with Automatic Error Handling occuring when it shouldn't [LV 7.1 Pro on WinXP for Tablet PC's]

[LV 7.1 Pro on WinXP for Tablet PC's]
I recently let a rather large LV app of mine run in the development environment while I was out for a couple of days. Upon returning I found that the app had hung for ~22 hours waiting for an answer to an Automatic Error Handling (AEH) dialog proclaiming an Error 7 in New File without any indication of the VI hierarchy that called New File. I set about ensuring that AEH dialogs would not pop up and have not been able to discover how I could have possibly received one in the first place.
Subsequent investigation revealed:
Neither AEH option in Options>Block Diagrams were checked.
Network problems had occurred around the time that the app had hung. All file paths are network paths when running in the development environment, so the cause of the error was most likely valid, even if the AEH dialog appearance wasn't.
My app has only one instance where the New File primitive is used by me. That subVI and all others above it in the hierarchy DO NOT have the AEH property enabled. The error out cluster of New File in my subvi is wired.
My app has three instances where New File is called from a vi.lib vi (Open/Create/Replace File.vi, Open Config Data.vi, and Prompt Web Browser Path.vi), none of which have the AEH property enabled. Nor does any of their calling VI's. All three instances also have their error out cluster wired.
A utility to examine the AEH property of all VI's (with all top level and dynamic VI's loaded) in memory reported that only 1 of 308 vi's ( RGT Does File Exists.vi from the Report Generation Toolkit) had that property true. That vi has no subVI's other than the File/Directory Info primitive and no calling VI's in common with any of the vi's that call New File, except a top level VI.
As long as 'Enable automatic error handling dialogs' remains unselected in options>block diagram, I am unable to get an AEH dialog for either the New File or File/Directory Info primitives in a test VI with AEH property enabled and their error out clusters unwired no matter what invalid path I pass to the functions. As soon as the options>block diagram>Enable AEH dialogs' is selected, both primitives fire AEH dialogs with no error out wired and don't when wired. i.e. works as advertised.
In other words I can find no reason why I should have gotten the problem AEH dialog...
I cannot afford for this app to hang because of a network problem, other portions of the app that were running concurrently correctly handled the error and, had the AEH dialog not appeared, the app would have made corrections or shutdown in an orderly fashion.
Any ideas?

Very good.
Write Characters to File.vi>Open/Create/Replace File.vi>New File
New File throws the error. Open/Create/Replace strips the hierarchy from the source of the error. Write Characters passes it to the General Error Handler. I never looked above O/C/R file in the hierarchy except for enable automatic error handling property. The tip-off should have been to realize that O/C/R file was stripping the hierarchy from the error and look above that.
The real irony is that Write Characters was being used to log error cluster data to an error log file...
Save as... Copy without updating... the OEM 'Write Characters to File' is gone from this app.
Thanx (a bunch)

Getting incoming filename in error handling orchestration

Similar Messages

Maybe you are looking for